提交 b03bb79d 编写于 作者: T Thierry Reding

Merge tag 'tegra-for-3.14-dmas-resets-rework' into drm/for-next

ARM: tegra: implement common DMA and resets DT bindings

This series converts the Tegra DTs and drivers to use the common/
standard DMA and reset bindings, rather than custom bindings. It also
adds complete documentation for the Tegra clock bindings without
actually changing any binding definitions.

This conversion relies on a few sets of patches in branches from outside
the Tegra tree:

1) A patch to add an DMA channel request API which allows deferred probe
   to be implemented.

2) A patch to implement a common part of the of_xlate function for DMA
   controllers.

3) Some ASoC patches (which in turn rely on (1) above), which support
   deferred probe during DMA channel allocation.

4) The Tegra clock driver changes for 3.14.

Consequently, this branch is based on a merge of all of those external
branches.

In turn, this branch is or will be pulled into a few places that either
rely on features introduced here, or would otherwise conflict with the
patches:

a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid
   conflicts.

b) The DRM tree, which introduces new code that relies on the reset
   controller framework introduced in this branch, and to avoid
   conflicts.
......@@ -9,6 +9,7 @@ Required properties:
- compatible : Should contain "nvidia,tegra<chip>-pmc".
- reg : Offset and length of the register set for the device
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pclk" (The Tegra clock of that name),
"clk32k_in" (The 32KHz clock input to Tegra).
......
......@@ -15,6 +15,9 @@ Required properties :
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra114-car.h>.
- #reset-cells : Should be 1.
In clock consumers, this cell represents the bit number in the CAR's
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
......@@ -23,6 +26,7 @@ Example SoC include file:
compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usb@c5004000 {
......
NVIDIA Tegra124 Clock And Reset Controller
This binding uses the common clock binding:
Documentation/devicetree/bindings/clock/clock-bindings.txt
The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
for muxing and gating Tegra's clocks, and setting their rates.
Required properties :
- compatible : Should be "nvidia,tegra124-car"
- reg : Should contain CAR registers location and length
- clocks : Should contain phandle and clock specifiers for two clocks:
the 32 KHz "32k_in", and the board-specific oscillator "osc".
- #clock-cells : Should be 1.
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra124-car.h>.
- #reset-cells : Should be 1.
In clock consumers, this cell represents the bit number in the CAR's
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
/ {
tegra_car: clock {
compatible = "nvidia,tegra124-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usb@c5004000 {
clocks = <&tegra_car TEGRA124_CLK_USB2>;
};
};
Example board file:
/ {
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
osc: clock@0 {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <112400000>;
};
clk_32k: clock@1 {
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
&tegra_car {
clocks = <&clk_32k> <&osc>;
};
};
......@@ -15,6 +15,9 @@ Required properties :
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra20-car.h>.
- #reset-cells : Should be 1.
In clock consumers, this cell represents the bit number in the CAR's
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
......@@ -23,6 +26,7 @@ Example SoC include file:
compatible = "nvidia,tegra20-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usb@c5004000 {
......
......@@ -15,6 +15,9 @@ Required properties :
In clock consumers, this cell represents the clock ID exposed by the
CAR. The assignments may be found in header file
<dt-bindings/clock/tegra30-car.h>.
- #reset-cells : Should be 1.
In clock consumers, this cell represents the bit number in the CAR's
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
Example SoC include file:
......@@ -23,6 +26,7 @@ Example SoC include file:
compatible = "nvidia,tegra30-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usb@c5004000 {
......
......@@ -5,6 +5,16 @@ Required properties:
- reg: Should contain DMA registers location and length. This shuld include
all of the per-channel registers.
- interrupts: Should contain all of the per-channel DMA interrupts.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- dma
- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
client nodes' dmas properties. The specifier represents the DMA request
select value for the peripheral. For more details, consult the Tegra TRM's
documentation of the APB DMA channel control register REQ_SEL field.
Examples:
......@@ -27,4 +37,8 @@ apbdma: dma@6000a000 {
0 149 0x04
0 150 0x04
0 151 0x04 >;
clocks = <&tegra_car 34>;
resets = <&tegra_car 34>;
reset-names = "dma";
#dma-cells = <1>;
};
......@@ -9,6 +9,12 @@ Required properties:
- #size-cells: The number of cells used to represent the size of an address
range in the host1x address space. Should be 1.
- ranges: The mapping of the host1x address space to the CPU address space.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- host1x
The host1x top-level node defines a number of children, each representing one
of the following host1x client modules:
......@@ -19,6 +25,12 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-mpe"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- mpe
- vi: video input
......@@ -26,6 +38,12 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-vi"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- vi
- epp: encoder pre-processor
......@@ -33,6 +51,12 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-epp"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- epp
- isp: image signal processor
......@@ -40,6 +64,12 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-isp"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- isp
- gr2d: 2D graphics engine
......@@ -47,12 +77,30 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-gr2d"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- 2d
- gr3d: 3D graphics engine
Required properties:
- compatible: "nvidia,tegra<chip>-gr3d"
- reg: Physical base address and length of the controller's registers.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
(This property may be omitted if the only clock in the list is "3d")
- 3d
This MUST be the first entry.
- 3d2 (Only required on SoCs with two 3D clocks)
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- 3d
- 3d2 (Only required on SoCs with two 3D clocks)
- dc: display controller
......@@ -60,6 +108,16 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-dc"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- dc
This MUST be the first entry.
- parent
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- dc
Each display controller node has a child node, named "rgb", that represents
the RGB output associated with the controller. It can take the following
......@@ -76,6 +134,16 @@ of the following host1x client modules:
- interrupts: The interrupt outputs from the controller.
- vdd-supply: regulator for supply voltage
- pll-supply: regulator for PLL
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- hdmi
This MUST be the first entry.
- parent
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- hdmi
Optional properties:
- nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
......@@ -88,12 +156,24 @@ of the following host1x client modules:
- compatible: "nvidia,tegra<chip>-tvo"
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt outputs from the controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- dsi: display serial interface
Required properties:
- compatible: "nvidia,tegra<chip>-dsi"
- reg: Physical base address and length of the controller's registers.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- dsi
This MUST be the first entry.
- parent
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- dsi
Example:
......@@ -105,6 +185,9 @@ Example:
reg = <0x50000000 0x00024000>;
interrupts = <0 65 0x04 /* mpcore syncpt */
0 67 0x04>; /* mpcore general */
clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
resets = <&tegra_car 28>;
reset-names = "host1x";
#address-cells = <1>;
#size-cells = <1>;
......@@ -115,41 +198,64 @@ Example:
compatible = "nvidia,tegra20-mpe";
reg = <0x54040000 0x00040000>;
interrupts = <0 68 0x04>;
clocks = <&tegra_car TEGRA20_CLK_MPE>;
resets = <&tegra_car 60>;
reset-names = "mpe";
};
vi {
compatible = "nvidia,tegra20-vi";
reg = <0x54080000 0x00040000>;
interrupts = <0 69 0x04>;
clocks = <&tegra_car TEGRA20_CLK_VI>;
resets = <&tegra_car 100>;
reset-names = "vi";
};
epp {
compatible = "nvidia,tegra20-epp";
reg = <0x540c0000 0x00040000>;
interrupts = <0 70 0x04>;
clocks = <&tegra_car TEGRA20_CLK_EPP>;
resets = <&tegra_car 19>;
reset-names = "epp";
};
isp {
compatible = "nvidia,tegra20-isp";
reg = <0x54100000 0x00040000>;
interrupts = <0 71 0x04>;
clocks = <&tegra_car TEGRA20_CLK_ISP>;
resets = <&tegra_car 23>;
reset-names = "isp";
};
gr2d {
compatible = "nvidia,tegra20-gr2d";
reg = <0x54140000 0x00040000>;
interrupts = <0 72 0x04>;
clocks = <&tegra_car TEGRA20_CLK_GR2D>;
resets = <&tegra_car 21>;
reset-names = "2d";
};
gr3d {
compatible = "nvidia,tegra20-gr3d";
reg = <0x54180000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_GR3D>;
resets = <&tegra_car 24>;
reset-names = "3d";
};
dc@54200000 {
compatible = "nvidia,tegra20-dc";
reg = <0x54200000 0x00040000>;
interrupts = <0 73 0x04>;
clocks = <&tegra_car TEGRA20_CLK_DISP1>,
<&tegra_car TEGRA20_CLK_PLL_P>;
clock-names = "disp1", "parent";
resets = <&tegra_car 27>;
reset-names = "dc";
rgb {
status = "disabled";
......@@ -160,6 +266,11 @@ Example:
compatible = "nvidia,tegra20-dc";
reg = <0x54240000 0x00040000>;
interrupts = <0 74 0x04>;
clocks = <&tegra_car TEGRA20_CLK_DISP2>,
<&tegra_car TEGRA20_CLK_PLL_P>;
clock-names = "disp2", "parent";
resets = <&tegra_car 26>;
reset-names = "dc";
rgb {
status = "disabled";
......@@ -170,6 +281,11 @@ Example:
compatible = "nvidia,tegra20-hdmi";
reg = <0x54280000 0x00040000>;
interrupts = <0 75 0x04>;
clocks = <&tegra_car TEGRA20_CLK_HDMI>,
<&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
clock-names = "hdmi", "parent";
resets = <&tegra_car 51>;
reset-names = "hdmi";
status = "disabled";
};
......@@ -177,12 +293,18 @@ Example:
compatible = "nvidia,tegra20-tvo";
reg = <0x542c0000 0x00040000>;
interrupts = <0 76 0x04>;
clocks = <&tegra_car TEGRA20_CLK_TVO>;
status = "disabled";
};
dsi {
compatible = "nvidia,tegra20-dsi";
reg = <0x54300000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_DSI>,
<&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
clock-names = "dsi", "parent";
resets = <&tegra_car 48>;
reset-names = "dsi";
status = "disabled";
};
};
......
......@@ -39,12 +39,23 @@ Required properties:
- interrupts: Should contain I2C controller interrupts.
- address-cells: Address cells for I2C device address.
- size-cells: Size of the I2C device address.
- clocks: Clock ID as per
Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
for I2C controller.
- clock-names: Name of the clock:
Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
Tegra114 I2C controller: "div-clk".
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
Tegra20/Tegra30:
- div-clk
- fast-clk
Tegra114:
- div-clk
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- i2c
- dmas: Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names: Must include the following entries:
- rx
- tx
Example:
......@@ -56,5 +67,9 @@ Example:
#size-cells = <0>;
clocks = <&tegra_car 12>, <&tegra_car 124>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 12>;
reset-names = "i2c";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -13,6 +13,12 @@ Required properties:
array of pin numbers which is used as column.
- linux,keymap: The keymap for keys as described in the binding document
devicetree/bindings/input/matrix-keymap.txt.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- kbc
Optional properties, in addition to those specified by the shared
matrix-keyboard bindings:
......@@ -31,6 +37,9 @@ keyboard: keyboard {
compatible = "nvidia,tegra20-kbc";
reg = <0x7000e200 0x100>;
interrupts = <0 85 0x04>;
clocks = <&tegra_car 36>;
resets = <&tegra_car 36>;
reset-names = "kbc";
nvidia,ghost-filter;
nvidia,debounce-delay-ms = <640>;
nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */
......
......@@ -8,6 +8,12 @@ by mmc.txt and the properties used by the sdhci-tegra driver.
Required properties:
- compatible : Should be "nvidia,<chip>-sdhci"
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- sdhci
Optional properties:
- power-gpios : Specify GPIOs for power control
......@@ -18,6 +24,9 @@ sdhci@c8000200 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000200 0x200>;
interrupts = <47>;
clocks = <&tegra_car 14>;
resets = <&tegra_car 14>;
reset-names = "sdhci";
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
......
