提交 ae799430 编写于 作者: D Dmytro Laktyushkin 提交者: Alex Deucher

drm/amd/display: minor clock source refactor

This should make it easier to share code with newer ASICs
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
上级 540f7d80
......@@ -465,7 +465,6 @@ static uint32_t dce110_get_pix_clk_dividers_helper (
struct pll_settings *pll_settings,
struct pixel_clk_params *pix_clk_params)
{
uint32_t value = 0;
uint32_t field = 0;
uint32_t pll_calc_error = MAX_PLL_CALC_ERROR;
......@@ -473,7 +472,6 @@ static uint32_t dce110_get_pix_clk_dividers_helper (
* HW Dce80 spec:
* 00 - PCIE_REFCLK, 01 - XTALIN, 02 - GENERICA, 03 - GENERICB
* 04 - HSYNCA, 05 - GENLK_CLK, 06 - PCIE_REFCLK, 07 - DVOCLK0 */
value = REG_READ(PLL_CNTL);
REG_GET(PLL_CNTL, PLL_REF_DIV_SRC, &field);
pll_settings->use_external_clk = (field > 1);
......@@ -807,51 +805,30 @@ static void dce112_program_pixel_clk_resync(
}
static bool dce110_program_pix_clk(
struct clock_source *clk_src,
struct clock_source *clock_source,
struct pixel_clk_params *pix_clk_params,
struct pll_settings *pll_settings)
{
struct dce110_clk_src *dce110_clk_src = TO_DCE110_CLK_SRC(clk_src);
struct dce110_clk_src *clk_src = TO_DCE110_CLK_SRC(clock_source);
struct bp_pixel_clock_parameters bp_pc_params = {0};
/* First disable SS
* ATOMBIOS will enable by default SS on PLL for DP,
* do not disable it here
*/
if (clk_src->id != CLOCK_SOURCE_ID_EXTERNAL &&
if (clock_source->id != CLOCK_SOURCE_ID_EXTERNAL &&
!dc_is_dp_signal(pix_clk_params->signal_type) &&
clk_src->ctx->dce_version <= DCE_VERSION_11_0)
disable_spread_spectrum(dce110_clk_src);
clock_source->ctx->dce_version <= DCE_VERSION_11_0)
disable_spread_spectrum(clk_src);
/*ATOMBIOS expects pixel rate adjusted by deep color ratio)*/
bp_pc_params.controller_id = pix_clk_params->controller_id;
bp_pc_params.pll_id = clk_src->id;
bp_pc_params.pll_id = clock_source->id;
bp_pc_params.target_pixel_clock = pll_settings->actual_pix_clk;
bp_pc_params.encoder_object_id = pix_clk_params->encoder_object_id;
bp_pc_params.signal_type = pix_clk_params->signal_type;
switch (clk_src->ctx->dce_version) {
case DCE_VERSION_11_2:
if (clk_src->id != CLOCK_SOURCE_ID_DP_DTO) {
bp_pc_params.flags.SET_GENLOCK_REF_DIV_SRC =
pll_settings->use_external_clk;
bp_pc_params.flags.SET_XTALIN_REF_SRC =
!pll_settings->use_external_clk;
if (pix_clk_params->flags.SUPPORT_YCBCR420) {
bp_pc_params.target_pixel_clock = pll_settings->actual_pix_clk / 2;
bp_pc_params.flags.SUPPORT_YUV_420 = 1;
}
}
if (dce110_clk_src->bios->funcs->set_pixel_clock(
dce110_clk_src->bios, &bp_pc_params) != BP_RESULT_OK)
return false;
/* Resync deep color DTO */
if (clk_src->id != CLOCK_SOURCE_ID_DP_DTO)
dce112_program_pixel_clk_resync(dce110_clk_src,
pix_clk_params->signal_type,
pix_clk_params->color_depth,
pix_clk_params->flags.SUPPORT_YCBCR420);
break;
switch (clock_source->ctx->dce_version) {
case DCE_VERSION_8_0:
case DCE_VERSION_10_0:
case DCE_VERSION_11_0:
......@@ -864,28 +841,49 @@ static bool dce110_program_pix_clk(
