V4L/DVB (5636): Integrate all users of the fmd1216 tuner with dvb-pll

Enhance the dvb-pll definition of the fmd1216 tuner by adding an init sequence
and a sleep sequence.

The init sequence sets the AGC control register to 0xa0, selecting the fast
time constant and 112 dBuV take-over point.  This the recommended value for
DVB-T operation.

The sleep sequence sets bit P4 (which is believed to turn the analog
demodulator on), turns off the tuning voltage, and sets the AGC control
register to 0x60 (external AGC voltage, the recommended value for analog
operation).

The existing dvb-pll users in the cx88 driver, listed below, will gain these
init and sleep sequences.

CX88_BOARD_HAUPPAUGE_HVR1100    Hauppauge WinTV-HVR1100 DVB-T/Hybrid
CX88_BOARD_HAUPPAUGE_HVR1100LP  Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profi
CX88_BOARD_WINFAST_DTV2000H     WinFast DTV2000 H
CX88_BOARD_HAUPPAUGE_HVR3000    Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DV
CX88_BOARD_HAUPPAUGE_HVR1300    Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encod

This non-dvb-pll user in the cx88 driver should only gain the sleep sequence,
as it already had an equivalent init sequence.  The non-dvb-pll code for this
user is removed.

X88_BOARD_DNTV_LIVE_DVB_T_PRO   digitalnow DNTV Live! DVB-T Pro

In these saa7134 driver, these non-dvb-pll users are converted to use dvb-pll:

SAA7134_BOARD_MD7134                    Medion 7134
SAA7134_BOARD_ASUS_EUROPA2_HYBRID       Asus Europa2 OEM

The saa7134 functions philips_fmd1216_tuner_init(),
philips_fmd1216_tuner_sleep(), and philips_fmd1216_tuner_set_params() are
deleted and the dvb-pll versions are used.

This should result in equivalent sleep, init, and tuning sequences being sent
to the tuner.

For the cxusb driver, only one board is effected:

USB_PID_MEDION_MD95700          	Medion MD95700

This board used dvb_usb_tuner_init_i2c() and dvb_usb_tuner_set_params_i2c()
for init and tuning, respectively.  These functions are effectively the same
as the dvb-pll versions.  They call a tuner pass control function defined at
the dvb-usb level, but this does not matter, as this card does not have a
tuner pass control function (only the dib3000mb does).  This board will gain
the sleep sequence, while init and tuning should be unchanged.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/dvb/dvb-usb/cxusb.c

@@ -354,14 +354,8 @@ static struct mt352_config cxusb_mt352_config = {
 /* Callbacks for DVB USB */
 static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
 {
-	u8 bpll[4] = { 0x0b, 0xdc, 0x9c, 0xa0 };
-	adap->pll_addr = 0x61;
-	memcpy(adap->pll_init, bpll, 4);
-	adap->pll_desc = &dvb_pll_fmd1216me;
-
-	adap->fe->ops.tuner_ops.init = dvb_usb_tuner_init_i2c;
-	adap->fe->ops.tuner_ops.set_params = dvb_usb_tuner_set_params_i2c;
-
+	dvb_attach(dvb_pll_attach, adap->fe, 0x61, &adap->dev->i2c_adap,
+		   &dvb_pll_fmd1216me);
 	return 0;
 }
 

drivers/media/dvb/frontends/dvb-pll.c

@@ -38,6 +38,12 @@
 	0x50 = AGC Take over point = 103 dBuV */
 static u8 tua603x_agc103[] = { 2, 0x80|0x40|0x18|0x06|0x01, 0x00|0x50 };
 
