提交 afde1312 编写于 作者: F Fabio Estevam 提交者: Shawn Guo

ARM: dts: imx27: Adjust the GPT compatible string

include/soc/imx/timer.h describes well the different versions of
the GPT block among the imx family:

enum imx_gpt_type {
	GPT_TYPE_IMX1,		/* i.MX1 */
	GPT_TYPE_IMX21,		/* i.MX21/27 */
	GPT_TYPE_IMX31,		/* i.MX31/35/25/37/51/6Q */
	GPT_TYPE_IMX6DL,	/* i.MX6DL/SX/SL */
};

So the proper compatible string for the MX27 case should be
"fsl,imx21-gpt".
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
上级 d770e558
......@@ -108,7 +108,7 @@
};
gpt1: timer@10003000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10003000 0x1000>;
interrupts = <26>;
clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
......@@ -117,7 +117,7 @@
};
gpt2: timer@10004000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10004000 0x1000>;
interrupts = <25>;
clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
......@@ -126,7 +126,7 @@
};
gpt3: timer@10005000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10005000 0x1000>;
interrupts = <24>;
clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
......@@ -376,7 +376,7 @@
};
gpt4: timer@10019000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x10019000 0x1000>;
interrupts = <4>;
clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
......@@ -385,7 +385,7 @@
};
gpt5: timer@1001a000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x1001a000 0x1000>;
interrupts = <3>;
clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
......@@ -436,7 +436,7 @@
};
gpt6: timer@1001f000 {
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
reg = <0x1001f000 0x1000>;
interrupts = <2>;
clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册