Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 153
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 ae4c42e4 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc 

* 'next/cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (133 commits)
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: S3C64XX: Cleanup mach/regs-fb.h from mach-s3c64xx
  ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210
  ARM: S5PC100: Cleanup mach/regs-fb.h from mach-s5pc100
  ARM: S3C24XX: Use generic s3c_set_platdata for devices
  ARM: S3C64XX: Use generic s3c_set_platdata for OneNAND
  ARM: SAMSUNG: Use generic s3c_set_platdata for NAND
  ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCI
  ARM: SAMSUNG: Use generic s3c_set_platdata for HWMON
  ARM: SAMSUNG: Use generic s3c_set_platdata for FB
  ARM: SAMSUNG: Use generic s3c_set_platdata for TS
  ARM: S3C64XX: Add PWM backlight support on SMDK6410
  ARM: S5P64X0: Add PWM backlight support on SMDK6450
  ARM: S5P64X0: Add PWM backlight support on SMDK6440
  ARM: S5PC100: Add PWM backlight support on SMDKC100
  ARM: S5PV210: Add PWM backlight support on SMDKV210
  ARM: EXYNOS4: Add PWM backlight support on SMDKC210
  ARM: EXYNOS4: Add PWM backlight support on SMDKV310
  ARM: SAMSUNG: Create a common infrastructure for PWM backlight support
  clocksource: convert 32-bit down counting clocksource on S5PV210/S5P64X0
  ...

Fix up trivial conflict in arch/arm/mach-imx/mach-scb9328.c
上级 dd58ecba ab2a0e0d
展开全部 隐藏空白更改
内联 并排
Showing with 4685 addition and 7879 deletion
arch/arm/Kconfig
浏览文件 @ ae4c42e4
......@@ -686,6 +686,7 @@ config ARCH_S3C2410
select GENERIC_GPIO
select ARCH_HAS_CPUFREQ
select HAVE_CLK
select CLKDEV_LOOKUP
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C if I2C
help
......@@ -703,6 +704,7 @@ config ARCH_S3C64XX
select CPU_V6
select ARM_VIC
select HAVE_CLK
select CLKDEV_LOOKUP
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
select ARCH_HAS_CPUFREQ
......@@ -727,6 +729,8 @@ config ARCH_S5P64X0
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select GENERIC_CLOCKEVENTS
select HAVE_SCHED_CLOCK
......@@ -740,6 +744,7 @@ config ARCH_S5PC100
bool "Samsung S5PC100"
select GENERIC_GPIO
select HAVE_CLK
select CLKDEV_LOOKUP
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
......@@ -755,6 +760,8 @@ config ARCH_S5PV210
select ARCH_SPARSEMEM_ENABLE
select GENERIC_GPIO
select HAVE_CLK
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select ARM_L1_CACHE_SHIFT_6
select ARCH_HAS_CPUFREQ
select GENERIC_CLOCKEVENTS
......@@ -771,6 +778,7 @@ config ARCH_EXYNOS4
select ARCH_SPARSEMEM_ENABLE
select GENERIC_GPIO
select HAVE_CLK
select CLKDEV_LOOKUP
select ARCH_HAS_CPUFREQ
select GENERIC_CLOCKEVENTS
select HAVE_S3C_RTC if RTC_CLASS
......@@ -856,6 +864,7 @@ config ARCH_OMAP
select HAVE_CLK
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_CPUFREQ
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_SCHED_CLOCK
select ARCH_HAS_HOLES_MEMORYMODEL
......
