Merge tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze

Pull Microblaze updates from Michal Simek:
 - use asm-generic/io.h and fix intc/timer code
 - clean platform handling
 - enable some syscalls

* tag 'microblaze-3.15-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Use asm-generic/io.h
  microblaze: Remove platform folder
  microblaze: Remove generic platform
  microblaze: Sort Kconfig options
  microblaze: Move DTS file to common location at boot/dts folder
  microblaze: Fix compilation failure because of release_thread
  microblaze: Fix sparse warning because of missing cpu.h header
  microblaze: Make timer driver endian aware
  microblaze: Make intc driver endian aware
  microblaze: Wire-up new system calls sched_setattr/getattr
  microblaze: Wire-up preadv/pwritev in syscall table
  microblaze: Enable pselect6 syscall
  microblaze: Drop architecture-specific declaration of early_printk
  microblaze: Rename global function heartbeat()

arch/microblaze/Kconfig

 config MICROBLAZE
 	def_bool y
 	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select HAVE_MEMBLOCK
-	select HAVE_MEMBLOCK_NODE_MAP
-	select HAVE_FUNCTION_TRACER
-	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	select HAVE_FUNCTION_GRAPH_TRACER
-	select HAVE_DYNAMIC_FTRACE
-	select HAVE_FTRACE_MCOUNT_RECORD
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select HAVE_OPROFILE
-	select HAVE_ARCH_KGDB
-	select HAVE_DMA_ATTRS
-	select HAVE_DMA_API_DEBUG
-	select TRACING_SUPPORT
-	select OF
-	select OF_EARLY_FLATTREE
 	select ARCH_WANT_IPC_PARSE_VERSION
-	select HAVE_DEBUG_KMEMLEAK
-	select IRQ_DOMAIN
-	select VIRT_TO_BUS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select BUILDTIME_EXTABLE_SORT
+	select CLKSRC_OF
+	select CLONE_BACKWARDS3
+	select COMMON_CLK
+	select GENERIC_ATOMIC64
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_CPU_DEVICES
+	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP
-	select GENERIC_CPU_DEVICES
-	select GENERIC_ATOMIC64
-	select GENERIC_CLOCKEVENTS
-	select COMMON_CLK
 	select GENERIC_SCHED_CLOCK
-	select GENERIC_IDLE_POLL_SETUP
+	select HAVE_ARCH_KGDB
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_API_DEBUG
+	select HAVE_DMA_ATTRS
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
+	select HAVE_FUNCTION_TRACER
+	select HAVE_MEMBLOCK
+	select HAVE_MEMBLOCK_NODE_MAP
+	select HAVE_OPROFILE
+	select IRQ_DOMAIN
 	select MODULES_USE_ELF_RELA
-	select CLONE_BACKWARDS3
-	select CLKSRC_OF
-	select BUILDTIME_EXTABLE_SORT
+	select OF
+	select OF_EARLY_FLATTREE
+	select TRACING_SUPPORT
+	select VIRT_TO_BUS
 
 config SWAP
 	def_bool n
@@ -74,7 +74,7 @@ source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
 
-source "arch/microblaze/platform/Kconfig.platform"
+source "arch/microblaze/Kconfig.platform"
 
 menu "Processor type and features"
 

arch/microblaze/platform/Kconfig.platform → arch/microblaze/Kconfig.platform

@@ -5,18 +5,6 @@
 #
 
 menu "Platform options"
-choice
-	prompt "Platform"
-	default PLATFORM_MICROBLAZE_AUTO
-	help
-	  Choose which hardware board/platform you are targeting.
-
-config PLATFORM_GENERIC
-	bool "Generic"
-	help
-	  Choose this option for the Generic platform.
-
-endchoice
 
 config OPT_LIB_FUNCTION
 	bool "Optimalized lib function"
@@ -37,8 +25,45 @@ config OPT_LIB_ASM
 	  Allows turn on optimalized library function (memcpy and memmove).
 	  Function are written in asm code.
 
-if PLATFORM_GENERIC=y
-	source "arch/microblaze/platform/generic/Kconfig.auto"
-endif
+# Definitions for MICROBLAZE0
+comment "Definitions for MICROBLAZE0"
+
+config KERNEL_BASE_ADDR
+	hex "Physical address where Linux Kernel is"
+	default "0x90000000"
+	help
+	  BASE Address for kernel
+
+config XILINX_MICROBLAZE0_FAMILY
+	string "Targeted FPGA family"
+	default "virtex5"
+
+config XILINX_MICROBLAZE0_USE_MSR_INSTR
+	int "USE_MSR_INSTR range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_PCMP_INSTR
+	int "USE_PCMP_INSTR range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_BARREL
+	int "USE_BARREL range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_DIV
+	int "USE_DIV range (0:1)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_HW_MUL
+	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
+	default 0
+
+config XILINX_MICROBLAZE0_USE_FPU
+	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
+	default 0
+
+config XILINX_MICROBLAZE0_HW_VER
+	string "Core version number"
+	default 7.10.d
 
 endmenu

arch/microblaze/Makefile

@@ -48,7 +48,6 @@ head-y := arch/microblaze/kernel/head.o
 libs-y += arch/microblaze/lib/
 core-y += arch/microblaze/kernel/
 core-y += arch/microblaze/mm/
-core-y += arch/microblaze/platform/
 core-$(CONFIG_PCI) += arch/microblaze/pci/
 
 drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/

arch/microblaze/boot/dts/system.dts

-../../platform/generic/system.dts
\ No newline at end of file

arch/microblaze/boot/dts/system.dts

+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,microblaze";
+	hard-reset-gpios = <&LEDs_8Bit 2 1>;
+	model = "testing";
+	DDR2_SDRAM: memory@90000000 {
+		device_type = "memory";
+		reg = < 0x90000000 0x10000000 >;
+	} ;
+	aliases {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
+	chosen {
+		bootargs = "console=ttyUL0,115200 highres=on";
+		linux,stdout-path = "/plb@0/serial@84000000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <0x1>;
+		#size-cells = <0>;
+		microblaze_0: cpu@0 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,microblaze-7.10.d";
+			d-cache-baseaddr = <0x90000000>;
+			d-cache-highaddr = <0x9fffffff>;
+			d-cache-line-size = <0x10>;
+			d-cache-size = <0x2000>;
+			device_type = "cpu";
+			i-cache-baseaddr = <0x90000000>;
+			i-cache-highaddr = <0x9fffffff>;
+			i-cache-line-size = <0x10>;
+			i-cache-size = <0x2000>;
+			model = "microblaze,7.10.d";
+			reg = <0>;
+			timebase-frequency = <125000000>;
+			xlnx,addr-tag-bits = <0xf>;
+			xlnx,allow-dcache-wr = <0x1>;
+			xlnx,allow-icache-wr = <0x1>;
+			xlnx,area-optimized = <0x0>;
+			xlnx,cache-byte-size = <0x2000>;
+			xlnx,d-lmb = <0x1>;
+			xlnx,d-opb = <0x0>;
+			xlnx,d-plb = <0x1>;
+			xlnx,data-size = <0x20>;
+			xlnx,dcache-addr-tag = <0xf>;
+			xlnx,dcache-always-used = <0x1>;
+			xlnx,dcache-byte-size = <0x2000>;
+			xlnx,dcache-line-len = <0x4>;
+			xlnx,dcache-use-fsl = <0x1>;
+			xlnx,debug-enabled = <0x1>;
+			xlnx,div-zero-exception = <0x1>;
+			xlnx,dopb-bus-exception = <0x0>;
+			xlnx,dynamic-bus-sizing = <0x1>;
+			xlnx,edge-is-positive = <0x1>;
+			xlnx,family = "virtex5";
+			xlnx,endianness = <0x1>;
+			xlnx,fpu-exception = <0x1>;
+			xlnx,fsl-data-size = <0x20>;
+			xlnx,fsl-exception = <0x0>;
+			xlnx,fsl-links = <0x0>;
+			xlnx,i-lmb = <0x1>;
+			xlnx,i-opb = <0x0>;
+			xlnx,i-plb = <0x1>;
+			xlnx,icache-always-used = <0x1>;
+			xlnx,icache-line-len = <0x4>;
+			xlnx,icache-use-fsl = <0x1>;
+			xlnx,ill-opcode-exception = <0x1>;
+			xlnx,instance = "microblaze_0";
+			xlnx,interconnect = <0x1>;
+			xlnx,interrupt-is-edge = <0x0>;
+			xlnx,iopb-bus-exception = <0x0>;
+			xlnx,mmu-dtlb-size = <0x4>;
+			xlnx,mmu-itlb-size = <0x2>;
+			xlnx,mmu-tlb-access = <0x3>;
+			xlnx,mmu-zones = <0x10>;
+			xlnx,number-of-pc-brk = <0x1>;
+			xlnx,number-of-rd-addr-brk = <0x0>;
+			xlnx,number-of-wr-addr-brk = <0x0>;
+			xlnx,opcode-0x0-illegal = <0x1>;
+			xlnx,pvr = <0x2>;
+			xlnx,pvr-user1 = <0x0>;
+			xlnx,pvr-user2 = <0x0>;
+			xlnx,reset-msr = <0x0>;
+			xlnx,sco = <0x0>;
+			xlnx,unaligned-exceptions = <0x1>;
+			xlnx,use-barrel = <0x1>;
+			xlnx,use-dcache = <0x1>;
+			xlnx,use-div = <0x1>;
+			xlnx,use-ext-brk = <0x1>;
+			xlnx,use-ext-nm-brk = <0x1>;
+			xlnx,use-extended-fsl-instr = <0x0>;
+			xlnx,use-fpu = <0x2>;
+			xlnx,use-hw-mul = <0x2>;
+			xlnx,use-icache = <0x1>;
+			xlnx,use-interrupt = <0x1>;
+			xlnx,use-mmu = <0x3>;
+			xlnx,use-msr-instr = <0x1>;
+			xlnx,use-pcmp-instr = <0x1>;
+		} ;
+	} ;
+	mb_plb: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+		ranges ;
+		FLASH: flash@a0000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xa0000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x1f40>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x0>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x2af8>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ranges ;
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&PIM3>;
+				local-mac-address = [ 00 0a 35 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <0x1>;
+				xlnx,phy-type = <0x1>;
+				xlnx,phyaddr = <0x1>;
+				xlnx,rxcsum = <0x0>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0x0>;
+				xlnx,txcsum = <0x0>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x7735940>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x0>;
+			xlnx,sda-inertial-delay = <0x0>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0x8>;
+			xlnx,interrupt-present = <0x1>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		} ;
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&LEDs_8Bit 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&LEDs_8Bit 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&LEDs_8Bit 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&LEDs_8Bit 7 1>;
+			};
+		} ;
+		RS232_Uart_1: serial@84000000 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,xps-uartlite-1.00.a";
+			current-speed = <115200>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 0 >;
+			port-number = <0>;
+			reg = < 0x84000000 0x10000 >;
+			xlnx,baudrate = <0x1c200>;
+			xlnx,data-bits = <0x8>;
+			xlnx,family = "virtex5";
+			xlnx,odd-parity = <0x0>;
+			xlnx,use-parity = <0x0>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 4 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		debug_module: debug@84400000 {
+			compatible = "xlnx,mdm-1.00.d";
+			reg = < 0x84400000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,interconnect = <0x1>;
+			xlnx,jtag-chain = <0x2>;
+			xlnx,mb-dbg-ports = <0x1>;
+			xlnx,uart-width = <0x8>;
+			xlnx,use-uart = <0x1>;
+			xlnx,write-fsl-ports = <0x0>;
+		} ;
+		mpmc@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,mpmc-4.02.a";
+			ranges ;
+			PIM3: sdma@84600180 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 2 2 1 2 >;
+				reg = < 0x84600180 0x80 >;
+			} ;
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,kind-of-intr = <0x100>;
+			xlnx,num-intr-inputs = <0x9>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,family = "virtex5";
+			xlnx,gen0-assert = <0x1>;
+			xlnx,gen1-assert = <0x1>;
+			xlnx,one-timer-only = <0x0>;
+			xlnx,trig0-assert = <0x1>;
+			xlnx,trig1-assert = <0x1>;
+		} ;
+	} ;
+}  ;

arch/microblaze/include/asm/io.h

@@ -15,7 +15,6 @@
 #include <asm/page.h>
 #include <linux/types.h>
 #include <linux/mm.h>          /* Get struct page {...} */
-#include <asm-generic/iomap.h>
 
 #ifndef CONFIG_PCI
 #define _IO_BASE	0
@@ -25,211 +24,32 @@
 #define _IO_BASE	isa_io_base
 #define _ISA_MEM_BASE	isa_mem_base
 #define PCI_DRAM_OFFSET	pci_dram_offset
-#endif
+struct pci_dev;
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+#define pci_iounmap pci_iounmap
 
 extern unsigned long isa_io_base;
-extern unsigned long pci_io_base;
 extern unsigned long pci_dram_offset;
-
 extern resource_size_t isa_mem_base;
+#endif
 
