提交 b75bb236 编写于 作者: D David Howells

MN10300: The icache invalidate functions should disable the icache first

The icache invalidate functions should disable the icache on AM33 and wait for
it to quiesce before attempting to invalidate it, and should then wait for it
to quiesce again before reenabling it, but on AM34 they should invalidate
directly.  The same goes for the dcache invalidation, but this isn't used much.

Whilst we're at it, this can be wrapped in assembler macros to remove duplicate
code.

The AM33 manual states that:

	An operation that invalidates the cache, switches the writing mode, or
	changes the way mode must be performed after disabling the cache,
	checking the busy bit, and confirming that the cache is not in
	operation.

for the dcache [sec 2.8.3.2.1].  This is not stated so for the icache [sec
2.8.3.1.1] but the example code there suggests that it is.

Whilst the AM34 manual states that the cache must be disabled for both the
icache [sec 1.8.3.2.1] and the dcache [sec 1.8.3.2.1], the Panasonic hardware
engineers say the manual is wrong and that disabling the caches for
invalidation is wrong.

Furthermore, they say that disabling the caches on the AM34 whilst running an
SMP kernel can lead to incoherency between the various CPU caches and should
thus be avoided.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
上级 9ee21723
......@@ -15,6 +15,7 @@
#include <asm/cache.h>
#include <asm/irqflags.h>
#include <asm/cacheflush.h>
#include "cache.inc"
#define mn10300_local_dcache_inv_range_intr_interval \
+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
......@@ -62,10 +63,7 @@ mn10300_local_icache_inv:
btst CHCTR_ICEN,d0
beq mn10300_local_icache_inv_end
# invalidate
or CHCTR_ICINV,d0
movhu d0,(a0)
movhu (a0),d0
invalidate_icache 1
mn10300_local_icache_inv_end:
ret [],0
......@@ -87,11 +85,8 @@ mn10300_local_dcache_inv:
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_inv_end
# invalidate
or CHCTR_DCINV,d0
movhu d0,(a0)
movhu (a0),d0
invalidate_dcache 1
mn10300_local_dcache_inv_end:
ret [],0
.size mn10300_local_dcache_inv,.-mn10300_local_dcache_inv
......
......@@ -15,6 +15,7 @@
#include <asm/cache.h>
#include <asm/irqflags.h>
#include <asm/cacheflush.h>
#include "cache.inc"
#define mn10300_local_dcache_inv_range_intr_interval \
+((1 << MN10300_DCACHE_INV_RANGE_INTR_LOG2_INTERVAL) - 1)
......@@ -70,43 +71,7 @@ mn10300_local_icache_inv:
btst CHCTR_ICEN,d0
beq mn10300_local_icache_inv_end
#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
LOCAL_CLI_SAVE(d1)
# disable the icache
and ~CHCTR_ICEN,d0
movhu d0,(a0)
# and wait for it to calm down
setlb
movhu (a0),d0
btst CHCTR_ICBUSY,d0
lne
# invalidate
or CHCTR_ICINV,d0
movhu d0,(a0)
# wait for the cache to finish
mov CHCTR,a0
setlb
movhu (a0),d0
btst CHCTR_ICBUSY,d0
lne
# and reenable it
and ~CHCTR_ICINV,d0
or CHCTR_ICEN,d0
movhu d0,(a0)
movhu (a0),d0
LOCAL_IRQ_RESTORE(d1)
#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
# invalidate
or CHCTR_ICINV,d0
movhu d0,(a0)
movhu (a0),d0
#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
invalidate_icache 1
mn10300_local_icache_inv_end:
ret [],0
......@@ -128,43 +93,7 @@ mn10300_local_dcache_inv:
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_inv_end
#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
LOCAL_CLI_SAVE(d1)
# disable the dcache
and ~CHCTR_DCEN,d0
movhu d0,(a0)
# and wait for it to calm down
setlb
movhu (a0),d0
btst CHCTR_DCBUSY,d0
lne
# invalidate
or CHCTR_DCINV,d0
movhu d0,(a0)
# wait for the cache to finish
mov CHCTR,a0
setlb
movhu (a0),d0
btst CHCTR_DCBUSY,d0
lne
# and reenable it
and ~CHCTR_DCINV,d0
or CHCTR_DCEN,d0
movhu d0,(a0)
movhu (a0),d0
LOCAL_IRQ_RESTORE(d1)
#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
# invalidate
or CHCTR_DCINV,d0
movhu d0,(a0)
movhu (a0),d0
#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
invalidate_dcache 1
mn10300_local_dcache_inv_end:
ret [],0
......
/* MN10300 CPU core caching macros -*- asm -*-
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
###############################################################################
#
# Invalidate the instruction cache.
# A0: Should hold CHCTR
# D0: Should have been read from CHCTR
# D1: Will be clobbered
#
# On some cores it is necessary to disable the icache whilst we do this.
#
###############################################################################
.macro invalidate_icache,disable_irq
#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
.if \disable_irq
# don't want an interrupt routine seeing a disabled cache
mov epsw,d1
and ~EPSW_IE,epsw
or EPSW_NMID,epsw
nop
nop
.endif
# disable the icache
and ~CHCTR_ICEN,d0
movhu d0,(a0)
# and wait for it to calm down
setlb
movhu (a0),d0
btst CHCTR_ICBUSY,d0
lne
# invalidate
or CHCTR_ICINV,d0
movhu d0,(a0)
# wait for the cache to finish
setlb
movhu (a0),d0
btst CHCTR_ICBUSY,d0
lne
# and reenable it
or CHCTR_ICEN,d0
movhu d0,(a0)
movhu (a0),d0
.if \disable_irq
LOCAL_IRQ_RESTORE(d1)
.endif
#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
# invalidate
or CHCTR_ICINV,d0
movhu d0,(a0)
movhu (a0),d0
#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
.endm
###############################################################################
#
# Invalidate the data cache.
# A0: Should hold CHCTR
# D0: Should have been read from CHCTR
# D1: Will be clobbered
#
# On some cores it is necessary to disable the dcache whilst we do this.
#
###############################################################################
.macro invalidate_dcache,disable_irq
#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
.if \disable_irq
# don't want an interrupt routine seeing a disabled cache
mov epsw,d1
and ~EPSW_IE,epsw
or EPSW_NMID,epsw
nop
nop
.endif
# disable the dcache
and ~CHCTR_DCEN,d0
movhu d0,(a0)
# and wait for it to calm down
setlb
movhu (a0),d0
btst CHCTR_DCBUSY,d0
lne
# invalidate
or CHCTR_DCINV,d0
movhu d0,(a0)
# wait for the cache to finish
setlb
movhu (a0),d0
btst CHCTR_DCBUSY,d0
lne
# and reenable it
or CHCTR_DCEN,d0
movhu d0,(a0)
movhu (a0),d0
.if \disable_irq
LOCAL_IRQ_RESTORE(d1)
.endif
#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
# invalidate
or CHCTR_DCINV,d0
movhu d0,(a0)
movhu (a0),d0
#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
.endm
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册