arch/arm/configs/cm_x300_defconfig
浏览文件 @ ae4c42e4
......@@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_MODULES=y
......@@ -13,6 +12,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_PXA=y
CONFIG_GPIO_PCA953X=y
CONFIG_MACH_CM_X300=y
CONFIG_NO_HZ=y
CONFIG_AEABI=y
......@@ -23,7 +23,6 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
CONFIG_APM_EMULATION=y
CONFIG_NET=y
CONFIG_PACKET=y
......@@ -40,8 +39,8 @@ CONFIG_IP_PNP_RARP=y
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
......@@ -60,7 +59,6 @@ CONFIG_MTD_NAND_PXA3xx=y
CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
# CONFIG_MISC_DEVICES is not set
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
......@@ -81,16 +79,15 @@ CONFIG_TOUCHSCREEN_WM97XX=m
# CONFIG_TOUCHSCREEN_WM9705 is not set
# CONFIG_TOUCHSCREEN_WM9713 is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_PXA=y
CONFIG_SERIAL_PXA_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_PXA=y
CONFIG_SPI=y
CONFIG_SPI_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_PCA953X=y
# CONFIG_HWMON is not set
CONFIG_PMIC_DA903X=y
CONFIG_REGULATOR=y
......@@ -102,7 +99,6 @@ CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_TDO24M=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_DA903X=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FONTS=y
......@@ -131,7 +127,6 @@ CONFIG_HID_GREENASIA=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_HID_WACOM=m
CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
......@@ -152,7 +147,6 @@ CONFIG_RTC_DRV_PXA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_TMPFS=y
......@@ -164,7 +158,6 @@ CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_SMB_FS=m
CONFIG_CIFS=m
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_PARTITION_ADVANCED=y
......@@ -172,9 +165,7 @@ CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_ISO8859_1=m
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
......@@ -182,7 +173,6 @@ CONFIG_DEBUG_LL=y
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_T10DIF=y
arch/arm/include/asm/hardware/scoop.h
浏览文件 @ ae4c42e4
......@@ -61,7 +61,6 @@ struct scoop_pcmcia_dev {
struct scoop_pcmcia_config {
struct scoop_pcmcia_dev *devs;
int num_devs;
void (*pcmcia_init)(void);
void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr);
};
......
arch/arm/mach-davinci/board-dm646x-evm.c
浏览文件 @ ae4c42e4
......@@ -719,9 +719,15 @@ static void __init cdce_clk_init(void)
}
}
#define DM6467T_EVM_REF_FREQ 33000000
static void __init davinci_map_io(void)
{
dm646x_init();
if (machine_is_davinci_dm6467tevm())
davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ);
cdce_clk_init();
}
......@@ -785,17 +791,6 @@ static __init void evm_init(void)
soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
}
#define DM646X_EVM_REF_FREQ 27000000
#define DM6467T_EVM_REF_FREQ 33000000
void __init dm646x_board_setup_refclk(struct clk *clk)
{
if (machine_is_davinci_dm6467tevm())
clk->rate = DM6467T_EVM_REF_FREQ;
else
clk->rate = DM646X_EVM_REF_FREQ;
}
MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
.boot_params = (0x80000100),
.map_io = davinci_map_io,
......
arch/arm/mach-davinci/clock.c
浏览文件 @ ae4c42e4
......@@ -368,6 +368,12 @@ static unsigned long clk_leafclk_recalc(struct clk *clk)
return clk->parent->rate;
}
int davinci_simple_set_rate(struct clk *clk, unsigned long rate)
{
clk->rate = rate;
return 0;
}
static unsigned long clk_pllclk_recalc(struct clk *clk)
{
u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
......@@ -506,6 +512,38 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
}
EXPORT_SYMBOL(davinci_set_pllrate);
/**
* davinci_set_refclk_rate() - Set the reference clock rate
* @rate: The new rate.
*
* Sets the reference clock rate to a given value. This will most likely
* result in the entire clock tree getting updated.
*
* This is used to support boards which use a reference clock different
* than that used by default in <soc>.c file. The reference clock rate
* should be updated early in the boot process; ideally soon after the
* clock tree has been initialized once with the default reference clock
* rate (davinci_common_init()).
*
* Returns 0 on success, error otherwise.
