提交 b0caa133 编写于 作者: D Dave Airlie

Merge tag 'imx-drm-next-2018-01-02' of git://git.pengutronix.de/git/pza/linux into drm-next

drm/imx: format modifier support

- Add tiled prefetch support to PRE
- Add format modifier support to PRG and imx-drm-core
- Use runtime PM to control PRG clock
- Allow building ipu-v3 under COMPILE_TEST

* tag 'imx-drm-next-2018-01-02' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-v3: allow to build with COMPILE_TEST
  drm/imx: advertise supported plane format modifiers
  drm/imx: add FB modifier support
  gpu: ipu-v3: prg: add modifier support
  gpu: ipu-v3: pre: add tiled prefetch support
  gpu: ipu-v3: prg: switch to runtime PM
......@@ -257,6 +257,7 @@ static int imx_drm_bind(struct device *dev)
drm->mode_config.max_height = 4096;
drm->mode_config.funcs = &imx_drm_mode_config_funcs;
drm->mode_config.helper_private = &imx_drm_mode_config_helpers;
drm->mode_config.allow_fb_modifiers = true;
drm_mode_config_init(drm);
......
......@@ -77,6 +77,18 @@ static const uint32_t ipu_plane_formats[] = {
DRM_FORMAT_BGRX8888_A8,
};
static const uint64_t ipu_format_modifiers[] = {
DRM_FORMAT_MOD_LINEAR,
DRM_FORMAT_MOD_INVALID
};
static const uint64_t pre_format_modifiers[] = {
DRM_FORMAT_MOD_LINEAR,
DRM_FORMAT_MOD_VIVANTE_TILED,
DRM_FORMAT_MOD_VIVANTE_SUPER_TILED,
DRM_FORMAT_MOD_INVALID
};
int ipu_plane_irq(struct ipu_plane *ipu_plane)
{
return ipu_idmac_channel_irq(ipu_plane->ipu, ipu_plane->ipu_ch,
......@@ -303,6 +315,22 @@ void ipu_plane_destroy_state(struct drm_plane *plane,
kfree(ipu_state);
}
static bool ipu_plane_format_mod_supported(struct drm_plane *plane,
uint32_t format, uint64_t modifier)
{
struct ipu_soc *ipu = to_ipu_plane(plane)->ipu;
/* linear is supported for all planes and formats */
if (modifier == DRM_FORMAT_MOD_LINEAR)
return true;
/* without a PRG there are no supported modifiers */
if (!ipu_prg_present(ipu))
return false;
return ipu_prg_format_supported(ipu, format, modifier);
}
static const struct drm_plane_funcs ipu_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
......@@ -310,6 +338,7 @@ static const struct drm_plane_funcs ipu_plane_funcs = {
.reset = ipu_plane_state_reset,
.atomic_duplicate_state = ipu_plane_duplicate_state,
.atomic_destroy_state = ipu_plane_destroy_state,
.format_mod_supported = ipu_plane_format_mod_supported,
};
static int ipu_plane_atomic_check(struct drm_plane *plane,
......@@ -550,8 +579,8 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
ipu_prg_channel_configure(ipu_plane->ipu_ch, axi_id,
drm_rect_width(&state->src) >> 16,
drm_rect_height(&state->src) >> 16,
fb->pitches[0],
fb->format->format, &eba);
fb->pitches[0], fb->format->format,
fb->modifier, &eba);
}
if (old_state->fb && !drm_atomic_crtc_needs_modeset(crtc_state)) {
......@@ -700,18 +729,71 @@ static const struct drm_plane_helper_funcs ipu_plane_helper_funcs = {
int ipu_planes_assign_pre(struct drm_device *dev,
struct drm_atomic_state *state)
{
struct drm_crtc_state *old_crtc_state, *crtc_state;
struct drm_plane_state *plane_state;
struct ipu_plane_state *ipu_state;
struct ipu_plane *ipu_plane;
struct drm_plane *plane;
struct drm_crtc *crtc;
int available_pres = ipu_prg_max_active_channels();
int i;
int ret, i;
for_each_oldnew_crtc_in_state(state, crtc, old_crtc_state, crtc_state, i) {
ret = drm_atomic_add_affected_planes(state, crtc);
if (ret)
return ret;
}
/*
* We are going over the planes in 2 passes: first we assign PREs to
* planes with a tiling modifier, which need the PREs to resolve into
* linear. Any failure to assign a PRE there is fatal. In the second
* pass we try to assign PREs to linear FBs, to improve memory access
* patterns for them. Failure at this point is non-fatal, as we can
* scan out linear FBs without a PRE.