bp_pc_params.flags.SET_EXTERNAL_REF_DIV_SRC =
pll_settings->use_external_clk;
if (dce110_clk_src->bios->funcs->set_pixel_clock(
dce110_clk_src->bios, &bp_pc_params) != BP_RESULT_OK)
if (clk_src->bios->funcs->set_pixel_clock(
clk_src->bios, &bp_pc_params) != BP_RESULT_OK)
return false;
/* Enable SS
* ATOMBIOS will enable by default SS for DP on PLL ( DP ID clock),
* based on HW display PLL team, SS control settings should be programmed
* during PLL Reset, but they do not have effect
* until SS_EN is asserted.*/
if (clk_src->id != CLOCK_SOURCE_ID_EXTERNAL
if (clock_source->id != CLOCK_SOURCE_ID_EXTERNAL
&& pix_clk_params->flags.ENABLE_SS && !dc_is_dp_signal(
pix_clk_params->signal_type)) {
if (!enable_spread_spectrum(dce110_clk_src,
if (!enable_spread_spectrum(clk_src,
pix_clk_params->signal_type,
pll_settings))
return false;
/* Resync deep color DTO */
dce110_program_pixel_clk_resync(dce110_clk_src,
dce110_program_pixel_clk_resync(clk_src,
pix_clk_params->signal_type,
pix_clk_params->color_depth);
}
break;
case DCE_VERSION_11_2:
if (clock_source->id != CLOCK_SOURCE_ID_DP_DTO) {
bp_pc_params.flags.SET_GENLOCK_REF_DIV_SRC =
pll_settings->use_external_clk;
bp_pc_params.flags.SET_XTALIN_REF_SRC =
!pll_settings->use_external_clk;
if (pix_clk_params->flags.SUPPORT_YCBCR420) {
bp_pc_params.target_pixel_clock = pll_settings->actual_pix_clk / 2;
bp_pc_params.flags.SUPPORT_YUV_420 = 1;
}
}
if (clk_src->bios->funcs->set_pixel_clock(
clk_src->bios, &bp_pc_params) != BP_RESULT_OK)
return false;
/* Resync deep color DTO */
if (clock_source->id != CLOCK_SOURCE_ID_DP_DTO)
dce112_program_pixel_clk_resync(clk_src,
pix_clk_params->signal_type,
pix_clk_params->color_depth,
pix_clk_params->flags.SUPPORT_YCBCR420);
break;
default:
break;
}
......
......@@ -41,6 +41,7 @@
#define CS_COMMON_REG_LIST_DCE_112(id) \
SRI(PIXCLK_RESYNC_CNTL, PHYPLL, id)
#define CS_SF(reg_name, field_name, post_fix)\
.field_name = reg_name ## __ ## field_name ## post_fix
......@@ -48,11 +49,11 @@
CS_SF(PLL_CNTL, PLL_REF_DIV_SRC, mask_sh),\
CS_SF(PIXCLK1_RESYNC_CNTL, DCCG_DEEP_COLOR_CNTL1, mask_sh),\
CS_SF(PLL_POST_DIV, PLL_POST_DIV_PIXCLK, mask_sh),\
CS_SF(PLL_REF_DIV, PLL_REF_DIV, mask_sh),\
CS_SF(PLL_REF_DIV, PLL_REF_DIV, mask_sh)
#define CS_COMMON_MASK_SH_LIST_DCE_112(mask_sh)\
CS_SF(PHYPLLA_PIXCLK_RESYNC_CNTL, PHYPLLA_DCCG_DEEP_COLOR_CNTL, mask_sh),\
CS_SF(PHYPLLA_PIXCLK_RESYNC_CNTL, PHYPLLA_PIXCLK_DOUBLE_RATE_ENABLE, mask_sh),\
CS_SF(PHYPLLA_PIXCLK_RESYNC_CNTL, PHYPLLA_PIXCLK_DOUBLE_RATE_ENABLE, mask_sh)
#define CS_REG_FIELD_LIST(type) \
type PLL_REF_DIV_SRC; \
......@@ -61,6 +62,7 @@
type PHYPLLA_PIXCLK_DOUBLE_RATE_ENABLE; \
type PLL_POST_DIV_PIXCLK; \
type PLL_REF_DIV; \
type DP_DTO0_ENABLE;
struct dce110_clk_src_shift {
CS_REG_FIELD_LIST(uint8_t)
......@@ -74,6 +76,9 @@ struct dce110_clk_src_regs {
uint32_t RESYNC_CNTL;
uint32_t PIXCLK_RESYNC_CNTL;
uint32_t PLL_CNTL;
uint32_t PHASE;
uint32_t MODULO;
uint32_t PIXEL_RATE_CNTL;
};
struct dce110_clk_src {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册