提交 b361da83 编写于 作者: K Karicheri, Muralidharan 提交者: David S. Miller

net: netcp: ale: add proper ale entry mask bits for netcp switch ALE

For NetCP NU Switch ALE, some of the mask bits are different than
defaults used in the driver. Add a new macro DEFINE_ALE_FIELD1 that use
a configurable mask bits and use it in the driver. These bits are set to
correct values by using the new variables added to cpsw_ale structure
and re-used in the macros. The parameter nu_switch_ale is configured by
the caller driver to indicate the ALE is for that switch and is used in
the ALE driver to do customization as needed.
Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 7938a0d7
......@@ -29,6 +29,7 @@
#define ALE_VERSION_MAJOR(rev, mask) (((rev) >> 8) & (mask))
#define ALE_VERSION_MINOR(rev) (rev & 0xff)
#define ALE_VERSION_1R3 0x0103
#define ALE_VERSION_1R4 0x0104
/* ALE Registers */
......@@ -46,6 +47,7 @@
#define ALE_UNKNOWNVLAN_UNREG_MCAST_FLOOD 0x94
#define ALE_UNKNOWNVLAN_REG_MCAST_FLOOD 0x98
#define ALE_UNKNOWNVLAN_FORCE_UNTAG_EGRESS 0x9C
#define ALE_VLAN_MASK_MUX(reg) (0xc0 + (0x4 * (reg)))
#define ALE_TABLE_WRITE BIT(31)
......@@ -96,20 +98,34 @@ static inline void cpsw_ale_set_##name(u32 *ale_entry, u32 value) \
cpsw_ale_set_field(ale_entry, start, bits, value); \
}
#define DEFINE_ALE_FIELD1(name, start) \
static inline int cpsw_ale_get_##name(u32 *ale_entry, u32 bits) \
{ \
return cpsw_ale_get_field(ale_entry, start, bits); \
} \
static inline void cpsw_ale_set_##name(u32 *ale_entry, u32 value, \
u32 bits) \
{ \
cpsw_ale_set_field(ale_entry, start, bits, value); \
}
DEFINE_ALE_FIELD(entry_type, 60, 2)
DEFINE_ALE_FIELD(vlan_id, 48, 12)
DEFINE_ALE_FIELD(mcast_state, 62, 2)
DEFINE_ALE_FIELD(port_mask, 66, 3)
DEFINE_ALE_FIELD1(port_mask, 66)
DEFINE_ALE_FIELD(super, 65, 1)
DEFINE_ALE_FIELD(ucast_type, 62, 2)
DEFINE_ALE_FIELD(port_num, 66, 2)
DEFINE_ALE_FIELD1(port_num, 66)
DEFINE_ALE_FIELD(blocked, 65, 1)
DEFINE_ALE_FIELD(secure, 64, 1)
DEFINE_ALE_FIELD(vlan_untag_force, 24, 3)
DEFINE_ALE_FIELD(vlan_reg_mcast, 16, 3)
DEFINE_ALE_FIELD(vlan_unreg_mcast, 8, 3)
DEFINE_ALE_FIELD(vlan_member_list, 0, 3)
DEFINE_ALE_FIELD1(vlan_untag_force, 24)
DEFINE_ALE_FIELD1(vlan_reg_mcast, 16)
DEFINE_ALE_FIELD1(vlan_unreg_mcast, 8)
DEFINE_ALE_FIELD1(vlan_member_list, 0)
DEFINE_ALE_FIELD(mcast, 40, 1)
/* ALE NetCP nu switch specific */
DEFINE_ALE_FIELD(vlan_unreg_mcast_idx, 20, 3)
DEFINE_ALE_FIELD(vlan_reg_mcast_idx, 44, 3)
/* The MAC address field in the ALE entry cannot be macroized as above */
static inline void cpsw_ale_get_addr(u32 *ale_entry, u8 *addr)
......@@ -235,14 +251,16 @@ static void cpsw_ale_flush_mcast(struct cpsw_ale *ale, u32 *ale_entry,
{
int mask;
mask = cpsw_ale_get_port_mask(ale_entry);
mask = cpsw_ale_get_port_mask(ale_entry,
ale->port_mask_bits);
if ((mask & port_mask) == 0)
return; /* ports dont intersect, not interested */
mask &= ~port_mask;
/* free if only remaining port is host port */
if (mask)
cpsw_ale_set_port_mask(ale_entry, mask);
cpsw_ale_set_port_mask(ale_entry, mask,
ale->port_mask_bits);
else
cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_FREE);
}
......@@ -303,7 +321,7 @@ int cpsw_ale_add_ucast(struct cpsw_ale *ale, u8 *addr, int port,
cpsw_ale_set_ucast_type(ale_entry, ALE_UCAST_PERSISTANT);
cpsw_ale_set_secure(ale_entry, (flags & ALE_SECURE) ? 1 : 0);
cpsw_ale_set_blocked(ale_entry, (flags & ALE_BLOCKED) ? 1 : 0);
cpsw_ale_set_port_num(ale_entry, port);
cpsw_ale_set_port_num(ale_entry, port, ale->port_num_bits);
idx = cpsw_ale_match_addr(ale, addr, (flags & ALE_VLAN) ? vid : 0);
if (idx < 0)
......@@ -350,9 +368,11 @@ int cpsw_ale_add_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask,
cpsw_ale_set_super(ale_entry, (flags & ALE_BLOCKED) ? 1 : 0);
cpsw_ale_set_mcast_state(ale_entry, mcast_state);
mask = cpsw_ale_get_port_mask(ale_entry);
mask = cpsw_ale_get_port_mask(ale_entry,
ale->port_mask_bits);
port_mask |= mask;
cpsw_ale_set_port_mask(ale_entry, port_mask);
cpsw_ale_set_port_mask(ale_entry, port_mask,
ale->port_mask_bits);
if (idx < 0)
idx = cpsw_ale_match_free(ale);