+#define PCI_IOBASE	((void __iomem *)_IO_BASE)
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
-/* the following is needed to support PCI with some drivers */
-
-#define mmiowb()
-
-static inline unsigned char __raw_readb(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned char __force *)addr;
-}
-static inline unsigned short __raw_readw(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned short __force *)addr;
-}
-static inline unsigned int __raw_readl(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned int __force *)addr;
-}
-static inline unsigned long __raw_readq(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned long __force *)addr;
-}
-static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
-{
-	*(volatile unsigned char __force *)addr = v;
-}
-static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
-{
-	*(volatile unsigned short __force *)addr = v;
-}
-static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
-{
-	*(volatile unsigned int __force *)addr = v;
-}
-static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
-{
-	*(volatile unsigned long __force *)addr = v;
-}
-
-/*
- * read (readb, readw, readl, readq) and write (writeb, writew,
- * writel, writeq) accessors are for PCI and thus little endian.
- * Linux 2.4 for Microblaze had this wrong.
- */
-static inline unsigned char readb(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned char __force *)addr;
-}
-static inline unsigned short readw(const volatile void __iomem *addr)
-{
-	return le16_to_cpu(*(volatile unsigned short __force *)addr);
-}
-static inline unsigned int readl(const volatile void __iomem *addr)
-{
-	return le32_to_cpu(*(volatile unsigned int __force *)addr);
-}
-#define readq readq
-static inline u64 readq(const volatile void __iomem *addr)
-{
-	return le64_to_cpu(__raw_readq(addr));
-}
-static inline void writeb(unsigned char v, volatile void __iomem *addr)
-{
-	*(volatile unsigned char __force *)addr = v;
-}
-static inline void writew(unsigned short v, volatile void __iomem *addr)
-{
-	*(volatile unsigned short __force *)addr = cpu_to_le16(v);
-}
-static inline void writel(unsigned int v, volatile void __iomem *addr)
-{
-	*(volatile unsigned int __force *)addr = cpu_to_le32(v);
-}
-#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
-
-/* ioread and iowrite variants. thease are for now same as __raw_
- * variants of accessors. we might check for endianess in the feature
- */
-#define ioread8(addr)		__raw_readb((u8 *)(addr))
-#define ioread16(addr)		__raw_readw((u16 *)(addr))
-#define ioread32(addr)		__raw_readl((u32 *)(addr))
-#define iowrite8(v, addr)	__raw_writeb((u8)(v), (u8 *)(addr))
-#define iowrite16(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
-#define iowrite32(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
-
-#define ioread16be(addr)	__raw_readw((u16 *)(addr))
-#define ioread32be(addr)	__raw_readl((u32 *)(addr))
-#define iowrite16be(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
-#define iowrite32be(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
-
-/* These are the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl, the "string" versions
- * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
- * inb_p/inw_p/...
- * The macros don't do byte-swapping.
- */
-#define inb(port)		readb((u8 *)((unsigned long)(port)))
-#define outb(val, port)		writeb((val), (u8 *)((unsigned long)(port)))
-#define inw(port)		readw((u16 *)((unsigned long)(port)))
-#define outw(val, port)		writew((val), (u16 *)((unsigned long)(port)))
-#define inl(port)		readl((u32 *)((unsigned long)(port)))
-#define outl(val, port)		writel((val), (u32 *)((unsigned long)(port)))
-
-#define inb_p(port)		inb((port))
-#define outb_p(val, port)	outb((val), (port))
-#define inw_p(port)		inw((port))
-#define outw_p(val, port)	outw((val), (port))
-#define inl_p(port)		inl((port))
-#define outl_p(val, port)	outl((val), (port))
-
-#define memset_io(a, b, c)	memset((void *)(a), (b), (c))
-#define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
-#define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
-
 #ifdef CONFIG_MMU
-
-#define phys_to_virt(addr)	((void *)__phys_to_virt(addr))
-#define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
-#define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))
-
 #define page_to_bus(page)	(page_to_phys(page))
-#define bus_to_virt(addr)	(phys_to_virt(addr))
 
 extern void iounmap(void __iomem *addr);
-/*extern void *__ioremap(phys_addr_t address, unsigned long size,
-		unsigned long flags);*/
-extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-#define ioremap_writethrough(addr, size) ioremap((addr), (size))
-#define ioremap_nocache(addr, size)      ioremap((addr), (size))
-#define ioremap_fullcache(addr, size)    ioremap((addr), (size))
-
-#else /* CONFIG_MMU */
-
-/**
- *	virt_to_phys - map virtual addresses to physical
- *	@address: address to remap
- *
- *	The returned physical address is the physical (CPU) mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses directly mapped or allocated via kmalloc.
- *
- *	This function does not give bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-static inline unsigned long __iomem virt_to_phys(volatile void *address)
-{
-	return __pa((unsigned long)address);
-}
-
-#define virt_to_bus virt_to_phys
-
-/**
- *	phys_to_virt - map physical address to virtual
- *	@address: address to remap
- *
- *	The returned virtual address is a current CPU mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses that have a kernel mapping
- *
- *	This function does not handle bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-static inline void *phys_to_virt(unsigned long address)
-{
-	return (void *)__va(address);
-}
 
-#define bus_to_virt(a) phys_to_virt(a)
-
-static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
-			unsigned long flags)
-{
-	return (void *)address;
-}
-
-#define ioremap(physaddr, size)	((void __iomem *)(unsigned long)(physaddr))
-#define iounmap(addr)		((void)0)
-#define ioremap_nocache(physaddr, size)	ioremap(physaddr, size)
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+#define ioremap_writethrough(addr, size)	ioremap((addr), (size))
+#define ioremap_nocache(addr, size)		ioremap((addr), (size))
+#define ioremap_fullcache(addr, size)		ioremap((addr), (size))
+#define ioremap_wc(addr, size)			ioremap((addr), (size))
 
 #endif /* CONFIG_MMU */
 
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-/*
- * Big Endian
- */
+/* Big Endian */
 #define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
 #define out_be16(a, v) __raw_writew((v), (a))
 
@@ -239,10 +59,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define writel_be(v, a)	out_be32((__force unsigned *)a, v)
 #define readl_be(a)	in_be32((__force unsigned *)a)
 
-/*
- * Little endian
- */
-
+/* Little endian */
 #define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
 #define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
 
@@ -253,100 +70,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define out_8(a, v) __raw_writeb((v), (a))
 #define in_8(a) __raw_readb(a)
 