......@@ -7,3 +7,15 @@ Required properties:
- clock-frequency : the frequency of the i2c bus
- gpios : the gpio used for ec request
- slave-addr: the i2c address of the slave controller
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
Tegra20/Tegra30:
- div-clk
- fast-clk
Tegra114:
- div-clk
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- i2c
......@@ -42,14 +42,19 @@ Required properties:
- 0xc2000000: prefetchable memory region
Please refer to the standard PCI bus binding document for a more detailed
explanation.
- clocks: List of clock inputs of the controller. Must contain an entry for
each entry in the clock-names property.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
"pex": The Tegra clock of that name
"afi": The Tegra clock of that name
"pcie_xclk": The Tegra clock of that name
"pll_e": The Tegra clock of that name
"cml": The Tegra clock of that name (not required for Tegra20)
- pex
- afi
- pll_e
- cml (not required for Tegra20)
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- pex
- afi
- pcie_x
Root ports are defined as subnodes of the PCIe controller node.
......@@ -91,9 +96,10 @@ SoC DTSI:
0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */
0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>,
<&tegra_car 118>;
clock-names = "pex", "afi", "pcie_xclk", "pll_e";
clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>;
clock-names = "pex", "afi", "pll_e";
resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
pci@1,0 {
......
......@@ -7,6 +7,12 @@ Required properties:
- reg: physical base address and length of the controller's registers
- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
the cells format.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- pwm
Example:
......@@ -14,4 +20,7 @@ Example:
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car 17>;
resets = <&tegra_car 17>;
reset-names = "pwm";
};
......@@ -9,6 +9,8 @@ Required properties:
- compatible : should be "nvidia,tegra20-rtc".
- reg : Specifies base physical address and size of the registers.
- interrupts : A single interrupt specifier.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
Example:
......@@ -16,4 +18,5 @@ timer {
compatible = "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
clocks = <&tegra_car 4>;
};
......@@ -4,8 +4,17 @@ Required properties:
- compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
- reg: Should contain UART controller registers location and length.
- interrupts: Should contain UART controller interrupts.
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this UART controller.
- clocks: Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- serial
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
Optional properties:
- nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
......@@ -18,7 +27,11 @@ serial@70006000 {
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <0 36 0x04>;
nvidia,dma-request-selector = <&apbdma 8>;
nvidia,enable-modem-interrupt;
clocks = <&tegra_car 6>;
resets = <&tegra_car 6>;
reset-names = "serial";
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-alc5632"
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pll_a" (The Tegra clock of that name),
"pll_a_out0" (The Tegra clock of that name),
"mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- pll_a
- pll_a_out0
- mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
......
......@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex, with RT5640 CODEC
Required properties:
- compatible : "nvidia,tegra-audio-rt5640"
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pll_a" (The Tegra clock of that name),
"pll_a_out0" (The Tegra clock of that name),
"mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- pll_a
- pll_a_out0
- mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
......
......@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm8753"
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pll_a" (The Tegra clock of that name),
"pll_a_out0" (The Tegra clock of that name),
"mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- pll_a
- pll_a_out0
- mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
......
......@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm8903"
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pll_a" (The Tegra clock of that name),
"pll_a_out0" (The Tegra clock of that name),
"mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- pll_a
- pll_a_out0
- mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
......
......@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm9712"
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
"pll_a" (The Tegra clock of that name),
"pll_a_out0" (The Tegra clock of that name),
"mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- pll_a
- pll_a_out0
- mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
......
......@@ -4,19 +4,33 @@ Required properties:
- compatible : "nvidia,tegra20-ac97"
- reg : Should contain AC97 controller registers location and length
- interrupts : Should contain AC97 interrupt
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for the AC97 controller
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- ac97
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
of the GPIO used to reset the external AC97 codec
- nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
of the GPIO corresponding with the AC97 DAP _FS line
Example:
ac97@70002000 {
compatible = "nvidia,tegra20-ac97";
reg = <0x70002000 0x200>;
interrupts = <0 81 0x04>;
nvidia,dma-request-selector = <&apbdma 12>;
nvidia,codec-reset-gpio = <&gpio 170 0>;
nvidia,codec-sync-gpio = <&gpio 120 0>;
clocks = <&tegra_car 3>;
resets = <&tegra_car 3>;
reset-names = "ac97";
dmas = <&apbdma 12>, <&apbdma 12>;
dma-names = "rx", "tx";
};
......@@ -4,8 +4,17 @@ Required properties:
- compatible : "nvidia,tegra20-i2s"
- reg : Should contain I2S registers location and length
- interrupts : Should contain I2S interrupt
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this I2S controller
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- i2s
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
Example:
......@@ -13,5 +22,9 @@ i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = < 45 >;
nvidia,dma-request-selector = < &apbdma 2 >;
clocks = <&tegra_car 11>;
resets = <&tegra_car 11>;
reset-names = "i2s";
dmas = <&apbdma 21>, <&apbdma 21>;
dma-names = "rx", "tx";
};
......@@ -7,18 +7,48 @@ Required properties:
- Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
- Tegra114 requires an additional entry, for the APBIF2 register block.
- interrupts : Should contain AHUB interrupt
- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
entry contains the Tegra DMA controller's phandle and request selector.
If a single entry is present, the request selectors for the channels are
assumed to be contiguous, and increment from this value.
If multiple values are given, one value must be given per channel.
- clocks : Must contain an entry for each required entry in clock-names.
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0,
dam1, dam2, spdif_in.
- Tegra114: Additionally requires amx, adx.
- d_audio
- apbif
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
Tegra30 and later:
- d_audio
- apbif
- i2s0
- i2s1
- i2s2
- i2s3
- i2s4
- dam0
- dam1
- dam2
- spdif
Tegra114 and later additionally require:
- amx
- adx
Tegra124 and later additionally require:
- amx1
- adx1
- afc0
- afc1
- afc2
- afc3
- afc4
- afc5
- ranges : The bus address mapping for the configlink register bus.
Can be empty since the mapping is 1:1.
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx0 .. rx<n>
- tx0 .. tx<n>
... where n is:
Tegra30: 3
Tegra114, Tegra124: 9
- #address-cells : For the configlink bus. Should be <1>;
- #size-cells : For the configlink bus. Should be <1>.
......@@ -35,13 +65,20 @@ ahub@70080000 {
reg = <0x70080000 0x200 0x70080200 0x100>;
interrupts = < 0 103 0x04 >;
nvidia,dma-request-selector = <&apbdma 1>;
clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
clocks = <&tegra_car 106>, <&tegra_car 107>;
clock-names = "d_audio", "apbif";
resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
<&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
<&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
<&tegra_car 110>, <&tegra_car 162>;
clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
<&tegra_car 110>, <&tegra_car 10>;
reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
"spdif_in";
"spdif";
dmas = <&apbdma 1>, <&apbdma 1>;
<&apbdma 2>, <&apbdma 2>;
<&apbdma 3>, <&apbdma 3>;
<&apbdma 4>, <&apbdma 4>;
dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3";
ranges;
#address-cells = <1>;
#size-cells = <1>;
......
......@@ -3,13 +3,22 @@ NVIDIA Tegra30 I2S controller
Required properties:
- compatible : "nvidia,tegra30-i2s"
- reg : Should contain I2S registers location and length
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- i2s
- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
Example:
i2s@70002800 {
i2s@70080300 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
clocks = <&tegra_car 11>;
resets = <&tegra_car 11>;
reset-names = "i2s";
};
......@@ -4,10 +4,19 @@ Required properties:
- compatible : should be "nvidia,tegra114-spi".
- reg: Should contain SPI registers location and length.
- interrupts: Should contain SPI interrupts.
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this SPI controller.
- This is also require clock named "spi" as per binding document
Documentation/devicetree/bindings/clock/clock-bindings.txt
- clock-names : Must include the following entries:
- spi
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- spi
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
- clocks : Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
Recommended properties:
- spi-max-frequency: Definition as per
......@@ -18,9 +27,14 @@ spi@7000d600 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
nvidia,dma-request-selector = <&apbdma 16>;
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 44>;
clock-names = "spi";
resets = <&tegra_car 44>;
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -4,8 +4,17 @@ Required properties:
- compatible : should be "nvidia,tegra20-sflash".
- reg: Should contain SFLASH registers location and length.
- interrupts: Should contain SFLASH interrupts.
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this SFLASH controller.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- spi
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
Recommended properties:
- spi-max-frequency: Definition as per
......@@ -17,10 +26,13 @@ spi@7000c380 {
compatible = "nvidia,tegra20-sflash";
reg = <0x7000c380 0x80>;
interrupts = <0 39 0x04>;
nvidia,dma-request-selector = <&apbdma 16>;
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 43>;
resets = <&tegra_car 43>;
reset-names = "spi";
dmas = <&apbdma 11>, <&apbdma 11>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -4,8 +4,17 @@ Required properties:
- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink".
- reg: Should contain SLINK registers location and length.
- interrupts: Should contain SLINK interrupts.
- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
request selector for this SLINK controller.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- spi
- dmas : Must contain an entry for each entry in clock-names.
See ../dma/dma.txt for details.
- dma-names : Must include the following entries:
- rx
- tx
Recommended properties:
- spi-max-frequency: Definition as per
......@@ -17,10 +26,13 @@ spi@7000d600 {
compatible = "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
nvidia,dma-request-selector = <&apbdma 16>;
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car 44>;
resets = <&tegra_car 44>;
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -8,6 +8,8 @@ Required properties:
- compatible : should be "nvidia,tegra20-timer".
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 4 interrupts; one per timer channel.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
Example:
......@@ -18,4 +20,5 @@ timer {
0 1 0x04
0 41 0x04
0 42 0x04>;
clocks = <&tegra_car 132>;
};
......@@ -10,6 +10,8 @@ Required properties:
- reg : Specifies base physical address and size of the registers.
- interrupts : A list of 6 interrupts; one per each of timer channels 1
through 5, and one for the shared interrupt for the remaining channels.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
timer {
compatible = "nvidia,tegra30-timer", "nvidia,tegra20-timer";
......@@ -20,4 +22,5 @@ timer {
0 42 0x04
0 121 0x04
0 122 0x04>;
clocks = <&tegra_car 214>;
};
......@@ -8,7 +8,12 @@ and additions :
Required properties :
- compatible : Should be "nvidia,tegra20-ehci".
- nvidia,phy : phandle of the PHY that the controller is connected to.
- clocks : Contains a single entry which defines the USB controller's clock.
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
- usb
Optional properties:
- nvidia,needs-double-reset : boolean is to be set for some of the Tegra20
......
