Merge branch 'drm-gma500-alanc' into drm-core-next

* drm-gma500-alanc:
  gma500: Now connect up to the DRM build to finish the job
  gma500: fixup build versus latest header changes.
  gma500: Add support for Cedarview
  gma500: Add Oaktrail support
  gma500: Add Poulsbo support
  gma500: Add the core DRM files and headers
  gma500: Add the i2c bus support
  gma500: Add the glue to the various BIOS and firmware interfaces
  gma500: Add device framework
  gma500: introduce the framebuffer support code
  gma500: introduce the GTT and MMU handling logic
  gma500: GEM and GEM glue
  gma500: Move the basic driver out of staging

drivers/gpu/drm/Kconfig

@@ -162,3 +162,6 @@ config DRM_SAVAGE
 source "drivers/gpu/drm/exynos/Kconfig"
 
 source "drivers/gpu/drm/vmwgfx/Kconfig"
+
+source "drivers/gpu/drm/gma500/Kconfig"
+

drivers/gpu/drm/Makefile

@@ -36,4 +36,5 @@ obj-$(CONFIG_DRM_VMWGFX)+= vmwgfx/
 obj-$(CONFIG_DRM_VIA)	+=via/
 obj-$(CONFIG_DRM_NOUVEAU) +=nouveau/
 obj-$(CONFIG_DRM_EXYNOS) +=exynos/
+obj-$(CONFIG_DRM_GMA500) += gma500/
 obj-y			+= i2c/

drivers/gpu/drm/gma500/Kconfig

+config DRM_GMA500
+	tristate "Intel GMA5/600 KMS Framebuffer"
+	depends on DRM && PCI && X86 && EXPERIMENTAL
+	select FB_CFB_COPYAREA
+        select FB_CFB_FILLRECT
+        select FB_CFB_IMAGEBLIT
+        select DRM_KMS_HELPER
+        select DRM_TTM
+	help
+	  Say yes for an experimental 2D KMS framebuffer driver for the
+	  Intel GMA500 ('Poulsbo') and other Intel IMG based graphics
+	  devices.
+
+config DRM_GMA600
+	bool "Intel GMA600 support (Experimental)"
+	depends on DRM_GMA500
+	help
+	  Say yes to include support for GMA600 (Intel Moorestown/Oaktrail)
+	  platforms with LVDS ports. HDMI and MIPI are not currently
+	  supported.
+
+config DRM_CEDARVIEW
+	bool "Intel Cedarview support (Experimental)"
+	depends on DRM_GMA500
+	help
+	  Say yes to include support for Intel Cedarview platforms

drivers/gpu/drm/gma500/Makefile

+#
+#	KMS driver for the GMA500
+#
+ccflags-y += -Iinclude/drm
+
+gma500_gfx-y += gem_glue.o \
+	  accel_2d.o \
+	  backlight.o \
+	  framebuffer.o \
+	  gem.o \
+	  gtt.o \
+	  intel_bios.o \
+	  intel_i2c.o \
+	  intel_opregion.o \
+	  mmu.o \
+	  power.o \
+	  psb_drv.o \
+	  psb_intel_display.o \
+	  psb_intel_lvds.o \
+	  psb_intel_modes.o \
+	  psb_intel_sdvo.o \
+	  psb_lid.o \
+	  psb_irq.o \
+	  psb_device.o \
+	  mid_bios.o
+
+gma500_gfx-$(CONFIG_DRM_CEDARVIEW) +=  cdv_device.o \
+	  cdv_intel_crt.o \
+	  cdv_intel_display.o \
+	  cdv_intel_hdmi.o \
+	  cdv_intel_lvds.o
+
+gma500_gfx-$(CONFIG_DRM_GMA600) += oaktrail_device.o \
+	  oaktrail_crtc.o \
+	  oaktrail_lvds.o \
+	  oaktrail_hdmi.o \
+	  oaktrail_hdmi_i2c.o
+
+obj-$(CONFIG_DRM_GMA500) += gma500_gfx.o