-#define mmiowb()
-
-#define ioport_map(port, nr)	((void __iomem *)(port))
-#define ioport_unmap(addr)
-
-/* from asm-generic/io.h */
-#ifndef insb
-static inline void insb(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u8 *buf = buffer;
-		do {
-			u8 x = inb(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef insw
-static inline void insw(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u16 *buf = buffer;
-		do {
-			u16 x = inw(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef insl
-static inline void insl(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u32 *buf = buffer;
-		do {
-			u32 x = inl(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef outsb
-static inline void outsb(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u8 *buf = buffer;
-		do {
-			outb(*buf++, addr);
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef outsw
-static inline void outsw(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u16 *buf = buffer;
-		do {
-			outw(*buf++, addr);
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef outsl
-static inline void outsl(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u32 *buf = buffer;
-		do {
-			outl(*buf++, addr);
-		} while (--count);
-	}
-}
-#endif
-
-#define ioread8_rep(p, dst, count) \
-	insb((unsigned long) (p), (dst), (count))
-#define ioread16_rep(p, dst, count) \
-	insw((unsigned long) (p), (dst), (count))
-#define ioread32_rep(p, dst, count) \
-	insl((unsigned long) (p), (dst), (count))
-
-#define iowrite8_rep(p, src, count) \
-	outsb((unsigned long) (p), (src), (count))
-#define iowrite16_rep(p, src, count) \
-	outsw((unsigned long) (p), (src), (count))
-#define iowrite32_rep(p, src, count) \
-	outsl((unsigned long) (p), (src), (count))
+#include <asm-generic/io.h>
 
 #define readb_relaxed	readb
 #define readw_relaxed	readw

arch/microblaze/include/asm/processor.h

@@ -122,7 +122,7 @@ struct thread_struct {
 }
 
 /* Free all resources held by a thread. */
-extern inline void release_thread(struct task_struct *dead_task)
+static inline void release_thread(struct task_struct *dead_task)
 {
 }
 

arch/microblaze/include/asm/setup.h

@@ -19,14 +19,12 @@ extern char cmd_line[COMMAND_LINE_SIZE];
 
 extern char *klimit;
 
-void early_printk(const char *fmt, ...);
-
 int setup_early_printk(char *opt);
 void remap_early_printk(void);
 void disable_early_printk(void);
 
-void heartbeat(void);
-void setup_heartbeat(void);
+void microblaze_heartbeat(void);
+void microblaze_setup_heartbeat(void);
 
 #   ifdef CONFIG_MMU
 extern void mmu_reset(void);

arch/microblaze/include/uapi/asm/unistd.h

@@ -93,7 +93,7 @@
 #define __NR_settimeofday	79 /* ok */
 #define __NR_getgroups		80 /* ok */
 #define __NR_setgroups		81 /* ok */
-#define __NR_select		82 /* obsolete -> sys_pselect7 */
+#define __NR_select		82 /* obsolete -> sys_pselect6 */
 #define __NR_symlink		83 /* symlinkat */
 #define __NR_oldlstat		84 /* remove */
 #define __NR_readlink		85 /* obsolete -> sys_readlinkat */
@@ -320,7 +320,7 @@
 #define __NR_readlinkat		305 /* ok */
 #define __NR_fchmodat		306 /* ok */
 #define __NR_faccessat		307 /* ok */
-#define __NR_pselect6		308 /* obsolete -> sys_pselect7 */
+#define __NR_pselect6		308 /* ok */
 #define __NR_ppoll		309 /* ok */
 #define __NR_unshare		310 /* ok */
 #define __NR_set_robust_list	311 /* ok */
@@ -396,5 +396,7 @@
 #define __NR_process_vm_writev	378
 #define __NR_kcmp		379
 #define __NR_finit_module	380
+#define __NR_sched_setattr	381
+#define __NR_sched_getattr	382
 
 #endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */

arch/microblaze/kernel/Makefile

@@ -16,7 +16,7 @@ extra-y := head.o vmlinux.lds
 
 obj-y += dma.o exceptions.o \
 	hw_exception_handler.o intc.o irq.o \
-	process.o prom.o prom_parse.o ptrace.o \
+	platform.o process.o prom.o prom_parse.o ptrace.o \
 	reset.o setup.o signal.o sys_microblaze.o timer.o traps.o unwind.o
 
 obj-y += cpu/

arch/microblaze/kernel/heartbeat.c

@@ -17,7 +17,7 @@
 
 static unsigned int base_addr;
 
-void heartbeat(void)
+void microblaze_heartbeat(void)
 {
 	static unsigned int cnt, period, dist;
 
@@ -42,7 +42,7 @@ void heartbeat(void)
 	}
 }
 
-void setup_heartbeat(void)
+void microblaze_setup_heartbeat(void)
 {
 	struct device_node *gpio = NULL;
 	int *prop;

arch/microblaze/kernel/intc.c

@@ -32,6 +32,29 @@ static void __iomem *intc_baseaddr;
 #define MER_ME (1<<0)
 #define MER_HIE (1<<1)
 
+static unsigned int (*read_fn)(void __iomem *);
+static void (*write_fn)(u32, void __iomem *);
+
+static void intc_write32(u32 val, void __iomem *addr)
+{
+	iowrite32(val, addr);
+}
+
+static unsigned int intc_read32(void __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+static void intc_write32_be(u32 val, void __iomem *addr)
+{
+	iowrite32be(val, addr);
+}
+
+static unsigned int intc_read32_be(void __iomem *addr)
+{
+	return ioread32be(addr);
+}
+
 static void intc_enable_or_unmask(struct irq_data *d)
 {
 	unsigned long mask = 1 << d->hwirq;
@@ -43,21 +66,21 @@ static void intc_enable_or_unmask(struct irq_data *d)
 	 * acks the irq before calling the interrupt handler
 	 */
 	if (irqd_is_level_type(d))
-		out_be32(intc_baseaddr + IAR, mask);
+		write_fn(mask, intc_baseaddr + IAR);
 
-	out_be32(intc_baseaddr + SIE, mask);
+	write_fn(mask, intc_baseaddr + SIE);
 }
 
 static void intc_disable_or_mask(struct irq_data *d)
 {
 	pr_debug("disable: %ld\n", d->hwirq);
-	out_be32(intc_baseaddr + CIE, 1 << d->hwirq);
+	write_fn(1 << d->hwirq, intc_baseaddr + CIE);
 }
 
 static void intc_ack(struct irq_data *d)
 {
 	pr_debug("ack: %ld\n", d->hwirq);
-	out_be32(intc_baseaddr + IAR, 1 << d->hwirq);
+	write_fn(1 << d->hwirq, intc_baseaddr + IAR);
 }
 
 static void intc_mask_ack(struct irq_data *d)
@@ -65,8 +88,8 @@ static void intc_mask_ack(struct irq_data *d)
 	unsigned long mask = 1 << d->hwirq;
 
 	pr_debug("disable_and_ack: %ld\n", d->hwirq);
-	out_be32(intc_baseaddr + CIE, mask);
-	out_be32(intc_baseaddr + IAR, mask);
+	write_fn(mask, intc_baseaddr + CIE);
+	write_fn(mask, intc_baseaddr + IAR);
 }
 
 static struct irq_chip intc_dev = {
@@ -83,7 +106,7 @@ unsigned int get_irq(void)
 {
 	unsigned int hwirq, irq = -1;
 