......@@ -43,6 +43,7 @@
compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
apbdma: dma {
......@@ -81,6 +82,9 @@
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_APBDMA>;
resets = <&tegra_car 34>;
reset-names = "dma";
#dma-cells = <1>;
};
ahb: ahb {
......@@ -124,9 +128,12 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 8>;
status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTA>;
resets = <&tegra_car 6>;
reset-names = "serial";
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
uartb: serial@70006040 {
......@@ -134,9 +141,12 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 9>;
status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTB>;
resets = <&tegra_car 7>;
reset-names = "serial";
dmas = <&apbdma 9>, <&apbdma 9>;
dma-names = "rx", "tx";
status = "disabled";
};
uartc: serial@70006200 {
......@@ -144,9 +154,12 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 10>;
status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTC>;
resets = <&tegra_car 55>;
reset-names = "serial";
dmas = <&apbdma 10>, <&apbdma 10>;
dma-names = "rx", "tx";
status = "disabled";
};
uartd: serial@70006300 {
......@@ -154,9 +167,12 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 19>;
status = "disabled";
clocks = <&tegra_car TEGRA114_CLK_UARTD>;
resets = <&tegra_car 65>;
reset-names = "serial";
dmas = <&apbdma 19>, <&apbdma 19>;
dma-names = "rx", "tx";
status = "disabled";
};
pwm: pwm {
......@@ -164,6 +180,8 @@
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car TEGRA114_CLK_PWM>;
resets = <&tegra_car 17>;
reset-names = "pwm";
status = "disabled";
};
......@@ -175,6 +193,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C1>;
clock-names = "div-clk";
resets = <&tegra_car 12>;
reset-names = "i2c";
dmas = <&apbdma 21>, <&apbdma 21>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -186,6 +208,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C2>;
clock-names = "div-clk";
resets = <&tegra_car 54>;
reset-names = "i2c";
dmas = <&apbdma 22>, <&apbdma 22>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -197,6 +223,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C3>;
clock-names = "div-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
dmas = <&apbdma 23>, <&apbdma 23>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -208,6 +238,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C4>;
clock-names = "div-clk";
resets = <&tegra_car 103>;
reset-names = "i2c";
dmas = <&apbdma 26>, <&apbdma 26>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -219,6 +253,10 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_I2C5>;
clock-names = "div-clk";
resets = <&tegra_car 47>;
reset-names = "i2c";
dmas = <&apbdma 24>, <&apbdma 24>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -226,11 +264,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000d400 0x200>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC1>;
clock-names = "spi";
resets = <&tegra_car 41>;
reset-names = "spi";
dmas = <&apbdma 15>, <&apbdma 15>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -238,11 +279,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000d600 0x200>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC2>;
clock-names = "spi";
resets = <&tegra_car 44>;
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -250,11 +294,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000d800 0x200>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC3>;
clock-names = "spi";
resets = <&tegra_car 46>;
reset-names = "spi";
dmas = <&apbdma 17>, <&apbdma 17>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -262,11 +309,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000da00 0x200>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC4>;
clock-names = "spi";
resets = <&tegra_car 68>;
reset-names = "spi";
dmas = <&apbdma 18>, <&apbdma 18>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -274,11 +324,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000dc00 0x200>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC5>;
clock-names = "spi";
resets = <&tegra_car 104>;
reset-names = "spi";
dmas = <&apbdma 27>, <&apbdma 27>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -286,11 +339,14 @@
compatible = "nvidia,tegra114-spi";
reg = <0x7000de00 0x200>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA114_CLK_SBC6>;
clock-names = "spi";
resets = <&tegra_car 105>;
reset-names = "spi";
dmas = <&apbdma 28>, <&apbdma 28>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -306,6 +362,8 @@
reg = <0x7000e200 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_KBC>;
resets = <&tegra_car 36>;
reset-names = "kbc";
status = "disabled";
};
......@@ -333,26 +391,39 @@
<0x70080200 0x100>,
<0x70081000 0x200>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 1>, <&apbdma 2>,
<&apbdma 3>, <&apbdma 4>, <&apbdma 6>, <&apbdma 7>,
<&apbdma 12>, <&apbdma 13>, <&apbdma 14>,
<&apbdma 29>;
clocks = <&tegra_car TEGRA114_CLK_D_AUDIO>,
<&tegra_car TEGRA114_CLK_APBIF>,
<&tegra_car TEGRA114_CLK_I2S0>,
<&tegra_car TEGRA114_CLK_I2S1>,
<&tegra_car TEGRA114_CLK_I2S2>,
<&tegra_car TEGRA114_CLK_I2S3>,
<&tegra_car TEGRA114_CLK_I2S4>,
<&tegra_car TEGRA114_CLK_DAM0>,
<&tegra_car TEGRA114_CLK_DAM1>,
<&tegra_car TEGRA114_CLK_DAM2>,
<&tegra_car TEGRA114_CLK_SPDIF_IN>,
<&tegra_car TEGRA114_CLK_AMX>,
<&tegra_car TEGRA114_CLK_ADX>;
clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
<&tegra_car TEGRA114_CLK_APBIF>;
clock-names = "d_audio", "apbif";
resets = <&tegra_car 106>, /* d_audio */
<&tegra_car 107>, /* apbif */
<&tegra_car 30>, /* i2s0 */
<&tegra_car 11>, /* i2s1 */
<&tegra_car 18>, /* i2s2 */
<&tegra_car 101>, /* i2s3 */
<&tegra_car 102>, /* i2s4 */
<&tegra_car 108>, /* dam0 */
<&tegra_car 109>, /* dam1 */
<&tegra_car 110>, /* dam2 */
<&tegra_car 10>, /* spdif */
<&tegra_car 153>, /* amx */
<&tegra_car 154>; /* adx */
reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
"spdif_in", "amx", "adx";
"spdif", "amx", "adx";
dmas = <&apbdma 1>, <&apbdma 1>,
<&apbdma 2>, <&apbdma 2>,
<&apbdma 3>, <&apbdma 3>,
<&apbdma 4>, <&apbdma 4>,
<&apbdma 6>, <&apbdma 6>,
<&apbdma 7>, <&apbdma 7>,
<&apbdma 12>, <&apbdma 12>,
<&apbdma 13>, <&apbdma 13>,
<&apbdma 14>, <&apbdma 14>,
<&apbdma 29>, <&apbdma 29>;
dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
"rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
"rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
"rx9", "tx9";
ranges;
#address-cells = <1>;
#size-cells = <1>;
......@@ -362,6 +433,8 @@
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
clocks = <&tegra_car TEGRA114_CLK_I2S0>;
resets = <&tegra_car 30>;
reset-names = "i2s";
status = "disabled";
};
......@@ -370,6 +443,8 @@
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
clocks = <&tegra_car TEGRA114_CLK_I2S1>;
resets = <&tegra_car 11>;
reset-names = "i2s";
status = "disabled";
};
......@@ -378,6 +453,8 @@
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
clocks = <&tegra_car TEGRA114_CLK_I2S2>;
resets = <&tegra_car 18>;
reset-names = "i2s";
status = "disabled";
};
......@@ -386,6 +463,8 @@
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
clocks = <&tegra_car TEGRA114_CLK_I2S3>;
resets = <&tegra_car 101>;
reset-names = "i2s";
status = "disabled";
};
......@@ -394,6 +473,8 @@
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
clocks = <&tegra_car TEGRA114_CLK_I2S4>;
resets = <&tegra_car 102>;
reset-names = "i2s";
status = "disabled";
};
};
......@@ -403,6 +484,8 @@
reg = <0x78000000 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
resets = <&tegra_car 14>;
reset-names = "sdhci";
status = "disable";
};
......@@ -411,6 +494,8 @@
reg = <0x78000200 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
resets = <&tegra_car 9>;
reset-names = "sdhci";
status = "disable";
};
......@@ -419,6 +504,8 @@
reg = <0x78000400 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
resets = <&tegra_car 69>;
reset-names = "sdhci";
status = "disable";
};
......@@ -427,6 +514,8 @@
reg = <0x78000600 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
resets = <&tegra_car 15>;
reset-names = "sdhci";
status = "disable";
};
......@@ -436,6 +525,8 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USBD>;
resets = <&tegra_car 22>;
reset-names = "usb";
nvidia,phy = <&phy1>;
status = "disabled";
};
......@@ -467,6 +558,8 @@
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA114_CLK_USB3>;
resets = <&tegra_car 59>;
reset-names = "usb";
nvidia,phy = <&phy3>;
status = "disabled";
};
......
......@@ -280,6 +280,8 @@
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
};
i2c@7000d000 {
......
......@@ -22,6 +22,8 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
resets = <&tegra_car 28>;
reset-names = "host1x";
#address-cells = <1>;
#size-cells = <1>;
......@@ -33,6 +35,8 @@
reg = <0x54040000 0x00040000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_MPE>;
resets = <&tegra_car 60>;
reset-names = "mpe";
};
vi {
......@@ -40,6 +44,8 @@
reg = <0x54080000 0x00040000>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_VI>;
resets = <&tegra_car 20>;
reset-names = "vi";
};
epp {
......@@ -47,6 +53,8 @@
reg = <0x540c0000 0x00040000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_EPP>;
resets = <&tegra_car 19>;
reset-names = "epp";
};
isp {
......@@ -54,6 +62,8 @@
reg = <0x54100000 0x00040000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_ISP>;
resets = <&tegra_car 23>;
reset-names = "isp";
};
gr2d {
......@@ -61,12 +71,16 @@
reg = <0x54140000 0x00040000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_GR2D>;
resets = <&tegra_car 21>;
reset-names = "2d";
};
gr3d {
compatible = "nvidia,tegra20-gr3d";
reg = <0x54180000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_GR3D>;
resets = <&tegra_car 24>;
reset-names = "3d";
};
dc@54200000 {
......@@ -75,7 +89,9 @@
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_DISP1>,
<&tegra_car TEGRA20_CLK_PLL_P>;
clock-names = "disp1", "parent";
clock-names = "dc", "parent";
resets = <&tegra_car 27>;
reset-names = "dc";
rgb {
status = "disabled";
......@@ -88,7 +104,9 @@
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_DISP2>,
<&tegra_car TEGRA20_CLK_PLL_P>;
clock-names = "disp2", "parent";
clock-names = "dc", "parent";
resets = <&tegra_car 26>;
reset-names = "dc";
rgb {
status = "disabled";
......@@ -102,6 +120,8 @@
clocks = <&tegra_car TEGRA20_CLK_HDMI>,
<&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
clock-names = "hdmi", "parent";
resets = <&tegra_car 51>;
reset-names = "hdmi";
status = "disabled";
};
......@@ -117,6 +137,8 @@
compatible = "nvidia,tegra20-dsi";
reg = <0x54300000 0x00040000>;
clocks = <&tegra_car TEGRA20_CLK_DSI>;
resets = <&tegra_car 48>;
reset-names = "dsi";
status = "disabled";
};
};
......@@ -160,6 +182,7 @@
compatible = "nvidia,tegra20-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
apbdma: dma {
......@@ -182,6 +205,9 @@
<GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_APBDMA>;
resets = <&tegra_car 34>;
reset-names = "dma";
#dma-cells = <1>;
};
ahb {
......@@ -222,8 +248,11 @@
compatible = "nvidia,tegra20-ac97";
reg = <0x70002000 0x200>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 12>;
clocks = <&tegra_car TEGRA20_CLK_AC97>;
resets = <&tegra_car 3>;
reset-names = "ac97";
dmas = <&apbdma 12>, <&apbdma 12>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -231,8 +260,11 @@
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 2>;
clocks = <&tegra_car TEGRA20_CLK_I2S1>;
resets = <&tegra_car 11>;
reset-names = "i2s";
dmas = <&apbdma 2>, <&apbdma 2>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -240,8 +272,11 @@
compatible = "nvidia,tegra20-i2s";
reg = <0x70002a00 0x200>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 1>;
clocks = <&tegra_car TEGRA20_CLK_I2S2>;
resets = <&tegra_car 18>;
reset-names = "i2s";
dmas = <&apbdma 1>, <&apbdma 1>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -257,8 +292,11 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car TEGRA20_CLK_UARTA>;
resets = <&tegra_car 6>;
reset-names = "serial";
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -267,8 +305,11 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 9>;
clocks = <&tegra_car TEGRA20_CLK_UARTB>;
resets = <&tegra_car 7>;
reset-names = "serial";
dmas = <&apbdma 9>, <&apbdma 9>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -277,8 +318,11 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 10>;
clocks = <&tegra_car TEGRA20_CLK_UARTC>;
resets = <&tegra_car 55>;
reset-names = "serial";
dmas = <&apbdma 10>, <&apbdma 10>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -287,8 +331,11 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 19>;
clocks = <&tegra_car TEGRA20_CLK_UARTD>;
resets = <&tegra_car 65>;
reset-names = "serial";
dmas = <&apbdma 19>, <&apbdma 19>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -297,8 +344,11 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 20>;
clocks = <&tegra_car TEGRA20_CLK_UARTE>;
resets = <&tegra_car 66>;
reset-names = "serial";
dmas = <&apbdma 20>, <&apbdma 20>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -307,6 +357,8 @@
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car TEGRA20_CLK_PWM>;
resets = <&tegra_car 17>;
reset-names = "pwm";
status = "disabled";
};
......@@ -326,6 +378,10 @@
clocks = <&tegra_car TEGRA20_CLK_I2C1>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 12>;
reset-names = "i2c";
dmas = <&apbdma 21>, <&apbdma 21>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -333,10 +389,13 @@
compatible = "nvidia,tegra20-sflash";
reg = <0x7000c380 0x80>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 11>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SPI>;
resets = <&tegra_car 43>;
reset-names = "spi";
dmas = <&apbdma 11>, <&apbdma 11>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -349,6 +408,10 @@
clocks = <&tegra_car TEGRA20_CLK_I2C2>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 54>;
reset-names = "i2c";
dmas = <&apbdma 22>, <&apbdma 22>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -361,6 +424,10 @@
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
dmas = <&apbdma 23>, <&apbdma 23>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -373,6 +440,10 @@
clocks = <&tegra_car TEGRA20_CLK_DVC>,
<&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 47>;
reset-names = "i2c";
dmas = <&apbdma 24>, <&apbdma 24>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -380,10 +451,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000d400 0x200>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC1>;
resets = <&tegra_car 41>;
reset-names = "spi";
dmas = <&apbdma 15>, <&apbdma 15>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -391,10 +465,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC2>;
resets = <&tegra_car 44>;
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -402,10 +479,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000d800 0x200>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC3>;
resets = <&tegra_car 46>;
reset-names = "spi";
dmas = <&apbdma 17>, <&apbdma 17>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -413,10 +493,13 @@
compatible = "nvidia,tegra20-slink";
reg = <0x7000da00 0x200>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA20_CLK_SBC4>;
resets = <&tegra_car 68>;
reset-names = "spi";
dmas = <&apbdma 18>, <&apbdma 18>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -425,6 +508,8 @@
reg = <0x7000e200 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_KBC>;
resets = <&tegra_car 36>;
reset-names = "kbc";
status = "disabled";
};
......@@ -478,9 +563,12 @@
clocks = <&tegra_car TEGRA20_CLK_PEX>,
<&tegra_car TEGRA20_CLK_AFI>,
<&tegra_car TEGRA20_CLK_PCIE_XCLK>,
<&tegra_car TEGRA20_CLK_PLL_E>;
clock-names = "pex", "afi", "pcie_xclk", "pll_e";
clock-names = "pex", "afi", "pll_e";
resets = <&tegra_car 70>,
<&tegra_car 72>,
<&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
pci@1,0 {
......@@ -517,6 +605,8 @@
phy_type = "utmi";
nvidia,has-legacy-mode;
clocks = <&tegra_car TEGRA20_CLK_USBD>;
resets = <&tegra_car 22>;
reset-names = "usb";
nvidia,needs-double-reset;
nvidia,phy = <&phy1>;
status = "disabled";
......@@ -548,6 +638,8 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA20_CLK_USB2>;
resets = <&tegra_car 58>;
reset-names = "usb";
nvidia,phy = <&phy2>;
status = "disabled";
};
......@@ -569,6 +661,8 @@
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA20_CLK_USB3>;
resets = <&tegra_car 59>;
reset-names = "usb";
nvidia,phy = <&phy3>;
status = "disabled";
};
......@@ -597,6 +691,8 @@
reg = <0xc8000000 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
resets = <&tegra_car 14>;
reset-names = "sdhci";
status = "disabled";
};
......@@ -605,6 +701,8 @@
reg = <0xc8000200 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
resets = <&tegra_car 9>;
reset-names = "sdhci";
status = "disabled";
};
......@@ -613,6 +711,8 @@
reg = <0xc8000400 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
resets = <&tegra_car 69>;
reset-names = "sdhci";
status = "disabled";
};
......@@ -621,6 +721,8 @@
reg = <0xc8000600 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
resets = <&tegra_car 15>;
reset-names = "sdhci";
status = "disabled";
};
......
