HID: sony: Add touchpad support for NSG-MR5U and NSG-MR7U remotes

Sony's NSG-MR5U and NSG-MR7U remote controls have a full keyboard and a
touchpad.  The keyboard is already supported by the existing Linux
kernel and drivers but the touchpad is not recognized.  This patch adds
the coded needed to bring full functionality to the touchpad.

Note that these remotes use the vendor code for SMK even though they are
Sony branded.

Known limitations
- The built-in accelerometers are not supported by these changes
- When the Drag (Fn) key is used as a mouse button, the button is
automatically released when the key begins repeating.  There are two
  workarounds for this 1) Use the button behind the touchpad instead of
  the Drag (Fn) key or 2) Disable the key repeat functionality or
  increase the key repeat delay.
Signed-off-by: NTodd Kelner <tsopdump@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

drivers/hid/hid-ids.h

@@ -958,6 +958,9 @@
 
 #define USB_VENDOR_ID_SMK		0x0609
 #define USB_DEVICE_ID_SMK_PS3_BDREMOTE	0x0306
+#define USB_DEVICE_ID_SMK_NSG_MR5U_REMOTE       0x0368
+#define USB_DEVICE_ID_SMK_NSG_MR7U_REMOTE       0x0369
+
 
 #define USB_VENDOR_ID_SONY			0x054c
 #define USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE	0x024b

drivers/hid/hid-quirks.c

@@ -608,6 +608,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
 #if IS_ENABLED(CONFIG_HID_SONY)
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_PS3_BDREMOTE) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR5U_REMOTE) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR7U_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_MOTION_CONTROLLER) },

drivers/hid/hid-sony.c

@@ -9,6 +9,7 @@
  *  Copyright (c) 2006-2013 Jiri Kosina
  *  Copyright (c) 2013 Colin Leitner <colin.leitner@gmail.com>
  *  Copyright (c) 2014-2016 Frank Praznik <frank.praznik@gmail.com>
+ *  Copyright (c) 2018 Todd Kelner
  */
 
 /*
@@ -55,6 +56,8 @@
 #define NAVIGATION_CONTROLLER_BT  BIT(11)
 #define SINO_LITE_CONTROLLER      BIT(12)
 #define FUTUREMAX_DANCE_MAT       BIT(13)
+#define NSG_MR5U_REMOTE_BT        BIT(14)
+#define NSG_MR7U_REMOTE_BT        BIT(15)
 
 #define SIXAXIS_CONTROLLER (SIXAXIS_CONTROLLER_USB | SIXAXIS_CONTROLLER_BT)
 #define MOTION_CONTROLLER (MOTION_CONTROLLER_USB | MOTION_CONTROLLER_BT)
@@ -72,8 +75,11 @@
 				MOTION_CONTROLLER)
 #define SONY_BT_DEVICE (SIXAXIS_CONTROLLER_BT | DUALSHOCK4_CONTROLLER_BT |\
 			MOTION_CONTROLLER_BT | NAVIGATION_CONTROLLER_BT)
+#define NSG_MRXU_REMOTE (NSG_MR5U_REMOTE_BT | NSG_MR7U_REMOTE_BT)
 
 #define MAX_LEDS 4
+#define NSG_MRXU_MAX_X 1667
+#define NSG_MRXU_MAX_Y 1868
 
 
 /* PS/3 Motion controller */
@@ -1098,6 +1104,80 @@ static void dualshock4_parse_report(struct sony_sc *sc, u8 *rd, int size)
 	}
 }
 
+static void nsg_mrxu_parse_report(struct sony_sc *sc, u8 *rd, int size)
+{
+	int n, offset, relx, rely;
+	u8 active;
+
+	/*
+	 * The NSG-MRxU multi-touch trackpad data starts at offset 1 and
+	 *   the touch-related data starts at offset 2.
+	 * For the first byte, bit 0 is set when touchpad button is pressed.
+	 * Bit 2 is set when a touch is active and the drag (Fn) key is pressed.
+	 * This drag key is mapped to BTN_LEFT.  It is operational only when a 
+	 *   touch point is active.
+	 * Bit 4 is set when only the first touch point is active.
+	 * Bit 6 is set when only the second touch point is active.
+	 * Bits 5 and 7 are set when both touch points are active.
+	 * The next 3 bytes are two 12 bit X/Y coordinates for the first touch.
+	 * The following byte, offset 5, has the touch width and length.
+	 *   Bits 0-4=X (width), bits 5-7=Y (length).
+	 * A signed relative X coordinate is at offset 6.
+	 * The bytes at offset 7-9 are the second touch X/Y coordinates.
+	 * Offset 10 has the second touch width and length.
+	 * Offset 11 has the relative Y coordinate.
+	 */
+	offset = 1;
+
+	input_report_key(sc->touchpad, BTN_LEFT, rd[offset] & 0x0F);
+	active = (rd[offset] >> 4);
+	relx = (s8) rd[offset+5];
+	rely = ((s8) rd[offset+10]) * -1;
+
+	offset++;
+
+	for (n = 0; n < 2; n++) {
+		u16 x, y;
+		u8 contactx, contacty;
+
+		x = rd[offset] | ((rd[offset+1] & 0x0F) << 8);
+		y = ((rd[offset+1] & 0xF0) >> 4) | (rd[offset+2] << 4);
+
+		input_mt_slot(sc->touchpad, n);
+		input_mt_report_slot_state(sc->touchpad, MT_TOOL_FINGER, active & 0x03);
+
+		if (active & 0x03) {
+			contactx = rd[offset+3] & 0x0F;
+			contacty = rd[offset+3] >> 4;
+			input_report_abs(sc->touchpad, ABS_MT_TOUCH_MAJOR,
+				max(contactx, contacty));
+			input_report_abs(sc->touchpad, ABS_MT_TOUCH_MINOR,
+				min(contactx, contacty));
+			input_report_abs(sc->touchpad, ABS_MT_ORIENTATION,
+				(bool) (contactx > contacty));
+			input_report_abs(sc->touchpad, ABS_MT_POSITION_X, x);
+			input_report_abs(sc->touchpad, ABS_MT_POSITION_Y,
+				NSG_MRXU_MAX_Y - y);
+			/*
+			 * The relative coordinates belong to the first touch
+			 * point, when present, or to the second touch point
+			 * when the first is not active.
+			 */
+			if ((n == 0) || ((n == 1) && (active & 0x01))) {
+				input_report_rel(sc->touchpad, REL_X, relx);
+				input_report_rel(sc->touchpad, REL_Y, rely);
+			}
+		}
+
+		offset += 5;
+		active >>= 2;
+	}
+
+	input_mt_sync_frame(sc->touchpad);
+
+	input_sync(sc->touchpad);
+}
+
 static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
 		u8 *rd, int size)
 {
@@ -1206,6 +1286,10 @@ static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
 		}
 