*/
for_each_new_plane_in_state(state, plane, plane_state, i) {
struct ipu_plane_state *ipu_state =
to_ipu_plane_state(plane_state);
struct ipu_plane *ipu_plane = to_ipu_plane(plane);
ipu_state = to_ipu_plane_state(plane_state);
ipu_plane = to_ipu_plane(plane);
if (!plane_state->fb) {
ipu_state->use_pre = false;
continue;
}
if (!(plane_state->fb->flags & DRM_MODE_FB_MODIFIERS) ||
plane_state->fb->modifier == DRM_FORMAT_MOD_LINEAR)
continue;
if (!ipu_prg_present(ipu_plane->ipu) || !available_pres)
return -EINVAL;
if (!ipu_prg_format_supported(ipu_plane->ipu,
plane_state->fb->format->format,
plane_state->fb->modifier))
return -EINVAL;
ipu_state->use_pre = true;
available_pres--;
}
for_each_new_plane_in_state(state, plane, plane_state, i) {
ipu_state = to_ipu_plane_state(plane_state);
ipu_plane = to_ipu_plane(plane);
if (!plane_state->fb) {
ipu_state->use_pre = false;
continue;
}
if ((plane_state->fb->flags & DRM_MODE_FB_MODIFIERS) &&
plane_state->fb->modifier != DRM_FORMAT_MOD_LINEAR)
continue;
/* make sure that modifier is initialized */
plane_state->fb->modifier = DRM_FORMAT_MOD_LINEAR;
if (ipu_prg_present(ipu_plane->ipu) && available_pres &&
plane_state->fb &&
ipu_prg_format_supported(ipu_plane->ipu,
plane_state->fb->format->format,
plane_state->fb->modifier)) {
......@@ -731,6 +813,7 @@ struct ipu_plane *ipu_plane_init(struct drm_device *dev, struct ipu_soc *ipu,
enum drm_plane_type type)
{
struct ipu_plane *ipu_plane;
const uint64_t *modifiers = ipu_format_modifiers;
int ret;
DRM_DEBUG_KMS("channel %d, dp flow %d, possible_crtcs=0x%x\n",
......@@ -746,10 +829,13 @@ struct ipu_plane *ipu_plane_init(struct drm_device *dev, struct ipu_soc *ipu,
ipu_plane->dma = dma;
ipu_plane->dp_flow = dp;
if (ipu_prg_present(ipu))
modifiers = pre_format_modifiers;
ret = drm_universal_plane_init(dev, &ipu_plane->base, possible_crtcs,
&ipu_plane_funcs, ipu_plane_formats,
ARRAY_SIZE(ipu_plane_formats),
NULL, type, NULL);
modifiers, type, NULL);
if (ret) {
DRM_ERROR("failed to initialize plane\n");
kfree(ipu_plane);
......
config IMX_IPUV3_CORE
tristate "IPUv3 core support"
depends on SOC_IMX5 || SOC_IMX6Q || ARCH_MULTIPLATFORM
depends on SOC_IMX5 || SOC_IMX6Q || ARCH_MULTIPLATFORM || COMPILE_TEST
depends on DRM || !DRM # if DRM=m, this can't be 'y'
select BITREVERSE
select GENERIC_ALLOCATOR if DRM
select GENERIC_IRQ_CHIP
help
Choose this if you have a i.MX5/6 system and want to use the Image
......
......@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <linux/bitrev.h>
#include <linux/io.h>
#include <linux/sizes.h>
#include <drm/drm_fourcc.h>
#include "ipu-prv.h"
......
......@@ -17,6 +17,7 @@
#include <linux/bitrev.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/sizes.h>
#include "ipu-prv.h"
/* IC Register Offsets */
......