......@@ -40,10 +40,13 @@
clocks = <&tegra_car TEGRA30_CLK_PCIE>,
<&tegra_car TEGRA30_CLK_AFI>,
<&tegra_car TEGRA30_CLK_PCIEX>,
<&tegra_car TEGRA30_CLK_PLL_E>,
<&tegra_car TEGRA30_CLK_CML0>;
clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
clock-names = "pex", "afi", "pll_e", "cml";
resets = <&tegra_car 70>,
<&tegra_car 72>,
<&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
status = "disabled";
pci@1,0 {
......@@ -92,6 +95,8 @@
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
resets = <&tegra_car 28>;
reset-names = "host1x";
#address-cells = <1>;
#size-cells = <1>;
......@@ -103,6 +108,8 @@
reg = <0x54040000 0x00040000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_MPE>;
resets = <&tegra_car 60>;
reset-names = "mpe";
};
vi {
......@@ -110,6 +117,8 @@
reg = <0x54080000 0x00040000>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_VI>;
resets = <&tegra_car 20>;
reset-names = "vi";
};
epp {
......@@ -117,6 +126,8 @@
reg = <0x540c0000 0x00040000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_EPP>;
resets = <&tegra_car 19>;
reset-names = "epp";
};
isp {
......@@ -124,12 +135,16 @@
reg = <0x54100000 0x00040000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_ISP>;
resets = <&tegra_car 23>;
reset-names = "isp";
};
gr2d {
compatible = "nvidia,tegra30-gr2d";
reg = <0x54140000 0x00040000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
resets = <&tegra_car 21>;
reset-names = "2d";
clocks = <&tegra_car TEGRA30_CLK_GR2D>;
};
......@@ -139,6 +154,9 @@
clocks = <&tegra_car TEGRA30_CLK_GR3D
&tegra_car TEGRA30_CLK_GR3D2>;
clock-names = "3d", "3d2";
resets = <&tegra_car 24>,
<&tegra_car 98>;
reset-names = "3d", "3d2";
};
dc@54200000 {
......@@ -147,7 +165,9 @@
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_DISP1>,
<&tegra_car TEGRA30_CLK_PLL_P>;
clock-names = "disp1", "parent";
clock-names = "dc", "parent";
resets = <&tegra_car 27>;
reset-names = "dc";
rgb {
status = "disabled";
......@@ -160,7 +180,9 @@
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_DISP2>,
<&tegra_car TEGRA30_CLK_PLL_P>;
clock-names = "disp2", "parent";
clock-names = "dc", "parent";
resets = <&tegra_car 26>;
reset-names = "dc";
rgb {
status = "disabled";
......@@ -174,6 +196,8 @@
clocks = <&tegra_car TEGRA30_CLK_HDMI>,
<&tegra_car TEGRA30_CLK_PLL_D2_OUT0>;
clock-names = "hdmi", "parent";
resets = <&tegra_car 51>;
reset-names = "hdmi";
status = "disabled";
};
......@@ -189,6 +213,8 @@
compatible = "nvidia,tegra30-dsi";
reg = <0x54300000 0x00040000>;
clocks = <&tegra_car TEGRA30_CLK_DSIA>;
resets = <&tegra_car 48>;
reset-names = "dsi";
status = "disabled";
};
};
......@@ -234,6 +260,7 @@
compatible = "nvidia,tegra30-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
apbdma: dma {
......@@ -272,6 +299,9 @@
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_APBDMA>;
resets = <&tegra_car 34>;
reset-names = "dma";
#dma-cells = <1>;
};
ahb: ahb {
......@@ -315,8 +345,11 @@
reg = <0x70006000 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 8>;
clocks = <&tegra_car TEGRA30_CLK_UARTA>;
resets = <&tegra_car 6>;
reset-names = "serial";
dmas = <&apbdma 8>, <&apbdma 8>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -325,8 +358,11 @@
reg = <0x70006040 0x40>;
reg-shift = <2>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 9>;
clocks = <&tegra_car TEGRA30_CLK_UARTB>;
resets = <&tegra_car 7>;
reset-names = "serial";
dmas = <&apbdma 9>, <&apbdma 9>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -335,8 +371,11 @@
reg = <0x70006200 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 10>;
clocks = <&tegra_car TEGRA30_CLK_UARTC>;
resets = <&tegra_car 55>;
reset-names = "serial";
dmas = <&apbdma 10>, <&apbdma 10>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -345,8 +384,11 @@
reg = <0x70006300 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 19>;
clocks = <&tegra_car TEGRA30_CLK_UARTD>;
resets = <&tegra_car 65>;
reset-names = "serial";
dmas = <&apbdma 19>, <&apbdma 19>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -355,8 +397,11 @@
reg = <0x70006400 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 20>;
clocks = <&tegra_car TEGRA30_CLK_UARTE>;
resets = <&tegra_car 66>;
reset-names = "serial";
dmas = <&apbdma 20>, <&apbdma 20>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -365,6 +410,8 @@
reg = <0x7000a000 0x100>;
#pwm-cells = <2>;
clocks = <&tegra_car TEGRA30_CLK_PWM>;
resets = <&tegra_car 17>;
reset-names = "pwm";
status = "disabled";
};
......@@ -384,6 +431,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C1>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 12>;
reset-names = "i2c";
dmas = <&apbdma 21>, <&apbdma 21>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -396,6 +447,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C2>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 54>;
reset-names = "i2c";
dmas = <&apbdma 22>, <&apbdma 22>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -408,6 +463,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C3>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
dmas = <&apbdma 23>, <&apbdma 23>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -419,7 +478,11 @@
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_I2C4>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
resets = <&tegra_car 103>;
reset-names = "i2c";
clock-names = "div-clk", "fast-clk";
dmas = <&apbdma 26>, <&apbdma 26>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -432,6 +495,10 @@
clocks = <&tegra_car TEGRA30_CLK_I2C5>,
<&tegra_car TEGRA30_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 47>;
reset-names = "i2c";
dmas = <&apbdma 24>, <&apbdma 24>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -439,10 +506,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d400 0x200>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 15>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC1>;
resets = <&tegra_car 41>;
reset-names = "spi";
dmas = <&apbdma 15>, <&apbdma 15>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -450,10 +520,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d600 0x200>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 16>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC2>;
resets = <&tegra_car 44>;
reset-names = "spi";
dmas = <&apbdma 16>, <&apbdma 16>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -461,10 +534,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000d800 0x200>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 17>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC3>;
resets = <&tegra_car 46>;
reset-names = "spi";
dmas = <&apbdma 17>, <&apbdma 17>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -472,10 +548,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000da00 0x200>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 18>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC4>;
resets = <&tegra_car 68>;
reset-names = "spi";
dmas = <&apbdma 18>, <&apbdma 18>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -483,10 +562,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000dc00 0x200>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 27>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC5>;
resets = <&tegra_car 104>;
reset-names = "spi";
dmas = <&apbdma 27>, <&apbdma 27>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -494,10 +576,13 @@
compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
reg = <0x7000de00 0x200>;
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 28>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&tegra_car TEGRA30_CLK_SBC6>;
resets = <&tegra_car 106>;
reset-names = "spi";
dmas = <&apbdma 28>, <&apbdma 28>;
dma-names = "rx", "tx";
status = "disabled";
};
......@@ -506,6 +591,8 @@
reg = <0x7000e200 0x100>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_KBC>;
resets = <&tegra_car 36>;
reset-names = "kbc";
status = "disabled";
};
......@@ -540,21 +627,29 @@
reg = <0x70080000 0x200
0x70080200 0x100>;
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
nvidia,dma-request-selector = <&apbdma 1>;
clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
<&tegra_car TEGRA30_CLK_APBIF>,
<&tegra_car TEGRA30_CLK_I2S0>,
<&tegra_car TEGRA30_CLK_I2S1>,
<&tegra_car TEGRA30_CLK_I2S2>,
<&tegra_car TEGRA30_CLK_I2S3>,
<&tegra_car TEGRA30_CLK_I2S4>,
<&tegra_car TEGRA30_CLK_DAM0>,
<&tegra_car TEGRA30_CLK_DAM1>,
<&tegra_car TEGRA30_CLK_DAM2>,
<&tegra_car TEGRA30_CLK_SPDIF_IN>;
clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
<&tegra_car TEGRA30_CLK_APBIF>;
clock-names = "d_audio", "apbif";
resets = <&tegra_car 106>, /* d_audio */
<&tegra_car 107>, /* apbif */
<&tegra_car 30>, /* i2s0 */
<&tegra_car 11>, /* i2s1 */
<&tegra_car 18>, /* i2s2 */
<&tegra_car 101>, /* i2s3 */
<&tegra_car 102>, /* i2s4 */
<&tegra_car 108>, /* dam0 */
<&tegra_car 109>, /* dam1 */
<&tegra_car 110>, /* dam2 */
<&tegra_car 10>; /* spdif */
reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
"spdif_in";
"spdif";
dmas = <&apbdma 1>, <&apbdma 1>,
<&apbdma 2>, <&apbdma 2>,
<&apbdma 3>, <&apbdma 3>,
<&apbdma 4>, <&apbdma 4>;
dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
"rx3", "tx3";
ranges;
#address-cells = <1>;
#size-cells = <1>;
......@@ -564,6 +659,8 @@
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
clocks = <&tegra_car TEGRA30_CLK_I2S0>;
resets = <&tegra_car 30>;
reset-names = "i2s";
status = "disabled";
};
......@@ -572,6 +669,8 @@
reg = <0x70080400 0x100>;
nvidia,ahub-cif-ids = <5 5>;
clocks = <&tegra_car TEGRA30_CLK_I2S1>;
resets = <&tegra_car 11>;
reset-names = "i2s";
status = "disabled";
};
......@@ -580,6 +679,8 @@
reg = <0x70080500 0x100>;
nvidia,ahub-cif-ids = <6 6>;
clocks = <&tegra_car TEGRA30_CLK_I2S2>;
resets = <&tegra_car 18>;
reset-names = "i2s";
status = "disabled";
};
......@@ -588,6 +689,8 @@
reg = <0x70080600 0x100>;
nvidia,ahub-cif-ids = <7 7>;
clocks = <&tegra_car TEGRA30_CLK_I2S3>;
resets = <&tegra_car 101>;
reset-names = "i2s";
status = "disabled";
};
......@@ -596,6 +699,8 @@
reg = <0x70080700 0x100>;
nvidia,ahub-cif-ids = <8 8>;
clocks = <&tegra_car TEGRA30_CLK_I2S4>;
resets = <&tegra_car 102>;
reset-names = "i2s";
status = "disabled";
};
};
......@@ -605,6 +710,8 @@
reg = <0x78000000 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
resets = <&tegra_car 14>;
reset-names = "sdhci";
status = "disabled";
};
......@@ -613,6 +720,8 @@
reg = <0x78000200 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
resets = <&tegra_car 9>;
reset-names = "sdhci";
status = "disabled";
};
......@@ -621,6 +730,8 @@
reg = <0x78000400 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
resets = <&tegra_car 69>;
reset-names = "sdhci";
status = "disabled";
};
......@@ -629,6 +740,8 @@
reg = <0x78000600 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
resets = <&tegra_car 15>;
reset-names = "sdhci";
status = "disabled";
};
......@@ -638,6 +751,8 @@
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USBD>;
resets = <&tegra_car 22>;
reset-names = "usb";
nvidia,needs-double-reset;
nvidia,phy = <&phy1>;
status = "disabled";
......@@ -671,6 +786,8 @@
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "ulpi";
clocks = <&tegra_car TEGRA30_CLK_USB2>;
resets = <&tegra_car 58>;
reset-names = "usb";
nvidia,phy = <&phy2>;
status = "disabled";
};
......@@ -692,6 +809,8 @@
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
phy_type = "utmi";
clocks = <&tegra_car TEGRA30_CLK_USB3>;
resets = <&tegra_car 59>;
reset-names = "usb";
nvidia,phy = <&phy3>;
status = "disabled";
};
......