drivers/gpu/drm/gma500/accel_2d.c

+/**************************************************************************
+ * Copyright (c) 2007-2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Intel funded Tungsten Graphics (http://www.tungstengraphics.com) to
+ * develop this driver.
+ *
+ **************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/console.h>
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include <drm/drm_crtc.h>
+
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "framebuffer.h"
+
+/**
+ *	psb_spank		-	reset the 2D engine
+ *	@dev_priv: our PSB DRM device
+ *
+ *	Soft reset the graphics engine and then reload the necessary registers.
+ *	We use this at initialisation time but it will become relevant for
+ *	accelerated X later
+ */
+void psb_spank(struct drm_psb_private *dev_priv)
+{
+	PSB_WSGX32(_PSB_CS_RESET_BIF_RESET | _PSB_CS_RESET_DPM_RESET |
+		_PSB_CS_RESET_TA_RESET | _PSB_CS_RESET_USE_RESET |
+		_PSB_CS_RESET_ISP_RESET | _PSB_CS_RESET_TSP_RESET |
+		_PSB_CS_RESET_TWOD_RESET, PSB_CR_SOFT_RESET);
+	PSB_RSGX32(PSB_CR_SOFT_RESET);
+
+	msleep(1);
+
+	PSB_WSGX32(0, PSB_CR_SOFT_RESET);
+	wmb();
+	PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) | _PSB_CB_CTRL_CLEAR_FAULT,
+		   PSB_CR_BIF_CTRL);
+	wmb();
+	(void) PSB_RSGX32(PSB_CR_BIF_CTRL);
+
+	msleep(1);
+	PSB_WSGX32(PSB_RSGX32(PSB_CR_BIF_CTRL) & ~_PSB_CB_CTRL_CLEAR_FAULT,
+		   PSB_CR_BIF_CTRL);
+	(void) PSB_RSGX32(PSB_CR_BIF_CTRL);
+	PSB_WSGX32(dev_priv->gtt.gatt_start, PSB_CR_BIF_TWOD_REQ_BASE);
+}
+
+/**
+ *	psb2_2d_wait_available	-	wait for FIFO room
+ *	@dev_priv: our DRM device
+ *	@size: size (in dwords) of the command we want to issue
+ *
+ *	Wait until there is room to load the FIFO with our data. If the
+ *	device is not responding then reset it
+ */
+static int psb_2d_wait_available(struct drm_psb_private *dev_priv,
+			  unsigned size)
+{
+	uint32_t avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
+	unsigned long t = jiffies + HZ;
+
+	while (avail < size) {
+		avail = PSB_RSGX32(PSB_CR_2D_SOCIF);
+		if (time_after(jiffies, t)) {
+			psb_spank(dev_priv);
+			return -EIO;
+		}
+	}
+	return 0;
+}
+
+/**
+ *	psb_2d_submit		-	submit a 2D command
+ *	@dev_priv: our DRM device
+ *	@cmdbuf: command to issue
+ *	@size: length (in dwords)
+ *
+ *	Issue one or more 2D commands to the accelerator. This needs to be
+ *	serialized later when we add the GEM interfaces for acceleration
+ */
+static int psbfb_2d_submit(struct drm_psb_private *dev_priv, uint32_t *cmdbuf,
+								unsigned size)
+{
+	int ret = 0;
+	int i;
+	unsigned submit_size;
+
+	mutex_lock(&dev_priv->mutex_2d);
+	while (size > 0) {
+		submit_size = (size < 0x60) ? size : 0x60;
+		size -= submit_size;
+		ret = psb_2d_wait_available(dev_priv, submit_size);
+		if (ret)
+		        break;
+
+		submit_size <<= 2;
+
+		for (i = 0; i < submit_size; i += 4)
+			PSB_WSGX32(*cmdbuf++, PSB_SGX_2D_SLAVE_PORT + i);
+
+		(void)PSB_RSGX32(PSB_SGX_2D_SLAVE_PORT + i - 4);
+	}
+	mutex_unlock(&dev_priv->mutex_2d);
+	return ret;
+}
+
+
+/**
+ *	psb_accel_2d_copy_direction	-	compute blit order
+ *	@xdir: X direction of move
+ *	@ydir: Y direction of move
+ *
+ *	Compute the correct order setings to ensure that an overlapping blit
+ *	correctly copies all the pixels.
+ */
+static u32 psb_accel_2d_copy_direction(int xdir, int ydir)
+{
+	if (xdir < 0)
+		return (ydir < 0) ? PSB_2D_COPYORDER_BR2TL :
+						PSB_2D_COPYORDER_TR2BL;
+	else
+		return (ydir < 0) ? PSB_2D_COPYORDER_BL2TR :
+						PSB_2D_COPYORDER_TL2BR;
+}
+
+/**
+ *	psb_accel_2d_copy		-	accelerated 2D copy
+ *	@dev_priv: our DRM device
+ *	@src_offset in bytes
+ *	@src_stride in bytes
+ *	@src_format psb 2D format defines
+ *	@dst_offset in bytes
+ *	@dst_stride in bytes
+ *	@dst_format psb 2D format defines
+ *	@src_x offset in pixels
+ *	@src_y offset in pixels
+ *	@dst_x offset in pixels
+ *	@dst_y offset in pixels
+ *	@size_x of the copied area
+ *	@size_y of the copied area
+ *
+ *	Format and issue a 2D accelerated copy command.
+ */
+static int psb_accel_2d_copy(struct drm_psb_private *dev_priv,
+			     uint32_t src_offset, uint32_t src_stride,
+			     uint32_t src_format, uint32_t dst_offset,
+			     uint32_t dst_stride, uint32_t dst_format,
+			     uint16_t src_x, uint16_t src_y,
+			     uint16_t dst_x, uint16_t dst_y,
+			     uint16_t size_x, uint16_t size_y)
+{
+	uint32_t blit_cmd;
+	uint32_t buffer[10];
+	uint32_t *buf;
+	uint32_t direction;
+
+	buf = buffer;
+
+	direction =
+	    psb_accel_2d_copy_direction(src_x - dst_x, src_y - dst_y);
+
+	if (direction == PSB_2D_COPYORDER_BR2TL ||
+	    direction == PSB_2D_COPYORDER_TR2BL) {
+		src_x += size_x - 1;
+		dst_x += size_x - 1;
+	}
+	if (direction == PSB_2D_COPYORDER_BR2TL ||
+	    direction == PSB_2D_COPYORDER_BL2TR) {
+		src_y += size_y - 1;
+		dst_y += size_y - 1;
+	}
+
+	blit_cmd =
+	    PSB_2D_BLIT_BH |
+	    PSB_2D_ROT_NONE |
+	    PSB_2D_DSTCK_DISABLE |
+	    PSB_2D_SRCCK_DISABLE |
+	    PSB_2D_USE_PAT | PSB_2D_ROP3_SRCCOPY | direction;
+
+	*buf++ = PSB_2D_FENCE_BH;
+	*buf++ =
+	    PSB_2D_DST_SURF_BH | dst_format | (dst_stride <<
+					       PSB_2D_DST_STRIDE_SHIFT);
+	*buf++ = dst_offset;
+	*buf++ =
+	    PSB_2D_SRC_SURF_BH | src_format | (src_stride <<
+					       PSB_2D_SRC_STRIDE_SHIFT);
+	*buf++ = src_offset;
+	*buf++ =
+	    PSB_2D_SRC_OFF_BH | (src_x << PSB_2D_SRCOFF_XSTART_SHIFT) |
+	    (src_y << PSB_2D_SRCOFF_YSTART_SHIFT);
+	*buf++ = blit_cmd;
+	*buf++ =
+	    (dst_x << PSB_2D_DST_XSTART_SHIFT) | (dst_y <<
+						  PSB_2D_DST_YSTART_SHIFT);
+	*buf++ =
+	    (size_x << PSB_2D_DST_XSIZE_SHIFT) | (size_y <<
+						  PSB_2D_DST_YSIZE_SHIFT);
+	*buf++ = PSB_2D_FLUSH_BH;
+
+	return psbfb_2d_submit(dev_priv, buffer, buf - buffer);
+}
+
+/**
+ *	psbfb_copyarea_accel	-	copyarea acceleration for /dev/fb
+ *	@info: our framebuffer
+ *	@a: copyarea parameters from the framebuffer core
+ *
+ *	Perform a 2D copy via the accelerator
+ */
+static void psbfb_copyarea_accel(struct fb_info *info,
+				 const struct fb_copyarea *a)
+{
+	struct psb_fbdev *fbdev = info->par;
+	struct psb_framebuffer *psbfb = &fbdev->pfb;
+	struct drm_device *dev = psbfb->base.dev;
+	struct drm_framebuffer *fb = fbdev->psb_fb_helper.fb;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	uint32_t offset;
+	uint32_t stride;
+	uint32_t src_format;
+	uint32_t dst_format;
+
+	if (!fb)
+		return;
+
+	offset = psbfb->gtt->offset;
+	stride = fb->pitch;
+
+	switch (fb->depth) {
+	case 8:
+		src_format = PSB_2D_SRC_332RGB;
+		dst_format = PSB_2D_DST_332RGB;
+		break;
+	case 15:
+		src_format = PSB_2D_SRC_555RGB;
+		dst_format = PSB_2D_DST_555RGB;
+		break;
+	case 16:
+		src_format = PSB_2D_SRC_565RGB;
+		dst_format = PSB_2D_DST_565RGB;
+		break;
+	case 24:
+	case 32:
+		/* this is wrong but since we don't do blending its okay */
+		src_format = PSB_2D_SRC_8888ARGB;
+		dst_format = PSB_2D_DST_8888ARGB;
+		break;
+	default:
+		/* software fallback */
+		cfb_copyarea(info, a);
+		return;
+	}
+
+	if (!gma_power_begin(dev, false)) {
+		cfb_copyarea(info, a);
+		return;
+	}
+	psb_accel_2d_copy(dev_priv,
+			  offset, stride, src_format,
+			  offset, stride, dst_format,
+			  a->sx, a->sy, a->dx, a->dy, a->width, a->height);
+	gma_power_end(dev);
+}
+
+/**
+ *	psbfb_copyarea	-	2D copy interface
+ *	@info: our framebuffer
+ *	@region: region to copy
+ *
+ *	Copy an area of the framebuffer console either by the accelerator
+ *	or directly using the cfb helpers according to the request
+ */
+void psbfb_copyarea(struct fb_info *info,
+			   const struct fb_copyarea *region)
+{
+	if (unlikely(info->state != FBINFO_STATE_RUNNING))
+		return;
+
+	/* Avoid the 8 pixel erratum */
+	if (region->width == 8 || region->height == 8 ||
+		(info->flags & FBINFO_HWACCEL_DISABLED))
+		return cfb_copyarea(info, region);
+
+	psbfb_copyarea_accel(info, region);
+}
+
+/**
+ *	psbfb_sync	-	synchronize 2D
+ *	@info: our framebuffer
+ *
+ *	Wait for the 2D engine to quiesce so that we can do CPU
+ *	access to the framebuffer again
+ */
+int psbfb_sync(struct fb_info *info)
+{
+	struct psb_fbdev *fbdev = info->par;
+	struct psb_framebuffer *psbfb = &fbdev->pfb;
+	struct drm_device *dev = psbfb->base.dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long _end = jiffies + DRM_HZ;
+	int busy = 0;
+
+	mutex_lock(&dev_priv->mutex_2d);
+	/*
+	 * First idle the 2D engine.
+	 */
+
+	if ((PSB_RSGX32(PSB_CR_2D_SOCIF) == _PSB_C2_SOCIF_EMPTY) &&
+	    ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) & _PSB_C2B_STATUS_BUSY) == 0))
+		goto out;
+
+	do {
+		busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY);
+		cpu_relax();
+	} while (busy && !time_after_eq(jiffies, _end));
+
+	if (busy)
+		busy = (PSB_RSGX32(PSB_CR_2D_SOCIF) != _PSB_C2_SOCIF_EMPTY);
+	if (busy)
+		goto out;
+
+	do {
+		busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) &
+						_PSB_C2B_STATUS_BUSY) != 0);
+		cpu_relax();
+	} while (busy && !time_after_eq(jiffies, _end));
+	if (busy)
+		busy = ((PSB_RSGX32(PSB_CR_2D_BLIT_STATUS) &
+					_PSB_C2B_STATUS_BUSY) != 0);
+
+out:
+	mutex_unlock(&dev_priv->mutex_2d);
+	return (busy) ? -EBUSY : 0;
+}

drivers/gpu/drm/gma500/backlight.c

+/*
+ * GMA500 Backlight Interface
+ *
+ * Copyright (c) 2009-2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors: Eric Knopp
+ *
+ */
+
+#include "psb_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_intel_drv.h"
+#include "intel_bios.h"
+#include "power.h"
+
+int gma_backlight_init(struct drm_device *dev)
+{
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	return dev_priv->ops->backlight_init(dev);
+#else
+	return 0;
+#endif
+}
+
+void gma_backlight_exit(struct drm_device *dev)
+{
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	if (dev_priv->backlight_device) {
+		dev_priv->backlight_device->props.brightness = 0;
+		backlight_update_status(dev_priv->backlight_device);
+		backlight_device_unregister(dev_priv->backlight_device);
+	}
+#endif
+}

