[PATCH] sky2: PHY power on delays

The documentation says we need to wait after turning on the PHY.
Also, don't enable WOL by default.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

drivers/net/sky2.c

@@ -234,7 +234,6 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		}
 
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-			sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
 			sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 			reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
 			reg1 &= P_ASPM_CONTROL_MSK;
@@ -243,6 +242,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		}
 
 		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+		udelay(100);
 
 		break;
 
@@ -255,6 +255,7 @@ static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		else
 			reg1 |= (PCI_Y2_PHY1_POWD | PCI_Y2_PHY2_POWD);
 		sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+		udelay(100);
 
 		if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
 			sky2_write8(hw, B2_Y2_CLK_GATE, 0);