 		dualshock4_parse_report(sc, rd, size);
+
+	} else if ((sc->quirks & NSG_MRXU_REMOTE) && rd[0] == 0x02) {
+		nsg_mrxu_parse_report(sc, rd, size);
+		return 1;
 	}
 
 	if (sc->defer_initialization) {
@@ -1263,7 +1347,7 @@ static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
 }
 
 static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
-					int w, int h)
+		int w, int h, int touch_major, int touch_minor, int orientation)
 {
 	size_t name_sz;
 	char *name;
@@ -1294,10 +1378,6 @@ static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
 	snprintf(name, name_sz, "%s" DS4_TOUCHPAD_SUFFIX, sc->hdev->name);
 	sc->touchpad->name = name;
 
-	ret = input_mt_init_slots(sc->touchpad, touch_count, INPUT_MT_POINTER);
-	if (ret < 0)
-		goto err;
-
 	/* We map the button underneath the touchpad to BTN_LEFT. */
 	__set_bit(EV_KEY, sc->touchpad->evbit);
 	__set_bit(BTN_LEFT, sc->touchpad->keybit);
@@ -1306,6 +1386,25 @@ static int sony_register_touchpad(struct sony_sc *sc, int touch_count,
 	input_set_abs_params(sc->touchpad, ABS_MT_POSITION_X, 0, w, 0, 0);
 	input_set_abs_params(sc->touchpad, ABS_MT_POSITION_Y, 0, h, 0, 0);
 
+	if (touch_major > 0) {
+		input_set_abs_params(sc->touchpad, ABS_MT_TOUCH_MAJOR, 
+			0, touch_major, 0, 0);
+		if (touch_minor > 0)
+			input_set_abs_params(sc->touchpad, ABS_MT_TOUCH_MINOR, 
+				0, touch_minor, 0, 0);
+		if (orientation > 0)
+			input_set_abs_params(sc->touchpad, ABS_MT_ORIENTATION, 
+				0, orientation, 0, 0);
+	}
+
+	if (sc->quirks & NSG_MRXU_REMOTE) {
+		__set_bit(EV_REL, sc->touchpad->evbit);
+	}
+
+	ret = input_mt_init_slots(sc->touchpad, touch_count, INPUT_MT_POINTER);
+	if (ret < 0)
+		goto err;
+
 	ret = input_register_device(sc->touchpad);
 	if (ret < 0)
 		goto err;
@@ -2690,7 +2789,7 @@ static int sony_input_configured(struct hid_device *hdev,
 		 * The Dualshock 4 touchpad supports 2 touches and has a
 		 * resolution of 1920x942 (44.86 dots/mm).
 		 */
-		ret = sony_register_touchpad(sc, 2, 1920, 942);
+		ret = sony_register_touchpad(sc, 2, 1920, 942, 0, 0, 0);
 		if (ret) {
 			hid_err(sc->hdev,
 			"Unable to initialize multi-touch slots: %d\n",
@@ -2721,6 +2820,20 @@ static int sony_input_configured(struct hid_device *hdev,
 		}
 
 		sony_init_output_report(sc, dualshock4_send_output_report);
+	} else if (sc->quirks & NSG_MRXU_REMOTE) {
+		/*
+		 * The NSG-MRxU touchpad supports 2 touches and has a
+		 * resolution of 1667x1868
+		 */
+		ret = sony_register_touchpad(sc, 2,
+			NSG_MRXU_MAX_X, NSG_MRXU_MAX_Y, 15, 15, 1);
+		if (ret) {
+			hid_err(sc->hdev,
+			"Unable to initialize multi-touch slots: %d\n",
+			ret);
+			goto err_stop;
+		}
+
 	} else if (sc->quirks & MOTION_CONTROLLER) {
 		sony_init_output_report(sc, motion_send_output_report);
 	} else {
@@ -2969,6 +3082,12 @@ static const struct hid_device_id sony_devices[] = {
 	/* Nyko Core Controller for PS3 */
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SINO_LITE, USB_DEVICE_ID_SINO_LITE_CONTROLLER),
 		.driver_data = SIXAXIS_CONTROLLER_USB | SINO_LITE_CONTROLLER },
+	/* SMK-Link NSG-MR5U Remote Control */
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR5U_REMOTE),
+		.driver_data = NSG_MR5U_REMOTE_BT },
+	/* SMK-Link NSG-MR7U Remote Control */
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SMK, USB_DEVICE_ID_SMK_NSG_MR7U_REMOTE),
+		.driver_data = NSG_MR7U_REMOTE_BT },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, sony_devices);