-	hwirq = in_be32(intc_baseaddr + IVR);
+	hwirq = read_fn(intc_baseaddr + IVR);
 	if (hwirq != -1U)
 		irq = irq_find_mapping(root_domain, hwirq);
 
@@ -140,17 +163,25 @@ static int __init xilinx_intc_of_init(struct device_node *intc,
 	pr_info("%s: num_irq=%d, edge=0x%x\n",
 		intc->full_name, nr_irq, intr_mask);
 
+	write_fn = intc_write32;
+	read_fn = intc_read32;
+
 	/*
 	 * Disable all external interrupts until they are
 	 * explicity requested.
 	 */
-	out_be32(intc_baseaddr + IER, 0);
+	write_fn(0, intc_baseaddr + IER);
 
 	/* Acknowledge any pending interrupts just in case. */
-	out_be32(intc_baseaddr + IAR, 0xffffffff);
+	write_fn(0xffffffff, intc_baseaddr + IAR);
 
 	/* Turn on the Master Enable. */
-	out_be32(intc_baseaddr + MER, MER_HIE | MER_ME);
+	write_fn(MER_HIE | MER_ME, intc_baseaddr + MER);
+	if (!(read_fn(intc_baseaddr + MER) & (MER_HIE | MER_ME))) {
+		write_fn = intc_write32_be;
+		read_fn = intc_read32_be;
+		write_fn(MER_HIE | MER_ME, intc_baseaddr + MER);
+	}
 
 	/* Yeah, okay, casting the intr_mask to a void* is butt-ugly, but I'm
 	 * lazy and Michal can clean it up to something nicer when he tests

arch/microblaze/kernel/process.c

@@ -8,6 +8,7 @@
  * for more details.
  */
 
+#include <linux/cpu.h>
 #include <linux/export.h>
 #include <linux/sched.h>
 #include <linux/pm.h>

arch/microblaze/kernel/signal.c

@@ -216,7 +216,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		/* MS: I need add offset in page */
 		address += ((unsigned long)frame->tramp) & ~PAGE_MASK;
 		/* MS address is virtual */
-		address = virt_to_phys(address);
+		address = __virt_to_phys(address);
 		invalidate_icache_range(address, address + 8);
 		flush_dcache_range(address, address + 8);
 	}

arch/microblaze/kernel/syscall_table.S

@@ -308,7 +308,7 @@ ENTRY(sys_call_table)
 	.long sys_readlinkat		/* 305 */
 	.long sys_fchmodat
 	.long sys_faccessat
-	.long sys_ni_syscall /* pselect6 */
+	.long sys_pselect6
 	.long sys_ppoll
 	.long sys_unshare		/* 310 */
 	.long sys_set_robust_list
@@ -363,8 +363,8 @@ ENTRY(sys_call_table)
 	.long sys_sendmsg		/* 360 */
 	.long sys_recvmsg
 	.long sys_accept4
-	.long sys_ni_syscall
-	.long sys_ni_syscall
+	.long sys_preadv
+	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo	/* 365 */
 	.long sys_perf_event_open
 	.long sys_recvmmsg
@@ -381,3 +381,5 @@ ENTRY(sys_call_table)
 	.long sys_process_vm_writev
 	.long sys_kcmp
 	.long sys_finit_module
+	.long sys_sched_setattr
+	.long sys_sched_getattr

arch/microblaze/kernel/timer.c

@@ -43,10 +43,33 @@ static unsigned int timer_clock_freq;
 #define TCSR_PWMA	(1<<9)
 #define TCSR_ENALL	(1<<10)
 
+static unsigned int (*read_fn)(void __iomem *);
+static void (*write_fn)(u32, void __iomem *);
+
+static void timer_write32(u32 val, void __iomem *addr)
+{
+	iowrite32(val, addr);
+}
+
+static unsigned int timer_read32(void __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+static void timer_write32_be(u32 val, void __iomem *addr)
+{
+	iowrite32be(val, addr);
+}
+
+static unsigned int timer_read32_be(void __iomem *addr)
+{
+	return ioread32be(addr);
+}
+
 static inline void xilinx_timer0_stop(void)
 {
-	out_be32(timer_baseaddr + TCSR0,
-		 in_be32(timer_baseaddr + TCSR0) & ~TCSR_ENT);
+	write_fn(read_fn(timer_baseaddr + TCSR0) & ~TCSR_ENT,
+		 timer_baseaddr + TCSR0);
 }
 
 static inline void xilinx_timer0_start_periodic(unsigned long load_val)
@@ -54,10 +77,10 @@ static inline void xilinx_timer0_start_periodic(unsigned long load_val)
 	if (!load_val)
 		load_val = 1;
 	/* loading value to timer reg */
-	out_be32(timer_baseaddr + TLR0, load_val);
+	write_fn(load_val, timer_baseaddr + TLR0);
 
 	/* load the initial value */
-	out_be32(timer_baseaddr + TCSR0, TCSR_LOAD);
+	write_fn(TCSR_LOAD, timer_baseaddr + TCSR0);
 
 	/* see timer data sheet for detail
 	 * !ENALL - don't enable 'em all
@@ -72,8 +95,8 @@ static inline void xilinx_timer0_start_periodic(unsigned long load_val)
 	 * UDT - set the timer as down counter
 	 * !MDT0 - generate mode
 	 */
-	out_be32(timer_baseaddr + TCSR0,
-			TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+	write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT,
+		 timer_baseaddr + TCSR0);
 }
 
 static inline void xilinx_timer0_start_oneshot(unsigned long load_val)
@@ -81,13 +104,13 @@ static inline void xilinx_timer0_start_oneshot(unsigned long load_val)
 	if (!load_val)
 		load_val = 1;
 	/* loading value to timer reg */
-	out_be32(timer_baseaddr + TLR0, load_val);
+	write_fn(load_val, timer_baseaddr + TLR0);
 
 	/* load the initial value */
-	out_be32(timer_baseaddr + TCSR0, TCSR_LOAD);
+	write_fn(TCSR_LOAD, timer_baseaddr + TCSR0);
 
