提交 af40da89 编写于 作者: V Vladimir Sokolovsky 提交者: Roland Dreier

IPoIB: add LRO support

Add "ipoib_use_lro" module parameter to enable LRO and an
"ipoib_lro_max_aggr" module parameter to set the max number of packets
to be aggregated.  Make LRO controllable and LRO statistics accessible
through ethtool.
Signed-off-by: NVladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
上级 12406734
config INFINIBAND_IPOIB
tristate "IP-over-InfiniBand"
depends on NETDEVICES && INET && (IPV6 || IPV6=n)
select INET_LRO
---help---
Support for the IP-over-InfiniBand protocol (IPoIB). This
transports IP packets over InfiniBand so you can use your IB
......
......@@ -50,6 +50,7 @@
#include <rdma/ib_verbs.h>
#include <rdma/ib_pack.h>
#include <rdma/ib_sa.h>
#include <linux/inet_lro.h>
/* constants */
......@@ -94,6 +95,9 @@ enum {
IPOIB_MCAST_FLAG_BUSY = 2, /* joining or already joined */
IPOIB_MCAST_FLAG_ATTACHED = 3,
IPOIB_MAX_LRO_DESCRIPTORS = 8,
IPOIB_LRO_MAX_AGGR = 64,
MAX_SEND_CQE = 16,
IPOIB_CM_COPYBREAK = 256,
};
......@@ -248,6 +252,11 @@ struct ipoib_ethtool_st {
u16 max_coalesced_frames;
};
struct ipoib_lro {
struct net_lro_mgr lro_mgr;
struct net_lro_desc lro_desc[IPOIB_MAX_LRO_DESCRIPTORS];
};
/*
* Device private locking: tx_lock protects members used in TX fast
* path (and we use LLTX so upper layers don't do extra locking).
......@@ -334,6 +343,8 @@ struct ipoib_dev_priv {
int hca_caps;
struct ipoib_ethtool_st ethtool;
struct timer_list poll_timer;
struct ipoib_lro lro;
};
struct ipoib_ah {
......
......@@ -86,11 +86,57 @@ static int ipoib_set_coalesce(struct net_device *dev,
return 0;
}
static const char ipoib_stats_keys[][ETH_GSTRING_LEN] = {
"LRO aggregated", "LRO flushed",
"LRO avg aggr", "LRO no desc"
};
static void ipoib_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
{
switch (stringset) {
case ETH_SS_STATS:
memcpy(data, *ipoib_stats_keys, sizeof(ipoib_stats_keys));
break;
}
}
static int ipoib_get_sset_count(struct net_device *dev, int sset)
{
switch (sset) {
case ETH_SS_STATS:
return ARRAY_SIZE(ipoib_stats_keys);
default:
return -EOPNOTSUPP;
}
}
static void ipoib_get_ethtool_stats(struct net_device *dev,
struct ethtool_stats *stats, uint64_t *data)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
int index = 0;
/* Get LRO statistics */
data[index++] = priv->lro.lro_mgr.stats.aggregated;
data[index++] = priv->lro.lro_mgr.stats.flushed;
if (priv->lro.lro_mgr.stats.flushed)
data[index++] = priv->lro.lro_mgr.stats.aggregated /
priv->lro.lro_mgr.stats.flushed;
else
data[index++] = 0;
data[index++] = priv->lro.lro_mgr.stats.no_desc;
}
static const struct ethtool_ops ipoib_ethtool_ops = {
.get_drvinfo = ipoib_get_drvinfo,
.get_tso = ethtool_op_get_tso,
.get_coalesce = ipoib_get_coalesce,
.set_coalesce = ipoib_set_coalesce,
.get_flags = ethtool_op_get_flags,
.set_flags = ethtool_op_set_flags,
.get_strings = ipoib_get_strings,
.get_sset_count = ipoib_get_sset_count,
.get_ethtool_stats = ipoib_get_ethtool_stats,
};
void ipoib_set_ethtool_ops(struct net_device *dev)
......
