提交 b370e082 编写于 作者: H Hartley Sweeten 提交者: Russell King

ARM: 5992/1: ep93xx: pass platform startup data as __initdata

A number of the peripherals for the ep93xx are registered at
startup using platform_data that is passed from the board init
code to the core code.  This data is then copied to a local
static variable in the core code.  Since the data is copied,
the original data can be marked as __initdata and discarded
after startup is complete.

This adds the __initdata tag to all the appropriate data in
the various ep93xx board init's.  Specifically, all the
struct ep93xx_eth_data, struct ep93xxfb_mach_info, and
struct i2c_gpio_platform_data.

Also, document the various registration functions and note
what data should be marked as __initdata.

While here, also cleanup a couple over zealous whitespace tabs.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 b0c4c898
......@@ -41,7 +41,7 @@ static struct platform_device adssphere_flash = {
.resource = &adssphere_flash_resource,
};
static struct ep93xx_eth_data adssphere_eth_data = {
static struct ep93xx_eth_data __initdata adssphere_eth_data = {
.phy_id = 1,
};
......
......@@ -330,6 +330,10 @@ static struct platform_device ep93xx_ohci_device = {
.resource = ep93xx_ohci_resources,
};
/*************************************************************************
* EP93xx ethernet peripheral handling
*************************************************************************/
static struct ep93xx_eth_data ep93xx_eth_data;
static struct resource ep93xx_eth_resource[] = {
......@@ -354,6 +358,12 @@ static struct platform_device ep93xx_eth_device = {
.resource = ep93xx_eth_resource,
};
/**
* ep93xx_register_eth - Register the built-in ethernet platform device.
* @data: platform specific ethernet configuration (__initdata)
* @copy_addr: flag indicating that the MAC address should be copied
* from the IndAd registers (as programmed by the bootloader)
*/
void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
{
if (copy_addr)
......@@ -370,11 +380,19 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
static struct i2c_gpio_platform_data ep93xx_i2c_data;
static struct platform_device ep93xx_i2c_device = {
.name = "i2c-gpio",
.id = 0,
.dev.platform_data = &ep93xx_i2c_data,
.name = "i2c-gpio",
.id = 0,
.dev = {
.platform_data = &ep93xx_i2c_data,
},
};
/**
* ep93xx_register_i2c - Register the i2c platform device.
* @data: platform specific i2c-gpio configuration (__initdata)
* @devices: platform specific i2c bus device information (__initdata)
* @num: the number of devices on the i2c bus
*/
void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
struct i2c_board_info *devices, int num)
{
......@@ -404,11 +422,11 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
*************************************************************************/
static struct gpio_led ep93xx_led_pins[] = {
{
.name = "platform:grled",
.gpio = EP93XX_GPIO_LINE_GRLED,
.name = "platform:grled",
.gpio = EP93XX_GPIO_LINE_GRLED,
}, {
.name = "platform:rdled",
.gpio = EP93XX_GPIO_LINE_RDLED,
.name = "platform:rdled",
.gpio = EP93XX_GPIO_LINE_RDLED,
},
};
......@@ -528,7 +546,7 @@ static struct platform_device ep93xx_fb_device = {
.name = "ep93xx-fb",
.id = -1,
.dev = {
.platform_data = &ep93xxfb_data,
.platform_data = &ep93xxfb_data,
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &ep93xx_fb_device.dev.coherent_dma_mask,
},
......@@ -536,6 +554,10 @@ static struct platform_device ep93xx_fb_device = {
.resource = ep93xx_fb_resource,
};
/**
* ep93xx_register_fb - Register the framebuffer platform device.
* @data: platform specific framebuffer configuration (__initdata)
*/
void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
{
ep93xxfb_data = *data;
......@@ -546,6 +568,8 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
/*************************************************************************
* EP93xx matrix keypad peripheral handling
*************************************************************************/
static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
static struct resource ep93xx_keypad_resource[] = {
{
.start = EP93XX_KEY_MATRIX_PHYS_BASE,
......@@ -559,15 +583,22 @@ static struct resource ep93xx_keypad_resource[] = {
};
static struct platform_device ep93xx_keypad_device = {
.name = "ep93xx-keypad",
.id = -1,
.num_resources = ARRAY_SIZE(ep93xx_keypad_resource),
.resource = ep93xx_keypad_resource,
.name = "ep93xx-keypad",
.id = -1,
.dev = {
.platform_data = &ep93xx_keypad_data,
},
.num_resources = ARRAY_SIZE(ep93xx_keypad_resource),
.resource = ep93xx_keypad_resource,
};
/**
* ep93xx_register_keypad - Register the keypad platform device.
* @data: platform specific keypad configuration (__initdata)
*/
void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
{
ep93xx_keypad_device.dev.platform_data = data;
ep93xx_keypad_data = *data;
platform_device_register(&ep93xx_keypad_device);
}
......
......@@ -74,7 +74,7 @@ static void __init edb93xx_register_flash(void)
}
}
static struct ep93xx_eth_data edb93xx_eth_data = {
static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
.phy_id = 1,
};
......@@ -82,7 +82,7 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
/*************************************************************************
* EDB93xx i2c peripheral handling
*************************************************************************/
static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = {
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
.sda_is_open_drain = 0,
.scl_pin = EP93XX_GPIO_LINE_EECLK,
......
......@@ -41,7 +41,7 @@ static struct platform_device gesbc9312_flash = {
.resource = &gesbc9312_flash_resource,
};
static struct ep93xx_eth_data gesbc9312_eth_data = {
static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
.phy_id = 1,
};
......
......@@ -80,7 +80,7 @@ static void __init micro9_register_flash(void)
/*************************************************************************
* Micro9 Ethernet
*************************************************************************/
static struct ep93xx_eth_data micro9_eth_data = {
static struct ep93xx_eth_data __initdata micro9_eth_data = {
.phy_id = 0x1f,
};
......
......@@ -49,17 +49,17 @@ static struct platform_device simone_flash = {
},
};
static struct ep93xx_eth_data simone_eth_data = {
static struct ep93xx_eth_data __initdata simone_eth_data = {
.phy_id = 1,
};
static struct ep93xxfb_mach_info simone_fb_info = {
static struct ep93xxfb_mach_info __initdata simone_fb_info = {
.num_modes = EP93XXFB_USE_MODEDB,
.bpp = 16,
.flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
};
static struct i2c_gpio_platform_data simone_i2c_gpio_data = {
static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
.sda_is_open_drain = 0,
.scl_pin = EP93XX_GPIO_LINE_EECLK,
......
......@@ -125,11 +125,11 @@ static struct platform_device snappercl15_nand_device = {
.num_resources = ARRAY_SIZE(snappercl15_nand_resource),
};
static struct ep93xx_eth_data snappercl15_eth_data = {
static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
.phy_id = 1,
};
static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = {
static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = {
.sda_pin = EP93XX_GPIO_LINE_EEDAT,
.sda_is_open_drain = 0,
.scl_pin = EP93XX_GPIO_LINE_EECLK,
......@@ -145,7 +145,7 @@ static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
},
};
static struct ep93xxfb_mach_info snappercl15_fb_info = {
static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
.num_modes = EP93XXFB_USE_MODEDB,
.bpp = 16,
};
......
......@@ -186,7 +186,7 @@ static struct platform_device ts72xx_wdt_device = {
.resource = ts72xx_wdt_resources,
};
static struct ep93xx_eth_data ts72xx_eth_data = {
static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
.phy_id = 1,
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册