*/
int davinci_set_refclk_rate(unsigned long rate)
{
struct clk *refclk;
refclk = clk_get(NULL, "ref");
if (IS_ERR(refclk)) {
pr_err("%s: failed to get reference clock.\n", __func__);
return PTR_ERR(refclk);
}
clk_set_rate(refclk, rate);
clk_put(refclk);
return 0;
}
int __init davinci_clk_init(struct clk_lookup *clocks)
{
struct clk_lookup *c;
......
arch/arm/mach-davinci/clock.h
浏览文件 @ ae4c42e4
......@@ -123,6 +123,8 @@ int davinci_clk_init(struct clk_lookup *clocks);
int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
unsigned int mult, unsigned int postdiv);
int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate);
int davinci_set_refclk_rate(unsigned long rate);
int davinci_simple_set_rate(struct clk *clk, unsigned long rate);
extern struct platform_device davinci_wdt_device;
extern void davinci_watchdog_reset(struct platform_device *);
......
arch/arm/mach-davinci/dm646x.c
浏览文件 @ ae4c42e4
......@@ -43,6 +43,7 @@
/*
* Device specific clocks
*/
#define DM646X_REF_FREQ 27000000
#define DM646X_AUX_FREQ 24000000
static struct pll_data pll1_data = {
......@@ -57,6 +58,8 @@ static struct pll_data pll2_data = {
static struct clk ref_clk = {
.name = "ref_clk",
.rate = DM646X_REF_FREQ,
.set_rate = davinci_simple_set_rate,
};
static struct clk aux_clkin = {
......@@ -902,7 +905,6 @@ int __init dm646x_init_edma(struct edma_rsv_info *rsv)
void __init dm646x_init(void)
{
dm646x_board_setup_refclk(&ref_clk);
davinci_common_init(&davinci_soc_info_dm646x);
}
......
arch/arm/mach-davinci/include/mach/dm646x.h
浏览文件 @ ae4c42e4
......@@ -15,7 +15,6 @@
#include <mach/asp.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <linux/clk.h>
#include <linux/davinci_emac.h>
#define DM646X_EMAC_BASE (0x01C80000)
......@@ -31,7 +30,6 @@
void __init dm646x_init(void);
void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
void __init dm646x_board_setup_refclk(struct clk *clk);
int __init dm646x_init_edma(struct edma_rsv_info *rsv);
void dm646x_video_init(void);
......
arch/arm/mach-davinci/include/mach/psc.h
浏览文件 @ ae4c42e4
......@@ -30,47 +30,47 @@
#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
/* Power and Sleep Controller (PSC) Domains */
#define DAVINCI_GPSC_ARMDOMAIN 0
#define DAVINCI_GPSC_DSPDOMAIN 1
#define DAVINCI_GPSC_ARMDOMAIN 0
#define DAVINCI_GPSC_DSPDOMAIN 1
#define DAVINCI_LPSC_VPSSMSTR 0
#define DAVINCI_LPSC_VPSSSLV 1
#define DAVINCI_LPSC_TPCC 2
#define DAVINCI_LPSC_TPTC0 3
#define DAVINCI_LPSC_TPTC1 4
#define DAVINCI_LPSC_EMAC 5
#define DAVINCI_LPSC_EMAC_WRAPPER 6
#define DAVINCI_LPSC_USB 9
#define DAVINCI_LPSC_ATA 10
#define DAVINCI_LPSC_VLYNQ 11
#define DAVINCI_LPSC_UHPI 12
#define DAVINCI_LPSC_DDR_EMIF 13
#define DAVINCI_LPSC_AEMIF 14
#define DAVINCI_LPSC_MMC_SD 15