......@@ -288,7 +288,10 @@ static void ipoib_ib_handle_rx_wc(struct net_device *dev, struct ib_wc *wc)
if (test_bit(IPOIB_FLAG_CSUM, &priv->flags) && likely(wc->csum_ok))
skb->ip_summed = CHECKSUM_UNNECESSARY;
netif_receive_skb(skb);
if (dev->features & NETIF_F_LRO)
lro_receive_skb(&priv->lro.lro_mgr, skb, NULL);
else
netif_receive_skb(skb);
repost:
if (unlikely(ipoib_ib_post_receive(dev, wr_id)))
......@@ -440,6 +443,9 @@ int ipoib_poll(struct napi_struct *napi, int budget)
}
if (done < budget) {
if (dev->features & NETIF_F_LRO)
lro_flush_all(&priv->lro.lro_mgr);
netif_rx_complete(dev, napi);
if (unlikely(ib_req_notify_cq(priv->recv_cq,
IB_CQ_NEXT_COMP |
......
......@@ -60,6 +60,15 @@ MODULE_PARM_DESC(send_queue_size, "Number of descriptors in send queue");
module_param_named(recv_queue_size, ipoib_recvq_size, int, 0444);
MODULE_PARM_DESC(recv_queue_size, "Number of descriptors in receive queue");
static int lro;
module_param(lro, bool, 0444);
MODULE_PARM_DESC(lro, "Enable LRO (Large Receive Offload)");
static int lro_max_aggr = IPOIB_LRO_MAX_AGGR;
module_param(lro_max_aggr, int, 0644);
MODULE_PARM_DESC(lro_max_aggr, "LRO: Max packets to be aggregated "
"(default = 64)");
#ifdef CONFIG_INFINIBAND_IPOIB_DEBUG
int ipoib_debug_level;
......@@ -936,6 +945,54 @@ static const struct header_ops ipoib_header_ops = {
.create = ipoib_hard_header,
};
static int get_skb_hdr(struct sk_buff *skb, void **iphdr,
void **tcph, u64 *hdr_flags, void *priv)
{
unsigned int ip_len;
struct iphdr *iph;
if (unlikely(skb->protocol != htons(ETH_P_IP)))
return -1;
/*
* In the future we may add an else clause that verifies the
* checksum and allows devices which do not calculate checksum
* to use LRO.
*/
if (unlikely(skb->ip_summed != CHECKSUM_UNNECESSARY))
return -1;
/* Check for non-TCP packet */
skb_reset_network_header(skb);
iph = ip_hdr(skb);
if (iph->protocol != IPPROTO_TCP)
return -1;
ip_len = ip_hdrlen(skb);
skb_set_transport_header(skb, ip_len);
*tcph = tcp_hdr(skb);
/* check if IP header and TCP header are complete */
if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb))
return -1;
*hdr_flags = LRO_IPV4 | LRO_TCP;
*iphdr = iph;
return 0;
}
static void ipoib_lro_setup(struct ipoib_dev_priv *priv)
{
priv->lro.lro_mgr.max_aggr = lro_max_aggr;
priv->lro.lro_mgr.max_desc = IPOIB_MAX_LRO_DESCRIPTORS;
priv->lro.lro_mgr.lro_arr = priv->lro.lro_desc;
priv->lro.lro_mgr.get_skb_header = get_skb_hdr;
priv->lro.lro_mgr.features = LRO_F_NAPI;
priv->lro.lro_mgr.dev = priv->dev;
priv->lro.lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY;
}
static void ipoib_setup(struct net_device *dev)
{
struct ipoib_dev_priv *priv = netdev_priv(dev);
......@@ -975,6 +1032,8 @@ static void ipoib_setup(struct net_device *dev)
priv->dev = dev;
ipoib_lro_setup(priv);
spin_lock_init(&priv->lock);
spin_lock_init(&priv->tx_lock);
......@@ -1152,6 +1211,9 @@ static struct net_device *ipoib_add_port(const char *format,
priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
}
if (lro)
priv->dev->features |= NETIF_F_LRO;
/*
* Set the full membership bit, so that we join the right
* broadcast group, etc.
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册