提交 b194b120 编写于 作者: C Cliff Wickman 提交者: Ingo Molnar

SGI UV: TLB shootdown using broadcast assist unit, cleanups

TLB shootdown for SGI UV.

v1: 6/2 original
v2: 6/3 corrections/improvements per Ingo's review
v3: 6/4 split atomic operations off to a separate patch (Jeremy's review)
v4: 6/12 include <mach_apic.h> rather than <asm/mach-bigsmp/mach_apic.h>
         (fixes a !SMP build problem that Ingo found)
         fix the index on uv_table_bases[blade]
Signed-off-by: NCliff Wickman <cpw@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
上级 73e991f4
......@@ -165,7 +165,7 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
cpumask_t cpumask = *cpumaskp;
if (is_uv_system() && uv_flush_tlb_others(&cpumask, mm, va))
return;
return;
/* Caller has disabled preemption */
sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
......
此差异已折叠。
......@@ -14,9 +14,9 @@
#include <linux/bitmap.h>
#define BITSPERBYTE 8
/* Broadcast Assist Unit messaging structures */
/*
* Broadcast Assist Unit messaging structures
*
* Selective Broadcast activations are induced by software action
* specifying a particular 8-descriptor "set" via a 6-bit index written
* to an MMR.
......@@ -33,54 +33,73 @@
* Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
*/
#define UV_ITEMS_PER_DESCRIPTOR 8
#define UV_CPUS_PER_ACT_STATUS 32
#define UV_ACT_STATUS_MASK 0x3
#define UV_ACT_STATUS_SIZE 2
#define UV_ACTIVATION_DESCRIPTOR_SIZE 32
#define UV_DISTRIBUTION_SIZE 256
#define UV_SW_ACK_NPENDING 8
#define UV_BAU_MESSAGE 200 /* Messaging irq; see irq_64.h */
/* and include/asm-x86/hw_irq_64.h */
/* To be dynamically allocated in the future */
#define UV_NET_ENDPOINT_INTD 0x38
#define UV_DESC_BASE_PNODE_SHIFT 49 /* position of pnode (nasid>>1) in MMR */
#define UV_PAYLOADQ_PNODE_SHIFT 49
#define UV_PTC_BASENAME "sgi_uv/ptc_statistics"
#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask))
/* bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1 */
#define UV_ITEMS_PER_DESCRIPTOR 8
#define UV_CPUS_PER_ACT_STATUS 32
#define UV_ACT_STATUS_MASK 0x3
#define UV_ACT_STATUS_SIZE 2
#define UV_ACTIVATION_DESCRIPTOR_SIZE 32
#define UV_DISTRIBUTION_SIZE 256
#define UV_SW_ACK_NPENDING 8
#define UV_BAU_MESSAGE 200
/*
* Messaging irq; see irq_64.h and include/asm-x86/hw_irq_64.h
* To be dynamically allocated in the future
*/
#define UV_NET_ENDPOINT_INTD 0x38
#define UV_DESC_BASE_PNODE_SHIFT 49
#define UV_PAYLOADQ_PNODE_SHIFT 49
#define UV_PTC_BASENAME "sgi_uv/ptc_statistics"
#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask))
/*
* bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
*/
#define DESC_STATUS_IDLE 0
#define DESC_STATUS_ACTIVE 1
#define DESC_STATUS_DESTINATION_TIMEOUT 2
#define DESC_STATUS_SOURCE_TIMEOUT 3
/* source side threshholds at which message retries print a warning */
/*
* source side threshholds at which message retries print a warning
*/
#define SOURCE_TIMEOUT_LIMIT 20
#define DESTINATION_TIMEOUT_LIMIT 20
/* number of entries in the destination side payload queue */
/*
* number of entries in the destination side payload queue
*/
#define DESTINATION_PAYLOAD_QUEUE_SIZE 17
/* number of destination side software ack resources */
/*
* number of destination side software ack resources
*/
#define DESTINATION_NUM_RESOURCES 8
#define MAX_CPUS_PER_NODE 32
/*
* completion statuses for sending a TLB flush message
*/
#define FLUSH_RETRY 1
#define FLUSH_GIVEUP 2
#define FLUSH_COMPLETE 3
/* Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor) */
/* If the 'multilevel' flag in the header portion of the descriptor
/*
* Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
* If the 'multilevel' flag in the header portion of the descriptor
* has been set to 0, then endpoint multi-unicast mode is selected.
* The distribution specification (32 bytes) is interpreted as a 256-bit
* distribution vector. Adjacent bits correspond to consecutive even numbered
* nodeIDs. The result of adding the index of a given bit to the 15-bit
* 'base_dest_nodeid' field of the header corresponds to the
* destination nodeID associated with that specified bit. */
* destination nodeID associated with that specified bit.
*/
struct bau_target_nodemask {
unsigned long bits[BITS_TO_LONGS(256)];
};
