Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 b7737c9b 编写于 作者: Y Yaniv Rosner 提交者： David S. Miller
浏览文件
操作

bnx2x: Split PHY functions 

Move the code into PHY oriented functions, and for that a new structure
is defines for each PHY which contain PHY properties and its own
functions. This also enables to encapsulate all PHY specific operations
into the PHY functions. During initialization, the PHYs will be probed
by the "bnx2x_phy_probe" function to detect which PHYs exist on-board,
and configure them accordingly. Note that the ext_phy_reset
implementation was incorporated in the ext_phy_init since it is actually
part of the PHY initialization procedure.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e10bc84d
展开全部 隐藏空白更改
内联 并排
Showing with 1425 addition and 853 deletion
drivers/net/bnx2x/bnx2x_ethtool.c
浏览文件 @ b7737c9b
......@@ -52,39 +52,14 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->duplex = -1;
}
if (bp->link_params.switch_cfg == SWITCH_CFG_10G) {
u32 ext_phy_type =
XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
if (bp->link_params.num_phys > 0) {
if (bp->link_params.phy[bp->link_params.num_phys - 1].
supported & SUPPORTED_FIBRE)
cmd->port = PORT_FIBRE;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
else
cmd->port = PORT_TP;
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
BNX2X_ERR("XGXS PHY Failure detected 0x%x\n",
bp->link_params.ext_phy_config);
break;
default:
DP(NETIF_MSG_LINK, "BAD XGXS ext_phy_config 0x%x\n",
bp->link_params.ext_phy_config);
break;
}
} else
cmd->port = PORT_TP;
DP(NETIF_MSG_LINK, "No media found\n");
cmd->phy_address = bp->mdio.prtad;
cmd->transceiver = XCVR_INTERNAL;
......
drivers/net/bnx2x/bnx2x_link.c
浏览文件 @ b7737c9b
此差异已折叠。
drivers/net/bnx2x/bnx2x_link.h
浏览文件 @ b7737c9b
......@@ -46,6 +46,15 @@
#define SFP_EEPROM_PART_NO_ADDR 0x28
#define SFP_EEPROM_PART_NO_SIZE 16
#define PWR_FLT_ERR_MSG_LEN 250
#define XGXS_EXT_PHY_TYPE(ext_phy_config) \
((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK)
#define XGXS_EXT_PHY_ADDR(ext_phy_config) \
(((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> \
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT)
#define SERDES_EXT_PHY_TYPE(ext_phy_config) \
((ext_phy_config) & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK)
/* Single Media Direct board is the plain 577xx board with CX4/RJ45 jacks */
#define SINGLE_MEDIA_DIRECT(params) (params->num_phys == 1)
/* Single Media board contains single external phy */
......@@ -58,6 +67,10 @@
#define MAX_PHYS 2
/* Same configuration is shared between the XGXS and the first external phy */
#define LINK_CONFIG_SIZE (MAX_PHYS - 1)
#define LINK_CONFIG_IDX(_phy_idx) ((_phy_idx == INT_PHY) ? \
0 : (_phy_idx - 1))
/***********************************************************/
/* bnx2x_phy struct */
/* Defines the required arguments and function per phy */
......@@ -66,13 +79,88 @@ struct link_vars;
struct link_params;
struct bnx2x_phy;
typedef u8 (*config_init_t)(struct bnx2x_phy *phy, struct link_params *params,
struct link_vars *vars);
typedef u8 (*read_status_t)(struct bnx2x_phy *phy, struct link_params *params,
struct link_vars *vars);
typedef void (*link_reset_t)(struct bnx2x_phy *phy,
