staging: Solo6x10: Stripped "solo6010-" from file names.

This driver supports both Solo-6010 and Solo-6110 chips anyway.
Renamed solo6010.h -> solo6x10.h.
Signed-off-by: NKrzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/staging/solo6x10/Makefile

-solo6x10-y	:= solo6010-core.o solo6010-i2c.o solo6010-p2m.o \
-		   solo6010-v4l2.o solo6010-tw28.o solo6010-gpio.o \
-		   solo6010-disp.o solo6010-enc.o solo6010-v4l2-enc.o \
-		   solo6010-g723.o
+solo6x10-y := core.o i2c.o p2m.o v4l2.o tw28.o gpio.o disp.o enc.o v4l2-enc.o g723.o
 
 obj-$(CONFIG_SOLO6X10) := solo6x10.o

drivers/staging/solo6x10/solo6010-core.c → drivers/staging/solo6x10/core.c

@@ -22,9 +22,8 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/videodev2.h>
-
-#include "solo6010.h"
-#include "solo6010-tw28.h"
+#include "solo6x10.h"
+#include "tw28.h"
 
 MODULE_DESCRIPTION("Softlogic 6010 MP4 Encoder/Decoder V4L2/ALSA Driver");
 MODULE_AUTHOR("Ben Collins <bcollins@bluecherry.net>");

drivers/staging/solo6x10/solo6010-disp.c → drivers/staging/solo6x10/disp.c

@@ -21,8 +21,7 @@
 #include <linux/module.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-ioctl.h>
-
-#include "solo6010.h"
+#include "solo6x10.h"
 
 #define SOLO_VCLK_DELAY			3
 #define SOLO_PROGRESSIVE_VSIZE		1024

drivers/staging/solo6x10/solo6010-enc.c → drivers/staging/solo6x10/enc.c

@@ -18,9 +18,8 @@
  */
 
 #include <linux/kernel.h>
-
-#include "solo6010.h"
-#include "solo6010-osd-font.h"
+#include "solo6x10.h"
+#include "osd-font.h"
 
 #define CAPTURE_MAX_BANDWIDTH		32	/* D1 4channel (D1 == 4) */
 #define OSG_BUFFER_SIZE			1024

drivers/staging/solo6x10/solo6010-g723.c → drivers/staging/solo6x10/g723.c

@@ -22,14 +22,12 @@
 #include <linux/poll.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
-
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
 #include <sound/control.h>
-
-#include "solo6010.h"
-#include "solo6010-tw28.h"
+#include "solo6x10.h"
+#include "tw28.h"
 
 #define G723_INTR_ORDER		0
 #define G723_FDMA_PAGES		32

drivers/staging/solo6x10/solo6010-gpio.c → drivers/staging/solo6x10/gpio.c

@@ -20,8 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/fs.h>
 #include <asm/uaccess.h>
-
-#include "solo6010.h"
+#include "solo6x10.h"
 
 static void solo_gpio_mode(struct solo6010_dev *solo_dev,
 			   unsigned int port_mask, unsigned int mode)

drivers/staging/solo6x10/solo6010-i2c.c → drivers/staging/solo6x10/i2c.c

@@ -26,8 +26,7 @@
  * thread context, ACK the interrupt, and move on. -- BenC */
 
 #include <linux/kernel.h>
-
-#include "solo6010.h"
+#include "solo6x10.h"
 
 u8 solo_i2c_readbyte(struct solo6010_dev *solo_dev, int id, u8 addr, u8 off)
 {

drivers/staging/solo6x10/solo6010-p2m.c → drivers/staging/solo6x10/p2m.c

@@ -19,8 +19,7 @@
 
 #include <linux/kernel.h>
 #include <linux/scatterlist.h>
-
-#include "solo6010.h"
+#include "solo6x10.h"
 
 /* #define SOLO_TEST_P2M */
 

drivers/staging/solo6x10/solo6010-registers.h → drivers/staging/solo6x10/registers.h

@@ -20,7 +20,7 @@
 #ifndef __SOLO6010_REGISTERS_H
 #define __SOLO6010_REGISTERS_H
 
-#include "solo6010-offsets.h"
+#include "offsets.h"
 
 /* Global 6010 system configuration */
 #define SOLO_SYS_CFG				0x0000

drivers/staging/solo6x10/solo6010.h → drivers/staging/solo6x10/solo6x10.h

@@ -30,12 +30,10 @@
 #include <linux/delay.h>
 #include <asm/io.h>
 #include <asm/atomic.h>
-
 #include <linux/videodev2.h>
 #include <media/v4l2-dev.h>
 #include <media/videobuf-core.h>
-
-#include "solo6010-registers.h"
+#include "registers.h"
 
 #ifndef PCI_VENDOR_ID_SOFTLOGIC
 #define PCI_VENDOR_ID_SOFTLOGIC		0x9413

drivers/staging/solo6x10/solo6010-tw28.c → drivers/staging/solo6x10/tw28.c

@@ -18,9 +18,8 @@
  */
 
 #include <linux/kernel.h>
-
-#include "solo6010.h"
-#include "solo6010-tw28.h"
+#include "solo6x10.h"
+#include "tw28.h"
 
 /* XXX: Some of these values are masked into an 8-bit regs, and shifted
  * around for other 8-bit regs. What are the magic bits in these values? */

drivers/staging/solo6x10/solo6010-tw28.h → drivers/staging/solo6x10/tw28.h

@@ -20,7 +20,7 @@
 #ifndef __SOLO6010_TW28_H
 #define __SOLO6010_TW28_H
 
-#include "solo6010.h"
+#include "solo6x10.h"
 
 #define TW_NUM_CHIP				4
 #define TW_BASE_ADDR				0x28

drivers/staging/solo6x10/solo6010-v4l2-enc.c → drivers/staging/solo6x10/v4l2-enc.c

@@ -21,14 +21,12 @@
 #include <linux/module.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
-
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
 #include <media/videobuf-dma-sg.h>
-
-#include "solo6010.h"
-#include "solo6010-tw28.h"
-#include "solo6010-jpeg.h"
+#include "solo6x10.h"
+#include "tw28.h"
+#include "jpeg.h"
 
 #define MIN_VID_BUFFERS		4
 #define FRAME_BUF_SIZE		(128 * 1024)

drivers/staging/solo6x10/solo6010-v4l2.c → drivers/staging/solo6x10/v4l2.c

@@ -21,13 +21,11 @@
 #include <linux/module.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
-
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
 #include <media/videobuf-dma-sg.h>
-
-#include "solo6010.h"
-#include "solo6010-tw28.h"
+#include "solo6x10.h"
+#include "tw28.h"
 
 #define SOLO_HW_BPL		2048
 #define SOLO_DISP_PIX_FIELD	V4L2_FIELD_INTERLACED