提交 b3f5dbd0 编写于 作者: J Jean-Francois Moine 提交者: Mauro Carvalho Chehab

V4L/DVB (10352): gspca - spca508: Cleanup code.

Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 ca5e578f
......@@ -101,8 +101,7 @@ static const struct v4l2_pix_format sif_mode[] = {
* Initialization data: this is the first set-up data written to the
* device (before the open data).
*/
static const __u16 spca508_init_data[][3] =
#define IGN(x) /* nothing */
static const u16 spca508_init_data[][2] =
{
/* line URB value, index */
/* 44274 1804 */ {0x0000, 0x870b},
......@@ -589,11 +588,10 @@ static const __u16 spca508_init_data[][3] =
{}
};
/*
* Initialization data for Intel EasyPC Camera CS110
*/
static const __u16 spca508cs110_init_data[][3] = {
static const u16 spca508cs110_init_data[][2] = {
{0x0000, 0x870b}, /* Reset CTL3 */
{0x0003, 0x8111}, /* Soft Reset compression, memory, TG & CDSP */
{0x0000, 0x8111}, /* Normal operation on reset */
......@@ -677,7 +675,7 @@ static const __u16 spca508cs110_init_data[][3] = {
{}
};
static const __u16 spca508_sightcam_init_data[][3] = {
static const u16 spca508_sightcam_init_data[][2] = {
/* This line seems to setup the frame/canvas */
/*368 */ {0x000f, 0x8402},
......@@ -760,7 +758,7 @@ static const __u16 spca508_sightcam_init_data[][3] = {
{}
};
static const __u16 spca508_sightcam2_init_data[][3] = {
static const u16 spca508_sightcam2_init_data[][2] = {
/* 35 */ {0x0020, 0x8112},
/* 36 */ {0x000f, 0x8402},
......@@ -1107,7 +1105,7 @@ static const __u16 spca508_sightcam2_init_data[][3] = {
/*
* Initialization data for Creative Webcam Vista
*/
static const __u16 spca508_vista_init_data[][3] = {
static const u16 spca508_vista_init_data[][2] = {
{0x0008, 0x8200}, /* Clear register */
{0x0000, 0x870b}, /* Reset CTL3 */
{0x0020, 0x8112}, /* Video Drop packet enable */
......@@ -1309,18 +1307,18 @@ static const __u16 spca508_vista_init_data[][3] = {
{0x0050, 0x8703},
{0x0002, 0x8704}, /* External input CKIx1 */
{0x0001, 0x870C}, /* Select CKOx2 output */
{0x009A, 0x8600}, /* Line memory Read Counter (L) */
{0x0001, 0x870c}, /* Select CKOx2 output */
{0x009a, 0x8600}, /* Line memory Read Counter (L) */
{0x0001, 0x8606}, /* 1 Line memory Read Counter (H) Result: (d)410 */
{0x0023, 0x8601},
{0x0010, 0x8602},
{0x000A, 0x8603},
{0x000a, 0x8603},
{0x009A, 0x8600},
{0x0001, 0x865B}, /* 1 Horizontal Offset for Valid Pixel(L) */
{0x0003, 0x865C}, /* Vertical offset for valid lines (L) */
{0x0058, 0x865D}, /* Horizontal valid pixels window (L) */
{0x0048, 0x865E}, /* Vertical valid lines window (L) */
{0x0000, 0x865F},
{0x0001, 0x865b}, /* 1 Horizontal Offset for Valid Pixel(L) */
{0x0003, 0x865c}, /* Vertical offset for valid lines (L) */
{0x0058, 0x865d}, /* Horizontal valid pixels window (L) */
{0x0048, 0x865e}, /* Vertical valid lines window (L) */
{0x0000, 0x865f},
{0x0006, 0x8660},
/* Enable nibble data input, select nibble input order */
......@@ -1328,63 +1326,63 @@ static const __u16 spca508_vista_init_data[][3] = {
{0x0013, 0x8608}, /* A11 Coeficients for color correction */
{0x0028, 0x8609},
/* Note: these values are confirmed at the end of array */