struct link_params *params);
typedef void (*config_loopback_t)(struct bnx2x_phy *phy,
struct link_params *params);
typedef u8 (*format_fw_ver_t)(u32 raw, u8 *str, u16 *len);
typedef void (*hw_reset_t)(struct bnx2x_phy *phy, struct link_params *params);
typedef void (*set_link_led_t)(struct bnx2x_phy *phy,
struct link_params *params, u8 mode);
struct bnx2x_phy {
u32 type;
/* Loaded during init */
u8 addr;
u8 flags;
/* Require HW lock */
#define FLAGS_HW_LOCK_REQUIRED (1<<0)
/* No Over-Current detection */
#define FLAGS_NOC (1<<1)
/* Fan failure detection required */
#define FLAGS_FAN_FAILURE_DET_REQ (1<<2)
/* Initialize first the XGXS and only then the phy itself */
#define FLAGS_INIT_XGXS_FIRST (1<<3)
u8 def_md_devad;
u8 reserved;
/* preemphasis values for the rx side */
u16 rx_preemphasis[4];
/* preemphasis values for the tx side */
u16 tx_preemphasis[4];
/* EMAC address for access MDIO */
u32 mdio_ctrl;
u32 supported;
u32 media_type;
#define ETH_PHY_UNSPECIFIED 0x0
#define ETH_PHY_SFP_FIBER 0x1
#define ETH_PHY_XFP_FIBER 0x2
#define ETH_PHY_DA_TWINAX 0x3
#define ETH_PHY_BASE_T 0x4
#define ETH_PHY_NOT_PRESENT 0xff
/* The address in which version is located*/
u32 ver_addr;
u16 req_flow_ctrl;
u16 req_line_speed;
u32 speed_cap_mask;
u16 req_duplex;
u16 rsrv;
/* Called per phy/port init, and it configures LASI, speed, autoneg,
duplex, flow control negotiation, etc. */
config_init_t config_init;
/* Called due to interrupt. It determines the link, speed */
read_status_t read_status;
/* Called when driver is unloading. Should reset the phy */
link_reset_t link_reset;
/* Set the loopback configuration for the phy */
config_loopback_t config_loopback;
/* Format the given raw number into str up to len */
format_fw_ver_t format_fw_ver;
/* Reset the phy (both ports) */
hw_reset_t hw_reset;
/* Set link led mode (on/off/oper)*/
set_link_led_t set_link_led;
};
/* Inputs parameters to the CLC */
......@@ -106,38 +194,23 @@ struct link_params {
#define SWITCH_CFG_10G PORT_FEATURE_CON_SWITCH_10G_SWITCH
#define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT
u16 hw_led_mode; /* part of the hw_config read from the shmem */
/* phy_addr populated by the phy_init function */
u8 phy_addr;
/*u8 reserved1;*/
u32 lane_config;
u32 ext_phy_config;
#define XGXS_EXT_PHY_TYPE(ext_phy_config) \
((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK)
#define XGXS_EXT_PHY_ADDR(ext_phy_config) \
(((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> \
PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT)
#define SERDES_EXT_PHY_TYPE(ext_phy_config) \
((ext_phy_config) & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK)
/* Phy register parameter */
u32 chip_id;
u16 xgxs_config_rx[4]; /* preemphasis values for the rx side */
u16 xgxs_config_tx[4]; /* preemphasis values for the tx side */
u32 feature_config_flags;
#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
#define FEATURE_CONFIG_BCM8727_NOC (1<<3)
/* Will be populated during common init */
struct bnx2x_phy phy[MAX_PHYS];
/* Will be populated during common init */
u8 num_phys;
u8 rsrv;
u16 hw_led_mode; /* part of the hw_config read from the shmem */
/* Device pointer passed to all callback functions */
struct bnx2x *bp;
};
......
