Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 b7d2280c 编写于 作者: A Andrew Vasquez 提交者： James Bottomley
浏览文件
操作

[SCSI] qla2xxx: Cleanup FCP-command-status processing debug statements. 

Migrate to a consistent set of debug entries during status-IOCB
handling:

* group CS_TIMEOUT handling with CS_PORT_UNAVAILABLE and the like
  (more regrouping of common behaviour).

* drop CS_DATA_OVERRUN handling as it now falls into the
  'default' case (still returns DID_ERROR).

* consolidate CS_RESET and CS_ABORTED handling, as we the only
  functional difference was a printk() (still returns DID_RESET).

* dropped all the earlier inconsistent [qla_]printk()s sprinkled
  throught the needlessly large case-statement.  Failure case
  I/Os are now logged with a 'standard' format:

	<command failure details>
	<command generic details>

  so, for example a dropped-frame is logged as:

	qla2xxx 0000:13:00.0: scsi(16:0:0) Dropped frame(s) detected (4000 of 4000 bytes).
	qla2xxx 0000:13:00.0: scsi(16:0:0) FCP command status: 0x15-0x18 (70018) \
    oxid=78 ser=76 cdb=280000 len=4000 rsp_info=0 resid=0 fw_resid=4000

  which should now convey all relevant information.
Signed-off-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
上级 5ff1d584
隐藏空白更改
内联 并排
Showing with 63 addition and 129 deletion
drivers/scsi/qla2xxx/qla_isr.c
浏览文件 @ b7d2280c
......@@ -1283,6 +1283,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
struct sts_entry_24xx *sts24;
uint16_t comp_status;
uint16_t scsi_status;
uint16_t ox_id;
uint8_t lscsi_status;
int32_t resid;
uint32_t sense_len, rsp_info_len, resid_len, fw_resid_len;
......@@ -1291,6 +1292,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
uint32_t handle;
uint16_t que;
struct req_que *req;
int logit = 1;
sts = (sts_entry_t *) pkt;
sts24 = (struct sts_entry_24xx *) pkt;
......@@ -1320,9 +1322,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
sp = NULL;
if (sp == NULL) {
DEBUG2(printk("scsi(%ld): Status Entry invalid handle.\n",
vha->host_no));
qla_printk(KERN_WARNING, ha, "Status Entry invalid handle.\n");
qla_printk(KERN_WARNING, ha,
"scsi(%ld): Invalid status handle (0x%x).\n", vha->host_no,
sts->handle);
set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
qla2xxx_wake_dpc(vha);
......@@ -1330,10 +1332,9 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
}
cp = sp->cmd;
if (cp == NULL) {
DEBUG2(printk("scsi(%ld): Command already returned back to OS "
"pkt->handle=%d sp=%p.\n", vha->host_no, handle, sp));
qla_printk(KERN_WARNING, ha,
"Command is NULL: already returned to OS (sp=%p)\n", sp);
"scsi(%ld): Command already returned (0x%x/%p).\n",
vha->host_no, sts->handle, sp);
return;
}
......@@ -1342,6 +1343,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
fcport = sp->fcport;
ox_id = 0;
sense_len = rsp_info_len = resid_len = fw_resid_len = 0;
if (IS_FWI2_CAPABLE(ha)) {
if (scsi_status & SS_SENSE_LEN_VALID)
......@@ -1355,6 +1357,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
rsp_info = sts24->data;
sense_data = sts24->data;
host_to_fcp_swap(sts24->data, sizeof(sts24->data));
ox_id = le16_to_cpu(sts24->ox_id);
} else {
if (scsi_status & SS_SENSE_LEN_VALID)
sense_len = le16_to_cpu(sts->req_sense_length);
......@@ -1371,17 +1374,13 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
if (IS_FWI2_CAPABLE(ha))
sense_data += rsp_info_len;
if (rsp_info_len > 3 && rsp_info[3]) {
DEBUG2(printk("scsi(%ld:%d:%d:%d) FCP I/O protocol "
"failure (%x/%02x%02x%02x%02x%02x%02x%02x%02x)..."
"retrying command\n", vha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, rsp_info_len, rsp_info[0],
rsp_info[1], rsp_info[2], rsp_info[3], rsp_info[4],
rsp_info[5], rsp_info[6], rsp_info[7]));
DEBUG2(qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d): FCP I/O protocol failure "
"(0x%x/0x%x).\n", vha->host_no, cp->device->id,