drivers/gpu/drm/gma500/cdv_device.c

+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#include <linux/backlight.h>
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+#include "psb_reg.h"
+#include "psb_intel_reg.h"
+#include "intel_bios.h"
+#include "cdv_device.h"
+
+#define VGA_SR_INDEX		0x3c4
+#define VGA_SR_DATA		0x3c5
+
+/* FIXME: should check if we are the active VGA device ?? */
+static void cdv_disable_vga(struct drm_device *dev)
+{
+	u8 sr1;
+	u32 vga_reg;
+
+	vga_reg = VGACNTRL;
+
+	outb(1, VGA_SR_INDEX);
+	sr1 = inb(VGA_SR_DATA);
+	outb(sr1 | 1<<5, VGA_SR_DATA);
+	udelay(300);
+
+	REG_WRITE(vga_reg, VGA_DISP_DISABLE);
+	REG_READ(vga_reg);
+}
+
+static int cdv_output_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	cdv_disable_vga(dev);
+
+	cdv_intel_crt_init(dev, &dev_priv->mode_dev);
+	cdv_intel_lvds_init(dev, &dev_priv->mode_dev);
+
+	/* These bits indicate HDMI not SDVO on CDV, but we don't yet support
+	   the HDMI interface */
+	if (REG_READ(SDVOB) & SDVO_DETECTED)
+		cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB);
+	if (REG_READ(SDVOC) & SDVO_DETECTED)
+		cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC);
+	return 0;
+}
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+
+/*
+ *	Poulsbo Backlight Interfaces
+ */
+
+#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+
+#define PSB_BLC_PWM_PRECISION_FACTOR    10
+#define PSB_BLC_MAX_PWM_REG_FREQ        0xFFFE
+#define PSB_BLC_MIN_PWM_REG_FREQ        0x2
+
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
+
+static int cdv_brightness;
+static struct backlight_device *cdv_backlight_device;
+
+static int cdv_get_brightness(struct backlight_device *bd)
+{
+	/* return locally cached var instead of HW read (due to DPST etc.) */
+	/* FIXME: ideally return actual value in case firmware fiddled with
+	   it */
+	return cdv_brightness;
+}
+
+
+static int cdv_backlight_setup(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	unsigned long core_clock;
+	/* u32 bl_max_freq; */
+	/* unsigned long value; */
+	u16 bl_max_freq;
+	uint32_t value;
+	uint32_t blc_pwm_precision_factor;
+
+	/* get bl_max_freq and pol from dev_priv*/
+	if (!dev_priv->lvds_bl) {
+		dev_err(dev->dev, "Has no valid LVDS backlight info\n");
+		return -ENOENT;
+	}
+	bl_max_freq = dev_priv->lvds_bl->freq;
+	blc_pwm_precision_factor = PSB_BLC_PWM_PRECISION_FACTOR;
+
+	core_clock = dev_priv->core_freq;
+
+	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+	value *= blc_pwm_precision_factor;
+	value /= bl_max_freq;
+	value /= blc_pwm_precision_factor;
+
+	if (value > (unsigned long long)PSB_BLC_MAX_PWM_REG_FREQ ||
+		 value < (unsigned long long)PSB_BLC_MIN_PWM_REG_FREQ)
+				return -ERANGE;
+	else {
+		/* FIXME */
+	}
+	return 0;
+}
+
+static int cdv_set_brightness(struct backlight_device *bd)
+{
+	int level = bd->props.brightness;
+
+	/* Percentage 1-100% being valid */
+	if (level < 1)
+		level = 1;
+
+	/*cdv_intel_lvds_set_brightness(dev, level); FIXME */
+	cdv_brightness = level;
+	return 0;
+}
+
+static const struct backlight_ops cdv_ops = {
+	.get_brightness = cdv_get_brightness,
+	.update_status  = cdv_set_brightness,
+};
+
+static int cdv_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int ret;
+	struct backlight_properties props;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 100;
+	props.type = BACKLIGHT_PLATFORM;
+
+	cdv_backlight_device = backlight_device_register("psb-bl",
+					NULL, (void *)dev, &cdv_ops, &props);
+	if (IS_ERR(cdv_backlight_device))
+		return PTR_ERR(cdv_backlight_device);
+
+	ret = cdv_backlight_setup(dev);
+	if (ret < 0) {
+		backlight_device_unregister(cdv_backlight_device);
+		cdv_backlight_device = NULL;
+		return ret;
+	}
+	cdv_backlight_device->props.brightness = 100;
+	cdv_backlight_device->props.max_brightness = 100;
+	backlight_update_status(cdv_backlight_device);
+	dev_priv->backlight_device = cdv_backlight_device;
+	return 0;
+}
+
+#endif
+
+/*
+ *	Provide the Cedarview specific chip logic and low level methods
+ *	for power management
+ *
+ *	FIXME: we need to implement the apm/ospm base management bits
+ *	for this and the MID devices.
+ */
+
+static inline u32 CDV_MSG_READ32(uint port, uint offset)
+{
+	int mcr = (0x10<<24) | (port << 16) | (offset << 8);
+	uint32_t ret_val = 0;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	pci_write_config_dword(pci_root, 0xD0, mcr);
+	pci_read_config_dword(pci_root, 0xD4, &ret_val);
+	pci_dev_put(pci_root);
+	return ret_val;
+}
+
+static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value)
+{
+	int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	pci_write_config_dword(pci_root, 0xD4, value);
+	pci_write_config_dword(pci_root, 0xD0, mcr);
+	pci_dev_put(pci_root);
+}
+
+#define PSB_APM_CMD			0x0
+#define PSB_APM_STS			0x04
+#define PSB_PM_SSC			0x20
+#define PSB_PM_SSS			0x30
+#define PSB_PWRGT_GFX_MASK		0x3
+#define CDV_PWRGT_DISPLAY_CNTR		0x000fc00c
+#define CDV_PWRGT_DISPLAY_STS		0x000fc00c
+
+static void cdv_init_pm(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pwr_cnt;
+	int i;
+
+	dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+							PSB_APMBA) & 0xFFFF;
+	dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT,
+							PSB_OSPMBA) & 0xFFFF;
+
+	/* Force power on for now */
+	pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD);
+	pwr_cnt &= ~PSB_PWRGT_GFX_MASK;
+
+	outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD);
+	for (i = 0; i < 5; i++) {
+		u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS);
+		if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0)
+			break;
+		udelay(10);
+	}
+	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
+	pwr_cnt &= ~CDV_PWRGT_DISPLAY_CNTR;
+	outl(pwr_cnt, dev_priv->ospm_base + PSB_PM_SSC);
+	for (i = 0; i < 5; i++) {
+		u32 pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+		if ((pwr_sts & CDV_PWRGT_DISPLAY_STS) == 0)
+			break;
+		udelay(10);
+	}
+}
+
+/**
+ *	cdv_save_display_registers	-	save registers lost on suspend
+ *	@dev: our DRM device
+ *
+ *	Save the state we need in order to be able to restore the interface
+ *	upon resume from suspend
+ *
+ *	FIXME: review
+ */
+static int cdv_save_display_registers(struct drm_device *dev)
+{
+	return 0;
+}
+
+/**
+ *	cdv_restore_display_registers	-	restore lost register state
+ *	@dev: our DRM device
+ *
+ *	Restore register state that was lost during suspend and resume.
+ *
+ *	FIXME: review
+ */
+static int cdv_restore_display_registers(struct drm_device *dev)
+{
+	return 0;
+}
+
+static int cdv_power_down(struct drm_device *dev)
+{
+	return 0;
+}
+
+static int cdv_power_up(struct drm_device *dev)
+{
+	return 0;
+}
+
+/* FIXME ? - shared with Poulsbo */
+static void cdv_get_core_freq(struct drm_device *dev)
+{
+	uint32_t clock;
+	struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0);
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	pci_write_config_dword(pci_root, 0xD0, 0xD0050300);
+	pci_read_config_dword(pci_root, 0xD4, &clock);
+	pci_dev_put(pci_root);
+
+	switch (clock & 0x07) {
+	case 0:
+		dev_priv->core_freq = 100;
+		break;
+	case 1:
+		dev_priv->core_freq = 133;
+		break;
+	case 2:
+		dev_priv->core_freq = 150;
+		break;
+	case 3:
+		dev_priv->core_freq = 178;
+		break;
+	case 4:
+		dev_priv->core_freq = 200;
+		break;
+	case 5:
+	case 6:
+	case 7:
+		dev_priv->core_freq = 266;
+	default:
+		dev_priv->core_freq = 0;
+	}
+}
+
+static int cdv_chip_setup(struct drm_device *dev)
+{
+	cdv_get_core_freq(dev);
+	gma_intel_opregion_init(dev);
+	psb_intel_init_bios(dev);
+	return 0;
+}
+
+/* CDV is much like Poulsbo but has MID like SGX offsets and PM */
+
+const struct psb_ops cdv_chip_ops = {
+	.name = "Cedartrail",
+	.accel_2d = 0,
+	.pipes = 2,
+	.sgx_offset = MRST_SGX_OFFSET,
+	.chip_setup = cdv_chip_setup,
+
+	.crtc_helper = &cdv_intel_helper_funcs,
+	.crtc_funcs = &cdv_intel_crtc_funcs,
+
+	.output_init = cdv_output_init,
+
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+	.backlight_init = cdv_backlight_init,
+#endif
+
+	.init_pm = cdv_init_pm,
+	.save_regs = cdv_save_display_registers,
+	.restore_regs = cdv_restore_display_registers,
+	.power_down = cdv_power_down,
+	.power_up = cdv_power_up,
+};

drivers/gpu/drm/gma500/cdv_device.h

+/*
+ * Copyright © 2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+extern const struct drm_crtc_helper_funcs cdv_intel_helper_funcs;
+extern const struct drm_crtc_funcs cdv_intel_crtc_funcs;
+extern void cdv_intel_crt_init(struct drm_device *dev,
+			struct psb_intel_mode_device *mode_dev);
+extern void cdv_intel_lvds_init(struct drm_device *dev,
+			struct psb_intel_mode_device *mode_dev);
+extern void cdv_hdmi_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev,
+			int reg);
+extern struct drm_display_mode *cdv_intel_crtc_mode_get(struct drm_device *dev,
+					     struct drm_crtc *crtc);
+
+extern inline void cdv_intel_wait_for_vblank(struct drm_device *dev)
+{
+	/* Wait for 20ms, i.e. one cycle at 50hz. */
+        /* FIXME: msleep ?? */
+	mdelay(20);
+}
+
+