drivers/net/bnx2x/bnx2x_main.c
浏览文件 @ b7737c9b
......@@ -1960,12 +1960,16 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
static inline void bnx2x_fan_failure(struct bnx2x *bp)
{
int port = BP_PORT(bp);
u32 ext_phy_config;
/* mark the failure */
bp->link_params.ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
bp->link_params.ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
ext_phy_config =
SHMEM_RD(bp,
dev_info.port_hw_config[port].external_phy_config);
ext_phy_config &= ~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
ext_phy_config |= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE;
SHMEM_WR(bp, dev_info.port_hw_config[port].external_phy_config,
bp->link_params.ext_phy_config);
ext_phy_config);
/* log the failure */
netdev_err(bp->dev, "Fan Failure on Network Controller has caused"
......@@ -1991,7 +1995,7 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
BNX2X_ERR("SPIO5 hw attention\n");
/* Fan failure attention */
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
switch (bp->link_params.phy[EXT_PHY1].type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
/* Low power mode is controlled by GPIO 2 */
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
......@@ -4140,7 +4144,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
return -EBUSY;
}
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
switch (bp->link_params.phy[EXT_PHY1].type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
......@@ -4299,7 +4303,7 @@ static int bnx2x_init_port(struct bnx2x *bp)
bnx2x_init_block(bp, MCP_BLOCK, init_stage);
bnx2x_init_block(bp, DMAE_BLOCK, init_stage);
switch (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config)) {
switch (bp->link_params.phy[EXT_PHY1].type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
{
u32 swap_val, swap_override, aeu_gpio_mask, offset;
......@@ -4480,7 +4484,7 @@ static int bnx2x_init_func(struct bnx2x *bp)
/* Reset PCIE errors for debug */
REG_WR(bp, 0x2114, 0xffffffff);
REG_WR(bp, 0x2120, 0xffffffff);
bnx2x_phy_probe(&bp->link_params);
return 0;
}
......@@ -6065,194 +6069,32 @@ static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp,
u32 switch_cfg)
{
int port = BP_PORT(bp);
u32 ext_phy_type;
switch (switch_cfg) {
case SWITCH_CFG_1G:
BNX2X_DEV_INFO("switch_cfg 0x%x (1G)\n", switch_cfg);
ext_phy_type =
SERDES_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
switch (ext_phy_type) {
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT:
BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_2500baseX_Full |
SUPPORTED_TP |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
bp->port.supported = 0;
switch (bp->link_params.num_phys) {
case 1:
bp->port.supported = bp->link_params.phy[INT_PHY].supported;
break;
case PORT_HW_CFG_SERDES_EXT_PHY_TYPE_BCM5482:
BNX2X_DEV_INFO("ext_phy_type 0x%x (5482)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_TP |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
case 2:
bp->port.supported = bp->link_params.phy[EXT_PHY1].supported;
break;
}
default:
BNX2X_ERR("NVRAM config error. "
"BAD SerDes ext_phy_config 0x%x\n",
bp->link_params.ext_phy_config);
if (!(bp->port.supported)) {
BNX2X_ERR("NVRAM config error. BAD phy config."
"PHY1 config 0x%x\n",
SHMEM_RD(bp,
dev_info.port_hw_config[port].external_phy_config));
return;
}
switch (switch_cfg) {
case SWITCH_CFG_1G:
bp->port.phy_addr = REG_RD(bp, NIG_REG_SERDES0_CTRL_PHY_ADDR +
port*0x10);
BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr);
break;
case SWITCH_CFG_10G:
BNX2X_DEV_INFO("switch_cfg 0x%x (10G)\n", switch_cfg);
ext_phy_type =
XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
switch (ext_phy_type) {
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
BNX2X_DEV_INFO("ext_phy_type 0x%x (Direct)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_2500baseX_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_TP |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
BNX2X_DEV_INFO("ext_phy_type 0x%x (8072)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
BNX2X_DEV_INFO("ext_phy_type 0x%x (8073)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
SUPPORTED_2500baseX_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705:
BNX2X_DEV_INFO("ext_phy_type 0x%x (8705)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706:
BNX2X_DEV_INFO("ext_phy_type 0x%x (8706)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726:
BNX2X_DEV_INFO("ext_phy_type 0x%x (8726)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727:
BNX2X_DEV_INFO("ext_phy_type 0x%x (8727)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_FIBRE |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101:
BNX2X_DEV_INFO("ext_phy_type 0x%x (SFX7101)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10000baseT_Full |