......@@ -14,6 +14,8 @@ config ARCH_TEGRA
select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PINCTRL
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
select SOC_BUS
select SPARSE_IRQ
select USB_ARCH_HAS_EHCI if USB_SUPPORT
......
......@@ -25,6 +25,7 @@
#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/reset.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <linux/clk/tegra.h>
......@@ -144,11 +145,12 @@ int tegra_powergate_remove_clamping(int id)
}
/* Must be called with clk disabled, and returns with clk enabled */
int tegra_powergate_sequence_power_up(int id, struct clk *clk)
int tegra_powergate_sequence_power_up(int id, struct clk *clk,
struct reset_control *rst)
{
int ret;
tegra_periph_reset_assert(clk);
reset_control_assert(rst);
ret = tegra_powergate_power_on(id);
if (ret)
......@@ -165,7 +167,7 @@ int tegra_powergate_sequence_power_up(int id, struct clk *clk)
goto err_clamp;
udelay(10);
tegra_periph_reset_deassert(clk);
reset_control_deassert(rst);
return 0;
......
......@@ -6,7 +6,12 @@ obj-y += clk-periph-gate.o
obj-y += clk-pll.o
obj-y += clk-pll-out.o
obj-y += clk-super.o
obj-y += clk-tegra-audio.o
obj-y += clk-tegra-periph.o
obj-y += clk-tegra-pmc.o
obj-y += clk-tegra-fixed.o
obj-y += clk-tegra-super-gen4.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += clk-tegra20.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += clk-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_114_SOC) += clk-tegra114.o
obj-$(CONFIG_ARCH_TEGRA_124_SOC) += clk-tegra124.o
/*
* This header provides IDs for clocks common between several Tegra SoCs
*/
#ifndef _TEGRA_CLK_ID_H
#define _TEGRA_CLK_ID_H
enum clk_id {
tegra_clk_actmon,
tegra_clk_adx,
tegra_clk_adx1,
tegra_clk_afi,
tegra_clk_amx,
tegra_clk_amx1,
tegra_clk_apbdma,
tegra_clk_apbif,
tegra_clk_audio0,
tegra_clk_audio0_2x,
tegra_clk_audio0_mux,
tegra_clk_audio1,
tegra_clk_audio1_2x,
tegra_clk_audio1_mux,
tegra_clk_audio2,
tegra_clk_audio2_2x,
tegra_clk_audio2_mux,
tegra_clk_audio3,
tegra_clk_audio3_2x,
tegra_clk_audio3_mux,
tegra_clk_audio4,
tegra_clk_audio4_2x,
tegra_clk_audio4_mux,
tegra_clk_blink,
tegra_clk_bsea,
tegra_clk_bsev,
tegra_clk_cclk_g,
tegra_clk_cclk_lp,
tegra_clk_cilab,
tegra_clk_cilcd,
tegra_clk_cile,
tegra_clk_clk_32k,
tegra_clk_clk72Mhz,
tegra_clk_clk_m,
tegra_clk_clk_m_div2,
tegra_clk_clk_m_div4,
tegra_clk_clk_out_1,
tegra_clk_clk_out_1_mux,
tegra_clk_clk_out_2,
tegra_clk_clk_out_2_mux,
tegra_clk_clk_out_3,
tegra_clk_clk_out_3_mux,
tegra_clk_cml0,
tegra_clk_cml1,
tegra_clk_csi,
tegra_clk_csite,
tegra_clk_csus,
tegra_clk_cve,
tegra_clk_dam0,
tegra_clk_dam1,
tegra_clk_dam2,
tegra_clk_d_audio,
tegra_clk_dds,
tegra_clk_dfll_ref,
tegra_clk_dfll_soc,
tegra_clk_disp1,
tegra_clk_disp2,
tegra_clk_dp2,
tegra_clk_dpaux,
tegra_clk_dsia,
tegra_clk_dsialp,
tegra_clk_dsia_mux,
tegra_clk_dsib,
tegra_clk_dsiblp,
tegra_clk_dsib_mux,
tegra_clk_dtv,
tegra_clk_emc,
tegra_clk_entropy,
tegra_clk_epp,
tegra_clk_epp_8,
tegra_clk_extern1,
tegra_clk_extern2,
tegra_clk_extern3,
tegra_clk_fuse,
tegra_clk_fuse_burn,
tegra_clk_gpu,
tegra_clk_gr2d,
tegra_clk_gr2d_8,
tegra_clk_gr3d,
tegra_clk_gr3d_8,
tegra_clk_hclk,
tegra_clk_hda,
tegra_clk_hda2codec_2x,
tegra_clk_hda2hdmi,
tegra_clk_hdmi,
tegra_clk_hdmi_audio,
tegra_clk_host1x,
tegra_clk_host1x_8,
tegra_clk_i2c1,
tegra_clk_i2c2,
tegra_clk_i2c3,
tegra_clk_i2c4,
tegra_clk_i2c5,
tegra_clk_i2c6,
tegra_clk_i2cslow,
tegra_clk_i2s0,
tegra_clk_i2s0_sync,
tegra_clk_i2s1,
tegra_clk_i2s1_sync,
tegra_clk_i2s2,
tegra_clk_i2s2_sync,
tegra_clk_i2s3,
tegra_clk_i2s3_sync,
tegra_clk_i2s4,
tegra_clk_i2s4_sync,
tegra_clk_isp,
tegra_clk_isp_8,
tegra_clk_ispb,
tegra_clk_kbc,
tegra_clk_kfuse,
tegra_clk_la,
tegra_clk_mipi,
tegra_clk_mipi_cal,
tegra_clk_mpe,
tegra_clk_mselect,
tegra_clk_msenc,
tegra_clk_ndflash,
tegra_clk_ndflash_8,
tegra_clk_ndspeed,
tegra_clk_ndspeed_8,
tegra_clk_nor,
tegra_clk_owr,
tegra_clk_pcie,
tegra_clk_pclk,
tegra_clk_pll_a,
tegra_clk_pll_a_out0,
tegra_clk_pll_c,
tegra_clk_pll_c2,
tegra_clk_pll_c3,
tegra_clk_pll_c4,
tegra_clk_pll_c_out1,
tegra_clk_pll_d,
tegra_clk_pll_d2,
tegra_clk_pll_d2_out0,
tegra_clk_pll_d_out0,
tegra_clk_pll_dp,
tegra_clk_pll_e_out0,
tegra_clk_pll_m,
tegra_clk_pll_m_out1,
tegra_clk_pll_p,
tegra_clk_pll_p_out1,
tegra_clk_pll_p_out2,
tegra_clk_pll_p_out2_int,
tegra_clk_pll_p_out3,
tegra_clk_pll_p_out4,
tegra_clk_pll_p_out5,
tegra_clk_pll_ref,
tegra_clk_pll_re_out,
tegra_clk_pll_re_vco,
tegra_clk_pll_u,
tegra_clk_pll_u_12m,
tegra_clk_pll_u_480m,
tegra_clk_pll_u_48m,
tegra_clk_pll_u_60m,
tegra_clk_pll_x,
tegra_clk_pll_x_out0,
tegra_clk_pwm,
tegra_clk_rtc,
tegra_clk_sata,
tegra_clk_sata_cold,
tegra_clk_sata_oob,
tegra_clk_sbc1,
tegra_clk_sbc1_8,
tegra_clk_sbc2,
tegra_clk_sbc2_8,
tegra_clk_sbc3,
tegra_clk_sbc3_8,
tegra_clk_sbc4,
tegra_clk_sbc4_8,
tegra_clk_sbc5,
tegra_clk_sbc5_8,
tegra_clk_sbc6,
tegra_clk_sbc6_8,
tegra_clk_sclk,
tegra_clk_sdmmc1,
tegra_clk_sdmmc2,
tegra_clk_sdmmc3,
tegra_clk_sdmmc4,
tegra_clk_se,
tegra_clk_soc_therm,
tegra_clk_sor0,
tegra_clk_sor0_lvds,
tegra_clk_spdif,
tegra_clk_spdif_2x,
tegra_clk_spdif_in,
tegra_clk_spdif_in_sync,
tegra_clk_spdif_mux,
tegra_clk_spdif_out,
tegra_clk_timer,
tegra_clk_trace,
tegra_clk_tsec,
tegra_clk_tsensor,
tegra_clk_tvdac,
tegra_clk_tvo,
tegra_clk_uarta,
tegra_clk_uartb,
tegra_clk_uartc,
tegra_clk_uartd,
tegra_clk_uarte,
tegra_clk_usb2,
tegra_clk_usb3,
tegra_clk_usbd,
tegra_clk_vcp,
tegra_clk_vde,
tegra_clk_vde_8,
tegra_clk_vfir,
tegra_clk_vi,
tegra_clk_vi_8,
tegra_clk_vi_9,
tegra_clk_vic03,
tegra_clk_vim2_clk,
tegra_clk_vimclk_sync,
tegra_clk_vi_sensor,
tegra_clk_vi_sensor2,
tegra_clk_vi_sensor_8,
tegra_clk_xusb_dev,
tegra_clk_xusb_dev_src,
tegra_clk_xusb_falcon_src,
tegra_clk_xusb_fs_src,
tegra_clk_xusb_host,
tegra_clk_xusb_host_src,
tegra_clk_xusb_hs_src,
tegra_clk_xusb_ss,
tegra_clk_xusb_ss_src,
tegra_clk_max,
};
#endif /* _TEGRA_CLK_ID_H */
......@@ -36,8 +36,6 @@ static DEFINE_SPINLOCK(periph_ref_lock);
#define read_rst(gate) \
readl_relaxed(gate->clk_base + (gate->regs->rst_reg))
#define write_rst_set(val, gate) \
writel_relaxed(val, gate->clk_base + (gate->regs->rst_set_reg))
#define write_rst_clr(val, gate) \
writel_relaxed(val, gate->clk_base + (gate->regs->rst_clr_reg))
......@@ -123,26 +121,6 @@ static void clk_periph_disable(struct clk_hw *hw)
spin_unlock_irqrestore(&periph_ref_lock, flags);
}
void tegra_periph_reset(struct tegra_clk_periph_gate *gate, bool assert)
{
if (gate->flags & TEGRA_PERIPH_NO_RESET)
return;
if (assert) {
/*
* If peripheral is in the APB bus then read the APB bus to
* flush the write operation in apb bus. This will avoid the
* peripheral access after disabling clock
*/
if (gate->flags & TEGRA_PERIPH_ON_APB)
tegra_read_chipid();
write_rst_set(periph_clk_to_bit(gate), gate);
} else {
write_rst_clr(periph_clk_to_bit(gate), gate);
}
}
const struct clk_ops tegra_clk_periph_gate_ops = {
.is_enabled = clk_periph_is_enabled,
.enable = clk_periph_enable,
......@@ -151,12 +129,16 @@ const struct clk_ops tegra_clk_periph_gate_ops = {
struct clk *tegra_clk_register_periph_gate(const char *name,
const char *parent_name, u8 gate_flags, void __iomem *clk_base,
unsigned long flags, int clk_num,
struct tegra_clk_periph_regs *pregs, int *enable_refcnt)
unsigned long flags, int clk_num, int *enable_refcnt)
{
struct tegra_clk_periph_gate *gate;
struct clk *clk;
struct clk_init_data init;
struct tegra_clk_periph_regs *pregs;
pregs = get_reg_bank(clk_num);
if (!pregs)
return ERR_PTR(-EINVAL);
gate = kzalloc(sizeof(*gate), GFP_KERNEL);
if (!gate) {
......