......@@ -49,6 +49,10 @@
#define IPU_PRE_TPR_CTRL 0x070
#define IPU_PRE_TPR_CTRL_TILE_FORMAT(v) ((v & 0xff) << 0)
#define IPU_PRE_TPR_CTRL_TILE_FORMAT_MASK 0xff
#define IPU_PRE_TPR_CTRL_TILE_FORMAT_16_BIT (1 << 0)
#define IPU_PRE_TPR_CTRL_TILE_FORMAT_SPLIT_BUF (1 << 4)
#define IPU_PRE_TPR_CTRL_TILE_FORMAT_SINGLE_BUF (1 << 5)
#define IPU_PRE_TPR_CTRL_TILE_FORMAT_SUPER_TILED (1 << 6)
#define IPU_PRE_PREFETCH_ENG_CTRL 0x080
#define IPU_PRE_PREF_ENG_CTRL_PREFETCH_EN (1 << 0)
......@@ -147,7 +151,7 @@ int ipu_pre_get(struct ipu_pre *pre)
val = IPU_PRE_CTRL_HANDSHAKE_ABORT_SKIP_EN |
IPU_PRE_CTRL_HANDSHAKE_EN |
IPU_PRE_CTRL_TPR_REST_SEL |
IPU_PRE_CTRL_BLOCK_16 | IPU_PRE_CTRL_SDW_UPDATE;
IPU_PRE_CTRL_SDW_UPDATE;
writel(val, pre->regs + IPU_PRE_CTRL);
pre->in_use = true;
......@@ -163,14 +167,17 @@ void ipu_pre_put(struct ipu_pre *pre)
void ipu_pre_configure(struct ipu_pre *pre, unsigned int width,
unsigned int height, unsigned int stride, u32 format,
unsigned int bufaddr)
uint64_t modifier, unsigned int bufaddr)
{
const struct drm_format_info *info = drm_format_info(format);
u32 active_bpp = info->cpp[0] >> 1;
u32 val;
/* calculate safe window for ctrl register updates */
pre->safe_window_end = height - 2;
if (modifier == DRM_FORMAT_MOD_LINEAR)
pre->safe_window_end = height - 2;
else
pre->safe_window_end = DIV_ROUND_UP(height, 4) - 1;
writel(bufaddr, pre->regs + IPU_PRE_CUR_BUF);
writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
......@@ -203,9 +210,25 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width,
writel(pre->buffer_paddr, pre->regs + IPU_PRE_STORE_ENG_ADDR);
val = readl(pre->regs + IPU_PRE_TPR_CTRL);
val &= ~IPU_PRE_TPR_CTRL_TILE_FORMAT_MASK;
if (modifier != DRM_FORMAT_MOD_LINEAR) {
/* only support single buffer formats for now */
val |= IPU_PRE_TPR_CTRL_TILE_FORMAT_SINGLE_BUF;
if (modifier == DRM_FORMAT_MOD_VIVANTE_SUPER_TILED)
val |= IPU_PRE_TPR_CTRL_TILE_FORMAT_SUPER_TILED;
if (info->cpp[0] == 2)
val |= IPU_PRE_TPR_CTRL_TILE_FORMAT_16_BIT;
}
writel(val, pre->regs + IPU_PRE_TPR_CTRL);
val = readl(pre->regs + IPU_PRE_CTRL);
val |= IPU_PRE_CTRL_EN_REPEAT | IPU_PRE_CTRL_ENABLE |
IPU_PRE_CTRL_SDW_UPDATE;
if (modifier == DRM_FORMAT_MOD_LINEAR)
val &= ~IPU_PRE_CTRL_BLOCK_EN;
else
val |= IPU_PRE_CTRL_BLOCK_EN;
writel(val, pre->regs + IPU_PRE_CTRL);
}
......
......@@ -20,6 +20,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <video/imx-ipu-v3.h>
......@@ -132,28 +133,25 @@ bool ipu_prg_format_supported(struct ipu_soc *ipu, uint32_t format,
if (info->num_planes != 1)
return false;
return true;
switch (modifier) {
case DRM_FORMAT_MOD_LINEAR:
case DRM_FORMAT_MOD_VIVANTE_TILED:
case DRM_FORMAT_MOD_VIVANTE_SUPER_TILED:
return true;
default:
return false;
}
}
EXPORT_SYMBOL_GPL(ipu_prg_format_supported);
int ipu_prg_enable(struct ipu_soc *ipu)
{
struct ipu_prg *prg = ipu->prg_priv;
int ret;
if (!prg)
return 0;
ret = clk_prepare_enable(prg->clk_axi);
if (ret)
goto fail_disable_ipg;
return 0;
fail_disable_ipg:
clk_disable_unprepare(prg->clk_ipg);
return ret;
return pm_runtime_get_sync(prg->dev);
}
EXPORT_SYMBOL_GPL(ipu_prg_enable);
......@@ -164,7 +162,7 @@ void ipu_prg_disable(struct ipu_soc *ipu)
if (!prg)
return;
clk_disable_unprepare(prg->clk_axi);
pm_runtime_put(prg->dev);
}
EXPORT_SYMBOL_GPL(ipu_prg_disable);
......@@ -255,7 +253,7 @@ void ipu_prg_channel_disable(struct ipuv3_channel *ipu_chan)
if (!chan->enabled || prg_chan < 0)
return;
clk_prepare_enable(prg->clk_ipg);
pm_runtime_get_sync(prg->dev);
val = readl(prg->regs + IPU_PRG_CTL);
val |= IPU_PRG_CTL_BYPASS(prg_chan);
......@@ -264,7 +262,7 @@ void ipu_prg_channel_disable(struct ipuv3_channel *ipu_chan)
val = IPU_PRG_REG_UPDATE_REG_UPDATE;
writel(val, prg->regs + IPU_PRG_REG_UPDATE);