cp->device->lun, rsp_info_len, rsp_info[3]));
cp->result = DID_BUS_BUSY << 16;
qla2x00_sp_compl(ha, sp);
return;
goto out;
}
}
......@@ -1408,12 +1407,10 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
((unsigned)(scsi_bufflen(cp) - resid) <
cp->underflow)) {
qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d:%d): Mid-layer underflow "
"detected (%x of %x bytes)...returning "
"error status.\n", vha->host_no,
cp->device->channel, cp->device->id,
cp->device->lun, resid,
scsi_bufflen(cp));
"scsi(%ld:%d:%d): Mid-layer underflow "
"detected (0x%x of 0x%x bytes).\n",
vha->host_no, cp->device->id,
cp->device->lun, resid, scsi_bufflen(cp));
cp->result = DID_ERROR << 16;
break;
......@@ -1422,12 +1419,12 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
cp->result = DID_OK << 16 | lscsi_status;
if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
DEBUG2(printk(KERN_INFO
"scsi(%ld): QUEUE FULL status detected "
"0x%x-0x%x.\n", vha->host_no, comp_status,
scsi_status));
DEBUG2(qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d) QUEUE FULL detected.\n",
vha->host_no, cp->device->id, cp->device->lun));
break;
}
logit = 0;
if (lscsi_status != SS_CHECK_CONDITION)
break;
......@@ -1439,23 +1436,14 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
break;
case CS_DATA_UNDERRUN:
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d) UNDERRUN status detected 0x%x-0x%x. "
"resid=0x%x fw_resid=0x%x cdb=0x%x os_underflow=0x%x\n",
vha->host_no, cp->device->id, cp->device->lun, comp_status,
scsi_status, resid_len, fw_resid_len, cp->cmnd[0],
cp->underflow));
/* Use F/W calculated residual length. */
resid = IS_FWI2_CAPABLE(ha) ? fw_resid_len : resid_len;
scsi_set_resid(cp, resid);
if (scsi_status & SS_RESIDUAL_UNDER) {
if (IS_FWI2_CAPABLE(ha) && fw_resid_len != resid_len) {
DEBUG2(printk(
"scsi(%ld:%d:%d:%d) Dropped frame(s) "
"detected (%x of %x bytes)...residual "
"length mismatch...retrying command.\n",
vha->host_no, cp->device->channel,
DEBUG2(qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d) Dropped frame(s) detected "
"(0x%x of 0x%x bytes).\n", vha->host_no,
cp->device->id, cp->device->lun, resid,
scsi_bufflen(cp)));
......@@ -1467,21 +1455,18 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
((unsigned)(scsi_bufflen(cp) - resid) <
cp->underflow)) {
qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d:%d): Mid-layer underflow "
"detected (%x of %x bytes)...returning "
"error status.\n", vha->host_no,
cp->device->channel, cp->device->id,
"scsi(%ld:%d:%d): Mid-layer underflow "
"detected (0x%x of 0x%x bytes).\n",
vha->host_no, cp->device->id,
cp->device->lun, resid, scsi_bufflen(cp));
cp->result = DID_ERROR << 16;
break;
}
} else if (!lscsi_status) {
DEBUG2(printk(
"scsi(%ld:%d:%d:%d) Dropped frame(s) detected "
"(%x of %x bytes)...firmware reported underrun..."
"retrying command.\n", vha->host_no,
cp->device->channel, cp->device->id,
DEBUG2(qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d) Dropped frame(s) detected (0x%x "
"of 0x%x bytes).\n", vha->host_no, cp->device->id,
cp->device->lun, resid, scsi_bufflen(cp)));
cp->result = DID_ERROR << 16;
......@@ -1489,6 +1474,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
}
cp->result = DID_OK << 16 | lscsi_status;
logit = 0;
/*
* Check to see if SCSI Status is non zero. If so report SCSI
......@@ -1496,10 +1482,11 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
*/
if (lscsi_status != 0) {
if (lscsi_status == SAM_STAT_TASK_SET_FULL) {
DEBUG2(printk(KERN_INFO
"scsi(%ld): QUEUE FULL status detected "
"0x%x-0x%x.\n", vha->host_no, comp_status,
scsi_status));
DEBUG2(qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d) QUEUE FULL detected.\n",
vha->host_no, cp->device->id,
cp->device->lun));
logit = 1;
break;
}
if (lscsi_status != SS_CHECK_CONDITION)