drivers/gpu/drm/gma500/cdv_intel_crt.c

+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/i2c.h>
+#include <drm/drmP.h>
+
+#include "intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+#include <linux/pm_runtime.h>
+
+
+static void cdv_intel_crt_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	u32 temp, reg;
+	reg = ADPA;
+
+	temp = REG_READ(reg);
+	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
+	temp &= ~ADPA_DAC_ENABLE;
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		temp |= ADPA_DAC_ENABLE;
+		break;
+	case DRM_MODE_DPMS_STANDBY:
+		temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_SUSPEND:
+		temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	case DRM_MODE_DPMS_OFF:
+		temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
+		break;
+	}
+
+	REG_WRITE(reg, temp);
+}
+
+static int cdv_intel_crt_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	int max_clock = 0;
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* The lowest clock for CDV is 20000KHz */
+	if (mode->clock < 20000)
+		return MODE_CLOCK_LOW;
+
+	/* The max clock for CDV is 355 instead of 400 */
+	max_clock = 355000;
+	if (mode->clock > max_clock)
+		return MODE_CLOCK_HIGH;
+
+	if (mode->hdisplay > 1680 || mode->vdisplay > 1050)
+		return MODE_PANEL;
+
+	return MODE_OK;
+}
+
+static bool cdv_intel_crt_mode_fixup(struct drm_encoder *encoder,
+				 struct drm_display_mode *mode,
+				 struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void cdv_intel_crt_mode_set(struct drm_encoder *encoder,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode)
+{
+
+	struct drm_device *dev = encoder->dev;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct psb_intel_crtc *psb_intel_crtc =
+					to_psb_intel_crtc(crtc);
+	int dpll_md_reg;
+	u32 adpa, dpll_md;
+	u32 adpa_reg;
+
+	if (psb_intel_crtc->pipe == 0)
+		dpll_md_reg = DPLL_A_MD;
+	else
+		dpll_md_reg = DPLL_B_MD;
+
+	adpa_reg = ADPA;
+
+	/*
+	 * Disable separate mode multiplier used when cloning SDVO to CRT
+	 * XXX this needs to be adjusted when we really are cloning
+	 */
+	{
+		dpll_md = REG_READ(dpll_md_reg);
+		REG_WRITE(dpll_md_reg,
+			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
+	}
+
+	adpa = 0;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
+
+	if (psb_intel_crtc->pipe == 0)
+		adpa |= ADPA_PIPE_A_SELECT;
+	else
+		adpa |= ADPA_PIPE_B_SELECT;
+
+	REG_WRITE(adpa_reg, adpa);
+}
+
+
+/**
+ * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
+ *
+ * \return true if CRT is connected.
+ * \return false if CRT is disconnected.
+ */
+static bool cdv_intel_crt_detect_hotplug(struct drm_connector *connector,
+								bool force)
+{
+	struct drm_device *dev = connector->dev;
+	u32 hotplug_en;
+	int i, tries = 0, ret = false;
+	u32 adpa_orig;
+
+	/* disable the DAC when doing the hotplug detection */
+
+	adpa_orig = REG_READ(ADPA);
+
+	REG_WRITE(ADPA, adpa_orig & ~(ADPA_DAC_ENABLE));
+
+	/*
+	 * On a CDV thep, CRT detect sequence need to be done twice
+	 * to get a reliable result.
+	 */
+	tries = 2;
+
+	hotplug_en = REG_READ(PORT_HOTPLUG_EN);
+	hotplug_en &= ~(CRT_HOTPLUG_DETECT_MASK);
+	hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
+
+	hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
+	hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
+
+	for (i = 0; i < tries ; i++) {
+		unsigned long timeout;
+		/* turn on the FORCE_DETECT */
+		REG_WRITE(PORT_HOTPLUG_EN, hotplug_en);
+		timeout = jiffies + msecs_to_jiffies(1000);
+		/* wait for FORCE_DETECT to go off */
+		do {
+			if (!(REG_READ(PORT_HOTPLUG_EN) &
+					CRT_HOTPLUG_FORCE_DETECT))
+				break;
+			msleep(1);
+		} while (time_after(timeout, jiffies));
+	}
+
+	if ((REG_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) !=
+	    CRT_HOTPLUG_MONITOR_NONE)
+		ret = true;
+
+	/* Restore the saved ADPA */
+	REG_WRITE(ADPA, adpa_orig);
+	return ret;
+}
+
+static enum drm_connector_status cdv_intel_crt_detect(
+				struct drm_connector *connector, bool force)
+{
+	if (cdv_intel_crt_detect_hotplug(connector, force))
+		return connector_status_connected;
+	else
+		return connector_status_disconnected;
+}
+
+static void cdv_intel_crt_destroy(struct drm_connector *connector)
+{
+	struct psb_intel_output *intel_output = to_psb_intel_output(connector);
+
+	psb_intel_i2c_destroy(intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static int cdv_intel_crt_get_modes(struct drm_connector *connector)
+{
+	struct psb_intel_output *intel_output =
+				to_psb_intel_output(connector);
+	return psb_intel_ddc_get_modes(intel_output);
+}
+
+static int cdv_intel_crt_set_property(struct drm_connector *connector,
+				  struct drm_property *property,
+				  uint64_t value)
+{
+	return 0;
+}
+
+/*
+ * Routines for controlling stuff on the analog port
+ */
+
+static const struct drm_encoder_helper_funcs cdv_intel_crt_helper_funcs = {
+	.dpms = cdv_intel_crt_dpms,
+	.mode_fixup = cdv_intel_crt_mode_fixup,
+	.prepare = psb_intel_encoder_prepare,
+	.commit = psb_intel_encoder_commit,
+	.mode_set = cdv_intel_crt_mode_set,
+};
+
+static const struct drm_connector_funcs cdv_intel_crt_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.detect = cdv_intel_crt_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = cdv_intel_crt_destroy,
+	.set_property = cdv_intel_crt_set_property,
+};
+
+static const struct drm_connector_helper_funcs
+				cdv_intel_crt_connector_helper_funcs = {
+	.mode_valid = cdv_intel_crt_mode_valid,
+	.get_modes = cdv_intel_crt_get_modes,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+static void cdv_intel_crt_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+static const struct drm_encoder_funcs cdv_intel_crt_enc_funcs = {
+	.destroy = cdv_intel_crt_enc_destroy,
+};
+
+void cdv_intel_crt_init(struct drm_device *dev,
+			struct psb_intel_mode_device *mode_dev)
+{
+
+	struct psb_intel_output *psb_intel_output;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+
+	u32 i2c_reg;
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	drm_connector_init(dev, connector,
+		&cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
+
+	encoder = &psb_intel_output->enc;
+	drm_encoder_init(dev, encoder,
+		&cdv_intel_crt_enc_funcs, DRM_MODE_ENCODER_DAC);
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+
+	/* Set up the DDC bus. */
+	i2c_reg = GPIOA;
+	/* Remove the following code for CDV */
+	/*
+	if (dev_priv->crt_ddc_bus != 0)
+		i2c_reg = dev_priv->crt_ddc_bus;
+	}*/
+	psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+						i2c_reg, "CRTDDC_A");
+	if (!psb_intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
+			   "failed.\n");
+		goto failed_ddc;
+	}
+
+	psb_intel_output->type = INTEL_OUTPUT_ANALOG;
+	/*
+	psb_intel_output->clone_mask = (1 << INTEL_ANALOG_CLONE_BIT);
+	psb_intel_output->crtc_mask = (1 << 0) | (1 << 1);
+	*/
+	connector->interlace_allowed = 0;
+	connector->doublescan_allowed = 0;
+
+	drm_encoder_helper_add(encoder, &cdv_intel_crt_helper_funcs);
+	drm_connector_helper_add(connector,
+					&cdv_intel_crt_connector_helper_funcs);
+
+	drm_sysfs_connector_add(connector);
+
+	return;
+failed_ddc:
+	drm_encoder_cleanup(&psb_intel_output->enc);
+	drm_connector_cleanup(&psb_intel_output->base);
+	kfree(psb_intel_output);
+	return;
+}

