提交 b2e68aa3 编写于 作者: M Maciej W. Rozycki 提交者: Jeff Garzik

[PATCH] defxx: Big-endian hosts support

 The PDQ DMA engine requires a different byte-swapping mode for big-endian
hosts; also the MAC address which is read from a register through PIO has
to be byte-swapped.  These changes have been verified with DEFPA-DC (PCI)
boards and a Broadcom BCM91250A (MIPS CPU based) host.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 c3a9392e
......@@ -192,6 +192,7 @@
* 04 Aug 2003 macro Converted to the DMA API.
* 14 Aug 2004 macro Fix device names reported.
* 14 Jun 2005 macro Use irqreturn_t.
* 23 Oct 2006 macro Big-endian host support.
*/
/* Include files */
......@@ -218,8 +219,8 @@
/* Version information string should be updated prior to each new release! */
#define DRV_NAME "defxx"
#define DRV_VERSION "v1.08"
#define DRV_RELDATE "2005/06/14"
#define DRV_VERSION "v1.09"
#define DRV_RELDATE "2006/10/23"
static char version[] __devinitdata =
DRV_NAME ": " DRV_VERSION " " DRV_RELDATE
......@@ -859,6 +860,7 @@ static int __devinit dfx_driver_init(struct net_device *dev,
print_name);
return(DFX_K_FAILURE);
}
data = cpu_to_le32(data);
memcpy(&bp->factory_mac_addr[0], &data, sizeof(u32));
if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_MLA, PI_PDATA_A_MLA_K_HI, 0,
......@@ -867,6 +869,7 @@ static int __devinit dfx_driver_init(struct net_device *dev,
print_name);
return(DFX_K_FAILURE);
}
data = cpu_to_le32(data);
memcpy(&bp->factory_mac_addr[4], &data, sizeof(u16));
/*
......@@ -1085,27 +1088,23 @@ static int dfx_adap_init(DFX_board_t *bp, int get_buffers)
}
/*
* Set base address of Descriptor Block and bring adapter to DMA_AVAILABLE state
* Set the base address of Descriptor Block and bring adapter
* to DMA_AVAILABLE state.
*
* Note: We also set the literal and data swapping requirements in this
* command. Since this driver presently runs on Intel platforms
* which are Little Endian, we'll tell the adapter to byte swap
* data only. This code will need to change when we support
* Big Endian systems (eg. PowerPC).
* Note: We also set the literal and data swapping requirements
* in this command.
*
* Assumption: 32-bit physical address of descriptor block is 8Kbyte
* aligned. That is, bits 0-12 of the address must be zero.
* Assumption: 32-bit physical address of descriptor block
* is 8Kbyte aligned.
*/
if (dfx_hw_port_ctrl_req(bp,
PI_PCTRL_M_INIT,
(u32) (bp->descr_block_phys | PI_PDATA_A_INIT_M_BSWAP_DATA),
0,
NULL) != DFX_K_SUCCESS)
{
printk("%s: Could not set descriptor block address!\n", bp->dev->name);
return(DFX_K_FAILURE);
}
if (dfx_hw_port_ctrl_req(bp, PI_PCTRL_M_INIT,
(u32)(bp->descr_block_phys |
PI_PDATA_A_INIT_M_BSWAP_INIT),
0, NULL) != DFX_K_SUCCESS) {
printk("%s: Could not set descriptor block address!\n",
bp->dev->name);
return DFX_K_FAILURE;
}
/* Set transmit flush timeout value */
......
......@@ -25,6 +25,7 @@
* macros to DEFXX.C.
* 12-Sep-96 LVS Removed packet request header pointers.
* 04 Aug 2003 macro Converted to the DMA API.
* 23 Oct 2006 macro Big-endian host support.
*/
#ifndef _DEFXX_H_
......@@ -1344,7 +1345,7 @@ typedef struct
/* Register definition structures are defined for both big and little endian systems */
#ifndef BIG_ENDIAN
#ifndef __BIG_ENDIAN
/* Little endian format of Type 1 Producer register */
......@@ -1402,7 +1403,11 @@ typedef union
} index;
} PI_TYPE_2_CONSUMER;
#else
/* Define swapping required by DMA transfers. */
#define PI_PDATA_A_INIT_M_BSWAP_INIT \
(PI_PDATA_A_INIT_M_BSWAP_DATA)
#else /* __BIG_ENDIAN */
/* Big endian format of Type 1 Producer register */
......@@ -1460,7 +1465,11 @@ typedef union
} index;
} PI_TYPE_2_CONSUMER;
#endif /* #ifndef BIG_ENDIAN */
/* Define swapping required by DMA transfers. */
#define PI_PDATA_A_INIT_M_BSWAP_INIT \
(PI_PDATA_A_INIT_M_BSWAP_DATA | PI_PDATA_A_INIT_M_BSWAP_LITERAL)
#endif /* __BIG_ENDIAN */
/* Define EISA controller register offsets */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册