Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: rt2860sta: prevent a panic when disabling when associated
  staging: more sched.h fixes
  Staging: et131x: Fix the add_10bit macro
  Staging: et131x: Correct WRAP bit handling
  staging: Complete sched.h removal from interrupt.h
  Staging: vme: fix sched.h build breakage
  Staging: poch: fix sched.h build breakage
  Staging: b3dfg: fix sched.h build breakage
  Staging: comedi: fix sched.h build breakage
  Staging: iio: Fix missing include <linux/sched.h>

drivers/staging/b3dfg/b3dfg.c

@@ -36,6 +36,7 @@
 #include <linux/wait.h>
 #include <linux/mm.h>
 #include <linux/uaccess.h>
+#include <linux/sched.h>
 
 static unsigned int b3dfg_nbuf = 2;
 

drivers/staging/comedi/drivers/me_daq.c

@@ -51,6 +51,7 @@ from http://www.comedi.org
 */
 
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include "../comedidev.h"
 
 #include "comedi_pci.h"

drivers/staging/comedi/drivers/ni_mio_common.c

@@ -62,6 +62,7 @@
 /* #define DEBUG_STATUS_B */
 
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include "8255.h"
 #include "mite.h"
 #include "comedi_fc.h"

drivers/staging/comedi/drivers/ni_pcidio.c

@@ -70,6 +70,7 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
 /* #define DEBUG_FLAGS */
 
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include "../comedidev.h"
 
 #include "mite.h"

drivers/staging/et131x/et1310_address_map.h

@@ -223,7 +223,7 @@ typedef union _TXDMA_PR_NUM_DES_t {
 
 extern inline void add_10bit(u32 *v, int n)
 {
-	*v = INDEX10(*v + n);
+	*v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP);
 }
 
 /*

drivers/staging/et131x/et1310_rx.c

@@ -1177,12 +1177,20 @@ void et131x_handle_recv_interrupt(struct et131x_adapter *etdev)
 
 static inline u32 bump_fbr(u32 *fbr, u32 limit)
 {
-	u32 v = *fbr;
-	add_10bit(&v, 1);
-	if (v > limit)
-		v = (*fbr & ~ET_DMA10_MASK) ^ ET_DMA10_WRAP;
-	*fbr = v;
-	return v;
+        u32 v = *fbr;
+        v++;
+        /* This works for all cases where limit < 1024. The 1023 case
+           works because 1023++ is 1024 which means the if condition is not
+           taken but the carry of the bit into the wrap bit toggles the wrap
+           value correctly */
+        if ((v & ET_DMA10_MASK) > limit) {
+                v &= ~ET_DMA10_MASK;
+                v ^= ET_DMA10_WRAP;
+        }
+        /* For the 1023 case */
+        v &= (ET_DMA10_MASK|ET_DMA10_WRAP);
+        *fbr = v;
+        return v;
 }
 
 /**

drivers/staging/hv/osd.c

@@ -30,6 +30,7 @@
 #include <linux/ioport.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <linux/wait.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>

drivers/staging/iio/industrialio-core.c

@@ -18,6 +18,8 @@
 #include <linux/fs.h>
 #include <linux/interrupt.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
 #include <linux/cdev.h>
 #include "iio.h"
 #include "trigger_consumer.h"

drivers/staging/poch/poch.c

@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/ioctl.h>
 #include <linux/io.h>
+#include <linux/sched.h>
 
 #include "poch.h"
 

drivers/staging/rt2860/common/cmm_data_2860.c

@@ -363,6 +363,8 @@ int RtmpPCIMgmtKickOut(
 	ULONG			SwIdx = pAd->MgmtRing.TxCpuIdx;
 
 	pTxD  = (PTXD_STRUC) pAd->MgmtRing.Cell[SwIdx].AllocVa;
+	if (!pTxD)
+		return 0;
 
 	pAd->MgmtRing.Cell[SwIdx].pNdisPacket = pPacket;
 	pAd->MgmtRing.Cell[SwIdx].pNextNdisPacket = NULL;

drivers/staging/rt2860/common/cmm_info.c

@@ -25,6 +25,7 @@
  *************************************************************************
 */
 
+#include <linux/sched.h>
 #include "../rt_config.h"
 
 INT	Show_SSID_Proc(

drivers/staging/rt2860/rt_linux.c

@@ -25,6 +25,7 @@
  *************************************************************************
  */
 
+#include <linux/sched.h>
 #include "rt_config.h"
 
 ULONG	RTDebugLevel = RT_DEBUG_ERROR;

drivers/staging/rt3090/common/cmm_info.c

@@ -34,6 +34,7 @@
     ---------    ----------    ----------------------------------------------
  */
 
+#include <linux/sched.h>
 #include "../rt_config.h"
 
 

drivers/staging/rt3090/rt_linux.c

@@ -25,6 +25,7 @@
  *************************************************************************
  */
 
+#include <linux/sched.h>
 #include "rt_config.h"
 
 ULONG	RTDebugLevel = RT_DEBUG_ERROR;

drivers/staging/sep/sep_driver.c

@@ -38,6 +38,7 @@
 #include <linux/mm.h>
 #include <linux/poll.h>
 #include <linux/wait.h>
+#include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/firmware.h>
 #include <asm/ioctl.h>

drivers/staging/vme/bridges/vme_ca91cx42.c

@@ -25,6 +25,7 @@
 #include <linux/poll.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/sched.h>
 #include <asm/time.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>

drivers/staging/vme/bridges/vme_tsi148.c

@@ -25,6 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/sched.h>
 #include <asm/time.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>