drivers/gpu/drm/gma500/cdv_intel_hdmi.c

+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	jim liu <jim.liu@intel.com>
+ *
+ * FIXME:
+ *	We should probably make this generic and share it with Medfield
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+#include "psb_intel_drv.h"
+#include "psb_drv.h"
+#include "psb_intel_reg.h"
+#include <linux/pm_runtime.h>
+
+/* hdmi control bits */
+#define HDMI_NULL_PACKETS_DURING_VSYNC	(1 << 9)
+#define HDMI_BORDER_ENABLE		(1 << 7)
+#define HDMI_AUDIO_ENABLE		(1 << 6)
+#define HDMI_VSYNC_ACTIVE_HIGH		(1 << 4)
+#define HDMI_HSYNC_ACTIVE_HIGH		(1 << 3)
+/* hdmi-b control bits */
+#define	HDMIB_PIPE_B_SELECT		(1 << 30)
+
+
+struct mid_intel_hdmi_priv {
+	u32 hdmi_reg;
+	u32 save_HDMIB;
+	bool has_hdmi_sink;
+	bool has_hdmi_audio;
+	/* Should set this when detect hotplug */
+	bool hdmi_device_connected;
+	struct mdfld_hdmi_i2c *i2c_bus;
+	struct i2c_adapter *hdmi_i2c_adapter;	/* for control functions */
+	struct drm_device *dev;
+};
+
+static void cdv_hdmi_mode_set(struct drm_encoder *encoder,
+			struct drm_display_mode *mode,
+			struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+	u32 hdmib;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct psb_intel_crtc *intel_crtc = to_psb_intel_crtc(crtc);
+
+	hdmib = (2 << 10);
+
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+		hdmib |= HDMI_VSYNC_ACTIVE_HIGH;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+		hdmib |= HDMI_HSYNC_ACTIVE_HIGH;
+
+	if (intel_crtc->pipe == 1)
+		hdmib |= HDMIB_PIPE_B_SELECT;
+
+	if (hdmi_priv->has_hdmi_audio) {
+		hdmib |= HDMI_AUDIO_ENABLE;
+		hdmib |= HDMI_NULL_PACKETS_DURING_VSYNC;
+	}
+
+	REG_WRITE(hdmi_priv->hdmi_reg, hdmib);
+	REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static bool cdv_hdmi_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static void cdv_hdmi_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+	u32 hdmib;
+
+	hdmib = REG_READ(hdmi_priv->hdmi_reg);
+
+	if (mode != DRM_MODE_DPMS_ON)
+		REG_WRITE(hdmi_priv->hdmi_reg, hdmib & ~HDMIB_PORT_EN);
+	else
+		REG_WRITE(hdmi_priv->hdmi_reg, hdmib | HDMIB_PORT_EN);
+	REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static void cdv_hdmi_save(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct psb_intel_output *output = to_psb_intel_output(connector);
+	struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+
+	hdmi_priv->save_HDMIB = REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static void cdv_hdmi_restore(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct psb_intel_output *output = to_psb_intel_output(connector);
+	struct mid_intel_hdmi_priv *hdmi_priv = output->dev_priv;
+
+	REG_WRITE(hdmi_priv->hdmi_reg, hdmi_priv->save_HDMIB);
+	REG_READ(hdmi_priv->hdmi_reg);
+}
+
+static enum drm_connector_status cdv_hdmi_detect(
+				struct drm_connector *connector, bool force)
+{
+	struct psb_intel_output *psb_intel_output =
+						to_psb_intel_output(connector);
+	struct mid_intel_hdmi_priv *hdmi_priv = psb_intel_output->dev_priv;
+	struct edid *edid = NULL;
+	enum drm_connector_status status = connector_status_disconnected;
+
+	edid = drm_get_edid(&psb_intel_output->base,
+			 psb_intel_output->hdmi_i2c_adapter);
+
+	hdmi_priv->has_hdmi_sink = false;
+	hdmi_priv->has_hdmi_audio = false;
+	if (edid) {
+		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+			status = connector_status_connected;
+			hdmi_priv->has_hdmi_sink =
+						drm_detect_hdmi_monitor(edid);
+			hdmi_priv->has_hdmi_audio =
+						drm_detect_monitor_audio(edid);
+		}
+
+		psb_intel_output->base.display_info.raw_edid = NULL;
+		kfree(edid);
+	}
+	return status;
+}
+
+static int cdv_hdmi_set_property(struct drm_connector *connector,
+				       struct drm_property *property,
+				       uint64_t value)
+{
+	struct drm_encoder *encoder = connector->encoder;
+
+	if (!strcmp(property->name, "scaling mode") && encoder) {
+		struct psb_intel_crtc *crtc = to_psb_intel_crtc(encoder->crtc);
+		bool centre;
+		uint64_t curValue;
+
+		if (!crtc)
+			return -1;
+
+		switch (value) {
+		case DRM_MODE_SCALE_FULLSCREEN:
+			break;
+		case DRM_MODE_SCALE_NO_SCALE:
+			break;
+		case DRM_MODE_SCALE_ASPECT:
+			break;
+		default:
+			return -1;
+		}
+
+		if (drm_connector_property_get_value(connector,
+							property, &curValue))
+			return -1;
+
+		if (curValue == value)
+			return 0;
+
+		if (drm_connector_property_set_value(connector,
+							property, value))
+			return -1;
+
+		centre = (curValue == DRM_MODE_SCALE_NO_SCALE) ||
+			(value == DRM_MODE_SCALE_NO_SCALE);
+
+		if (crtc->saved_mode.hdisplay != 0 &&
+		    crtc->saved_mode.vdisplay != 0) {
+			if (centre) {
+				if (!drm_crtc_helper_set_mode(encoder->crtc, &crtc->saved_mode,
+					    encoder->crtc->x, encoder->crtc->y, encoder->crtc->fb))
+					return -1;
+			} else {
+				struct drm_encoder_helper_funcs *helpers
+						    = encoder->helper_private;
+				helpers->mode_set(encoder, &crtc->saved_mode,
+					     &crtc->saved_adjusted_mode);
+			}
+		}
+	}
+	return 0;
+}
+
+/*
+ * Return the list of HDMI DDC modes if available.
+ */
+static int cdv_hdmi_get_modes(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+	struct edid *edid = NULL;
+	int ret = 0;
+
+	edid = drm_get_edid(&psb_intel_output->base,
+			 psb_intel_output->hdmi_i2c_adapter);
+	if (edid) {
+		drm_mode_connector_update_edid_property(&psb_intel_output->
+							base, edid);
+		ret = drm_add_edid_modes(&psb_intel_output->base, edid);
+		kfree(edid);
+	}
+	return ret;
+}
+
+static int cdv_hdmi_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+	if (mode->clock < 20000)
+		return MODE_CLOCK_HIGH;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	/*
+	 * FIXME: for now we limit the size to 1680x1050 on CDV, otherwise it
+	 * will go beyond the stolen memory size allocated to the framebuffer
+	 */
+	if (mode->hdisplay > 1680)
+		return MODE_PANEL;
+	if (mode->vdisplay > 1050)
+		return MODE_PANEL;
+	return MODE_OK;
+}
+
+static void cdv_hdmi_destroy(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+static const struct drm_encoder_helper_funcs cdv_hdmi_helper_funcs = {
+	.dpms = cdv_hdmi_dpms,
+	.mode_fixup = cdv_hdmi_mode_fixup,
+	.prepare = psb_intel_encoder_prepare,
+	.mode_set = cdv_hdmi_mode_set,
+	.commit = psb_intel_encoder_commit,
+};
+
+static const struct drm_connector_helper_funcs
+					cdv_hdmi_connector_helper_funcs = {
+	.get_modes = cdv_hdmi_get_modes,
+	.mode_valid = cdv_hdmi_mode_valid,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+static const struct drm_connector_funcs cdv_hdmi_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.save = cdv_hdmi_save,
+	.restore = cdv_hdmi_restore,
+	.detect = cdv_hdmi_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = cdv_hdmi_set_property,
+	.destroy = cdv_hdmi_destroy,
+};
+
+void cdv_hdmi_init(struct drm_device *dev,
+			struct psb_intel_mode_device *mode_dev, int reg)
+{
+	struct psb_intel_output *psb_intel_output;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct mid_intel_hdmi_priv *hdmi_priv;
+	int ddc_bus;
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
+			       sizeof(struct mid_intel_hdmi_priv), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	hdmi_priv = (struct mid_intel_hdmi_priv *)(psb_intel_output + 1);
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	encoder = &psb_intel_output->enc;
+	drm_connector_init(dev, &psb_intel_output->base,
+			   &cdv_hdmi_connector_funcs,
+			   DRM_MODE_CONNECTOR_DVID);
+
+	drm_encoder_init(dev, &psb_intel_output->enc, &psb_intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_TMDS);
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+	psb_intel_output->type = INTEL_OUTPUT_HDMI;
+	hdmi_priv->hdmi_reg = reg;
+	hdmi_priv->has_hdmi_sink = false;
+	psb_intel_output->dev_priv = hdmi_priv;
+
+	drm_encoder_helper_add(encoder, &cdv_hdmi_helper_funcs);
+	drm_connector_helper_add(connector,
+				 &cdv_hdmi_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	drm_connector_attach_property(connector,
+	    dev->mode_config.scaling_mode_property, DRM_MODE_SCALE_FULLSCREEN);
+
+	switch (reg) {
+	case SDVOB:
+		ddc_bus = GPIOE;
+		break;
+	case SDVOC:
+		ddc_bus = GPIOD;
+		break;
+	default:
+		DRM_ERROR("unknown reg 0x%x for HDMI\n", reg);
+		goto failed_ddc;
+		break;
+	}
+
+	psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+				ddc_bus, (reg == SDVOB) ? "HDMIB" : "HDMIC");
+
+	if (!psb_intel_output->ddc_bus) {
+		dev_err(dev->dev, "No ddc adapter available!\n");
+		goto failed_ddc;
+	}
+	psb_intel_output->hdmi_i2c_adapter =
+				&(psb_intel_output->ddc_bus->adapter);
+	hdmi_priv->dev = dev;
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed_ddc:
+	drm_encoder_cleanup(&psb_intel_output->enc);
+	drm_connector_cleanup(&psb_intel_output->base);
+	kfree(psb_intel_output);
+}