......@@ -111,46 +111,6 @@ static void clk_periph_disable(struct clk_hw *hw)
gate_ops->disable(gate_hw);
}
void tegra_periph_reset_deassert(struct clk *c)
{
struct clk_hw *hw = __clk_get_hw(c);
struct tegra_clk_periph *periph = to_clk_periph(hw);
struct tegra_clk_periph_gate *gate;
if (periph->magic != TEGRA_CLK_PERIPH_MAGIC) {
gate = to_clk_periph_gate(hw);
if (gate->magic != TEGRA_CLK_PERIPH_GATE_MAGIC) {
WARN_ON(1);
return;
}
} else {
gate = &periph->gate;
}
tegra_periph_reset(gate, 0);
}
EXPORT_SYMBOL(tegra_periph_reset_deassert);
void tegra_periph_reset_assert(struct clk *c)
{
struct clk_hw *hw = __clk_get_hw(c);
struct tegra_clk_periph *periph = to_clk_periph(hw);
struct tegra_clk_periph_gate *gate;
if (periph->magic != TEGRA_CLK_PERIPH_MAGIC) {
gate = to_clk_periph_gate(hw);
if (gate->magic != TEGRA_CLK_PERIPH_GATE_MAGIC) {
WARN_ON(1);
return;
}
} else {
gate = &periph->gate;
}
tegra_periph_reset(gate, 1);
}
EXPORT_SYMBOL(tegra_periph_reset_assert);
const struct clk_ops tegra_clk_periph_ops = {
.get_parent = clk_periph_get_parent,
.set_parent = clk_periph_set_parent,
......@@ -170,27 +130,50 @@ const struct clk_ops tegra_clk_periph_nodiv_ops = {
.disable = clk_periph_disable,
};
const struct clk_ops tegra_clk_periph_no_gate_ops = {
.get_parent = clk_periph_get_parent,
.set_parent = clk_periph_set_parent,
.recalc_rate = clk_periph_recalc_rate,
.round_rate = clk_periph_round_rate,
.set_rate = clk_periph_set_rate,
};
static struct clk *_tegra_clk_register_periph(const char *name,
const char **parent_names, int num_parents,
struct tegra_clk_periph *periph,
void __iomem *clk_base, u32 offset, bool div,
void __iomem *clk_base, u32 offset,
unsigned long flags)
{
struct clk *clk;
struct clk_init_data init;
struct tegra_clk_periph_regs *bank;
bool div = !(periph->gate.flags & TEGRA_PERIPH_NO_DIV);
if (periph->gate.flags & TEGRA_PERIPH_NO_DIV) {
flags |= CLK_SET_RATE_PARENT;
init.ops = &tegra_clk_periph_nodiv_ops;
} else if (periph->gate.flags & TEGRA_PERIPH_NO_GATE)
init.ops = &tegra_clk_periph_no_gate_ops;
else
init.ops = &tegra_clk_periph_ops;
init.name = name;
init.ops = div ? &tegra_clk_periph_ops : &tegra_clk_periph_nodiv_ops;
init.flags = flags;
init.parent_names = parent_names;
init.num_parents = num_parents;
bank = get_reg_bank(periph->gate.clk_num);
if (!bank)
return ERR_PTR(-EINVAL);
/* Data in .init is copied by clk_register(), so stack variable OK */
periph->hw.init = &init;
periph->magic = TEGRA_CLK_PERIPH_MAGIC;
periph->mux.reg = clk_base + offset;
periph->divider.reg = div ? (clk_base + offset) : NULL;
periph->gate.clk_base = clk_base;
periph->gate.regs = bank;
periph->gate.enable_refcnt = periph_clk_enb_refcnt;
clk = clk_register(NULL, &periph->hw);
if (IS_ERR(clk))
......@@ -209,7 +192,7 @@ struct clk *tegra_clk_register_periph(const char *name,
u32 offset, unsigned long flags)
{
return _tegra_clk_register_periph(name, parent_names, num_parents,
periph, clk_base, offset, true, flags);
periph, clk_base, offset, flags);
}
struct clk *tegra_clk_register_periph_nodiv(const char *name,
......@@ -217,6 +200,7 @@ struct clk *tegra_clk_register_periph_nodiv(const char *name,
struct tegra_clk_periph *periph, void __iomem *clk_base,
u32 offset)
{
periph->gate.flags |= TEGRA_PERIPH_NO_DIV;
return _tegra_clk_register_periph(name, parent_names, num_parents,
periph, clk_base, offset, false, CLK_SET_RATE_PARENT);
periph, clk_base, offset, CLK_SET_RATE_PARENT);
}
此差异已折叠。
/*
* Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/clk/tegra.h>
#include "clk.h"
#include "clk-id.h"
#define AUDIO_SYNC_CLK_I2S0 0x4a0
#define AUDIO_SYNC_CLK_I2S1 0x4a4
#define AUDIO_SYNC_CLK_I2S2 0x4a8
#define AUDIO_SYNC_CLK_I2S3 0x4ac
#define AUDIO_SYNC_CLK_I2S4 0x4b0
#define AUDIO_SYNC_CLK_SPDIF 0x4b4
#define AUDIO_SYNC_DOUBLER 0x49c
#define PLLA_OUT 0xb4
struct tegra_sync_source_initdata {
char *name;
unsigned long rate;
unsigned long max_rate;
int clk_id;
};
#define SYNC(_name) \
{\
.name = #_name,\
.rate = 24000000,\
.max_rate = 24000000,\
.clk_id = tegra_clk_ ## _name,\
}
struct tegra_audio_clk_initdata {
char *gate_name;
char *mux_name;
u32 offset;
int gate_clk_id;
int mux_clk_id;
};
#define AUDIO(_name, _offset) \
{\
.gate_name = #_name,\
.mux_name = #_name"_mux",\
.offset = _offset,\
.gate_clk_id = tegra_clk_ ## _name,\
.mux_clk_id = tegra_clk_ ## _name ## _mux,\
}
struct tegra_audio2x_clk_initdata {
char *parent;
char *gate_name;
char *name_2x;
char *div_name;
int clk_id;
int clk_num;
u8 div_offset;
};
#define AUDIO2X(_name, _num, _offset) \
{\
.parent = #_name,\
.gate_name = #_name"_2x",\
.name_2x = #_name"_doubler",\
.div_name = #_name"_div",\
.clk_id = tegra_clk_ ## _name ## _2x,\
.clk_num = _num,\
.div_offset = _offset,\
}
static DEFINE_SPINLOCK(clk_doubler_lock);
static const char *mux_audio_sync_clk[] = { "spdif_in_sync", "i2s0_sync",
"i2s1_sync", "i2s2_sync", "i2s3_sync", "i2s4_sync", "vimclk_sync",
};
static struct tegra_sync_source_initdata sync_source_clks[] __initdata = {
SYNC(spdif_in_sync),
SYNC(i2s0_sync),
SYNC(i2s1_sync),
SYNC(i2s2_sync),
SYNC(i2s3_sync),
SYNC(i2s4_sync),
SYNC(vimclk_sync),
};
static struct tegra_audio_clk_initdata audio_clks[] = {
AUDIO(audio0, AUDIO_SYNC_CLK_I2S0),
AUDIO(audio1, AUDIO_SYNC_CLK_I2S1),
AUDIO(audio2, AUDIO_SYNC_CLK_I2S2),
AUDIO(audio3, AUDIO_SYNC_CLK_I2S3),
AUDIO(audio4, AUDIO_SYNC_CLK_I2S4),
AUDIO(spdif, AUDIO_SYNC_CLK_SPDIF),
};
static struct tegra_audio2x_clk_initdata audio2x_clks[] = {
AUDIO2X(audio0, 113, 24),
AUDIO2X(audio1, 114, 25),
AUDIO2X(audio2, 115, 26),
AUDIO2X(audio3, 116, 27),
AUDIO2X(audio4, 117, 28),
AUDIO2X(spdif, 118, 29),
};
void __init tegra_audio_clk_init(void __iomem *clk_base,
void __iomem *pmc_base, struct tegra_clk *tegra_clks,
struct tegra_clk_pll_params *pll_a_params)
{
struct clk *clk;
struct clk **dt_clk;
int i;
/* PLLA */
dt_clk = tegra_lookup_dt_id(tegra_clk_pll_a, tegra_clks);
if (dt_clk) {
clk = tegra_clk_register_pll("pll_a", "pll_p_out1", clk_base,
pmc_base, 0, pll_a_params, NULL);
*dt_clk = clk;
}
/* PLLA_OUT0 */
dt_clk = tegra_lookup_dt_id(tegra_clk_pll_a_out0, tegra_clks);
if (dt_clk) {
clk = tegra_clk_register_divider("pll_a_out0_div", "pll_a",
clk_base + PLLA_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
8, 8, 1, NULL);
clk = tegra_clk_register_pll_out("pll_a_out0", "pll_a_out0_div",
clk_base + PLLA_OUT, 1, 0, CLK_IGNORE_UNUSED |
CLK_SET_RATE_PARENT, 0, NULL);
*dt_clk = clk;
}
for (i = 0; i < ARRAY_SIZE(sync_source_clks); i++) {
struct tegra_sync_source_initdata *data;
data = &sync_source_clks[i];
dt_clk = tegra_lookup_dt_id(data->clk_id, tegra_clks);
if (!dt_clk)
continue;
clk = tegra_clk_register_sync_source(data->name,
data->rate, data->max_rate);
*dt_clk = clk;
}
for (i = 0; i < ARRAY_SIZE(audio_clks); i++) {
struct tegra_audio_clk_initdata *data;
data = &audio_clks[i];
dt_clk = tegra_lookup_dt_id(data->mux_clk_id, tegra_clks);
if (!dt_clk)
continue;
clk = clk_register_mux(NULL, data->mux_name, mux_audio_sync_clk,
ARRAY_SIZE(mux_audio_sync_clk),
CLK_SET_RATE_NO_REPARENT,
clk_base + data->offset, 0, 3, 0,
NULL);
*dt_clk = clk;
dt_clk = tegra_lookup_dt_id(data->gate_clk_id, tegra_clks);
if (!dt_clk)
continue;
clk = clk_register_gate(NULL, data->gate_name, data->mux_name,
0, clk_base + data->offset, 4,
CLK_GATE_SET_TO_DISABLE, NULL);
*dt_clk = clk;
}
for (i = 0; i < ARRAY_SIZE(audio2x_clks); i++) {
struct tegra_audio2x_clk_initdata *data;
data = &audio2x_clks[i];
dt_clk = tegra_lookup_dt_id(data->clk_id, tegra_clks);
if (!dt_clk)
continue;
clk = clk_register_fixed_factor(NULL, data->name_2x,
data->parent, CLK_SET_RATE_PARENT, 2, 1);
clk = tegra_clk_register_divider(data->div_name,
data->name_2x, clk_base + AUDIO_SYNC_DOUBLER,
0, 0, data->div_offset, 1, 0,
&clk_doubler_lock);
clk = tegra_clk_register_periph_gate(data->gate_name,
data->div_name, TEGRA_PERIPH_NO_RESET,
