Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 169
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 b3f1f73d 编写于 作者: L Linus Walleij
浏览文件
操作

mach-ux500: delete old keypad board file 

We register keypads per-UIB now, remove this.

Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 71f933f4
隐藏空白更改
内联 并排
Showing with 0 addition and 230 deletion
arch/arm/mach-ux500/Makefile
浏览文件 @ b3f1f73d
...@@ -7,7 +7,6 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ ...@@ -7,7 +7,6 @@ obj-y := clock.o cpu.o devices.o devices-common.o \
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o
obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
board-mop500-keypads.o \
board-mop500-regulators.o \ board-mop500-regulators.o \
board-mop500-uib.o board-mop500-stuib.o \ board-mop500-uib.o board-mop500-stuib.o \
board-mop500-u8500uib.o board-mop500-u8500uib.o
......
arch/arm/mach-ux500/board-mop500-keypads.c 已删除 100644 → 0
浏览文件 @ 71f933f4
/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
*
* Keypad layouts for various boards
*/
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/mfd/stmpe.h>
#include <linux/mfd/tc3589x.h>
#include <linux/input/matrix_keypad.h>
#include <plat/pincfg.h>
#include <plat/ske.h>
#include <mach/devices.h>
#include <mach/hardware.h>
#include "devices-db8500.h"
#include "board-mop500.h"
/* STMPE/SKE keypad use this key layout */
static const unsigned int mop500_keymap[] = {
KEY(2, 5, KEY_END),
KEY(4, 1, KEY_POWER),
KEY(3, 5, KEY_VOLUMEDOWN),
KEY(1, 3, KEY_3),
KEY(5, 2, KEY_RIGHT),
KEY(5, 0, KEY_9),
KEY(0, 5, KEY_MENU),
KEY(7, 6, KEY_ENTER),
KEY(4, 5, KEY_0),
KEY(6, 7, KEY_2),
KEY(3, 4, KEY_UP),
KEY(3, 3, KEY_DOWN),
KEY(6, 4, KEY_SEND),
KEY(6, 2, KEY_BACK),
KEY(4, 2, KEY_VOLUMEUP),
KEY(5, 5, KEY_1),
KEY(4, 3, KEY_LEFT),
KEY(3, 2, KEY_7),
};
static const struct matrix_keymap_data mop500_keymap_data = {
.keymap = mop500_keymap,
.keymap_size = ARRAY_SIZE(mop500_keymap),
};
/*
* Nomadik SKE keypad
*/
#define ROW_PIN_I0 164
#define ROW_PIN_I1 163
#define ROW_PIN_I2 162
#define ROW_PIN_I3 161
#define ROW_PIN_I4 156
#define ROW_PIN_I5 155
#define ROW_PIN_I6 154
#define ROW_PIN_I7 153
#define COL_PIN_O0 168
#define COL_PIN_O1 167
#define COL_PIN_O2 166
#define COL_PIN_O3 165
#define COL_PIN_O4 160
#define COL_PIN_O5 159
#define COL_PIN_O6 158
#define COL_PIN_O7 157
#define SKE_KPD_MAX_ROWS 8
#define SKE_KPD_MAX_COLS 8
static int ske_kp_rows[] = {
ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
};
/*
* ske_set_gpio_row: request and set gpio rows
*/
static int ske_set_gpio_row(int gpio)
{
int ret;
ret = gpio_request(gpio, "ske-kp");
if (ret < 0) {
pr_err("ske_set_gpio_row: gpio request failed\n");
return ret;
}
ret = gpio_direction_output(gpio, 1);
if (ret < 0) {
pr_err("ske_set_gpio_row: gpio direction failed\n");
gpio_free(gpio);
}
return ret;
}
/*
* ske_kp_init - enable the gpio configuration
*/
static int ske_kp_init(void)
{
int ret, i;
for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
ret = ske_set_gpio_row(ske_kp_rows[i]);
if (ret < 0) {
pr_err("ske_kp_init: failed init\n");
return ret;
}
}
return 0;
}
static struct ske_keypad_platform_data ske_keypad_board = {
.init = ske_kp_init,
.keymap_data = &mop500_keymap_data,
.no_autorepeat = true,
.krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */
.kcol = SKE_KPD_MAX_COLS,
.debounce_ms = 40, /* in millisecs */
};
/*
* STMPE1601
*/
static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
.debounce_ms = 64,
.scan_count = 8,
.no_autorepeat = true,
.keymap_data = &mop500_keymap_data,
};
static struct stmpe_platform_data stmpe1601_data = {
.id = 1,
.blocks = STMPE_BLOCK_KEYPAD,
.irq_trigger = IRQF_TRIGGER_FALLING,
.irq_base = MOP500_STMPE1601_IRQ(0),
.keypad = &stmpe1601_keypad_data,
.autosleep = true,
.autosleep_timeout = 1024,
};
static struct i2c_board_info mop500_i2c0_devices_stuib[] = {
{
I2C_BOARD_INFO("stmpe1601", 0x40),
.irq = NOMADIK_GPIO_TO_IRQ(218),
.platform_data = &stmpe1601_data,
.flags = I2C_CLIENT_WAKE,
},
};
/*
* TC35893
*/
static const unsigned int uib_keymap[] = {
KEY(3, 1, KEY_END),
KEY(4, 1, KEY_POWER),
KEY(6, 4, KEY_VOLUMEDOWN),
KEY(4, 2, KEY_EMAIL),
KEY(3, 3, KEY_RIGHT),
KEY(2, 5, KEY_BACKSPACE),
KEY(6, 7, KEY_MENU),
KEY(5, 0, KEY_ENTER),
KEY(4, 3, KEY_0),
KEY(3, 4, KEY_DOT),
KEY(5, 2, KEY_UP),
KEY(3, 5, KEY_DOWN),
KEY(4, 5, KEY_SEND),
KEY(0, 5, KEY_BACK),
KEY(6, 2, KEY_VOLUMEUP),
KEY(1, 3, KEY_SPACE),
KEY(7, 6, KEY_LEFT),
KEY(5, 5, KEY_SEARCH),
};
static struct matrix_keymap_data uib_keymap_data = {
.keymap = uib_keymap,
.keymap_size = ARRAY_SIZE(uib_keymap),
};
static struct tc3589x_keypad_platform_data tc35893_data = {
.krow = TC_KPD_ROWS,
.kcol = TC_KPD_COLUMNS,
.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
.settle_time = TC_KPD_SETTLE_TIME,
.irqtype = IRQF_TRIGGER_FALLING,
.enable_wakeup = true,
.keymap_data = &uib_keymap_data,
.no_autorepeat = true,
};
static struct tc3589x_platform_data tc3589x_keypad_data = {
.block = TC3589x_BLOCK_KEYPAD,
.keypad = &tc35893_data,
.irq_base = MOP500_EGPIO_IRQ_BASE,
};
static struct i2c_board_info mop500_i2c0_devices_uib[] = {
{
I2C_BOARD_INFO("tc3589x", 0x44),
.platform_data = &tc3589x_keypad_data,
.irq = NOMADIK_GPIO_TO_IRQ(218),
.flags = I2C_CLIENT_WAKE,
},
};
void mop500_keypad_init(void)
{
db8500_add_ske_keypad(&ske_keypad_board);
i2c_register_board_info(0, mop500_i2c0_devices_stuib,
ARRAY_SIZE(mop500_i2c0_devices_stuib));
i2c_register_board_info(0, mop500_i2c0_devices_uib,
ARRAY_SIZE(mop500_i2c0_devices_uib));
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或