提交 af34d637 编写于 作者: D David Milburn 提交者: Tejun Heo

libata: add ATA_HORKAGE_MAX_SEC_1024 to revert back to previous max_sectors limit

Since no longer limiting max_sectors to BLK_DEF_MAX_SECTORS (commit 34b48db6),
data corruption may occur on ST380013AS drive configured on 82801JI (ICH10 Family)
SATA controller. This patch will allow the driver to limit max_sectors as before

 # cat /sys/block/sdb/queue/max_sectors_kb
 512

I was able to double the max_sectors_kb value up to 16384 on linux-4.2.0-rc2
before seeing corruption, but seems safer to use previous limit. Without this
patch max_sectors_kb will be 32767.

tj: Minor comment update.
Reported-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NDavid Milburn <dmilburn@redhat.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v3.19 and later
Fixes: 34b48db6 ("block: remove artifical max_hw_sectors cap")
上级 cda57b1b
......@@ -2478,6 +2478,10 @@ int ata_dev_configure(struct ata_device *dev)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024,
dev->max_sectors);
if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48)
dev->max_sectors = ATA_MAX_SECTORS_LBA48;
......@@ -4146,6 +4150,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 },
{ "Slimtype DVD A DS8A9SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 },
/*
* Causes silent data corruption with higher max sects.
* http://lkml.kernel.org/g/x49wpy40ysk.fsf@segfault.boston.devel.redhat.com
*/
{ "ST380013AS", "3.20", ATA_HORKAGE_MAX_SEC_1024 },
/* Devices we expect to fail diagnostics */
/* Devices where NCQ should be avoided */
......
......@@ -45,6 +45,7 @@ enum {
ATA_SECT_SIZE = 512,
ATA_MAX_SECTORS_128 = 128,
ATA_MAX_SECTORS = 256,
ATA_MAX_SECTORS_1024 = 1024,
ATA_MAX_SECTORS_LBA48 = 65535,/* TODO: 65536? */
ATA_MAX_SECTORS_TAPE = 65535,
......
......@@ -432,7 +432,7 @@ enum {
ATA_HORKAGE_ZERO_AFTER_TRIM = (1 << 22),/* guarantees zero after trim */
ATA_HORKAGE_NO_NCQ_LOG = (1 << 23), /* don't use NCQ for log read */
ATA_HORKAGE_NOTRIM = (1 << 24), /* don't use TRIM */
ATA_HORKAGE_MAX_SEC_1024 = (1 << 25), /* Limit max sects to 1024 */
/* DMA mask for user DMA control: User visible values; DO NOT
renumber */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册