clk_base, CLK_SET_RATE_PARENT, data->clk_num,
periph_clk_enb_refcnt);
*dt_clk = clk;
}
}
/*
* Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/clk/tegra.h>
#include "clk.h"
#include "clk-id.h"
#define OSC_CTRL 0x50
#define OSC_CTRL_OSC_FREQ_SHIFT 28
#define OSC_CTRL_PLL_REF_DIV_SHIFT 26
int __init tegra_osc_clk_init(void __iomem *clk_base,
struct tegra_clk *tegra_clks,
unsigned long *input_freqs, int num,
unsigned long *osc_freq,
unsigned long *pll_ref_freq)
{
struct clk *clk;
struct clk **dt_clk;
u32 val, pll_ref_div;
unsigned osc_idx;
val = readl_relaxed(clk_base + OSC_CTRL);
osc_idx = val >> OSC_CTRL_OSC_FREQ_SHIFT;
if (osc_idx < num)
*osc_freq = input_freqs[osc_idx];
else
*osc_freq = 0;
if (!*osc_freq) {
WARN_ON(1);
return -EINVAL;
}
dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m, tegra_clks);
if (!dt_clk)
return 0;
clk = clk_register_fixed_rate(NULL, "clk_m", NULL, CLK_IS_ROOT,
*osc_freq);
*dt_clk = clk;
/* pll_ref */
val = (val >> OSC_CTRL_PLL_REF_DIV_SHIFT) & 3;
pll_ref_div = 1 << val;
dt_clk = tegra_lookup_dt_id(tegra_clk_pll_ref, tegra_clks);
if (!dt_clk)
return 0;
clk = clk_register_fixed_factor(NULL, "pll_ref", "clk_m",
0, 1, pll_ref_div);
*dt_clk = clk;
if (pll_ref_freq)
*pll_ref_freq = *osc_freq / pll_ref_div;
return 0;
}
void __init tegra_fixed_clk_init(struct tegra_clk *tegra_clks)
{
struct clk *clk;
struct clk **dt_clk;
/* clk_32k */
dt_clk = tegra_lookup_dt_id(tegra_clk_clk_32k, tegra_clks);
if (dt_clk) {
clk = clk_register_fixed_rate(NULL, "clk_32k", NULL,
CLK_IS_ROOT, 32768);
*dt_clk = clk;
}
/* clk_m_div2 */
dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m_div2, tegra_clks);
if (dt_clk) {
clk = clk_register_fixed_factor(NULL, "clk_m_div2", "clk_m",
CLK_SET_RATE_PARENT, 1, 2);
*dt_clk = clk;
}
/* clk_m_div4 */
dt_clk = tegra_lookup_dt_id(tegra_clk_clk_m_div4, tegra_clks);
if (dt_clk) {
clk = clk_register_fixed_factor(NULL, "clk_m_div4", "clk_m",
CLK_SET_RATE_PARENT, 1, 4);
*dt_clk = clk;
}
}
此差异已折叠。
/*
* Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/clk/tegra.h>
#include "clk.h"
#include "clk-id.h"
#define PMC_CLK_OUT_CNTRL 0x1a8
#define PMC_DPD_PADS_ORIDE 0x1c
#define PMC_DPD_PADS_ORIDE_BLINK_ENB 20
#define PMC_CTRL 0
#define PMC_CTRL_BLINK_ENB 7
#define PMC_BLINK_TIMER 0x40
struct pmc_clk_init_data {
char *mux_name;
char *gate_name;
const char **parents;
int num_parents;
int mux_id;
int gate_id;
char *dev_name;
u8 mux_shift;
u8 gate_shift;
};
#define PMC_CLK(_num, _mux_shift, _gate_shift)\
{\
.mux_name = "clk_out_" #_num "_mux",\
.gate_name = "clk_out_" #_num,\
.parents = clk_out ##_num ##_parents,\
.num_parents = ARRAY_SIZE(clk_out ##_num ##_parents),\
.mux_id = tegra_clk_clk_out_ ##_num ##_mux,\
.gate_id = tegra_clk_clk_out_ ##_num,\
.dev_name = "extern" #_num,\
.mux_shift = _mux_shift,\
.gate_shift = _gate_shift,\
}
static DEFINE_SPINLOCK(clk_out_lock);
static const char *clk_out1_parents[] = { "clk_m", "clk_m_div2",
"clk_m_div4", "extern1",
};
static const char *clk_out2_parents[] = { "clk_m", "clk_m_div2",
"clk_m_div4", "extern2",
};
static const char *clk_out3_parents[] = { "clk_m", "clk_m_div2",
"clk_m_div4", "extern3",
};
static struct pmc_clk_init_data pmc_clks[] = {
PMC_CLK(1, 6, 2),
PMC_CLK(2, 14, 10),
PMC_CLK(3, 22, 18),
};
void __init tegra_pmc_clk_init(void __iomem *pmc_base,
struct tegra_clk *tegra_clks)
{
struct clk *clk;
struct clk **dt_clk;
int i;
for (i = 0; i < ARRAY_SIZE(pmc_clks); i++) {
struct pmc_clk_init_data *data;
data = pmc_clks + i;
dt_clk = tegra_lookup_dt_id(data->mux_id, tegra_clks);
if (!dt_clk)
continue;
clk = clk_register_mux(NULL, data->mux_name, data->parents,
data->num_parents, CLK_SET_RATE_NO_REPARENT,
pmc_base + PMC_CLK_OUT_CNTRL, data->mux_shift,
3, 0, &clk_out_lock);
*dt_clk = clk;
dt_clk = tegra_lookup_dt_id(data->gate_id, tegra_clks);
if (!dt_clk)
continue;
clk = clk_register_gate(NULL, data->gate_name, data->mux_name,
0, pmc_base + PMC_CLK_OUT_CNTRL,
data->gate_shift, 0, &clk_out_lock);
*dt_clk = clk;
clk_register_clkdev(clk, data->dev_name, data->gate_name);
}
/* blink */
writel_relaxed(0, pmc_base + PMC_BLINK_TIMER);
clk = clk_register_gate(NULL, "blink_override", "clk_32k", 0,
pmc_base + PMC_DPD_PADS_ORIDE,
PMC_DPD_PADS_ORIDE_BLINK_ENB, 0, NULL);
dt_clk = tegra_lookup_dt_id(tegra_clk_blink, tegra_clks);
if (!dt_clk)
return;
clk = clk_register_gate(NULL, "blink", "blink_override", 0,
pmc_base + PMC_CTRL,
PMC_CTRL_BLINK_ENB, 0, NULL);
clk_register_clkdev(clk, "blink", NULL);
*dt_clk = clk;
}
/*
* Copyright (c) 2012, 2013, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/clk/tegra.h>
#include "clk.h"
#include "clk-id.h"
#define PLLX_BASE 0xe0
#define PLLX_MISC 0xe4
#define PLLX_MISC2 0x514
#define PLLX_MISC3 0x518
#define CCLKG_BURST_POLICY 0x368
#define CCLKLP_BURST_POLICY 0x370
#define SCLK_BURST_POLICY 0x028
#define SYSTEM_CLK_RATE 0x030
static DEFINE_SPINLOCK(sysrate_lock);
static const char *sclk_parents[] = { "clk_m", "pll_c_out1", "pll_p_out4",
"pll_p", "pll_p_out2", "unused",
"clk_32k", "pll_m_out1" };
static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
"pll_p", "pll_p_out4", "unused",
"unused", "pll_x" };
static const char *cclk_lp_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
"pll_p", "pll_p_out4", "unused",
"unused", "pll_x", "pll_x_out0" };
static void __init tegra_sclk_init(void __iomem *clk_base,
struct tegra_clk *tegra_clks)
{
struct clk *clk;
struct clk **dt_clk;
/* SCLK */
dt_clk = tegra_lookup_dt_id(tegra_clk_sclk, tegra_clks);
if (dt_clk) {
clk = tegra_clk_register_super_mux("sclk", sclk_parents,
ARRAY_SIZE(sclk_parents),
CLK_SET_RATE_PARENT,
clk_base + SCLK_BURST_POLICY,
0, 4, 0, 0, NULL);
*dt_clk = clk;
}
/* HCLK */
dt_clk = tegra_lookup_dt_id(tegra_clk_hclk, tegra_clks);
if (dt_clk) {
clk = clk_register_divider(NULL, "hclk_div", "sclk", 0,
clk_base + SYSTEM_CLK_RATE, 4, 2, 0,
&sysrate_lock);
clk = clk_register_gate(NULL, "hclk", "hclk_div",
CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
clk_base + SYSTEM_CLK_RATE,
7, CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
*dt_clk = clk;
}
/* PCLK */
dt_clk = tegra_lookup_dt_id(tegra_clk_pclk, tegra_clks);
if (!dt_clk)
return;
clk = clk_register_divider(NULL, "pclk_div", "hclk", 0,
clk_base + SYSTEM_CLK_RATE, 0, 2, 0,
&sysrate_lock);
clk = clk_register_gate(NULL, "pclk", "pclk_div", CLK_SET_RATE_PARENT |
CLK_IGNORE_UNUSED, clk_base + SYSTEM_CLK_RATE,
3, CLK_GATE_SET_TO_DISABLE, &sysrate_lock);
*dt_clk = clk;
}
void __init tegra_super_clk_gen4_init(void __iomem *clk_base,
void __iomem *pmc_base,
struct tegra_clk *tegra_clks,
struct tegra_clk_pll_params *params)
{
struct clk *clk;
struct clk **dt_clk;
/* CCLKG */
dt_clk = tegra_lookup_dt_id(tegra_clk_cclk_g, tegra_clks);
if (dt_clk) {
clk = tegra_clk_register_super_mux("cclk_g", cclk_g_parents,
ARRAY_SIZE(cclk_g_parents),
CLK_SET_RATE_PARENT,
clk_base + CCLKG_BURST_POLICY,
0, 4, 0, 0, NULL);
*dt_clk = clk;
}
/* CCLKLP */
dt_clk = tegra_lookup_dt_id(tegra_clk_cclk_lp, tegra_clks);
if (dt_clk) {
clk = tegra_clk_register_super_mux("cclk_lp", cclk_lp_parents,
ARRAY_SIZE(cclk_lp_parents),
CLK_SET_RATE_PARENT,
clk_base + CCLKLP_BURST_POLICY,
0, 4, 8, 9, NULL);
*dt_clk = clk;
}
tegra_sclk_init(clk_base, tegra_clks);
#if defined(CONFIG_ARCH_TEGRA_114_SOC) || defined(CONFIG_ARCH_TEGRA_124_SOC)
/* PLLX */
dt_clk = tegra_lookup_dt_id(tegra_clk_pll_x, tegra_clks);
if (!dt_clk)
return;
clk = tegra_clk_register_pllxc("pll_x", "pll_ref", clk_base,
pmc_base, CLK_IGNORE_UNUSED, params, NULL);
*dt_clk = clk;
/* PLLX_OUT0 */
dt_clk = tegra_lookup_dt_id(tegra_clk_pll_x_out0, tegra_clks);
if (!dt_clk)
return;
clk = clk_register_fixed_factor(NULL, "pll_x_out0", "pll_x",
CLK_SET_RATE_PARENT, 1, 2);
*dt_clk = clk;
#endif
}
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