-	out_be32(timer_baseaddr + TCSR0,
-			TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT);
+	write_fn(TCSR_TINT|TCSR_ENIT|TCSR_ENT|TCSR_ARHT|TCSR_UDT,
+		 timer_baseaddr + TCSR0);
 }
 
 static int xilinx_timer_set_next_event(unsigned long delta,
@@ -133,14 +156,14 @@ static struct clock_event_device clockevent_xilinx_timer = {
 
 static inline void timer_ack(void)
 {
-	out_be32(timer_baseaddr + TCSR0, in_be32(timer_baseaddr + TCSR0));
+	write_fn(read_fn(timer_baseaddr + TCSR0), timer_baseaddr + TCSR0);
 }
 
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = &clockevent_xilinx_timer;
 #ifdef CONFIG_HEART_BEAT
-	heartbeat();
+	microblaze_heartbeat();
 #endif
 	timer_ack();
 	evt->event_handler(evt);
@@ -169,7 +192,7 @@ static __init void xilinx_clockevent_init(void)
 
 static u64 xilinx_clock_read(void)
 {
-	return in_be32(timer_baseaddr + TCR1);
+	return read_fn(timer_baseaddr + TCR1);
 }
 
 static cycle_t xilinx_read(struct clocksource *cs)
@@ -217,10 +240,10 @@ static int __init xilinx_clocksource_init(void)
 		panic("failed to register clocksource");
 
 	/* stop timer1 */
-	out_be32(timer_baseaddr + TCSR1,
-		 in_be32(timer_baseaddr + TCSR1) & ~TCSR_ENT);
+	write_fn(read_fn(timer_baseaddr + TCSR1) & ~TCSR_ENT,
+		 timer_baseaddr + TCSR1);
 	/* start timer1 - up counting without interrupt */
-	out_be32(timer_baseaddr + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT);
+	write_fn(TCSR_TINT|TCSR_ENT|TCSR_ARHT, timer_baseaddr + TCSR1);
 
 	/* register timecounter - for ftrace support */
 	init_xilinx_timecounter();
@@ -245,6 +268,15 @@ static void __init xilinx_timer_init(struct device_node *timer)
 		BUG();
 	}
 
+	write_fn = timer_write32;
+	read_fn = timer_read32;
+
+	write_fn(TCSR_MDT, timer_baseaddr + TCSR0);
+	if (!(read_fn(timer_baseaddr + TCSR0) & TCSR_MDT)) {
+		write_fn = timer_write32_be;
+		read_fn = timer_read32_be;
+	}
+
 	irq = irq_of_parse_and_map(timer, 0);
 
 	of_property_read_u32(timer, "xlnx,one-timer-only", &timer_num);
@@ -274,7 +306,7 @@ static void __init xilinx_timer_init(struct device_node *timer)
 
 	setup_irq(irq, &timer_irqaction);
 #ifdef CONFIG_HEART_BEAT
-	setup_heartbeat();
+	microblaze_setup_heartbeat();
 #endif
 	xilinx_clocksource_init();
 	xilinx_clockevent_init();

arch/microblaze/mm/consistent.c

@@ -117,7 +117,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle)
 	ret = (void *)va;
 
 	/* This gives us the real physical address of the first page. */
-	*dma_handle = pa = virt_to_bus((void *)vaddr);
+	*dma_handle = pa = __virt_to_phys(vaddr);
 #endif
 
 	/*

arch/microblaze/mm/init.c

@@ -369,7 +369,7 @@ asmlinkage void __init mmu_init(void)
 	if (initrd_start) {
 		unsigned long size;
 		size = initrd_end - initrd_start;
-		memblock_reserve(virt_to_phys(initrd_start), size);
+		memblock_reserve(__virt_to_phys(initrd_start), size);
 	}
 #endif /* CONFIG_BLK_DEV_INITRD */
 

arch/microblaze/mm/pgtable.c

@@ -69,10 +69,11 @@ static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
 	 *
 	 * However, allow remap of rootfs: TBD
 	 */
+
 	if (mem_init_done &&
 		p >= memory_start && p < virt_to_phys(high_memory) &&
-		!(p >= virt_to_phys((unsigned long)&__bss_stop) &&
-		p < virt_to_phys((unsigned long)__bss_stop))) {
+		!(p >= __virt_to_phys((phys_addr_t)__bss_stop) &&
+		p < __virt_to_phys((phys_addr_t)__bss_stop))) {
 		pr_warn("__ioremap(): phys addr "PTE_FMT" is RAM lr %pf\n",
 			(unsigned long)p, __builtin_return_address(0));
 		return NULL;

arch/microblaze/platform/Makefile

-#
-# Makefile for arch/microblaze/platform directory
-#
-#obj-$(CONFIG_PLATFORM_GENERIC) += generic/
-
-obj-y	+= platform.o

arch/microblaze/platform/generic/Kconfig.auto

-#
-# (C) Copyright 2007 Michal Simek
-#
-# Michal SIMEK <monstr@monstr.eu>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Definitions for MICROBLAZE0
-comment "Definitions for MICROBLAZE0"
-
-config KERNEL_BASE_ADDR
-	hex "Physical address where Linux Kernel is"
-	default "0x90000000"
-	help
-	  BASE Address for kernel
-
-config XILINX_MICROBLAZE0_FAMILY
-	string "Targeted FPGA family"
-	default "virtex5"
-
-config XILINX_MICROBLAZE0_USE_MSR_INSTR
-	int "USE_MSR_INSTR range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_PCMP_INSTR
-	int "USE_PCMP_INSTR range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_BARREL
-	int "USE_BARREL range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_DIV
-	int "USE_DIV range (0:1)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_HW_MUL
-	int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)"
-	default 0
-
-config XILINX_MICROBLAZE0_USE_FPU
-	int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)"
-	default 0
-
-config XILINX_MICROBLAZE0_HW_VER
-	string "Core version number"
-	default 7.10.d

