提交 b0d04fb5 编写于 作者: G Greg Kroah-Hartman

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Ingo writes:
  "x86 fixes:

   It's 4 misc fixes, 3 build warning fixes and 3 comment fixes.

   In hindsight I'd have left out the 3 comment fixes to make the pull
   request look less scary at such a late point in the cycle. :-/"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/swiotlb: Enable swiotlb for > 4GiG RAM on 32-bit kernels
  x86/fpu: Fix i486 + no387 boot crash by only saving FPU registers on context switch if there is an FPU
  x86/fpu: Remove second definition of fpu in __fpu__restore_sig()
  x86/entry/64: Further improve paranoid_entry comments
  x86/entry/32: Clear the CS high bits
  x86/boot: Add -Wno-pointer-sign to KBUILD_CFLAGS
  x86/time: Correct the attribute on jiffies' definition
  x86/entry: Add some paranoid entry/exit CR3 handling comments
  x86/percpu: Fix this_cpu_read()
  x86/tsc: Force inlining of cyc2ns bits
......@@ -37,6 +37,7 @@ KBUILD_CFLAGS += $(call cc-option,-ffreestanding)
KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
KBUILD_CFLAGS += -Wno-pointer-sign
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
GCOV_PROFILE := n
......
......@@ -389,6 +389,13 @@
* that register for the time this macro runs
*/
/*
* The high bits of the CS dword (__csh) are used for
* CS_FROM_ENTRY_STACK and CS_FROM_USER_CR3. Clear them in case
* hardware didn't do this for us.
*/
andl $(0x0000ffff), PT_CS(%esp)
/* Are we on the entry stack? Bail out if not! */
movl PER_CPU_VAR(cpu_entry_area), %ecx
addl $CPU_ENTRY_AREA_entry_stack + SIZEOF_entry_stack, %ecx
......@@ -407,12 +414,6 @@
/* Load top of task-stack into %edi */
movl TSS_entry2task_stack(%edi), %edi
/*
* Clear unused upper bits of the dword containing the word-sized CS
* slot in pt_regs in case hardware didn't clear it for us.
*/
andl $(0x0000ffff), PT_CS(%esp)
/* Special case - entry from kernel mode via entry stack */
#ifdef CONFIG_VM86
movl PT_EFLAGS(%esp), %ecx # mix EFLAGS and CS
......
......@@ -1187,6 +1187,16 @@ ENTRY(paranoid_entry)
xorl %ebx, %ebx
1:
/*
* Always stash CR3 in %r14. This value will be restored,
* verbatim, at exit. Needed if paranoid_entry interrupted
* another entry that already switched to the user CR3 value
* but has not yet returned to userspace.
*
* This is also why CS (stashed in the "iret frame" by the
* hardware at entry) can not be used: this may be a return
* to kernel code, but with a user CR3 value.
*/
SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14
ret
......@@ -1211,11 +1221,13 @@ ENTRY(paranoid_exit)
testl %ebx, %ebx /* swapgs needed? */
jnz .Lparanoid_exit_no_swapgs
TRACE_IRQS_IRETQ
/* Always restore stashed CR3 value (see paranoid_entry) */
RESTORE_CR3 scratch_reg=%rbx save_reg=%r14
SWAPGS_UNSAFE_STACK
jmp .Lparanoid_exit_restore
.Lparanoid_exit_no_swapgs:
TRACE_IRQS_IRETQ_DEBUG
/* Always restore stashed CR3 value (see paranoid_entry) */
RESTORE_CR3 scratch_reg=%rbx save_reg=%r14
.Lparanoid_exit_restore:
jmp restore_regs_and_return_to_kernel
......@@ -1626,6 +1638,7 @@ end_repeat_nmi:
movq $-1, %rsi
call do_nmi
/* Always restore stashed CR3 value (see paranoid_entry) */
RESTORE_CR3 scratch_reg=%r15 save_reg=%r14
testl %ebx, %ebx /* swapgs needed? */
......
......@@ -528,7 +528,7 @@ static inline void fpregs_activate(struct fpu *fpu)
static inline void
switch_fpu_prepare(struct fpu *old_fpu, int cpu)
{
if (old_fpu->initialized) {
if (static_cpu_has(X86_FEATURE_FPU) && old_fpu->initialized) {
if (!copy_fpregs_to_fpstate(old_fpu))
old_fpu->last_cpu = -1;
else
......
......@@ -185,22 +185,22 @@ do { \
typeof(var) pfo_ret__; \
switch (sizeof(var)) { \
case 1: \
asm(op "b "__percpu_arg(1)",%0" \
asm volatile(op "b "__percpu_arg(1)",%0"\
: "=q" (pfo_ret__) \
: "m" (var)); \
break; \
case 2: \
asm(op "w "__percpu_arg(1)",%0" \
asm volatile(op "w "__percpu_arg(1)",%0"\
: "=r" (pfo_ret__) \
: "m" (var)); \
break; \
case 4: \
asm(op "l "__percpu_arg(1)",%0" \
asm volatile(op "l "__percpu_arg(1)",%0"\
: "=r" (pfo_ret__) \
: "m" (var)); \
break; \
case 8: \
asm(op "q "__percpu_arg(1)",%0" \
asm volatile(op "q "__percpu_arg(1)",%0"\
: "=r" (pfo_ret__) \
: "m" (var)); \
break; \
......
......@@ -314,7 +314,6 @@ static int __fpu__restore_sig(void __user *buf, void __user *buf_fx, int size)
* thread's fpu state, reconstruct fxstate from the fsave
* header. Validate and sanitize the copied state.
*/
struct fpu *fpu = &tsk->thread.fpu;
struct user_i387_ia32_struct env;
int err = 0;
......
......@@ -42,10 +42,8 @@ IOMMU_INIT_FINISH(pci_swiotlb_detect_override,
int __init pci_swiotlb_detect_4gb(void)
{
/* don't initialize swiotlb if iommu=off (no_iommu=1) */
#ifdef CONFIG_X86_64
if (!no_iommu && max_possible_pfn > MAX_DMA32_PFN)
swiotlb = 1;
#endif
/*
* If SME is active then swiotlb will be set to 1 so that bounce
......
......@@ -25,7 +25,7 @@
#include <asm/time.h>
#ifdef CONFIG_X86_64
__visible volatile unsigned long jiffies __cacheline_aligned = INITIAL_JIFFIES;
__visible volatile unsigned long jiffies __cacheline_aligned_in_smp = INITIAL_JIFFIES;
#endif
unsigned long profile_pc(struct pt_regs *regs)
......
......@@ -58,7 +58,7 @@ struct cyc2ns {
static DEFINE_PER_CPU_ALIGNED(struct cyc2ns, cyc2ns);
void cyc2ns_read_begin(struct cyc2ns_data *data)
void __always_inline cyc2ns_read_begin(struct cyc2ns_data *data)
{
int seq, idx;
......@@ -75,7 +75,7 @@ void cyc2ns_read_begin(struct cyc2ns_data *data)
} while (unlikely(seq != this_cpu_read(cyc2ns.seq.sequence)));
}
void cyc2ns_read_end(void)
void __always_inline cyc2ns_read_end(void)
{
preempt_enable_notrace();
}
......@@ -104,7 +104,7 @@ void cyc2ns_read_end(void)
* -johnstul@us.ibm.com "math is hard, lets go shopping!"
*/
static inline unsigned long long cycles_2_ns(unsigned long long cyc)
static __always_inline unsigned long long cycles_2_ns(unsigned long long cyc)
{
struct cyc2ns_data data;
unsigned long long ns;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册