+/*	0x04 = 166.67 kHz divider
+
+	0x80 = AGC Time constant 50ms Iagc = 9 uA
+	0x20 = AGC Take over point = 112 dBuV */
+static u8 tua603x_agc112[] = { 2, 0x80|0x40|0x18|0x04|0x01, 0x80|0x20 };
+
 struct dvb_pll_desc dvb_pll_thomson_dtt7579 = {
 	.name  = "Thomson dtt7579",
 	.min   = 177000000,
@@ -285,6 +291,8 @@ struct dvb_pll_desc dvb_pll_fmd1216me = {
 	.max = 858000000,
 	.iffreq= 36125000,
 	.set   = fmd1216me_bw,
+	.initdata = tua603x_agc112,
+	.sleepdata = (u8[]){ 4, 0x9c, 0x60, 0x85, 0x54 },
 	.count = 7,
 	.entries = {
 		{ 143870000, 166667, 0xbc, 0x41 },

drivers/media/video/cx88/cx88-dvb.c

@@ -221,62 +221,6 @@ static int dntv_live_dvbt_pro_demod_init(struct dvb_frontend* fe)
 	return 0;
 }
 
-static int philips_fmd1216_pll_init(struct dvb_frontend *fe)
-{
-	struct cx8802_dev *dev= fe->dvb->priv;
-
-	/* this message is to set up ATC and ALC */
-	static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
-	struct i2c_msg msg =
-		{ .addr = dev->core->pll_addr, .flags = 0,
-		  .buf = fmd1216_init, .len = sizeof(fmd1216_init) };
-	int err;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
-		if (err < 0)
-			return err;
-		else
-			return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int dntv_live_dvbt_pro_tuner_set_params(struct dvb_frontend* fe,
-					       struct dvb_frontend_parameters* params)
-{
-	struct cx8802_dev *dev= fe->dvb->priv;
-	u8 buf[4];
-	struct i2c_msg msg =
-		{ .addr = dev->core->pll_addr, .flags = 0,
-		  .buf = buf, .len = 4 };
-	int err;
-
-	/* Switch PLL to DVB mode */
-	err = philips_fmd1216_pll_init(fe);
-	if (err)
-		return err;
-
-	/* Tune PLL */
-	dvb_pll_configure(dev->core->pll_desc, buf, params);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if ((err = i2c_transfer(&dev->core->i2c_adap, &msg, 1)) != 1) {
-
-		printk(KERN_WARNING "cx88-dvb: %s error "
-		       "(addr %02x <- %02x, err = %i)\n",
-		       __FUNCTION__, dev->core->pll_addr, buf[0], err);
-		if (err < 0)
-			return err;
-		else
-			return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
 static struct mt352_config dntv_live_dvbt_pro_config = {
 	.demod_address = 0x0f,
 	.no_tuner      = 1,
@@ -531,12 +475,11 @@ static int dvb_register(struct cx8802_dev *dev)
 		break;
 	case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
 #if defined(CONFIG_VIDEO_CX88_VP3054) || (defined(CONFIG_VIDEO_CX88_VP3054_MODULE) && defined(MODULE))
-		dev->core->pll_addr = 0x61;
-		dev->core->pll_desc = &dvb_pll_fmd1216me;
 		dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
 			&((struct vp3054_i2c_state *)dev->card_priv)->adap);
 		if (dev->dvb.frontend != NULL) {
-			dev->dvb.frontend->ops.tuner_ops.set_params = dntv_live_dvbt_pro_tuner_set_params;
+			dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
+				   &dev->core->i2c_adap, &dvb_pll_fmd1216me);
 		}
 #else
 		printk("%s: built without vp3054 support\n", dev->core->name);

