ARM: tegra: Remove commas from unit addresses on Tegra124

Remove commas from unit addresses as suggested by Rob Herring upon me
posting initial Apalis TK1 support:

	http://article.gmane.org/gmane.linux.ports.tegra/26608

Please keep the remaining 0, notation on the GPU node in place as a
former mainline U-Boot version was looking for that particular notation
in order to perform required fix-ups on it.
Signed-off-by: NMarcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Tested-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi

 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
@@ -78,7 +78,7 @@
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 
@@ -2101,7 +2101,7 @@
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-3 {
 			nvidia,ram-code = <3>;
 

arch/arm/boot/dts/tegra124-jetson-tk1.dts

@@ -10,8 +10,8 @@
 	compatible = "nvidia,jetson-tk1", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 
 		/* This order keeps the mapping DB9 connector <-> ttyS0 */
 		serial0 = &uartd;
@@ -27,7 +27,7 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	pcie-controller@0,01003000 {
+	pcie-controller@01003000 {
 		status = "okay";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -40,21 +40,21 @@
 
 		/* Mini PCIe */
 		pci@1,0 {
-			phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-4}>;
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
 			phy-names = "pcie-0";
 			status = "okay";
 		};
 
 		/* Gigabit Ethernet */
 		pci@2,0 {
-			phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-2}>;
+			phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
 			phy-names = "pcie-0";
 			status = "okay";
 		};
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			hdmi-supply = <&vdd_5v0_hdmi>;
@@ -75,7 +75,7 @@
 		vdd-supply = <&vdd_gpu>;
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
 
@@ -1400,12 +1400,12 @@
 	};
 
 	/* DB9 serial port */
-	serial@0,70006300 {
+	serial@70006300 {
 		status = "okay";
 	};
 
 	/* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -1433,25 +1433,25 @@
 	};
 
 	/* Expansion GEN2_I2C_* */
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* Expansion CAM_I2C_* */
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* HDMI DDC */
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
 	/* Expansion PWR_I2C_*, on-board components */
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -1642,12 +1642,12 @@
 	};
 
 	/* Expansion TS_SPI_* */
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 	};
 
 	/* Internal SPI */
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 		spi-flash@0 {
@@ -1657,7 +1657,7 @@
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -1676,10 +1676,10 @@
 	};
 
 	/* Serial ATA */
-	sata@0,70020000 {
+	sata@70020000 {
 		status = "okay";
 
-		phys = <&{/padctl@0,7009f000/pads/sata/lanes/sata-0}>;
+		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
 		phy-names = "sata-0";
 
 		hvdd-supply = <&vdd_3v3_lp0>;
@@ -1690,15 +1690,15 @@
 		target-12v-supply = <&vdd_12v0_sata>;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	usb@0,70090000 {
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -1713,7 +1713,7 @@
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		status = "okay";
 
 		pads {
@@ -1800,7 +1800,7 @@
 	};
 
 	/* SD card */
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -1810,40 +1810,40 @@
 	};
 
 	/* eMMC */
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
 	/* CPU DFLL clock */
-	clock@0,70110000 {
+	clock@70110000 {
 		status = "okay";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
 
 	/* mini-PCIe USB */
-	usb@0,7d004000 {
+	usb@7d004000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d004000 {
+	usb-phy@7d004000 {
 		status = "okay";
 	};
 
 	/* USB A connector */
-	usb@0,7d008000 {
+	usb@7d008000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d008000 {
+	usb-phy@7d008000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb3_vbus>;
 	};

arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi

 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -67,7 +67,7 @@
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -1754,7 +1754,7 @@
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 

arch/arm/boot/dts/tegra124-nyan-big.dts

@@ -15,7 +15,7 @@
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	sdhci@0,700b0400 { /* SD Card on this bus */
+	sdhci@700b0400 { /* SD Card on this bus */
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
 	};
 
@@ -26,7 +26,7 @@
 		nvidia,model = "GoogleNyanBig";
 	};
 