drivers/gpu/drm/gma500/cdv_intel_lvds.c

+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *	Dave Airlie <airlied@linux.ie>
+ *	Jesse Barnes <jesse.barnes@intel.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/dmi.h>
+#include <drm/drmP.h>
+
+#include "intel_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "power.h"
+#include <linux/pm_runtime.h>
+#include "cdv_device.h"
+
+/**
+ * LVDS I2C backlight control macros
+ */
+#define BRIGHTNESS_MAX_LEVEL 100
+#define BRIGHTNESS_MASK 0xFF
+#define BLC_I2C_TYPE	0x01
+#define BLC_PWM_TYPT	0x02
+
+#define BLC_POLARITY_NORMAL 0
+#define BLC_POLARITY_INVERSE 1
+
+#define PSB_BLC_MAX_PWM_REG_FREQ       (0xFFFE)
+#define PSB_BLC_MIN_PWM_REG_FREQ	(0x2)
+#define PSB_BLC_PWM_PRECISION_FACTOR	(10)
+#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)
+#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)
+
+struct cdv_intel_lvds_priv {
+	/**
+	 * Saved LVDO output states
+	 */
+	uint32_t savePP_ON;
+	uint32_t savePP_OFF;
+	uint32_t saveLVDS;
+	uint32_t savePP_CONTROL;
+	uint32_t savePP_CYCLE;
+	uint32_t savePFIT_CONTROL;
+	uint32_t savePFIT_PGM_RATIOS;
+	uint32_t saveBLC_PWM_CTL;
+};
+
+/*
+ * Returns the maximum level of the backlight duty cycle field.
+ */
+static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 retval;
+
+	if (gma_power_begin(dev, false)) {
+		retval = ((REG_READ(BLC_PWM_CTL) &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+		gma_power_end(dev);
+	} else
+		retval = ((dev_priv->saveBLC_PWM_CTL &
+			  BACKLIGHT_MODULATION_FREQ_MASK) >>
+			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+
+	return retval;
+}
+
+/*
+ * Set LVDS backlight level by I2C command
+ */
+static int cdv_lvds_i2c_set_brightness(struct drm_device *dev,
+					unsigned int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
+	u8 out_buf[2];
+	unsigned int blc_i2c_brightness;
+
+	struct i2c_msg msgs[] = {
+		{
+			.addr = lvds_i2c_bus->slave_addr,
+			.flags = 0,
+			.len = 2,
+			.buf = out_buf,
+		}
+	};
+
+	blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
+			     BRIGHTNESS_MASK /
+			     BRIGHTNESS_MAX_LEVEL);
+
+	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
+		blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;
+
+	out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
+	out_buf[1] = (u8)blc_i2c_brightness;
+
+	if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1)
+		return 0;
+
+	DRM_ERROR("I2C transfer error\n");
+	return -1;
+}
+
+
+static int cdv_lvds_pwm_set_brightness(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	u32 max_pwm_blc;
+	u32 blc_pwm_duty_cycle;
+
+	max_pwm_blc = cdv_intel_lvds_get_max_backlight(dev);
+
+	/*BLC_PWM_CTL Should be initiated while backlight device init*/
+	BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0);
+
+	blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;
+
+	if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
+		blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;
+
+	blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
+	REG_WRITE(BLC_PWM_CTL,
+		  (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
+		  (blc_pwm_duty_cycle));
+
+	return 0;
+}
+
+/*
+ * Set LVDS backlight level either by I2C or PWM
+ */
+void cdv_intel_lvds_set_brightness(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+
+	if (!dev_priv->lvds_bl) {
+		DRM_ERROR("NO LVDS Backlight Info\n");
+		return;
+	}
+
+	if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
+		cdv_lvds_i2c_set_brightness(dev, level);
+	else
+		cdv_lvds_pwm_set_brightness(dev, level);
+}
+
+/**
+ * Sets the backlight level.
+ *
+ * level backlight level, from 0 to cdv_intel_lvds_get_max_backlight().
+ */
+static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 blc_pwm_ctl;
+
+	if (gma_power_begin(dev, false)) {
+		blc_pwm_ctl =
+			REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
+		REG_WRITE(BLC_PWM_CTL,
+				(blc_pwm_ctl |
+				(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
+		gma_power_end(dev);
+	} else {
+		blc_pwm_ctl = dev_priv->saveBLC_PWM_CTL &
+				~BACKLIGHT_DUTY_CYCLE_MASK;
+		dev_priv->saveBLC_PWM_CTL = (blc_pwm_ctl |
+					(level << BACKLIGHT_DUTY_CYCLE_SHIFT));
+	}
+}
+
+/**
+ * Sets the power state for the panel.
+ */
+static void cdv_intel_lvds_set_power(struct drm_device *dev,
+				 struct psb_intel_output *output, bool on)
+{
+	u32 pp_status;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	if (on) {
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
+			  POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while ((pp_status & PP_ON) == 0);
+
+		cdv_intel_lvds_set_backlight(dev,
+					 output->
+					 mode_dev->backlight_duty_cycle);
+	} else {
+		cdv_intel_lvds_set_backlight(dev, 0);
+
+		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
+			  ~POWER_TARGET_ON);
+		do {
+			pp_status = REG_READ(PP_STATUS);
+		} while (pp_status & PP_ON);
+	}
+	gma_power_end(dev);
+}
+
+static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	if (mode == DRM_MODE_DPMS_ON)
+		cdv_intel_lvds_set_power(dev, output, true);
+	else
+		cdv_intel_lvds_set_power(dev, output, false);
+	/* XXX: We never power down the LVDS pairs. */
+}
+
+static void cdv_intel_lvds_save(struct drm_connector *connector)
+{
+}
+
+static void cdv_intel_lvds_restore(struct drm_connector *connector)
+{
+}
+
+int cdv_intel_lvds_mode_valid(struct drm_connector *connector,
+				 struct drm_display_mode *mode)
+{
+	struct psb_intel_output *psb_intel_output =
+				to_psb_intel_output(connector);
+	struct drm_display_mode *fixed_mode =
+	    psb_intel_output->mode_dev->panel_fixed_mode;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
+		return MODE_NO_DBLESCAN;
+
+	/* just in case */
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	if (fixed_mode) {
+		if (mode->hdisplay > fixed_mode->hdisplay)
+			return MODE_PANEL;
+		if (mode->vdisplay > fixed_mode->vdisplay)
+			return MODE_PANEL;
+	}
+	return MODE_OK;
+}
+
+bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct psb_intel_mode_device *mode_dev =
+	    enc_to_psb_intel_output(encoder)->mode_dev;
+	struct drm_device *dev = encoder->dev;
+	struct drm_encoder *tmp_encoder;
+	struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;
+
+	/* Should never happen!! */
+	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
+			    head) {
+		if (tmp_encoder != encoder
+		    && tmp_encoder->crtc == encoder->crtc) {
+			printk(KERN_ERR "Can't enable LVDS and another "
+			       "encoder on the same pipe\n");
+			return false;
+		}
+	}
+
+	/*
+	 * If we have timings from the BIOS for the panel, put them in
+	 * to the adjusted mode.  The CRTC will be set up for this mode,
+	 * with the panel scaling set up to source from the H/VDisplay
+	 * of the original mode.
+	 */
+	if (panel_fixed_mode != NULL) {
+		adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
+		adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
+		adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
+		adjusted_mode->htotal = panel_fixed_mode->htotal;
+		adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
+		adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
+		adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
+		adjusted_mode->vtotal = panel_fixed_mode->vtotal;
+		adjusted_mode->clock = panel_fixed_mode->clock;
+		drm_mode_set_crtcinfo(adjusted_mode,
+				      CRTC_INTERLACE_HALVE_V);
+	}
+
+	/*
+	 * XXX: It would be nice to support lower refresh rates on the
+	 * panels to reduce power consumption, and perhaps match the
+	 * user's requested refresh rate.
+	 */
+
+	return true;
+}
+
+static void cdv_intel_lvds_prepare(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (!gma_power_begin(dev, true))
+		return;
+
+	mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
+	mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
+					  BACKLIGHT_DUTY_CYCLE_MASK);
+
+	cdv_intel_lvds_set_power(dev, output, false);
+
+	gma_power_end(dev);
+}
+
+static void cdv_intel_lvds_commit(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct psb_intel_output *output = enc_to_psb_intel_output(encoder);
+	struct psb_intel_mode_device *mode_dev = output->mode_dev;
+
+	if (mode_dev->backlight_duty_cycle == 0)
+		mode_dev->backlight_duty_cycle =
+		    cdv_intel_lvds_get_max_backlight(dev);
+
+	cdv_intel_lvds_set_power(dev, output, true);
+}
+
+static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = encoder->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 pfit_control;
+
+	/*
+	 * The LVDS pin pair will already have been turned on in the
+	 * cdv_intel_crtc_mode_set since it has a large impact on the DPLL
+	 * settings.
+	 */
+
+	/*
+	 * Enable automatic panel scaling so that non-native modes fill the
+	 * screen.  Should be enabled before the pipe is enabled, according to
+	 * register description and PRM.
+	 */
+	if (mode->hdisplay != adjusted_mode->hdisplay ||
+	    mode->vdisplay != adjusted_mode->vdisplay)
+		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
+				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
+				HORIZ_INTERP_BILINEAR);
+	else
+		pfit_control = 0;
+
+	if (dev_priv->lvds_dither)
+		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
+	REG_WRITE(PFIT_CONTROL, pfit_control);
+}
+
+/**
+ * Detect the LVDS connection.
+ *
+ * This always returns CONNECTOR_STATUS_CONNECTED.