arch/microblaze/platform/generic/Makefile

-#
-# Empty Makefile to keep make clean happy
-#

arch/microblaze/platform/generic/system.dts

-/*
- * Device Tree Generator version: 1.1
- *
- * (C) Copyright 2007-2008 Xilinx, Inc.
- * (C) Copyright 2007-2009 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
- *
- * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
- */
-
-/dts-v1/;
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "xlnx,microblaze";
-	hard-reset-gpios = <&LEDs_8Bit 2 1>;
-	model = "testing";
-	DDR2_SDRAM: memory@90000000 {
-		device_type = "memory";
-		reg = < 0x90000000 0x10000000 >;
-	} ;
-	aliases {
-		ethernet0 = &Hard_Ethernet_MAC;
-		serial0 = &RS232_Uart_1;
-	} ;
-	chosen {
-		bootargs = "console=ttyUL0,115200 highres=on";
-		linux,stdout-path = "/plb@0/serial@84000000";
-	} ;
-	cpus {
-		#address-cells = <1>;
-		#cpus = <0x1>;
-		#size-cells = <0>;
-		microblaze_0: cpu@0 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,microblaze-7.10.d";
-			d-cache-baseaddr = <0x90000000>;
-			d-cache-highaddr = <0x9fffffff>;
-			d-cache-line-size = <0x10>;
-			d-cache-size = <0x2000>;
-			device_type = "cpu";
-			i-cache-baseaddr = <0x90000000>;
-			i-cache-highaddr = <0x9fffffff>;
-			i-cache-line-size = <0x10>;
-			i-cache-size = <0x2000>;
-			model = "microblaze,7.10.d";
-			reg = <0>;
-			timebase-frequency = <125000000>;
-			xlnx,addr-tag-bits = <0xf>;
-			xlnx,allow-dcache-wr = <0x1>;
-			xlnx,allow-icache-wr = <0x1>;
-			xlnx,area-optimized = <0x0>;
-			xlnx,cache-byte-size = <0x2000>;
-			xlnx,d-lmb = <0x1>;
-			xlnx,d-opb = <0x0>;
-			xlnx,d-plb = <0x1>;
-			xlnx,data-size = <0x20>;
-			xlnx,dcache-addr-tag = <0xf>;
-			xlnx,dcache-always-used = <0x1>;
-			xlnx,dcache-byte-size = <0x2000>;
-			xlnx,dcache-line-len = <0x4>;
-			xlnx,dcache-use-fsl = <0x1>;
-			xlnx,debug-enabled = <0x1>;
-			xlnx,div-zero-exception = <0x1>;
-			xlnx,dopb-bus-exception = <0x0>;
-			xlnx,dynamic-bus-sizing = <0x1>;
-			xlnx,edge-is-positive = <0x1>;
-			xlnx,family = "virtex5";
-			xlnx,endianness = <0x1>;
-			xlnx,fpu-exception = <0x1>;
-			xlnx,fsl-data-size = <0x20>;
-			xlnx,fsl-exception = <0x0>;
-			xlnx,fsl-links = <0x0>;
-			xlnx,i-lmb = <0x1>;
-			xlnx,i-opb = <0x0>;
-			xlnx,i-plb = <0x1>;
-			xlnx,icache-always-used = <0x1>;
-			xlnx,icache-line-len = <0x4>;
-			xlnx,icache-use-fsl = <0x1>;
-			xlnx,ill-opcode-exception = <0x1>;
-			xlnx,instance = "microblaze_0";
-			xlnx,interconnect = <0x1>;
-			xlnx,interrupt-is-edge = <0x0>;
-			xlnx,iopb-bus-exception = <0x0>;
-			xlnx,mmu-dtlb-size = <0x4>;
-			xlnx,mmu-itlb-size = <0x2>;
-			xlnx,mmu-tlb-access = <0x3>;
-			xlnx,mmu-zones = <0x10>;
-			xlnx,number-of-pc-brk = <0x1>;
-			xlnx,number-of-rd-addr-brk = <0x0>;
-			xlnx,number-of-wr-addr-brk = <0x0>;
-			xlnx,opcode-0x0-illegal = <0x1>;
-			xlnx,pvr = <0x2>;
-			xlnx,pvr-user1 = <0x0>;
-			xlnx,pvr-user2 = <0x0>;
-			xlnx,reset-msr = <0x0>;
-			xlnx,sco = <0x0>;
-			xlnx,unaligned-exceptions = <0x1>;
-			xlnx,use-barrel = <0x1>;
-			xlnx,use-dcache = <0x1>;
-			xlnx,use-div = <0x1>;
-			xlnx,use-ext-brk = <0x1>;
-			xlnx,use-ext-nm-brk = <0x1>;
-			xlnx,use-extended-fsl-instr = <0x0>;
-			xlnx,use-fpu = <0x2>;
-			xlnx,use-hw-mul = <0x2>;
-			xlnx,use-icache = <0x1>;
-			xlnx,use-interrupt = <0x1>;
-			xlnx,use-mmu = <0x3>;
-			xlnx,use-msr-instr = <0x1>;
-			xlnx,use-pcmp-instr = <0x1>;
-		} ;
-	} ;
-	mb_plb: plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
-		ranges ;
-		FLASH: flash@a0000000 {
-			bank-width = <2>;
-			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
-			reg = < 0xa0000000 0x2000000 >;
-			xlnx,family = "virtex5";
-			xlnx,include-datawidth-matching-0 = <0x1>;
-			xlnx,include-datawidth-matching-1 = <0x0>;
-			xlnx,include-datawidth-matching-2 = <0x0>;
-			xlnx,include-datawidth-matching-3 = <0x0>;
-			xlnx,include-negedge-ioregs = <0x0>;
-			xlnx,include-plb-ipif = <0x1>;
-			xlnx,include-wrbuf = <0x1>;
-			xlnx,max-mem-width = <0x10>;
-			xlnx,mch-native-dwidth = <0x20>;
-			xlnx,mch-plb-clk-period-ps = <0x1f40>;
-			xlnx,mch-splb-awidth = <0x20>;
-			xlnx,mch0-accessbuf-depth = <0x10>;
-			xlnx,mch0-protocol = <0x0>;
-			xlnx,mch0-rddatabuf-depth = <0x10>;
-			xlnx,mch1-accessbuf-depth = <0x10>;
-			xlnx,mch1-protocol = <0x0>;
-			xlnx,mch1-rddatabuf-depth = <0x10>;
-			xlnx,mch2-accessbuf-depth = <0x10>;
-			xlnx,mch2-protocol = <0x0>;
-			xlnx,mch2-rddatabuf-depth = <0x10>;
-			xlnx,mch3-accessbuf-depth = <0x10>;
-			xlnx,mch3-protocol = <0x0>;
-			xlnx,mch3-rddatabuf-depth = <0x10>;
-			xlnx,mem0-width = <0x10>;
-			xlnx,mem1-width = <0x20>;
-			xlnx,mem2-width = <0x20>;
-			xlnx,mem3-width = <0x20>;
-			xlnx,num-banks-mem = <0x1>;
-			xlnx,num-channels = <0x0>;
-			xlnx,priority-mode = <0x0>;
-			xlnx,synch-mem-0 = <0x0>;
-			xlnx,synch-mem-1 = <0x0>;
-			xlnx,synch-mem-2 = <0x0>;
-			xlnx,synch-mem-3 = <0x0>;
-			xlnx,synch-pipedelay-0 = <0x2>;
-			xlnx,synch-pipedelay-1 = <0x2>;
-			xlnx,synch-pipedelay-2 = <0x2>;