......@@ -1513,109 +1500,56 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
}
break;
case CS_DATA_OVERRUN:
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d): OVERRUN status detected 0x%x-0x%x\n",
vha->host_no, cp->device->id, cp->device->lun, comp_status,
scsi_status));
DEBUG2(printk(KERN_INFO
"CDB: 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n",
cp->cmnd[0], cp->cmnd[1], cp->cmnd[2], cp->cmnd[3],
cp->cmnd[4], cp->cmnd[5]));
DEBUG2(printk(KERN_INFO
"PID=0x%lx req=0x%x xtra=0x%x -- returning DID_ERROR "
"status!\n",
cp->serial_number, scsi_bufflen(cp), resid_len));
cp->result = DID_ERROR << 16;
break;
case CS_PORT_LOGGED_OUT:
case CS_PORT_CONFIG_CHG:
case CS_PORT_BUSY:
case CS_INCOMPLETE:
case CS_PORT_UNAVAILABLE:
/*
* If the port is in Target Down state, return all IOs for this
* Target with DID_NO_CONNECT ELSE Queue the IOs in the
* retry_queue.
*/
DEBUG2(printk("scsi(%ld:%d:%d): status_entry: Port Down "
"pid=%ld, compl status=0x%x, port state=0x%x\n",
vha->host_no, cp->device->id, cp->device->lun,
cp->serial_number, comp_status,
atomic_read(&fcport->state)));
case CS_TIMEOUT:
/*
* We are going to have the fc class block the rport
* while we try to recover so instruct the mid layer
* to requeue until the class decides how to handle this.
*/
cp->result = DID_TRANSPORT_DISRUPTED << 16;
if (comp_status == CS_TIMEOUT) {
if (IS_FWI2_CAPABLE(ha))
break;
else if ((le16_to_cpu(sts->status_flags) &
SF_LOGOUT_SENT) == 0)
break;
}
DEBUG2(qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d) Port down status: port-state=0x%x\n",
vha->host_no, cp->device->id, cp->device->lun,
atomic_read(&fcport->state)));
if (atomic_read(&fcport->state) == FCS_ONLINE)
qla2x00_mark_device_lost(fcport->vha, fcport, 1, 1);
break;
case CS_RESET:
DEBUG2(printk(KERN_INFO
"scsi(%ld): RESET status detected 0x%x-0x%x.\n",
vha->host_no, comp_status, scsi_status));
cp->result = DID_RESET << 16;
break;
case CS_ABORTED:
/*
* hv2.19.12 - DID_ABORT does not retry the request if we
* aborted this request then abort otherwise it must be a
* reset.
*/
DEBUG2(printk(KERN_INFO
"scsi(%ld): ABORT status detected 0x%x-0x%x.\n",
vha->host_no, comp_status, scsi_status));
cp->result = DID_RESET << 16;
break;
case CS_TIMEOUT:
/*
* We are going to have the fc class block the rport
* while we try to recover so instruct the mid layer
* to requeue until the class decides how to handle this.
*/
cp->result = DID_TRANSPORT_DISRUPTED << 16;
if (IS_FWI2_CAPABLE(ha)) {
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d:%d): TIMEOUT status detected "
"0x%x-0x%x\n", vha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, comp_status,
scsi_status));
break;
}
DEBUG2(printk(KERN_INFO
"scsi(%ld:%d:%d:%d): TIMEOUT status detected 0x%x-0x%x "
"sflags=%x.\n", vha->host_no, cp->device->channel,
cp->device->id, cp->device->lun, comp_status, scsi_status,
le16_to_cpu(sts->status_flags)));
/* Check to see if logout occurred. */
if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
qla2x00_mark_device_lost(fcport->vha, fcport, 1, 1);
break;
default:
DEBUG3(printk("scsi(%ld): Error detected (unknown status) "
"0x%x-0x%x.\n", vha->host_no, comp_status, scsi_status));
qla_printk(KERN_INFO, ha,
"Unknown status detected 0x%x-0x%x.\n",
comp_status, scsi_status);
cp->result = DID_ERROR << 16;
break;
}
/* Place command on done queue. */
out:
if (logit)
DEBUG2(qla_printk(KERN_INFO, ha,
"scsi(%ld:%d:%d) FCP command status: 0x%x-0x%x (0x%x) "
"oxid=0x%x ser=0x%lx cdb=%02x%02x%02x len=0x%x "
"rsp_info=0x%x resid=0x%x fw_resid=0x%x\n", vha->host_no,
cp->device->id, cp->device->lun, comp_status, scsi_status,
cp->result, ox_id, cp->serial_number, cp->cmnd[0],
cp->cmnd[1], cp->cmnd[2], scsi_bufflen(cp), rsp_info_len,
resid_len, fw_resid_len));
if (rsp->status_srb == NULL)
qla2x00_sp_compl(ha, sp);
}
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或