+ * This connector should only have
+ * been set up if the LVDS was actually connected anyway.
+ */
+static enum drm_connector_status cdv_intel_lvds_detect(
+				struct drm_connector *connector, bool force)
+{
+	return connector_status_connected;
+}
+
+/**
+ * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
+ */
+static int cdv_intel_lvds_get_modes(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+	struct psb_intel_mode_device *mode_dev =
+					psb_intel_output->mode_dev;
+	int ret;
+
+	ret = psb_intel_ddc_get_modes(psb_intel_output);
+
+	if (ret)
+		return ret;
+
+	/* Didn't get an EDID, so
+	 * Set wide sync ranges so we get all modes
+	 * handed to valid_mode for checking
+	 */
+	connector->display_info.min_vfreq = 0;
+	connector->display_info.max_vfreq = 200;
+	connector->display_info.min_hfreq = 0;
+	connector->display_info.max_hfreq = 200;
+	if (mode_dev->panel_fixed_mode != NULL) {
+		struct drm_display_mode *mode =
+		    drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
+		drm_mode_probed_add(connector, mode);
+		return 1;
+	}
+
+	return 0;
+}
+
+/**
+ * cdv_intel_lvds_destroy - unregister and free LVDS structures
+ * @connector: connector to free
+ *
+ * Unregister the DDC bus for this connector then free the driver private
+ * structure.
+ */
+void cdv_intel_lvds_destroy(struct drm_connector *connector)
+{
+	struct psb_intel_output *psb_intel_output =
+					to_psb_intel_output(connector);
+
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+	drm_sysfs_connector_remove(connector);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}
+
+int cdv_intel_lvds_set_property(struct drm_connector *connector,
+				       struct drm_property *property,
+				       uint64_t value)
+{
+	struct drm_encoder *encoder = connector->encoder;
+
+	if (!strcmp(property->name, "scaling mode") && encoder) {
+		struct psb_intel_crtc *crtc =
+					to_psb_intel_crtc(encoder->crtc);
+		uint64_t curValue;
+
+		if (!crtc)
+			return -1;
+
+		switch (value) {
+		case DRM_MODE_SCALE_FULLSCREEN:
+			break;
+		case DRM_MODE_SCALE_NO_SCALE:
+			break;
+		case DRM_MODE_SCALE_ASPECT:
+			break;
+		default:
+			return -1;
+		}
+
+		if (drm_connector_property_get_value(connector,
+						     property,
+						     &curValue))
+			return -1;
+
+		if (curValue == value)
+			return 0;
+
+		if (drm_connector_property_set_value(connector,
+							property,
+							value))
+			return -1;
+
+		if (crtc->saved_mode.hdisplay != 0 &&
+		    crtc->saved_mode.vdisplay != 0) {
+			if (!drm_crtc_helper_set_mode(encoder->crtc,
+						      &crtc->saved_mode,
+						      encoder->crtc->x,
+						      encoder->crtc->y,
+						      encoder->crtc->fb))
+				return -1;
+		}
+	} else if (!strcmp(property->name, "backlight") && encoder) {
+		if (drm_connector_property_set_value(connector,
+							property,
+							value))
+			return -1;
+		else {
+#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
+			struct drm_psb_private *dev_priv =
+						encoder->dev->dev_private;
+			struct backlight_device *bd =
+						dev_priv->backlight_device;
+			bd->props.brightness = value;
+			backlight_update_status(bd);
+#endif
+		}
+	} else if (!strcmp(property->name, "DPMS") && encoder) {
+		struct drm_encoder_helper_funcs *helpers =
+					encoder->helper_private;
+		helpers->dpms(encoder, value);
+	}
+	return 0;
+}
+
+static const struct drm_encoder_helper_funcs
+					cdv_intel_lvds_helper_funcs = {
+	.dpms = cdv_intel_lvds_encoder_dpms,
+	.mode_fixup = cdv_intel_lvds_mode_fixup,
+	.prepare = cdv_intel_lvds_prepare,
+	.mode_set = cdv_intel_lvds_mode_set,
+	.commit = cdv_intel_lvds_commit,
+};
+
+static const struct drm_connector_helper_funcs
+				cdv_intel_lvds_connector_helper_funcs = {
+	.get_modes = cdv_intel_lvds_get_modes,
+	.mode_valid = cdv_intel_lvds_mode_valid,
+	.best_encoder = psb_intel_best_encoder,
+};
+
+static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.save = cdv_intel_lvds_save,
+	.restore = cdv_intel_lvds_restore,
+	.detect = cdv_intel_lvds_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.set_property = cdv_intel_lvds_set_property,
+	.destroy = cdv_intel_lvds_destroy,
+};
+
+
+static void cdv_intel_lvds_enc_destroy(struct drm_encoder *encoder)
+{
+	drm_encoder_cleanup(encoder);
+}
+
+const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
+	.destroy = cdv_intel_lvds_enc_destroy,
+};
+
+/**
+ * cdv_intel_lvds_init - setup LVDS connectors on this device
+ * @dev: drm device
+ *
+ * Create the connector, register the LVDS DDC bus, and try to figure out what
+ * modes we can display on the LVDS panel (if present).
+ */
+void cdv_intel_lvds_init(struct drm_device *dev,
+		     struct psb_intel_mode_device *mode_dev)
+{
+	struct psb_intel_output *psb_intel_output;
+	struct cdv_intel_lvds_priv *lvds_priv;
+	struct drm_connector *connector;
+	struct drm_encoder *encoder;
+	struct drm_display_mode *scan;
+	struct drm_crtc *crtc;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	u32 lvds;
+	int pipe;
+
+	psb_intel_output = kzalloc(sizeof(struct psb_intel_output) +
+			sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL);
+	if (!psb_intel_output)
+		return;
+
+	lvds_priv = (struct cdv_intel_lvds_priv *)(psb_intel_output + 1);
+
+	psb_intel_output->dev_priv = lvds_priv;
+
+	psb_intel_output->mode_dev = mode_dev;
+	connector = &psb_intel_output->base;
+	encoder = &psb_intel_output->enc;
+
+
+	drm_connector_init(dev, &psb_intel_output->base,
+			   &cdv_intel_lvds_connector_funcs,
+			   DRM_MODE_CONNECTOR_LVDS);
+
+	drm_encoder_init(dev, &psb_intel_output->enc,
+			 &cdv_intel_lvds_enc_funcs,
+			 DRM_MODE_ENCODER_LVDS);
+
+
+	drm_mode_connector_attach_encoder(&psb_intel_output->base,
+					  &psb_intel_output->enc);
+	psb_intel_output->type = INTEL_OUTPUT_LVDS;
+
+	drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs);
+	drm_connector_helper_add(connector,
+				 &cdv_intel_lvds_connector_helper_funcs);
+	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+	connector->interlace_allowed = false;
+	connector->doublescan_allowed = false;
+
+	/*Attach connector properties*/
+	drm_connector_attach_property(connector,
+				      dev->mode_config.scaling_mode_property,
+				      DRM_MODE_SCALE_FULLSCREEN);
+	drm_connector_attach_property(connector,
+				      dev_priv->backlight_property,
+				      BRIGHTNESS_MAX_LEVEL);
+
+	/**
+	 * Set up I2C bus
+	 * FIXME: distroy i2c_bus when exit
+	 */
+	psb_intel_output->i2c_bus = psb_intel_i2c_create(dev,
+							 GPIOB,
+							 "LVDSBLC_B");
+	if (!psb_intel_output->i2c_bus) {
+		dev_printk(KERN_ERR,
+			&dev->pdev->dev, "I2C bus registration failed.\n");
+		goto failed_blc_i2c;
+	}
+	psb_intel_output->i2c_bus->slave_addr = 0x2C;
+	dev_priv->lvds_i2c_bus =  psb_intel_output->i2c_bus;
+
+	/*
+	 * LVDS discovery:
+	 * 1) check for EDID on DDC
+	 * 2) check for VBT data
+	 * 3) check to see if LVDS is already on
+	 *    if none of the above, no panel
+	 * 4) make sure lid is open
+	 *    if closed, act like it's not there for now
+	 */
+
+	/* Set up the DDC bus. */
+	psb_intel_output->ddc_bus = psb_intel_i2c_create(dev,
+							 GPIOC,
+							 "LVDSDDC_C");
+	if (!psb_intel_output->ddc_bus) {
+		dev_printk(KERN_ERR, &dev->pdev->dev,
+			   "DDC bus registration " "failed.\n");
+		goto failed_ddc;
+	}
+
+	/*
+	 * Attempt to get the fixed panel mode from DDC.  Assume that the
+	 * preferred mode is the right one.
+	 */
+	psb_intel_ddc_get_modes(psb_intel_output);
+	list_for_each_entry(scan, &connector->probed_modes, head) {
+		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
+			mode_dev->panel_fixed_mode =
+			    drm_mode_duplicate(dev, scan);
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+
+	/* Failed to get EDID, what about VBT? do we need this?*/
+	if (dev_priv->lfp_lvds_vbt_mode) {
+		mode_dev->panel_fixed_mode =
+			drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
+		if (mode_dev->panel_fixed_mode) {
+			mode_dev->panel_fixed_mode->type |=
+				DRM_MODE_TYPE_PREFERRED;
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+	/*
+	 * If we didn't get EDID, try checking if the panel is already turned
+	 * on.	If so, assume that whatever is currently programmed is the
+	 * correct mode.
+	 */
+	lvds = REG_READ(LVDS);
+	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
+	crtc = psb_intel_get_crtc_from_pipe(dev, pipe);
+
+	if (crtc && (lvds & LVDS_PORT_EN)) {
+		mode_dev->panel_fixed_mode =
+		    cdv_intel_crtc_mode_get(dev, crtc);
+		if (mode_dev->panel_fixed_mode) {
+			mode_dev->panel_fixed_mode->type |=
+			    DRM_MODE_TYPE_PREFERRED;
+			goto out;	/* FIXME: check for quirks */
+		}
+	}
+
+	/* If we still don't have a mode after all that, give up. */
+	if (!mode_dev->panel_fixed_mode) {
+		DRM_DEBUG
+			("Found no modes on the lvds, ignoring the LVDS\n");
+		goto failed_find;
+	}
+
+out:
+	drm_sysfs_connector_add(connector);
+	return;
+
+failed_find:
+	printk(KERN_ERR "Failed find\n");
+	if (psb_intel_output->ddc_bus)
+		psb_intel_i2c_destroy(psb_intel_output->ddc_bus);
+failed_ddc:
+	printk(KERN_ERR "Failed DDC\n");
+	if (psb_intel_output->i2c_bus)
+		psb_intel_i2c_destroy(psb_intel_output->i2c_bus);
+failed_blc_i2c:
+	printk(KERN_ERR "Failed BLC\n");
+	drm_encoder_cleanup(encoder);
+	drm_connector_cleanup(connector);
+	kfree(connector);
+}