-	pinmux@0,70000868 {
+	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 

arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi

 / {
-	clock@0,60006000 {
+	clock@60006000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -67,7 +67,7 @@
 		};
 	};
 
-	emc@0,7001b000 {
+	emc@7001b000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 
@@ -1754,7 +1754,7 @@
 		};
 	};
 
-	memory-controller@0,70019000 {
+	memory-controller@70019000 {
 		emc-timings-1 {
 			nvidia,ram-code = <1>;
 

arch/arm/boot/dts/tegra124-nyan-blaze.dts

@@ -22,7 +22,7 @@
 		nvidia,model = "GoogleNyanBlaze";
 	};
 
-	pinmux@0,70000868 {
+	pinmux@70000868 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinmux_default>;
 

arch/arm/boot/dts/tegra124-nyan.dtsi

@@ -3,8 +3,8 @@
 
 / {
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
@@ -16,8 +16,8 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			vdd-supply = <&vdd_3v3_hdmi>;
@@ -29,29 +29,29 @@
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			status = "okay";
 
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
 
-		dpaux@0,545c0000 {
+		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
 		};
 	};
 
-	serial@0,70006000 {
+	serial@70006000 {
 		/* Debug connector on the bottom of the board near SD card. */
 		status = "okay";
 	};
 
-	pwm@0,7000a000 {
+	pwm@7000a000 {
 		status = "okay";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -72,7 +72,7 @@
 		};
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -85,7 +85,7 @@
 		};
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -95,12 +95,12 @@
 		};
 	};
 
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -301,7 +301,7 @@
 		};
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 
 		cros_ec: cros-ec@0 {
@@ -342,7 +342,7 @@
 		};
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 
@@ -353,7 +353,7 @@
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <0>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -364,16 +364,16 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	usb@0,70090000 {
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -388,7 +388,7 @@
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		status = "okay";
 
 		pads {
@@ -467,7 +467,7 @@
 		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	sdhci@0,700b0000 { /* WiFi/BT on this bus */
+	sdhci@700b0000 { /* WiFi/BT on this bus */
 		status = "okay";
 		bus-width = <4>;
 		no-1-8-v;
@@ -478,7 +478,7 @@
 		keep-power-in-suspend;
 	};
 
-	sdhci@0,700b0400 { /* SD Card on this bus */
+	sdhci@700b0400 { /* SD Card on this bus */
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -487,7 +487,7 @@
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@0,700b0600 { /* eMMC on this bus */
+	sdhci@700b0600 { /* eMMC on this bus */
 		status = "okay";
 		bus-width = <8>;
 		no-1-8-v;
@@ -495,14 +495,14 @@
 	};
 
 	/* CPU DFLL clock */
-	clock@0,70110000 {
+	clock@70110000 {
 		status = "disabled";
 		vdd-cpu-supply = <&vdd_cpu>;
 		nvidia,i2c-fs-rate = <400000>;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};

arch/arm/boot/dts/tegra124-venice2.dts

@@ -8,8 +8,8 @@
 	compatible = "nvidia,venice2", "nvidia,tegra124";
 
 	aliases {
-		rtc0 = "/i2c@0,7000d000/pmic@40";
-		rtc1 = "/rtc@0,7000e000";
+		rtc0 = "/i2c@7000d000/pmic@40";
+		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
 	};
 
@@ -21,8 +21,8 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
-	host1x@0,50000000 {
-		hdmi@0,54280000 {
+	host1x@50000000 {
+		hdmi@54280000 {
 			status = "okay";
 
 			vdd-supply = <&vdd_3v3_hdmi>;
@@ -34,14 +34,14 @@
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			status = "okay";
 
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
 
-		dpaux@0,545c0000 {
+		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
 		};
@@ -55,7 +55,7 @@
 		vdd-supply = <&vdd_gpu>;
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
 
@@ -596,15 +596,15 @@
 		};
 	};
 
-	serial@0,70006000 {
+	serial@70006000 {
 		status = "okay";
 	};
 
