提交 b7cec13f 编写于 作者: D Dinh Nguyen 提交者: Mike Turquette

clk: socfpga: Look for the GPIO_DB_CLK by its offset

After the patch:
"clk: socfpga: Map the clk manager base address in the clock driver"

The clk->name field in socfpga_clk_recalc_rate() was getting cleared. Replace
looking for the GPIO_DB_CLK by its divider offset instead.

Also rename the define SOCFPGA_DB_CLK_OFFSET -> SOCFPGA_GPIO_DB_CLK_OFFSET, as
this represents the GPIO_DB_CLK.
Signed-off-by: NDinh Nguyen <dinguyen@altera.com>
上级 6a7e7122
......@@ -51,7 +51,7 @@
#define SOCFPGA_NAND_CLK "nand_clk"
#define SOCFPGA_NAND_X_CLK "nand_x_clk"
#define SOCFPGA_MMC_CLK "sdmmc_clk"
#define SOCFPGA_DB_CLK "gpio_db_clk"
#define SOCFPGA_GPIO_DB_CLK_OFFSET 0xA8
#define div_mask(width) ((1 << (width)) - 1)
#define streq(a, b) (strcmp((a), (b)) == 0)
......@@ -234,7 +234,8 @@ static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk,
else if (socfpgaclk->div_reg) {
val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
val &= div_mask(socfpgaclk->width);
if (streq(hwclk->init->name, SOCFPGA_DB_CLK))
/* Check for GPIO_DB_CLK by its offset */
if ((int)socfpgaclk->div_reg & SOCFPGA_GPIO_DB_CLK_OFFSET)
div = val + 1;
else
div = (1 << val);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册