SUPPORTED_TP |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
BNX2X_DEV_INFO("ext_phy_type 0x%x (BCM848xx)\n",
ext_phy_type);
bp->port.supported |= (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full |
SUPPORTED_10000baseT_Full |
SUPPORTED_TP |
SUPPORTED_Autoneg |
SUPPORTED_Pause |
SUPPORTED_Asym_Pause);
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
BNX2X_ERR("XGXS PHY Failure detected 0x%x\n",
bp->link_params.ext_phy_config);
break;
default:
BNX2X_ERR("NVRAM config error. "
"BAD XGXS ext_phy_config 0x%x\n",
bp->link_params.ext_phy_config);
return;
}
bp->port.phy_addr = REG_RD(bp, NIG_REG_XGXS0_CTRL_PHY_ADDR +
port*0x18);
BNX2X_DEV_INFO("phy_addr 0x%x\n", bp->port.phy_addr);
......@@ -6264,8 +6106,6 @@ static void __devinit bnx2x_link_settings_supported(struct bnx2x *bp,
bp->port.link_config);
return;
}
bp->link_params.phy_addr = bp->port.phy_addr;
/* mask what we support according to speed_cap_mask */
if (!(bp->link_params.speed_cap_mask &
PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF))
......@@ -6309,25 +6149,10 @@ static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
bp->link_params.req_line_speed = SPEED_AUTO_NEG;
bp->port.advertising = bp->port.supported;
} else {
u32 ext_phy_type =
XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
if ((ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
(ext_phy_type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706)) {
/* force 10G, no AN */
bp->link_params.req_line_speed = SPEED_10000;
bp->port.advertising =
(ADVERTISED_10000baseT_Full |
bp->port.advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
break;
}
BNX2X_ERR("NVRAM config error. "
"Invalid link_config 0x%x"
" Autoneg not supported\n",
bp->port.link_config);
return;
}
break;
......@@ -6475,27 +6300,13 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
int port = BP_PORT(bp);
u32 val, val2;
u32 config;
u16 i;
u32 ext_phy_type;
u32 ext_phy_type, ext_phy_config;;
bp->link_params.bp = bp;
bp->link_params.port = port;
bp->link_params.lane_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
bp->link_params.ext_phy_config =
SHMEM_RD(bp,
dev_info.port_hw_config[port].external_phy_config);
/* BCM8727_NOC => BCM8727 no over current */
if (XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config) ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC) {
bp->link_params.ext_phy_config &=
~PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK;
bp->link_params.ext_phy_config |=
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727;
bp->link_params.feature_config_flags |=
FEATURE_CONFIG_BCM8727_NOC;
}
bp->link_params.speed_cap_mask =
SHMEM_RD(bp,
......@@ -6504,18 +6315,6 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
bp->port.link_config =
SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
/* Get the 4 lanes xgxs config rx and tx */
for (i = 0; i < 2; i++) {
val = SHMEM_RD(bp,
dev_info.port_hw_config[port].xgxs_config_rx[i<<1]);
bp->link_params.xgxs_config_rx[i << 1] = ((val>>16) & 0xffff);
bp->link_params.xgxs_config_rx[(i << 1) + 1] = (val & 0xffff);
val = SHMEM_RD(bp,
dev_info.port_hw_config[port].xgxs_config_tx[i<<1]);
bp->link_params.xgxs_config_tx[i << 1] = ((val>>16) & 0xffff);
bp->link_params.xgxs_config_tx[(i << 1) + 1] = (val & 0xffff);
}
/* If the device is capable of WoL, set the default state according
* to the HW
......@@ -6524,14 +6323,14 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
bp->wol = (!(bp->flags & NO_WOL_FLAG) &&
(config & PORT_FEATURE_WOL_ENABLED));
BNX2X_DEV_INFO("lane_config 0x%08x ext_phy_config 0x%08x"
BNX2X_DEV_INFO("lane_config 0x%08x"
" speed_cap_mask 0x%08x link_config 0x%08x\n",
bp->link_params.lane_config,
bp->link_params.ext_phy_config,
bp->link_params.speed_cap_mask, bp->port.link_config);
bp->link_params.switch_cfg |= (bp->port.link_config &
PORT_FEATURE_CONNECTED_SWITCH_MASK);
bnx2x_phy_probe(&bp->link_params);
bnx2x_link_settings_supported(bp, bp->link_params.switch_cfg);
bnx2x_link_settings_requested(bp);
......@@ -6540,14 +6339,17 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
* If connected directly, work with the internal PHY, otherwise, work
* with the external PHY
*/
ext_phy_type = XGXS_EXT_PHY_TYPE(bp->link_params.ext_phy_config);
ext_phy_config =
SHMEM_RD(bp,
dev_info.port_hw_config[port].external_phy_config);
ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)
bp->mdio.prtad = bp->link_params.phy_addr;
bp->mdio.prtad = bp->port.phy_addr;
else if ((ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) &&
(ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN))
bp->mdio.prtad =
XGXS_EXT_PHY_ADDR(bp->link_params.ext_phy_config);
XGXS_EXT_PHY_ADDR(ext_phy_config);
val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或