tty: serial: 8250: Add generic port init macro

This patch removes redundant 8250 port initialization macros and
replaces them by a single generic base-macro, which is specialized
as needed.
Signed-off-by: NAnton Würfel <anton.wuerfel@fau.de>
Signed-off-by: NPhillip Raffeck <phillip.raffeck@fau.de>
Suggested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-kernel@i4.cs.fau.de
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/8250/8250.h

@@ -92,6 +92,18 @@ struct serial8250_config {
 #define SERIAL8250_SHARE_IRQS 0
 #endif
 
+#define SERIAL8250_PORT_FLAGS(_base, _irq, _flags)		\
+	{							\
+		.iobase		= _base,			\
+		.irq		= _irq,				\
+		.uartclk	= 1843200,			\
+		.iotype		= UPIO_PORT,			\
+		.flags		= UPF_BOOT_AUTOCONF | (_flags),	\
+	}
+
+#define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0)
+
+
 static inline int serial_in(struct uart_8250_port *up, int offset)
 {
 	return up->port.serial_in(&up->port, offset);

drivers/tty/serial/8250/8250_accent.c

@@ -10,18 +10,11 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
-#define PORT(_base,_irq)				\
-	{						\
-		.iobase		= _base,		\
-		.irq		= _irq,			\
-		.uartclk	= 1843200,		\
-		.iotype		= UPIO_PORT,		\
-		.flags		= UPF_BOOT_AUTOCONF,	\
-	}
+#include "8250.h"
 
 static struct plat_serial8250_port accent_data[] = {
-	PORT(0x330, 4),
-	PORT(0x338, 4),
+	SERIAL8250_PORT(0x330, 4),
+	SERIAL8250_PORT(0x338, 4),
 	{ },
 };
 

drivers/tty/serial/8250/8250_boca.c

@@ -10,32 +10,25 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
-#define PORT(_base,_irq)				\
-	{						\
-		.iobase		= _base,		\
-		.irq		= _irq,			\
-		.uartclk	= 1843200,		\
-		.iotype		= UPIO_PORT,		\
-		.flags		= UPF_BOOT_AUTOCONF,	\
-	}
+#include "8250.h"
 
 static struct plat_serial8250_port boca_data[] = {
-	PORT(0x100, 12),
-	PORT(0x108, 12),
-	PORT(0x110, 12),
-	PORT(0x118, 12),
-	PORT(0x120, 12),
-	PORT(0x128, 12),
-	PORT(0x130, 12),
-	PORT(0x138, 12),
-	PORT(0x140, 12),
-	PORT(0x148, 12),
-	PORT(0x150, 12),
-	PORT(0x158, 12),
-	PORT(0x160, 12),
-	PORT(0x168, 12),
-	PORT(0x170, 12),
-	PORT(0x178, 12),
+	SERIAL8250_PORT(0x100, 12),
+	SERIAL8250_PORT(0x108, 12),
+	SERIAL8250_PORT(0x110, 12),
+	SERIAL8250_PORT(0x118, 12),
+	SERIAL8250_PORT(0x120, 12),
+	SERIAL8250_PORT(0x128, 12),
+	SERIAL8250_PORT(0x130, 12),
+	SERIAL8250_PORT(0x138, 12),
+	SERIAL8250_PORT(0x140, 12),
+	SERIAL8250_PORT(0x148, 12),
+	SERIAL8250_PORT(0x150, 12),
+	SERIAL8250_PORT(0x158, 12),
+	SERIAL8250_PORT(0x160, 12),
+	SERIAL8250_PORT(0x168, 12),
+	SERIAL8250_PORT(0x170, 12),
+	SERIAL8250_PORT(0x178, 12),
 	{ },
 };
 

drivers/tty/serial/8250/8250_exar_st16c554.c

@@ -13,20 +13,13 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
-#define PORT(_base,_irq)				\
-	{						\
-		.iobase		= _base,		\
-		.irq		= _irq,			\
-		.uartclk	= 1843200,		\
-		.iotype		= UPIO_PORT,		\
-		.flags		= UPF_BOOT_AUTOCONF,	\
-	}
+#include "8250.h"
 
 static struct plat_serial8250_port exar_data[] = {
-	PORT(0x100, 5),
-	PORT(0x108, 5),
-	PORT(0x110, 5),
-	PORT(0x118, 5),
+	SERIAL8250_PORT(0x100, 5),
+	SERIAL8250_PORT(0x108, 5),
+	SERIAL8250_PORT(0x110, 5),
+	SERIAL8250_PORT(0x118, 5),
 	{ },
 };
 

drivers/tty/serial/8250/8250_fourport.c

@@ -10,24 +10,20 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 
-#define PORT(_base,_irq)						\
-	{								\
-		.iobase		= _base,				\
-		.irq		= _irq,					\
-		.uartclk	= 1843200,				\
-		.iotype		= UPIO_PORT,				\
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FOURPORT,	\
-	}
+#include "8250.h"
+
+#define SERIAL8250_FOURPORT(_base, _irq) \
+	SERIAL8250_PORT_FLAGS(_base, _irq, UPF_FOURPORT)
 
 static struct plat_serial8250_port fourport_data[] = {
-	PORT(0x1a0, 9),
-	PORT(0x1a8, 9),
-	PORT(0x1b0, 9),
-	PORT(0x1b8, 9),
-	PORT(0x2a0, 5),
-	PORT(0x2a8, 5),
-	PORT(0x2b0, 5),
-	PORT(0x2b8, 5),
+	SERIAL8250_FOURPORT(0x1a0, 9),
+	SERIAL8250_FOURPORT(0x1a8, 9),
+	SERIAL8250_FOURPORT(0x1b0, 9),
+	SERIAL8250_FOURPORT(0x1b8, 9),
+	SERIAL8250_FOURPORT(0x2a0, 5),
+	SERIAL8250_FOURPORT(0x2a8, 5),
+	SERIAL8250_FOURPORT(0x2b0, 5),
+	SERIAL8250_FOURPORT(0x2b8, 5),
 	{ },
 };