drivers/gpu/drm/gma500/framebuffer.h

+/*
+ * Copyright (c) 2008-2011, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *      Eric Anholt <eric@anholt.net>
+ *
+ */
+
+#ifndef _FRAMEBUFFER_H_
+#define _FRAMEBUFFER_H_
+
+#include <drm/drmP.h>
+#include <drm/drm_fb_helper.h>
+
+#include "psb_drv.h"
+
+struct psb_framebuffer {
+	struct drm_framebuffer base;
+	struct address_space *addr_space;
+	struct fb_info *fbdev;
+	struct gtt_range *gtt;
+	bool vm_map;		/* True if we must undo a vm_map_ram */
+};
+
+struct psb_fbdev {
+	struct drm_fb_helper psb_fb_helper;
+	struct psb_framebuffer pfb;
+};
+
+#define to_psb_fb(x) container_of(x, struct psb_framebuffer, base)
+
+extern int psb_intel_connector_clones(struct drm_device *dev, int type_mask);
+
+#endif
+

drivers/gpu/drm/gma500/gem.c

+/*
+ *  psb GEM interface
+ *
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors: Alan Cox
+ *
+ * TODO:
+ *	-	we need to work out if the MMU is relevant (eg for
+ *		accelerated operations on a GEM object)
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm.h>
+#include "psb_drm.h"
+#include "psb_drv.h"
+
+int psb_gem_init_object(struct drm_gem_object *obj)
+{
+	return -EINVAL;
+}
+
+void psb_gem_free_object(struct drm_gem_object *obj)
+{
+	struct gtt_range *gtt = container_of(obj, struct gtt_range, gem);
+	drm_gem_object_release_wrap(obj);
+	/* This must occur last as it frees up the memory of the GEM object */
+	psb_gtt_free_range(obj->dev, gtt);
+}
+
+int psb_gem_get_aperture(struct drm_device *dev, void *data,
+				struct drm_file *file)
+{
+	return -EINVAL;
+}
+
+/**
+ *	psb_gem_dumb_map_gtt	-	buffer mapping for dumb interface
+ *	@file: our drm client file
+ *	@dev: drm device
+ *	@handle: GEM handle to the object (from dumb_create)
+ *
+ *	Do the necessary setup to allow the mapping of the frame buffer
+ *	into user memory. We don't have to do much here at the moment.
+ */
+int psb_gem_dumb_map_gtt(struct drm_file *file, struct drm_device *dev,
+			 uint32_t handle, uint64_t *offset)
+{
+	int ret = 0;
+	struct drm_gem_object *obj;
+
+	if (!(dev->driver->driver_features & DRIVER_GEM))
+		return -ENODEV;
+
+	mutex_lock(&dev->struct_mutex);
+
+	/* GEM does all our handle to object mapping */
+	obj = drm_gem_object_lookup(dev, file, handle);
+	if (obj == NULL) {
+		ret = -ENOENT;
+		goto unlock;
+	}
+	/* What validation is needed here ? */
+
+	/* Make it mmapable */
+	if (!obj->map_list.map) {
+		ret = gem_create_mmap_offset(obj);
+		if (ret)
+			goto out;
+	}
+	/* GEM should really work out the hash offsets for us */
+	*offset = (u64)obj->map_list.hash.key << PAGE_SHIFT;
+out:
+	drm_gem_object_unreference(obj);
+unlock:
+	mutex_unlock(&dev->struct_mutex);
+	return ret;
+}
+
+/**
+ *	psb_gem_create		-	create a mappable object
+ *	@file: the DRM file of the client
+ *	@dev: our device
+ *	@size: the size requested
+ *	@handlep: returned handle (opaque number)
+ *
+ *	Create a GEM object, fill in the boilerplate and attach a handle to
+ *	it so that userspace can speak about it. This does the core work
+ *	for the various methods that do/will create GEM objects for things
+ */
+static int psb_gem_create(struct drm_file *file,
+	struct drm_device *dev, uint64_t size, uint32_t *handlep)
+{
+	struct gtt_range *r;
+	int ret;
+	u32 handle;
+
+	size = roundup(size, PAGE_SIZE);
+
+	/* Allocate our object - for now a direct gtt range which is not
+	   stolen memory backed */
+	r = psb_gtt_alloc_range(dev, size, "gem", 0);
+	if (r == NULL) {
+		dev_err(dev->dev, "no memory for %lld byte GEM object\n", size);
+		return -ENOSPC;
+	}
+	/* Initialize the extra goodies GEM needs to do all the hard work */
+	if (drm_gem_object_init(dev, &r->gem, size) != 0) {
+		psb_gtt_free_range(dev, r);
+		/* GEM doesn't give an error code and we don't have an
+		   EGEMSUCKS so make something up for now - FIXME */
+		dev_err(dev->dev, "GEM init failed for %lld\n", size);
+		return -ENOMEM;
+	}
+	/* Give the object a handle so we can carry it more easily */
+	ret = drm_gem_handle_create(file, &r->gem, &handle);
+	if (ret) {
+		dev_err(dev->dev, "GEM handle failed for %p, %lld\n",
+							&r->gem, size);
+		drm_gem_object_release(&r->gem);
+		psb_gtt_free_range(dev, r);
+		return ret;
+	}
+	/* We have the initial and handle reference but need only one now */
+	drm_gem_object_unreference(&r->gem);
+	*handlep = handle;
+	return 0;
+}
+
+/**
+ *	psb_gem_dumb_create	-	create a dumb buffer
+ *	@drm_file: our client file
+ *	@dev: our device
+ *	@args: the requested arguments copied from userspace
+ *
+ *	Allocate a buffer suitable for use for a frame buffer of the
+ *	form described by user space. Give userspace a handle by which
+ *	to reference it.
+ */
+int psb_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
+			struct drm_mode_create_dumb *args)
+{
+	args->pitch = ALIGN(args->width * ((args->bpp + 7) / 8), 64);
+	args->size = args->pitch * args->height;
+	return psb_gem_create(file, dev, args->size, &args->handle);
+}
+
+/**
+ *	psb_gem_dumb_destroy	-	destroy a dumb buffer
+ *	@file: client file
+ *	@dev: our DRM device
+ *	@handle: the object handle
+ *
+ *	Destroy a handle that was created via psb_gem_dumb_create, at least
+ *	we hope it was created that way. i915 seems to assume the caller
+ *	does the checking but that might be worth review ! FIXME
+ */
+int psb_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
+			uint32_t handle)
+{
+	/* No special work needed, drop the reference and see what falls out */
+	return drm_gem_handle_delete(file, handle);
+}
+
+/**
+ *	psb_gem_fault		-	pagefault handler for GEM objects
+ *	@vma: the VMA of the GEM object
+ *	@vmf: fault detail
+ *
+ *	Invoked when a fault occurs on an mmap of a GEM managed area. GEM
+ *	does most of the work for us including the actual map/unmap calls
+ *	but we need to do the actual page work.
+ *
+ *	This code eventually needs to handle faulting objects in and out
+ *	of the GTT and repacking it when we run out of space. We can put
+ *	that off for now and for our simple uses
+ *
+ *	The VMA was set up by GEM. In doing so it also ensured that the
+ *	vma->vm_private_data points to the GEM object that is backing this
+ *	mapping.
+ *
+ *	FIXME
+ */
+int psb_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct drm_gem_object *obj;
+	struct gtt_range *r;
+	int ret;
+	unsigned long pfn;
+	pgoff_t page_offset;
+	struct drm_device *dev;
+	struct drm_psb_private *dev_priv;
+
+	obj = vma->vm_private_data;	/* GEM object */
+	dev = obj->dev;
+	dev_priv = dev->dev_private;
+
+	r = container_of(obj, struct gtt_range, gem);	/* Get the gtt range */
+
+	/* Make sure we don't parallel update on a fault, nor move or remove
+	   something from beneath our feet */
+	mutex_lock(&dev->struct_mutex);
+
+	/* For now the mmap pins the object and it stays pinned. As things
+	   stand that will do us no harm */
+	if (r->mmapping == 0) {
+		ret = psb_gtt_pin(r);
+		if (ret < 0) {
+			dev_err(dev->dev, "gma500: pin failed: %d\n", ret);
+			goto fail;
+		}
+		r->mmapping = 1;
+	}
+
+	/* Page relative to the VMA start - we must calculate this ourselves
+	   because vmf->pgoff is the fake GEM offset */
+	page_offset = ((unsigned long) vmf->virtual_address - vma->vm_start)
+				>> PAGE_SHIFT;
+
+	/* CPU view of the page, don't go via the GART for CPU writes */
+	if (r->stolen)
+		pfn = (dev_priv->stolen_base + r->offset) >> PAGE_SHIFT;
+	else
+		pfn = page_to_pfn(r->pages[page_offset]);
+	ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn);
+
+fail:
+	mutex_unlock(&dev->struct_mutex);
+	switch (ret) {
+	case 0:
+	case -ERESTARTSYS:
+	case -EINTR:
+		return VM_FAULT_NOPAGE;
+	case -ENOMEM:
+		return VM_FAULT_OOM;
+	default:
+		return VM_FAULT_SIGBUS;
+	}
+}
+
+static int psb_gem_create_stolen(struct drm_file *file, struct drm_device *dev,
+						int size, u32 *handle)
+{
+	struct gtt_range *gtt = psb_gtt_alloc_range(dev, size, "gem", 1);
+	if (gtt == NULL)
+		return -ENOMEM;
+	if (drm_gem_private_object_init(dev, &gtt->gem, size) != 0)
+		goto free_gtt;
+	if (drm_gem_handle_create(file, &gtt->gem, handle) == 0)
+		return 0;
+free_gtt:
+	psb_gtt_free_range(dev, gtt);
+	return -ENOMEM;
+}
+
+/*
+ *	GEM interfaces for our specific client
+ */
+int psb_gem_create_ioctl(struct drm_device *dev, void *data,
+					struct drm_file *file)
+{
+	struct drm_psb_gem_create *args = data;
+	int ret;
+	if (args->flags & PSB_GEM_CREATE_STOLEN) {
+		ret = psb_gem_create_stolen(file, dev, args->size,
+							&args->handle);
+		if (ret == 0)
+			return 0;
+		/* Fall throguh */
+		args->flags &= ~PSB_GEM_CREATE_STOLEN;
+	}
+	return psb_gem_create(file, dev, args->size, &args->handle);
+}
+
+int psb_gem_mmap_ioctl(struct drm_device *dev, void *data,
+					struct drm_file *file)
+{
+	struct drm_psb_gem_mmap *args = data;
+	return dev->driver->dumb_map_offset(file, dev,
+						args->handle, &args->offset);
+}
+

drivers/gpu/drm/gma500/gem_glue.h

+extern void drm_gem_object_release_wrap(struct drm_gem_object *obj);
+extern int gem_create_mmap_offset(struct drm_gem_object *obj);

drivers/gpu/drm/gma500/gtt.h

+/**************************************************************************
+ * Copyright (c) 2007-2008, Intel Corporation.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ **************************************************************************/
+
+#ifndef _PSB_GTT_H_
+#define _PSB_GTT_H_
+
+#include <drm/drmP.h>
+
+/* This wants cleaning up with respect to the psb_dev and un-needed stuff */
+struct psb_gtt {
+	uint32_t gatt_start;
+	uint32_t mmu_gatt_start;
+	uint32_t gtt_start;
+	uint32_t gtt_phys_start;
+	unsigned gtt_pages;
+	unsigned gatt_pages;
+	unsigned long stolen_size;
+	unsigned long vram_stolen_size;
+	struct rw_semaphore sem;
+};
+
+/* Exported functions */
+extern int psb_gtt_init(struct drm_device *dev, int resume);
+extern void psb_gtt_takedown(struct drm_device *dev);
+
+/* Each gtt_range describes an allocation in the GTT area */
+struct gtt_range {
+	struct resource resource;	/* Resource for our allocation */
+	u32 offset;			/* GTT offset of our object */
+	struct drm_gem_object gem;	/* GEM high level stuff */
+	int in_gart;			/* Currently in the GART (ref ct) */
+	bool stolen;			/* Backed from stolen RAM */
+	bool mmapping;			/* Is mmappable */
+	struct page **pages;		/* Backing pages if present */
+	int npage;			/* Number of backing pages */
+};
+
+extern struct gtt_range *psb_gtt_alloc_range(struct drm_device *dev, int len,
+						const char *name, int backed);
+extern void psb_gtt_kref_put(struct gtt_range *gt);
+extern void psb_gtt_free_range(struct drm_device *dev, struct gtt_range *gt);
+extern int psb_gtt_pin(struct gtt_range *gt);
+extern void psb_gtt_unpin(struct gtt_range *gt);
+
+#endif