-			xlnx,synch-pipedelay-3 = <0x2>;
-			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
-			xlnx,tavdv-ps-mem-1 = <0x3a98>;
-			xlnx,tavdv-ps-mem-2 = <0x3a98>;
-			xlnx,tavdv-ps-mem-3 = <0x3a98>;
-			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
-			xlnx,tcedv-ps-mem-1 = <0x3a98>;
-			xlnx,tcedv-ps-mem-2 = <0x3a98>;
-			xlnx,tcedv-ps-mem-3 = <0x3a98>;
-			xlnx,thzce-ps-mem-0 = <0x88b8>;
-			xlnx,thzce-ps-mem-1 = <0x1b58>;
-			xlnx,thzce-ps-mem-2 = <0x1b58>;
-			xlnx,thzce-ps-mem-3 = <0x1b58>;
-			xlnx,thzoe-ps-mem-0 = <0x1b58>;
-			xlnx,thzoe-ps-mem-1 = <0x1b58>;
-			xlnx,thzoe-ps-mem-2 = <0x1b58>;
-			xlnx,thzoe-ps-mem-3 = <0x1b58>;
-			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
-			xlnx,tlzwe-ps-mem-1 = <0x0>;
-			xlnx,tlzwe-ps-mem-2 = <0x0>;
-			xlnx,tlzwe-ps-mem-3 = <0x0>;
-			xlnx,twc-ps-mem-0 = <0x2af8>;
-			xlnx,twc-ps-mem-1 = <0x3a98>;
-			xlnx,twc-ps-mem-2 = <0x3a98>;
-			xlnx,twc-ps-mem-3 = <0x3a98>;
-			xlnx,twp-ps-mem-0 = <0x11170>;
-			xlnx,twp-ps-mem-1 = <0x2ee0>;
-			xlnx,twp-ps-mem-2 = <0x2ee0>;
-			xlnx,twp-ps-mem-3 = <0x2ee0>;
-			xlnx,xcl0-linesize = <0x4>;
-			xlnx,xcl0-writexfer = <0x1>;
-			xlnx,xcl1-linesize = <0x4>;
-			xlnx,xcl1-writexfer = <0x1>;
-			xlnx,xcl2-linesize = <0x4>;
-			xlnx,xcl2-writexfer = <0x1>;
-			xlnx,xcl3-linesize = <0x4>;
-			xlnx,xcl3-writexfer = <0x1>;
-		} ;
-		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,compound";
-			ranges ;
-			ethernet@81c00000 {
-				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 5 2 >;
-				llink-connected = <&PIM3>;
-				local-mac-address = [ 00 0a 35 00 00 00 ];
-				reg = < 0x81c00000 0x40 >;
-				xlnx,bus2core-clk-ratio = <0x1>;
-				xlnx,phy-type = <0x1>;
-				xlnx,phyaddr = <0x1>;
-				xlnx,rxcsum = <0x0>;
-				xlnx,rxfifo = <0x1000>;
-				xlnx,temac-type = <0x0>;
-				xlnx,txcsum = <0x0>;
-				xlnx,txfifo = <0x1000>;
-			} ;
-		} ;
-		IIC_EEPROM: i2c@81600000 {
-			compatible = "xlnx,xps-iic-2.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 6 2 >;
-			reg = < 0x81600000 0x10000 >;
-			xlnx,clk-freq = <0x7735940>;
-			xlnx,family = "virtex5";
-			xlnx,gpo-width = <0x1>;
-			xlnx,iic-freq = <0x186a0>;
-			xlnx,scl-inertial-delay = <0x0>;
-			xlnx,sda-inertial-delay = <0x0>;
-			xlnx,ten-bit-adr = <0x0>;
-		} ;
-		LEDs_8Bit: gpio@81400000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 7 2 >;
-			reg = < 0x81400000 0x10000 >;
-			xlnx,all-inputs = <0x0>;
-			xlnx,all-inputs-2 = <0x0>;
-			xlnx,dout-default = <0x0>;
-			xlnx,dout-default-2 = <0x0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <0x8>;
-			xlnx,interrupt-present = <0x1>;
-			xlnx,is-bidir = <0x1>;
-			xlnx,is-bidir-2 = <0x1>;
-			xlnx,is-dual = <0x0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		} ;
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&LEDs_8Bit 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&LEDs_8Bit 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&LEDs_8Bit 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&LEDs_8Bit 7 1>;
-			};
-		} ;
-		RS232_Uart_1: serial@84000000 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,xps-uartlite-1.00.a";
-			current-speed = <115200>;
-			device_type = "serial";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 8 0 >;
-			port-number = <0>;
-			reg = < 0x84000000 0x10000 >;
-			xlnx,baudrate = <0x1c200>;
-			xlnx,data-bits = <0x8>;
-			xlnx,family = "virtex5";
-			xlnx,odd-parity = <0x0>;
-			xlnx,use-parity = <0x0>;
-		} ;
-		SysACE_CompactFlash: sysace@83600000 {
-			compatible = "xlnx,xps-sysace-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 4 2 >;
-			reg = < 0x83600000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,mem-width = <0x10>;
-		} ;
-		debug_module: debug@84400000 {
-			compatible = "xlnx,mdm-1.00.d";
-			reg = < 0x84400000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,interconnect = <0x1>;
-			xlnx,jtag-chain = <0x2>;
-			xlnx,mb-dbg-ports = <0x1>;
-			xlnx,uart-width = <0x8>;
-			xlnx,use-uart = <0x1>;
-			xlnx,write-fsl-ports = <0x0>;
-		} ;
-		mpmc@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,mpmc-4.02.a";
-			ranges ;
-			PIM3: sdma@84600180 {
-				compatible = "xlnx,ll-dma-1.00.a";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 2 2 1 2 >;
-				reg = < 0x84600180 0x80 >;
-			} ;
-		} ;
-		xps_intc_0: interrupt-controller@81800000 {
-			#interrupt-cells = <0x2>;
-			compatible = "xlnx,xps-intc-1.00.a";
-			interrupt-controller ;
-			reg = < 0x81800000 0x10000 >;
-			xlnx,kind-of-intr = <0x100>;
-			xlnx,num-intr-inputs = <0x9>;
-		} ;
-		xps_timer_1: timer@83c00000 {
-			compatible = "xlnx,xps-timer-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 3 2 >;
-			reg = < 0x83c00000 0x10000 >;
-			xlnx,count-width = <0x20>;
-			xlnx,family = "virtex5";
-			xlnx,gen0-assert = <0x1>;
-			xlnx,gen1-assert = <0x1>;
-			xlnx,one-timer-only = <0x0>;
-			xlnx,trig0-assert = <0x1>;
-			xlnx,trig1-assert = <0x1>;
-		} ;
-	} ;
-}  ;