pinctrl: bcm: consolidate Broadcom pinctrl drivers

Consolidate Broadcom pinctrl drivers into drivers/pinctrl/bcm/*
Signed-off-by: NRay Jui <rjui@broadcom.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/Kconfig

@@ -67,24 +67,6 @@ config PINCTRL_AT91
 	help
 	  Say Y here to enable the at91 pinctrl driver
 
-config PINCTRL_BCM2835
-	bool
-	select PINMUX
-	select PINCONF
-
-config PINCTRL_BCM281XX
-	bool "Broadcom BCM281xx pinctrl driver"
-	depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
-	select PINMUX
-	select PINCONF
-	select GENERIC_PINCONF
-	select REGMAP_MMIO
-	help
-	  Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
-	  for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
-	  BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
-	  framework.  GPIO is provided by a separate GPIO driver.
-
 config PINCTRL_LANTIQ
 	bool
 	depends on LANTIQ
@@ -211,6 +193,7 @@ config PINCTRL_ZYNQ
 	help
 	  This selectes the pinctrl driver for Xilinx Zynq.
 
+source "drivers/pinctrl/bcm/Kconfig"
 source "drivers/pinctrl/berlin/Kconfig"
 source "drivers/pinctrl/freescale/Kconfig"
 source "drivers/pinctrl/intel/Kconfig"

drivers/pinctrl/Makefile

@@ -14,8 +14,6 @@ obj-$(CONFIG_PINCTRL_AS3722)	+= pinctrl-as3722.o
 obj-$(CONFIG_PINCTRL_BF54x)	+= pinctrl-adi2-bf54x.o
 obj-$(CONFIG_PINCTRL_BF60x)	+= pinctrl-adi2-bf60x.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
-obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
-obj-$(CONFIG_PINCTRL_BCM281XX)	+= pinctrl-bcm281xx.o
 obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
 obj-$(CONFIG_PINCTRL_MESON)	+= meson/
 obj-$(CONFIG_PINCTRL_PALMAS)	+= pinctrl-palmas.o
@@ -39,6 +37,7 @@ obj-$(CONFIG_PINCTRL_TB10X)	+= pinctrl-tb10x.o
 obj-$(CONFIG_PINCTRL_ST) 	+= pinctrl-st.o
 obj-$(CONFIG_PINCTRL_ZYNQ)	+= pinctrl-zynq.o
 
+obj-$(CONFIG_ARCH_BCM)		+= bcm/
 obj-$(CONFIG_ARCH_BERLIN)	+= berlin/
 obj-y				+= freescale/
 obj-$(CONFIG_X86)		+= intel/

drivers/pinctrl/bcm/Kconfig

+#
+# Broadcom pinctrl drivers
+#
+
+config PINCTRL_BCM281XX
+	bool "Broadcom BCM281xx pinctrl driver"
+	depends on OF && (ARCH_BCM_MOBILE || COMPILE_TEST)
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select REGMAP_MMIO
+	help
+	  Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
+	  for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
+	  BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
+	  framework.  GPIO is provided by a separate GPIO driver.
+
+config PINCTRL_BCM2835
+	bool
+	select PINMUX
+	select PINCONF

drivers/pinctrl/bcm/Makefile

+# Broadcom pinctrl support
+
+obj-$(CONFIG_PINCTRL_BCM281XX)	+= pinctrl-bcm281xx.o
+obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o

drivers/pinctrl/pinctrl-bcm281xx.c → drivers/pinctrl/bcm/pinctrl-bcm281xx.c

@@ -21,8 +21,8 @@
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
-#include "core.h"
-#include "pinctrl-utils.h"
+#include "../core.h"
+#include "../pinctrl-utils.h"
 
 /* BCM281XX Pin Control Registers Definitions */