/* mask of cpu's on a node */
/* (during initialization we need to check that unsigned long has
enough bits for max. cpu's per node) */
/*
* mask of cpu's on a node
* (during initialization we need to check that unsigned long has
* enough bits for max. cpu's per node)
*/
struct bau_local_cpumask {
unsigned long bits;
};
......@@ -99,7 +118,9 @@ struct bau_local_cpumask {
* the s/w ack bit vector ]
*/
/* The payload is software-defined for INTD transactions */
/*
* The payload is software-defined for INTD transactions
*/
struct bau_msg_payload {
unsigned long address; /* signifies a page or all TLB's
of the cpu */
......@@ -112,8 +133,10 @@ struct bau_msg_payload {
};
/* Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor) */
/* see table 4.2.3.0.1 in broacast_assist spec. */
/*
* Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
* see table 4.2.3.0.1 in broacast_assist spec.
*/
struct bau_msg_header {
int dest_subnodeid:6; /* must be zero */
/* bits 5:0 */
......@@ -173,11 +196,15 @@ struct bau_msg_header {
/* bits 127:107 */
};
/* The format of the message to send, plus all accompanying control */
/* Should be 64 bytes */
/*
* The format of the message to send, plus all accompanying control
* Should be 64 bytes
*/
struct bau_activation_descriptor {
struct bau_target_nodemask distribution;
/* message template, consisting of header and payload: */
/*
* message template, consisting of header and payload:
*/
struct bau_msg_header header;
struct bau_msg_payload payload;
};
......@@ -235,18 +262,24 @@ struct bau_payload_queue_entry {
/* bytes 24-31 */
};
/* one for every slot in the destination payload queue */
/*
* one for every slot in the destination payload queue
*/
struct bau_msg_status {
struct bau_local_cpumask seen_by; /* map of cpu's */
};
/* one for every slot in the destination software ack resources */
/*
* one for every slot in the destination software ack resources
*/
struct bau_sw_ack_status {
struct bau_payload_queue_entry *msg; /* associated message */
int watcher; /* cpu monitoring, or -1 */
};
/* one on every node and per-cpu; to locate the software tables */
/*
* one on every node and per-cpu; to locate the software tables
*/
struct bau_control {
struct bau_activation_descriptor *descriptor_base;
struct bau_payload_queue_entry *bau_msg_head;
......@@ -267,8 +300,8 @@ struct ptc_stats {
unsigned long onetlb; /* times just one tlb on this cpu was flushed */
unsigned long s_retry; /* retries on source side timeouts */
unsigned long d_retry; /* retries on destination side timeouts */
unsigned long sflush_ns;/* nanoseconds spent in uv_flush_tlb_others */
unsigned long dflush_ns;/* nanoseconds spent destination side */
unsigned long sflush; /* cycles spent in uv_flush_tlb_others */
unsigned long dflush; /* cycles spent on destination side */
unsigned long retriesok; /* successes on retries */
unsigned long nomsg; /* interrupts with no message */
unsigned long multmsg; /* interrupts with multiple messages */
......@@ -293,39 +326,11 @@ static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
bitmap_zero(&dstp->bits, nbits);
}
/*
* atomic increment of a short integer
* (rather than using the __sync_add_and_fetch() intrinsic)
*
* returns the new value of the variable
*/
static inline short int atomic_inc_short(short int *v)
{
asm volatile("movw $1, %%cx\n"
"lock ; xaddw %%cx, %0\n"
: "+m" (*v) /* outputs */
: : "%cx", "memory"); /* inputs : clobbereds */
return *v;
}
/*
* atomic OR of two long integers
* (rather than using the __sync_or_and_fetch() intrinsic)
*/
static inline void atomic_or_long(unsigned long *v1, unsigned long v2)
{
asm volatile("movq %0, %%rax; lea %1, %%rdx\n"
"lock ; orq %%rax, %%rdx\n"
: "+m" (*v1) /* outputs */
: "m" (v1), "m" (v2) /* inputs */
: "memory"); /* clobbereds */
}
#define cpubit_isset(cpu, bau_local_cpumask) \
test_bit((cpu), (bau_local_cpumask).bits)
int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long);
void uv_bau_message_intr1(void);
void uv_bau_timeout_intr1(void);
extern int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long);
extern void uv_bau_message_intr1(void);
extern void uv_bau_timeout_intr1(void);
#endif /* __ASM_X86_UV_BAU__ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册