-	pwm@0,7000a000 {
+	pwm@7000a000 {
 		status = "okay";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -616,7 +616,7 @@
 		};
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		status = "okay";
 		clock-frequency = <100000>;
 
@@ -629,17 +629,17 @@
 		};
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	hdmi_ddc: i2c@0,7000c700 {
+	hdmi_ddc: i2c@7000c700 {
 		status = "okay";
 		clock-frequency = <100000>;
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <400000>;
 
@@ -834,7 +834,7 @@
 		};
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		status = "okay";
 
 		cros_ec: cros-ec@0 {
@@ -874,7 +874,7 @@
 		};
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		status = "okay";
 		spi-max-frequency = <25000000>;
 		spi-flash@0 {
@@ -884,7 +884,7 @@
 		};
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		nvidia,invert-interrupt;
 		nvidia,suspend-mode = <1>;
 		nvidia,cpu-pwr-good-time = <500>;
@@ -895,16 +895,16 @@
 		nvidia,sys-clock-req-active-high;
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		status = "okay";
 	};
 
-	usb@0,70090000 {
-		phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
-		       <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
-		       <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
 		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
 
 		avddio-pex-supply = <&vdd_1v05_run>;
@@ -919,7 +919,7 @@
 		status = "okay";
 	};
 
-	padctl@0,7009f000 {
+	padctl@7009f000 {
 		pads {
 			usb2 {
 				status = "okay";
@@ -998,7 +998,7 @@
 		};
 	};
 
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
@@ -1007,41 +1007,41 @@
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
-	ahub@0,70300000 {
-		i2s@0,70301100 {
+	ahub@70300000 {
+		i2s@70301100 {
 			status = "okay";
 		};
 	};
 
-	usb@0,7d000000 {
+	usb@7d000000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d000000 {
+	usb-phy@7d000000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb1_vbus>;
 	};
 
-	usb@0,7d004000 {
+	usb@7d004000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d004000 {
+	usb-phy@7d004000 {
 		status = "okay";
 		vbus-supply = <&vdd_run_cam>;
 	};
 
-	usb@0,7d008000 {
+	usb@7d008000 {
 		status = "okay";
 	};
 
-	usb-phy@0,7d008000 {
+	usb-phy@7d008000 {
 		status = "okay";
 		vbus-supply = <&vdd_usb3_vbus>;
 	};

arch/arm/boot/dts/tegra124.dtsi

@@ -14,7 +14,7 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	pcie-controller@0,01003000 {
+	pcie-controller@01003000 {
 		compatible = "nvidia,tegra124-pcie";
 		device_type = "pci";
 		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
@@ -77,7 +77,7 @@
 		};
 	};
 
-	host1x@0,50000000 {
+	host1x@50000000 {
 		compatible = "nvidia,tegra124-host1x", "simple-bus";
 		reg = <0x0 0x50000000 0x0 0x00034000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
@@ -91,7 +91,7 @@
 
 		ranges = <0 0x54000000 0 0x54000000 0 0x01000000>;
 
-		dc@0,54200000 {
+		dc@54200000 {
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
@@ -106,7 +106,7 @@
 			nvidia,head = <0>;
 		};
 
-		dc@0,54240000 {
+		dc@54240000 {
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54240000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
@@ -121,7 +121,7 @@
 			nvidia,head = <1>;
 		};
 
-		hdmi@0,54280000 {
+		hdmi@54280000 {
 			compatible = "nvidia,tegra124-hdmi";
 			reg = <0x0 0x54280000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
@@ -133,7 +133,7 @@
 			status = "disabled";
 		};
 
-		sor@0,54540000 {
+		sor@54540000 {
 			compatible = "nvidia,tegra124-sor";
 			reg = <0x0 0x54540000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
@@ -147,7 +147,7 @@
 			status = "disabled";
 		};
 
-		dpaux: dpaux@0,545c0000 {
+		dpaux: dpaux@545c0000 {
 			compatible = "nvidia,tegra124-dpaux";
 			reg = <0x0 0x545c0000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
@@ -160,7 +160,7 @@
 		};
 	};
 
-	gic: interrupt-controller@0,50041000 {
+	gic: interrupt-controller@50041000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -173,6 +173,11 @@
 		interrupt-parent = <&gic>;
 	};
 
+	/*
+	 * Please keep the following 0, notation in place as a former mainline
+	 * U-Boot version was looking for that particular notation in order to
+	 * perform required fix-ups on that GPU node.
+	 */
 	gpu@0,57000000 {
 		compatible = "nvidia,gk20a";
 		reg = <0x0 0x57000000 0x0 0x01000000>,
@@ -203,7 +208,7 @@
 		interrupt-parent = <&gic>;
 	};
 
-	timer@0,60005000 {
+	timer@60005000 {
 		compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer";
 		reg = <0x0 0x60005000 0x0 0x400>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
@@ -215,7 +220,7 @@
 		clocks = <&tegra_car TEGRA124_CLK_TIMER>;
 	};
 
-	tegra_car: clock@0,60006000 {
+	tegra_car: clock@60006000 {
 		compatible = "nvidia,tegra124-car";
 		reg = <0x0 0x60006000 0x0 0x1000>;
 		#clock-cells = <1>;
@@ -223,12 +228,12 @@
 		nvidia,external-memory-controller = <&emc>;
 	};
 
-	flow-controller@0,60007000 {
+	flow-controller@60007000 {
 		compatible = "nvidia,tegra124-flowctrl";
 		reg = <0x0 0x60007000 0x0 0x1000>;
 	};
 
-	actmon@0,6000c800 {
+	actmon@6000c800 {
 		compatible = "nvidia,tegra124-actmon";
 		reg = <0x0 0x6000c800 0x0 0x400>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -239,7 +244,7 @@
 		reset-names = "actmon";
 	};
 
-	gpio: gpio@0,6000d000 {
+	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio";
 		reg = <0x0 0x6000d000 0x0 0x1000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
@@ -259,7 +264,7 @@
 		*/
 	};
 
-	apbdma: dma@0,60020000 {
+	apbdma: dma@60020000 {
 		compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma";
 		reg = <0x0 0x60020000 0x0 0x1400>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -300,13 +305,13 @@
 		#dma-cells = <1>;
 	};
 
-	apbmisc@0,70000800 {
+	apbmisc@70000800 {
 		compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc";
 		reg = <0x0 0x70000800 0x0 0x64>,   /* Chip revision */
 		      <0x0 0x7000e864 0x0 0x04>;   /* Strapping options */
 	};
 
-	pinmux: pinmux@0,70000868 {
+	pinmux: pinmux@70000868 {
 		compatible = "nvidia,tegra124-pinmux";
 		reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */
 		      <0x0 0x70003000 0x0 0x434>, /* Mux registers */
@@ -321,7 +326,7 @@
 	 * the APB DMA based serial driver, the compatible is
 	 * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
 	 */
-	uarta: serial@0,70006000 {
+	uarta: serial@70006000 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006000 0x0 0x40>;
 		reg-shift = <2>;
@@ -334,7 +339,7 @@
 		status = "disabled";
 	};
 
-	uartb: serial@0,70006040 {
+	uartb: serial@70006040 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006040 0x0 0x40>;
 		reg-shift = <2>;
@@ -347,7 +352,7 @@
 		status = "disabled";
 	};
 
-	uartc: serial@0,70006200 {
+	uartc: serial@70006200 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006200 0x0 0x40>;
 		reg-shift = <2>;
@@ -360,7 +365,7 @@
 		status = "disabled";
 	};
 
-	uartd: serial@0,70006300 {
+	uartd: serial@70006300 {
 		compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
 		reg = <0x0 0x70006300 0x0 0x40>;
 		reg-shift = <2>;
@@ -373,7 +378,7 @@
 		status = "disabled";
 	};
 
-	pwm: pwm@0,7000a000 {
+	pwm: pwm@7000a000 {
 		compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
 		reg = <0x0 0x7000a000 0x0 0x100>;
 		#pwm-cells = <2>;
@@ -383,7 +388,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c000 {
+	i2c@7000c000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c000 0x0 0x100>;
 		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -398,7 +403,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c400 {
+	i2c@7000c400 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c400 0x0 0x100>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -413,7 +418,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c500 {
+	i2c@7000c500 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c500 0x0 0x100>;
 		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -428,7 +433,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000c700 {
+	i2c@7000c700 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000c700 0x0 0x100>;
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -443,7 +448,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000d000 {
+	i2c@7000d000 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000d000 0x0 0x100>;
 		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -458,7 +463,7 @@
 		status = "disabled";
 	};
 
-	i2c@0,7000d100 {
+	i2c@7000d100 {
 		compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c";
 		reg = <0x0 0x7000d100 0x0 0x100>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
@@ -473,7 +478,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000d400 {
+	spi@7000d400 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d400 0x0 0x200>;
 		interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
@@ -488,7 +493,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000d600 {
+	spi@7000d600 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d600 0x0 0x200>;
 		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -503,7 +508,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000d800 {
+	spi@7000d800 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000d800 0x0 0x200>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -518,7 +523,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000da00 {
+	spi@7000da00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000da00 0x0 0x200>;
 		interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -533,7 +538,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000dc00 {
+	spi@7000dc00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000dc00 0x0 0x200>;
 		interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
@@ -548,7 +553,7 @@
 		status = "disabled";
 	};
 
-	spi@0,7000de00 {
+	spi@7000de00 {
 		compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
 		reg = <0x0 0x7000de00 0x0 0x200>;
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
@@ -563,21 +568,21 @@
 		status = "disabled";
 	};
 
-	rtc@0,7000e000 {
+	rtc@7000e000 {
 		compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc";
 		reg = <0x0 0x7000e000 0x0 0x100>;
 		interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_RTC>;
 	};
 
-	pmc@0,7000e400 {
+	pmc@7000e400 {
 		compatible = "nvidia,tegra124-pmc";
 		reg = <0x0 0x7000e400 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>;
 		clock-names = "pclk", "clk32k_in";
 	};
 
-	fuse@0,7000f800 {
+	fuse@7000f800 {
 		compatible = "nvidia,tegra124-efuse";
 		reg = <0x0 0x7000f800 0x0 0x400>;
 		clocks = <&tegra_car TEGRA124_CLK_FUSE>;
@@ -586,7 +591,7 @@
 		reset-names = "fuse";
 	};
 
-	mc: memory-controller@0,70019000 {
+	mc: memory-controller@70019000 {
 		compatible = "nvidia,tegra124-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
 		clocks = <&tegra_car TEGRA124_CLK_MC>;
@@ -597,14 +602,14 @@
 		#iommu-cells = <1>;
 	};
 
-	emc: emc@0,7001b000 {
+	emc: emc@7001b000 {
 		compatible = "nvidia,tegra124-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
 
 		nvidia,memory-controller = <&mc>;
 	};
 
-	sata@0,70020000 {
+	sata@70020000 {
 		compatible = "nvidia,tegra124-ahci";
 		reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */
 		      <0x0 0x70020000 0x0 0x7000>; /* SATA */
@@ -621,7 +626,7 @@
 		status = "disabled";
 	};
 
-	hda@0,70030000 {
+	hda@70030000 {
 		compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda";
 		reg = <0x0 0x70030000 0x0 0x10000>;
 		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -636,7 +641,7 @@
 		status = "disabled";
 	};
 
-	usb@0,70090000 {
+	usb@70090000 {
 		compatible = "nvidia,tegra124-xusb";
 		reg = <0x0 0x70090000 0x0 0x8000>,
 		      <0x0 0x70098000 0x0 0x1000>,
@@ -671,7 +676,7 @@
 		status = "disabled";
 	};
 
-	padctl: padctl@0,7009f000 {
+	padctl: padctl@7009f000 {
 		compatible = "nvidia,tegra124-xusb-padctl";
 		reg = <0x0 0x7009f000 0x0 0x1000>;
 		resets = <&tegra_car 142>;
@@ -804,7 +809,7 @@
 		};
 	};
 
-	sdhci@0,700b0000 {
+	sdhci@700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -814,7 +819,7 @@
 		status = "disabled";
 	};
 
-	sdhci@0,700b0200 {
+	sdhci@700b0200 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -824,7 +829,7 @@
 		status = "disabled";
 	};
 
-	sdhci@0,700b0400 {
+	sdhci@700b0400 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -834,7 +839,7 @@
 		status = "disabled";
 	};
 
-	sdhci@0,700b0600 {
+	sdhci@700b0600 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -844,7 +849,7 @@
 		status = "disabled";
 	};
 
-	soctherm: thermal-sensor@0,700e2000 {
+	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
 		reg = <0x0 0x700e2000 0x0 0x1000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -856,7 +861,7 @@
 		#thermal-sensor-cells = <1>;
 	};
 
-	dfll: clock@0,70110000 {
+	dfll: clock@70110000 {
 		compatible = "nvidia,tegra124-dfll";
 		reg = <0 0x70110000 0 0x100>, /* DFLL control */
 		      <0 0x70110000 0 0x100>, /* I2C output control */
@@ -880,7 +885,7 @@
 		status = "disabled";
 	};
 
-	ahub@0,70300000 {
+	ahub@70300000 {
 		compatible = "nvidia,tegra124-ahub";
 		reg = <0x0 0x70300000 0x0 0x200>,
 		      <0x0 0x70300800 0x0 0x800>,
@@ -932,7 +937,7 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 
-		tegra_i2s0: i2s@0,70301000 {
+		tegra_i2s0: i2s@70301000 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301000 0x0 0x100>;
 			nvidia,ahub-cif-ids = <4 4>;
@@ -942,7 +947,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s1: i2s@0,70301100 {
+		tegra_i2s1: i2s@70301100 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301100 0x0 0x100>;
 			nvidia,ahub-cif-ids = <5 5>;
@@ -952,7 +957,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s2: i2s@0,70301200 {
+		tegra_i2s2: i2s@70301200 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301200 0x0 0x100>;
 			nvidia,ahub-cif-ids = <6 6>;
@@ -962,7 +967,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s3: i2s@0,70301300 {
+		tegra_i2s3: i2s@70301300 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301300 0x0 0x100>;
 			nvidia,ahub-cif-ids = <7 7>;
@@ -972,7 +977,7 @@
 			status = "disabled";
 		};
 
-		tegra_i2s4: i2s@0,70301400 {
+		tegra_i2s4: i2s@70301400 {
 			compatible = "nvidia,tegra124-i2s";
 			reg = <0x0 0x70301400 0x0 0x100>;
 			nvidia,ahub-cif-ids = <8 8>;
@@ -983,7 +988,7 @@
 		};
 	};
 
-	usb@0,7d000000 {
+	usb@7d000000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d000000 0x0 0x4000>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -995,7 +1000,7 @@
 		status = "disabled";
 	};
 
-	phy1: usb-phy@0,7d000000 {
+	phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d000000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
@@ -1020,7 +1025,7 @@
 		status = "disabled";
 	};
 
-	usb@0,7d004000 {
+	usb@7d004000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d004000 0x0 0x4000>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -1032,7 +1037,7 @@
 		status = "disabled";
 	};
 
-	phy2: usb-phy@0,7d004000 {
+	phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d004000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;
@@ -1056,7 +1061,7 @@
 		status = "disabled";
 	};
 
-	usb@0,7d008000 {
+	usb@7d008000 {
 		compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
 		reg = <0x0 0x7d008000 0x0 0x4000>;
 		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
@@ -1068,7 +1073,7 @@
 		status = "disabled";
 	};
 
-	phy3: usb-phy@0,7d008000 {
+	phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
 		reg = <0x0 0x7d008000 0x0 0x4000>,
 		      <0x0 0x7d000000 0x0 0x4000>;