{0x0005, 0x860A}, /* ... */
{0x0025, 0x860B},
{0x00E1, 0x860C},
{0x00FA, 0x860D},
{0x00F4, 0x860E},
{0x00E8, 0x860F},
{0x0005, 0x860a}, /* ... */
{0x0025, 0x860b},
{0x00e1, 0x860c},
{0x00fa, 0x860D},
{0x00f4, 0x860e},
{0x00e8, 0x860f},
{0x0025, 0x8610}, /* A33 Coef. */
{0x00FC, 0x8611}, /* White balance offset: R */
{0x00fc, 0x8611}, /* White balance offset: R */
{0x0001, 0x8612}, /* White balance offset: Gr */
{0x00FE, 0x8613}, /* White balance offset: B */
{0x00fe, 0x8613}, /* White balance offset: B */
{0x0000, 0x8614}, /* White balance offset: Gb */
{0x0064, 0x8651}, /* R gain for white balance (L) */
{0x0040, 0x8652}, /* Gr gain for white balance (L) */
{0x0066, 0x8653}, /* B gain for white balance (L) */
{0x0040, 0x8654}, /* Gb gain for white balance (L) */
{0x0001, 0x863F}, /* Enable fixed gamma correction */
{0x0001, 0x863f}, /* Enable fixed gamma correction */
{0x00A1, 0x8656}, /* Size - Window1: 256x256, Window2: 128x128 */
{0x00a1, 0x8656}, /* Size - Window1: 256x256, Window2: 128x128 */
/* UV division: UV no change, Enable New edge enhancement */
{0x0018, 0x8657}, /* Edge gain high threshold */
{0x0020, 0x8658}, /* Edge gain low threshold */
{0x000A, 0x8659}, /* Edge bandwidth high threshold */
{0x0005, 0x865A}, /* Edge bandwidth low threshold */
{0x0005, 0x865a}, /* Edge bandwidth low threshold */
{0x0064, 0x8607}, /* UV filter enable */
{0x0016, 0x8660},
{0x0000, 0x86B0}, /* Bad pixels compensation address */
{0x00DC, 0x86B1}, /* X coord for bad pixels compensation (L) */
{0x0000, 0x86B2},
{0x0009, 0x86B3}, /* Y coord for bad pixels compensation (L) */
{0x0000, 0x86B4},
{0x0001, 0x86B0},
{0x00F5, 0x86B1},
{0x0000, 0x86B2},
{0x00C6, 0x86B3},
{0x0000, 0x86B4},
{0x0002, 0x86B0},
{0x001C, 0x86B1},
{0x0001, 0x86B2},
{0x00D7, 0x86B3},
{0x0000, 0x86B4},
{0x0003, 0x86B0},
{0x001C, 0x86B1},
{0x0001, 0x86B2},
{0x00D8, 0x86B3},
{0x0000, 0x86B4},
{0x0004, 0x86B0},
{0x001D, 0x86B1},
{0x0001, 0x86B2},
{0x00D8, 0x86B3},
{0x0000, 0x86B4},
{0x001E, 0x8660},
{0x0000, 0x86b0}, /* Bad pixels compensation address */
{0x00dc, 0x86b1}, /* X coord for bad pixels compensation (L) */
{0x0000, 0x86b2},
{0x0009, 0x86b3}, /* Y coord for bad pixels compensation (L) */
{0x0000, 0x86b4},
{0x0001, 0x86b0},
{0x00f5, 0x86b1},
{0x0000, 0x86b2},
{0x00c6, 0x86b3},
{0x0000, 0x86b4},
{0x0002, 0x86b0},
{0x001c, 0x86b1},
{0x0001, 0x86b2},
{0x00d7, 0x86b3},
{0x0000, 0x86b4},
{0x0003, 0x86b0},
{0x001c, 0x86b1},
{0x0001, 0x86b2},
{0x00d8, 0x86b3},
{0x0000, 0x86b4},
{0x0004, 0x86b0},
{0x001d, 0x86b1},
{0x0001, 0x86b2},
{0x00d8, 0x86b3},
{0x0000, 0x86b4},
{0x001e, 0x8660},
/* READ { 0, 0x0000, 0x8608 } ->
0000: 13 */
......@@ -1449,7 +1447,7 @@ static int reg_read(struct gspca_dev *gspca_dev,
}
static int write_vector(struct gspca_dev *gspca_dev,
const __u16 data[][3])
const u16 data[][2])
{
struct usb_device *dev = gspca_dev->dev;
int ret, i = 0;
......@@ -1666,6 +1664,7 @@ static struct usb_driver sd_driver = {
static int __init sd_mod_init(void)
{
int ret;
ret = usb_register(&sd_driver);
if (ret < 0)
return ret;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册