drivers/media/video/saa7134/saa7134-dvb.c

@@ -432,135 +432,6 @@ static struct tda1004x_config philips_europa_config = {
 
 /* ------------------------------------------------------------------ */
 
-static int philips_fmd1216_tuner_init(struct dvb_frontend *fe)
-{
-	struct saa7134_dev *dev = fe->dvb->priv;
-	struct tda1004x_state *state = fe->demodulator_priv;
-	u8 addr = state->config->tuner_address;
-	/* this message is to set up ATC and ALC */
-	static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
-	struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
-		return -EIO;
-	msleep(1);
-
-	return 0;
-}
-
-static int philips_fmd1216_tuner_sleep(struct dvb_frontend *fe)
-{
-	struct saa7134_dev *dev = fe->dvb->priv;
-	struct tda1004x_state *state = fe->demodulator_priv;
-	u8 addr = state->config->tuner_address;
-	/* this message actually turns the tuner back to analog mode */
-	u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0x60 };
-	struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
-	msleep(1);
-	fmd1216_init[2] = 0x86;
-	fmd1216_init[3] = 0x54;
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
-	msleep(1);
-	return 0;
-}
-
-static int philips_fmd1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
-	struct saa7134_dev *dev = fe->dvb->priv;
-	struct tda1004x_state *state = fe->demodulator_priv;
-	u8 addr = state->config->tuner_address;
-	u8 tuner_buf[4];
-	struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
-			sizeof(tuner_buf) };
-	int tuner_frequency = 0;
-	int divider = 0;
-	u8 band, mode, cp;
-
-	/* determine charge pump */
-	tuner_frequency = params->frequency + 36130000;
-	if (tuner_frequency < 87000000)
-		return -EINVAL;
-	/* low band */
-	else if (tuner_frequency < 180000000) {
-		band = 1;
-		mode = 7;
-		cp   = 0;
-	} else if (tuner_frequency < 195000000) {
-		band = 1;
-		mode = 6;
-		cp   = 1;
-	/* mid band	*/
-	} else if (tuner_frequency < 366000000) {
-		if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
-			band = 10;
-		} else {
-			band = 2;
-		}
-		mode = 7;
-		cp   = 0;
-	} else if (tuner_frequency < 478000000) {
-		if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
-			band = 10;
-		} else {
-			band = 2;
-		}
-		mode = 6;
-		cp   = 1;
-	/* high band */
-	} else if (tuner_frequency < 662000000) {
-		if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
-			band = 12;
-		} else {
-			band = 4;
-		}
-		mode = 7;
-		cp   = 0;
-	} else if (tuner_frequency < 840000000) {
-		if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
-			band = 12;
-		} else {
-			band = 4;
-		}
-		mode = 6;
-		cp   = 1;
-	} else {
-		if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
-			band = 12;
-		} else {
-			band = 4;
-		}
-		mode = 7;
-		cp   = 1;
-
-	}
-	/* calculate divisor */
-	/* ((36166000 + Finput) / 166666) rounded! */
-	divider = (tuner_frequency + 83333) / 166667;
-
-	/* setup tuner buffer */
-	tuner_buf[0] = (divider >> 8) & 0x7f;
-	tuner_buf[1] = divider & 0xff;
-	tuner_buf[2] = 0x80 | (cp << 6) | (mode  << 3) | 4;
-	tuner_buf[3] = 0x40 | band;
-
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
-		wprintk("could not write to tuner at addr: 0x%02x\n",
-			addr << 1);
-		return -EIO;
-	}
-	return 0;
-}
-
 static struct tda1004x_config medion_cardbus = {
 	.demod_address = 0x08,
 	.invert        = 1,
@@ -992,9 +863,8 @@ static int dvb_init(struct saa7134_dev *dev)
 					       &medion_cardbus,
 					       &dev->i2c_adap);
 		if (dev->dvb.frontend) {
-			dev->dvb.frontend->ops.tuner_ops.init = philips_fmd1216_tuner_init;
-			dev->dvb.frontend->ops.tuner_ops.sleep = philips_fmd1216_tuner_sleep;
-			dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params;
+			dvb_attach(dvb_pll_attach, dev->dvb.frontend, medion_cardbus.tuner_address,
+				   &dev->i2c_adap, &dvb_pll_fmd1216me);
 		}
 		break;
 	case SAA7134_BOARD_PHILIPS_TOUGH:
@@ -1123,9 +993,9 @@ static int dvb_init(struct saa7134_dev *dev)
 		if (dev->dvb.frontend) {
 			dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
 			dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
-			dev->dvb.frontend->ops.tuner_ops.init = philips_fmd1216_tuner_init;
-			dev->dvb.frontend->ops.tuner_ops.sleep = philips_fmd1216_tuner_sleep;
-			dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params;
+
+			dvb_attach(dvb_pll_attach, dev->dvb.frontend, medion_cardbus.tuner_address,
+				   &dev->i2c_adap, &dvb_pll_fmd1216me);
 		}
 		break;
 	case SAA7134_BOARD_VIDEOMATE_DVBT_200A: