提交 b4c21639 编写于 作者: D David S. Miller

niu: Add TX multiqueue support.

Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 92831bc3
......@@ -3236,10 +3236,14 @@ static int release_tx_packet(struct niu *np, struct tx_ring_info *rp, int idx)
static void niu_tx_work(struct niu *np, struct tx_ring_info *rp)
{
struct netdev_queue *txq;
u16 pkt_cnt, tmp;
int cons;
int cons, index;
u64 cs;
index = (rp - np->tx_rings);
txq = netdev_get_tx_queue(np->dev, index);
cs = rp->tx_cs;
if (unlikely(!(cs & (TX_CS_MK | TX_CS_MMK))))
goto out;
......@@ -3262,13 +3266,13 @@ static void niu_tx_work(struct niu *np, struct tx_ring_info *rp)
smp_mb();
out:
if (unlikely(netif_queue_stopped(np->dev) &&
if (unlikely(netif_tx_queue_stopped(txq) &&
(niu_tx_avail(rp) > NIU_TX_WAKEUP_THRESH(rp)))) {
netif_tx_lock(np->dev);
if (netif_queue_stopped(np->dev) &&
__netif_tx_lock(txq, smp_processor_id());
if (netif_tx_queue_stopped(txq) &&
(niu_tx_avail(rp) > NIU_TX_WAKEUP_THRESH(rp)))
netif_wake_queue(np->dev);
netif_tx_unlock(np->dev);
netif_tx_wake_queue(txq);
__netif_tx_unlock(txq);
}
}
......@@ -4061,6 +4065,8 @@ static int niu_alloc_channels(struct niu *np)
np->num_rx_rings = parent->rxchan_per_port[port];
np->num_tx_rings = parent->txchan_per_port[port];
np->dev->real_num_tx_queues = np->num_tx_rings;
np->rx_rings = kzalloc(np->num_rx_rings * sizeof(struct rx_ring_info),
GFP_KERNEL);
err = -ENOMEM;
......@@ -5686,7 +5692,7 @@ static int niu_open(struct net_device *dev)
goto out_free_irq;
}
netif_start_queue(dev);
netif_tx_start_all_queues(dev);
if (np->link_config.loopback_mode != LOOPBACK_DISABLED)
netif_carrier_on(dev);
......@@ -5710,7 +5716,7 @@ static void niu_full_shutdown(struct niu *np, struct net_device *dev)
cancel_work_sync(&np->reset_task);
niu_disable_napi(np);
netif_stop_queue(dev);
netif_tx_stop_all_queues(dev);
del_timer_sync(&np->timer);
......@@ -5971,7 +5977,7 @@ static void niu_netif_start(struct niu *np)
* so long as all callers are assured to have free tx slots
* (such as after niu_init_hw).
*/
netif_wake_queue(np->dev);
netif_tx_wake_all_queues(np->dev);
niu_enable_napi(np);
......@@ -6097,15 +6103,11 @@ static u64 niu_compute_tx_flags(struct sk_buff *skb, struct ethhdr *ehdr,
return ret;
}
static struct tx_ring_info *tx_ring_select(struct niu *np, struct sk_buff *skb)
{
return &np->tx_rings[0];
}
static int niu_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct niu *np = netdev_priv(dev);
unsigned long align, headroom;
struct netdev_queue *txq;
struct tx_ring_info *rp;
struct tx_pkt_hdr *tp;
unsigned int len, nfg;
......@@ -6113,10 +6115,12 @@ static int niu_start_xmit(struct sk_buff *skb, struct net_device *dev)
int prod, i, tlen;
u64 mapping, mrk;
rp = tx_ring_select(np, skb);
i = skb_get_queue_mapping(skb);
rp = &np->tx_rings[i];
txq = netdev_get_tx_queue(dev, i);
if (niu_tx_avail(rp) <= (skb_shinfo(skb)->nr_frags + 1)) {
netif_stop_queue(dev);
netif_tx_stop_queue(txq);
dev_err(np->device, PFX "%s: BUG! Tx ring full when "
"queue awake!\n", dev->name);
rp->tx_errors++;
......@@ -6215,9 +6219,9 @@ static int niu_start_xmit(struct sk_buff *skb, struct net_device *dev)
nw64(TX_RING_KICK(rp->tx_channel), rp->wrap_bit | (prod << 3));
if (unlikely(niu_tx_avail(rp) <= (MAX_SKB_FRAGS + 1))) {
netif_stop_queue(dev);
netif_tx_stop_queue(txq);
if (niu_tx_avail(rp) > NIU_TX_WAKEUP_THRESH(rp))
netif_wake_queue(dev);
netif_tx_wake_queue(txq);
}
dev->trans_start = jiffies;
......@@ -6275,7 +6279,7 @@ static int niu_change_mtu(struct net_device *dev, int new_mtu)
spin_unlock_irq(&np->lock);
if (!err) {
netif_start_queue(dev);
netif_tx_start_all_queues(dev);
if (np->link_config.loopback_mode != LOOPBACK_DISABLED)
netif_carrier_on(dev);
......@@ -8532,9 +8536,10 @@ static struct net_device * __devinit niu_alloc_and_init(
struct of_device *op, const struct niu_ops *ops,
u8 port)
{
struct net_device *dev = alloc_etherdev(sizeof(struct niu));
struct net_device *dev;
struct niu *np;
dev = alloc_etherdev_mq(sizeof(struct niu), NIU_NUM_TXCHAN);
if (!dev) {
dev_err(gen_dev, PFX "Etherdev alloc failed, aborting.\n");
return NULL;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册