......@@ -18,13 +18,175 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/clk/tegra.h>
#include <linux/reset-controller.h>
#include <linux/tegra-soc.h>
#include "clk.h"
#define CLK_OUT_ENB_L 0x010
#define CLK_OUT_ENB_H 0x014
#define CLK_OUT_ENB_U 0x018
#define CLK_OUT_ENB_V 0x360
#define CLK_OUT_ENB_W 0x364
#define CLK_OUT_ENB_X 0x280
#define CLK_OUT_ENB_SET_L 0x320
#define CLK_OUT_ENB_CLR_L 0x324
#define CLK_OUT_ENB_SET_H 0x328
#define CLK_OUT_ENB_CLR_H 0x32c
#define CLK_OUT_ENB_SET_U 0x330
#define CLK_OUT_ENB_CLR_U 0x334
#define CLK_OUT_ENB_SET_V 0x440
#define CLK_OUT_ENB_CLR_V 0x444
#define CLK_OUT_ENB_SET_W 0x448
#define CLK_OUT_ENB_CLR_W 0x44c
#define CLK_OUT_ENB_SET_X 0x284
#define CLK_OUT_ENB_CLR_X 0x288
#define RST_DEVICES_L 0x004
#define RST_DEVICES_H 0x008
#define RST_DEVICES_U 0x00C
#define RST_DFLL_DVCO 0x2F4
#define RST_DEVICES_V 0x358
#define RST_DEVICES_W 0x35C
#define RST_DEVICES_X 0x28C
#define RST_DEVICES_SET_L 0x300
#define RST_DEVICES_CLR_L 0x304
#define RST_DEVICES_SET_H 0x308
#define RST_DEVICES_CLR_H 0x30c
#define RST_DEVICES_SET_U 0x310
#define RST_DEVICES_CLR_U 0x314
#define RST_DEVICES_SET_V 0x430
#define RST_DEVICES_CLR_V 0x434
#define RST_DEVICES_SET_W 0x438
#define RST_DEVICES_CLR_W 0x43c
#define RST_DEVICES_SET_X 0x290
#define RST_DEVICES_CLR_X 0x294
/* Global data of Tegra CPU CAR ops */
static struct tegra_cpu_car_ops dummy_car_ops;
struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops;
int *periph_clk_enb_refcnt;
static int periph_banks;
static struct clk **clks;
static int clk_num;
static struct clk_onecell_data clk_data;
static struct tegra_clk_periph_regs periph_regs[] = {
[0] = {
.enb_reg = CLK_OUT_ENB_L,
.enb_set_reg = CLK_OUT_ENB_SET_L,
.enb_clr_reg = CLK_OUT_ENB_CLR_L,
.rst_reg = RST_DEVICES_L,
.rst_set_reg = RST_DEVICES_SET_L,
.rst_clr_reg = RST_DEVICES_CLR_L,
},
[1] = {
.enb_reg = CLK_OUT_ENB_H,
.enb_set_reg = CLK_OUT_ENB_SET_H,
.enb_clr_reg = CLK_OUT_ENB_CLR_H,
.rst_reg = RST_DEVICES_H,
.rst_set_reg = RST_DEVICES_SET_H,
.rst_clr_reg = RST_DEVICES_CLR_H,
},
[2] = {
.enb_reg = CLK_OUT_ENB_U,
.enb_set_reg = CLK_OUT_ENB_SET_U,
.enb_clr_reg = CLK_OUT_ENB_CLR_U,
.rst_reg = RST_DEVICES_U,
.rst_set_reg = RST_DEVICES_SET_U,
.rst_clr_reg = RST_DEVICES_CLR_U,
},
[3] = {
.enb_reg = CLK_OUT_ENB_V,
.enb_set_reg = CLK_OUT_ENB_SET_V,
.enb_clr_reg = CLK_OUT_ENB_CLR_V,
.rst_reg = RST_DEVICES_V,
.rst_set_reg = RST_DEVICES_SET_V,
.rst_clr_reg = RST_DEVICES_CLR_V,
},
[4] = {
.enb_reg = CLK_OUT_ENB_W,
.enb_set_reg = CLK_OUT_ENB_SET_W,
.enb_clr_reg = CLK_OUT_ENB_CLR_W,
.rst_reg = RST_DEVICES_W,
.rst_set_reg = RST_DEVICES_SET_W,
.rst_clr_reg = RST_DEVICES_CLR_W,
},
[5] = {
.enb_reg = CLK_OUT_ENB_X,
.enb_set_reg = CLK_OUT_ENB_SET_X,
.enb_clr_reg = CLK_OUT_ENB_CLR_X,
.rst_reg = RST_DEVICES_X,
.rst_set_reg = RST_DEVICES_SET_X,
.rst_clr_reg = RST_DEVICES_CLR_X,
},
};
static void __iomem *clk_base;
static int tegra_clk_rst_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
/*
* If peripheral is on the APB bus then we must read the APB bus to
* flush the write operation in apb bus. This will avoid peripheral
* access after disabling clock. Since the reset driver has no
* knowledge of which reset IDs represent which devices, simply do
* this all the time.
*/
tegra_read_chipid();
writel_relaxed(BIT(id % 32),
clk_base + periph_regs[id / 32].rst_set_reg);
return 0;
}
static int tegra_clk_rst_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
writel_relaxed(BIT(id % 32),
clk_base + periph_regs[id / 32].rst_clr_reg);
return 0;
}
struct tegra_clk_periph_regs *get_reg_bank(int clkid)
{
int reg_bank = clkid / 32;
if (reg_bank < periph_banks)
return &periph_regs[reg_bank];
else {
WARN_ON(1);
return NULL;
}
}
struct clk ** __init tegra_clk_init(void __iomem *regs, int num, int banks)
{
clk_base = regs;
if (WARN_ON(banks > ARRAY_SIZE(periph_regs)))
return NULL;
periph_clk_enb_refcnt = kzalloc(32 * banks *
sizeof(*periph_clk_enb_refcnt), GFP_KERNEL);
if (!periph_clk_enb_refcnt)
return NULL;
periph_banks = banks;
clks = kzalloc(num * sizeof(struct clk *), GFP_KERNEL);
if (!clks)
kfree(periph_clk_enb_refcnt);
clk_num = num;
return clks;
}
void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
struct clk *clks[], int clk_max)
{
......@@ -74,6 +236,58 @@ void __init tegra_init_from_table(struct tegra_clk_init_table *tbl,
}
}
static struct reset_control_ops rst_ops = {
.assert = tegra_clk_rst_assert,
.deassert = tegra_clk_rst_deassert,
};
static struct reset_controller_dev rst_ctlr = {
.ops = &rst_ops,
.owner = THIS_MODULE,
.of_reset_n_cells = 1,
};
void __init tegra_add_of_provider(struct device_node *np)
{
int i;
for (i = 0; i < clk_num; i++) {
if (IS_ERR(clks[i])) {
pr_err
("Tegra clk %d: register failed with %ld\n",
i, PTR_ERR(clks[i]));
}
if (!clks[i])
clks[i] = ERR_PTR(-EINVAL);
}
clk_data.clks = clks;
clk_data.clk_num = clk_num;
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
rst_ctlr.of_node = np;
rst_ctlr.nr_resets = clk_num * 32;
reset_controller_register(&rst_ctlr);
}
void __init tegra_register_devclks(struct tegra_devclk *dev_clks, int num)
{
int i;
for (i = 0; i < num; i++, dev_clks++)
clk_register_clkdev(clks[dev_clks->dt_id], dev_clks->con_id,
dev_clks->dev_id);
}
struct clk ** __init tegra_lookup_dt_id(int clk_id,
struct tegra_clk *tegra_clk)
{
if (tegra_clk[clk_id].present)
return &clks[tegra_clk[clk_id].dt_id];
else
return NULL;
}
tegra_clk_apply_init_table_func tegra_clk_apply_init_table;
void __init tegra_clocks_apply_init_table(void)
......
此差异已折叠。
此差异已折叠。
......@@ -893,33 +893,17 @@ static struct dma_chan *mmp_pdma_dma_xlate(struct of_phandle_args *dma_spec,
struct of_dma *ofdma)
{
struct mmp_pdma_device *d = ofdma->of_dma_data;
struct dma_chan *chan, *candidate;
struct dma_chan *chan;
struct mmp_pdma_chan *c;
retry:
candidate = NULL;
/* walk the list of channels registered with the current instance and
* find one that is currently unused */
list_for_each_entry(chan, &d->device.channels, device_node)
if (chan->client_count == 0) {
candidate = chan;
break;
}
if (!candidate)
chan = dma_get_any_slave_channel(&d->device);
if (!chan)
return NULL;
/* dma_get_slave_channel will return NULL if we lost a race between
* the lookup and the reservation */
chan = dma_get_slave_channel(candidate);
if (chan) {
struct mmp_pdma_chan *c = to_mmp_pdma_chan(chan);
c->drcmr = dma_spec->args[0];
return chan;
}
c = to_mmp_pdma_chan(chan);
c->drcmr = dma_spec->args[0];
goto retry;
return chan;
}
static int mmp_pdma_probe(struct platform_device *op)
......
此差异已折叠。
此差异已折叠。
......@@ -2,6 +2,7 @@ config DRM_TEGRA
bool "NVIDIA Tegra DRM"
depends on ARCH_TEGRA || ARCH_MULTIPLATFORM
depends on DRM
depends on RESET_CONTROLLER
select TEGRA_HOST1X
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
......
......@@ -8,8 +8,8 @@
*/
#include <linux/clk.h>
#include <linux/clk/tegra.h>
#include <linux/debugfs.h>
#include <linux/reset.h>
#include "dc.h"
#include "drm.h"
......@@ -712,7 +712,7 @@ static void tegra_crtc_prepare(struct drm_crtc *crtc)
unsigned long value;
/* hardware initialization */
tegra_periph_reset_deassert(dc->clk);
reset_control_deassert(dc->rst);
usleep_range(10000, 20000);
if (dc->pipe)
......@@ -1187,6 +1187,12 @@ static int tegra_dc_probe(struct platform_device *pdev)
return PTR_ERR(dc->clk);
}
dc->rst = devm_reset_control_get(&pdev->dev, "dc");
if (IS_ERR(dc->rst)) {
dev_err(&pdev->dev, "failed to get reset\n");
return PTR_ERR(dc->rst);
}
err = clk_prepare_enable(dc->clk);
if (err < 0)
return err;
......
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
......@@ -92,7 +92,7 @@
#define TEGRA20_CLK_OWR 71
#define TEGRA20_CLK_AFI 72
#define TEGRA20_CLK_CSITE 73
#define TEGRA20_CLK_PCIE_XCLK 74
/* 74 */
#define TEGRA20_CLK_AVPUCQ 75
#define TEGRA20_CLK_LA 76
/* 77 */
......
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册