clk_disable_unprepare(prg->clk_ipg);
pm_runtime_put(prg->dev);
ipu_prg_put_pre(prg, prg_chan);
......@@ -275,7 +273,7 @@ EXPORT_SYMBOL_GPL(ipu_prg_channel_disable);
int ipu_prg_channel_configure(struct ipuv3_channel *ipu_chan,
unsigned int axi_id, unsigned int width,
unsigned int height, unsigned int stride,
u32 format, unsigned long *eba)
u32 format, uint64_t modifier, unsigned long *eba)
{
int prg_chan = ipu_prg_ipu_to_prg_chan(ipu_chan->num);
struct ipu_prg *prg = ipu_chan->ipu->prg_priv;
......@@ -296,14 +294,10 @@ int ipu_prg_channel_configure(struct ipuv3_channel *ipu_chan,
return ret;
ipu_pre_configure(prg->pres[chan->used_pre],
width, height, stride, format, *eba);
width, height, stride, format, modifier, *eba);
ret = clk_prepare_enable(prg->clk_ipg);
if (ret) {
ipu_prg_put_pre(prg, prg_chan);
return ret;
}
pm_runtime_get_sync(prg->dev);
val = (stride - 1) & IPU_PRG_STRIDE_STRIDE_MASK;
writel(val, prg->regs + IPU_PRG_STRIDE(prg_chan));
......@@ -336,7 +330,7 @@ int ipu_prg_channel_configure(struct ipuv3_channel *ipu_chan,
(val & IPU_PRG_STATUS_BUFFER1_READY(prg_chan)),
5, 1000);
clk_disable_unprepare(prg->clk_ipg);
pm_runtime_put(prg->dev);
chan->enabled = true;
return 0;
......@@ -384,6 +378,12 @@ static int ipu_prg_probe(struct platform_device *pdev)
if (ret)
return ret;
ret = clk_prepare_enable(prg->clk_axi);
if (ret) {
clk_disable_unprepare(prg->clk_ipg);
return ret;
}
/* init to free running mode */
val = readl(prg->regs + IPU_PRG_CTL);
val |= IPU_PRG_CTL_SHADOW_EN;
......@@ -392,7 +392,8 @@ static int ipu_prg_probe(struct platform_device *pdev)
/* disable address threshold */
writel(0xffffffff, prg->regs + IPU_PRG_THD);
clk_disable_unprepare(prg->clk_ipg);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
prg->dev = dev;
platform_set_drvdata(pdev, prg);
......@@ -414,6 +415,40 @@ static int ipu_prg_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM
static int prg_suspend(struct device *dev)
{
struct ipu_prg *prg = dev_get_drvdata(dev);
clk_disable_unprepare(prg->clk_axi);
clk_disable_unprepare(prg->clk_ipg);
return 0;
}
static int prg_resume(struct device *dev)
{
struct ipu_prg *prg = dev_get_drvdata(dev);
int ret;
ret = clk_prepare_enable(prg->clk_ipg);
if (ret)
return ret;
ret = clk_prepare_enable(prg->clk_axi);
if (ret) {
clk_disable_unprepare(prg->clk_ipg);
return ret;
}
return 0;
}
#endif
static const struct dev_pm_ops prg_pm_ops = {
SET_RUNTIME_PM_OPS(prg_suspend, prg_resume, NULL)
};
static const struct of_device_id ipu_prg_dt_ids[] = {
{ .compatible = "fsl,imx6qp-prg", },
{ /* sentinel */ },
......@@ -424,6 +459,7 @@ struct platform_driver ipu_prg_drv = {
.remove = ipu_prg_remove,
.driver = {
.name = "imx-ipu-prg",
.pm = &prg_pm_ops,
.of_match_table = ipu_prg_dt_ids,
},
};
......@@ -269,8 +269,8 @@ int ipu_pre_get(struct ipu_pre *pre);
void ipu_pre_put(struct ipu_pre *pre);
u32 ipu_pre_get_baddr(struct ipu_pre *pre);
void ipu_pre_configure(struct ipu_pre *pre, unsigned int width,
unsigned int height,
unsigned int stride, u32 format, unsigned int bufaddr);
unsigned int height, unsigned int stride, u32 format,
uint64_t modifier, unsigned int bufaddr);
void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr);
struct ipu_prg *ipu_prg_lookup_by_phandle(struct device *dev, const char *name,
......
......@@ -344,7 +344,7 @@ void ipu_prg_channel_disable(struct ipuv3_channel *ipu_chan);
int ipu_prg_channel_configure(struct ipuv3_channel *ipu_chan,
unsigned int axi_id, unsigned int width,
unsigned int height, unsigned int stride,
u32 format, unsigned long *eba);
u32 format, uint64_t modifier, unsigned long *eba);
/*
* IPU CMOS Sensor Interface (csi) functions
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册