......@@ -379,7 +399,8 @@ int cpsw_ale_del_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask,
cpsw_ale_read(ale, idx, ale_entry);
if (port_mask)
cpsw_ale_set_port_mask(ale_entry, port_mask);
cpsw_ale_set_port_mask(ale_entry, port_mask,
ale->port_mask_bits);
else
cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_FREE);
......@@ -388,6 +409,21 @@ int cpsw_ale_del_mcast(struct cpsw_ale *ale, u8 *addr, int port_mask,
}
EXPORT_SYMBOL_GPL(cpsw_ale_del_mcast);
/* ALE NetCP NU switch specific vlan functions */
static void cpsw_ale_set_vlan_mcast(struct cpsw_ale *ale, u32 *ale_entry,
int reg_mcast, int unreg_mcast)
{
int idx;
/* Set VLAN registered multicast flood mask */
idx = cpsw_ale_get_vlan_reg_mcast_idx(ale_entry);
writel(reg_mcast, ale->params.ale_regs + ALE_VLAN_MASK_MUX(idx));
/* Set VLAN unregistered multicast flood mask */
idx = cpsw_ale_get_vlan_unreg_mcast_idx(ale_entry);
writel(unreg_mcast, ale->params.ale_regs + ALE_VLAN_MASK_MUX(idx));
}
int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag,
int reg_mcast, int unreg_mcast)
{
......@@ -401,10 +437,16 @@ int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag,
cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_VLAN);
cpsw_ale_set_vlan_id(ale_entry, vid);
cpsw_ale_set_vlan_untag_force(ale_entry, untag);
cpsw_ale_set_vlan_reg_mcast(ale_entry, reg_mcast);
cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast);
cpsw_ale_set_vlan_member_list(ale_entry, port);
cpsw_ale_set_vlan_untag_force(ale_entry, untag, ale->vlan_field_bits);
if (!ale->params.nu_switch_ale) {
cpsw_ale_set_vlan_reg_mcast(ale_entry, reg_mcast,
ale->vlan_field_bits);
cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast,
ale->vlan_field_bits);
} else {
cpsw_ale_set_vlan_mcast(ale, ale_entry, reg_mcast, unreg_mcast);
}
cpsw_ale_set_vlan_member_list(ale_entry, port, ale->vlan_field_bits);
if (idx < 0)
idx = cpsw_ale_match_free(ale);
......@@ -430,7 +472,8 @@ int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port_mask)
cpsw_ale_read(ale, idx, ale_entry);
if (port_mask)
cpsw_ale_set_vlan_member_list(ale_entry, port_mask);
cpsw_ale_set_vlan_member_list(ale_entry, port_mask,
ale->vlan_field_bits);
else
cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_FREE);
......@@ -458,12 +501,15 @@ void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti)
if (type != ALE_TYPE_VLAN)
continue;
unreg_mcast = cpsw_ale_get_vlan_unreg_mcast(ale_entry);
unreg_mcast =
cpsw_ale_get_vlan_unreg_mcast(ale_entry,
ale->vlan_field_bits);
if (allmulti)
unreg_mcast |= 1;
else
unreg_mcast &= ~1;
cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast);
cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast,
ale->vlan_field_bits);
cpsw_ale_write(ale, idx, ale_entry);
}
}
......@@ -769,6 +815,14 @@ void cpsw_ale_start(struct cpsw_ale *ale)
dev_info(ale->params.dev,
"ALE Table size %ld\n", ale->params.ale_entries);
/* set default bits for existing h/w */
ale->port_mask_bits = 3;
ale->port_num_bits = 2;
ale->vlan_field_bits = 3;
/* Set defaults override for ALE on NetCP NU switch and for version
* 1R3
*/
if (ale->params.nu_switch_ale) {
/* Separate registers for unknown vlan configuration.
* Also there are N bits, where N is number of ale
......@@ -793,6 +847,13 @@ void cpsw_ale_start(struct cpsw_ale *ale)
ale_controls[ALE_PORT_UNTAGGED_EGRESS].shift = 0;
ale_controls[ALE_PORT_UNTAGGED_EGRESS].offset =
ALE_UNKNOWNVLAN_FORCE_UNTAG_EGRESS;
ale->port_mask_bits = ale->params.ale_ports;
ale->port_num_bits = ale->params.ale_ports - 1;
ale->vlan_field_bits = ale->params.ale_ports;
} else if (ale->version == ALE_VERSION_1R3) {
ale->port_mask_bits = ale->params.ale_ports;
ale->port_num_bits = 3;
ale->vlan_field_bits = ale->params.ale_ports;
}
cpsw_ale_control_set(ale, 0, ALE_ENABLE, 1);
......
......@@ -39,6 +39,10 @@ struct cpsw_ale {
unsigned long ageout;
int allmulti;
u32 version;
/* These bits are different on NetCP NU Switch ALE */
u32 port_mask_bits;
u32 port_num_bits;
u32 vlan_field_bits;
};
enum cpsw_ale_control {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册