#define DAVINCI_LPSC_McBSP 17
#define DAVINCI_LPSC_I2C 18
#define DAVINCI_LPSC_UART0 19
#define DAVINCI_LPSC_UART1 20
#define DAVINCI_LPSC_UART2 21
#define DAVINCI_LPSC_SPI 22
#define DAVINCI_LPSC_PWM0 23
#define DAVINCI_LPSC_PWM1 24
#define DAVINCI_LPSC_PWM2 25
#define DAVINCI_LPSC_GPIO 26
#define DAVINCI_LPSC_TIMER0 27
#define DAVINCI_LPSC_TIMER1 28
#define DAVINCI_LPSC_TIMER2 29
#define DAVINCI_LPSC_SYSTEM_SUBSYS 30
#define DAVINCI_LPSC_ARM 31
#define DAVINCI_LPSC_SCR2 32
#define DAVINCI_LPSC_SCR3 33
#define DAVINCI_LPSC_SCR4 34
#define DAVINCI_LPSC_CROSSBAR 35
#define DAVINCI_LPSC_CFG27 36
#define DAVINCI_LPSC_CFG3 37
#define DAVINCI_LPSC_CFG5 38
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
#define DAVINCI_LPSC_VPSSMSTR 0
#define DAVINCI_LPSC_VPSSSLV 1
#define DAVINCI_LPSC_TPCC 2
#define DAVINCI_LPSC_TPTC0 3
#define DAVINCI_LPSC_TPTC1 4
#define DAVINCI_LPSC_EMAC 5
#define DAVINCI_LPSC_EMAC_WRAPPER 6
#define DAVINCI_LPSC_USB 9
#define DAVINCI_LPSC_ATA 10
#define DAVINCI_LPSC_VLYNQ 11
#define DAVINCI_LPSC_UHPI 12
#define DAVINCI_LPSC_DDR_EMIF 13
#define DAVINCI_LPSC_AEMIF 14
#define DAVINCI_LPSC_MMC_SD 15
#define DAVINCI_LPSC_McBSP 17
#define DAVINCI_LPSC_I2C 18
#define DAVINCI_LPSC_UART0 19
#define DAVINCI_LPSC_UART1 20
#define DAVINCI_LPSC_UART2 21
#define DAVINCI_LPSC_SPI 22
#define DAVINCI_LPSC_PWM0 23
#define DAVINCI_LPSC_PWM1 24
#define DAVINCI_LPSC_PWM2 25
#define DAVINCI_LPSC_GPIO 26
#define DAVINCI_LPSC_TIMER0 27
#define DAVINCI_LPSC_TIMER1 28
#define DAVINCI_LPSC_TIMER2 29
#define DAVINCI_LPSC_SYSTEM_SUBSYS 30
#define DAVINCI_LPSC_ARM 31
#define DAVINCI_LPSC_SCR2 32
#define DAVINCI_LPSC_SCR3 33
#define DAVINCI_LPSC_SCR4 34
#define DAVINCI_LPSC_CROSSBAR 35
#define DAVINCI_LPSC_CFG27 36
#define DAVINCI_LPSC_CFG3 37
#define DAVINCI_LPSC_CFG5 38
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
#define DM355_LPSC_TIMER3 5
#define DM355_LPSC_SPI1 6
......@@ -102,39 +102,39 @@
/*
* LPSC Assignments
*/
#define DM646X_LPSC_ARM 0
#define DM646X_LPSC_C64X_CPU 1
#define DM646X_LPSC_HDVICP0 2
#define DM646X_LPSC_HDVICP1 3
#define DM646X_LPSC_TPCC 4
#define DM646X_LPSC_TPTC0 5
#define DM646X_LPSC_TPTC1 6
#define DM646X_LPSC_TPTC2 7
#define DM646X_LPSC_TPTC3 8
#define DM646X_LPSC_PCI 13
#define DM646X_LPSC_EMAC 14
#define DM646X_LPSC_VDCE 15
#define DM646X_LPSC_VPSSMSTR 16
#define DM646X_LPSC_VPSSSLV 17
#define DM646X_LPSC_TSIF0 18
#define DM646X_LPSC_TSIF1 19
#define DM646X_LPSC_DDR_EMIF 20
#define DM646X_LPSC_AEMIF 21
#define DM646X_LPSC_McASP0 22
#define DM646X_LPSC_McASP1 23
#define DM646X_LPSC_CRGEN0 24
#define DM646X_LPSC_CRGEN1 25
#define DM646X_LPSC_UART0 26
#define DM646X_LPSC_UART1 27
#define DM646X_LPSC_UART2 28
#define DM646X_LPSC_PWM0 29
#define DM646X_LPSC_PWM1 30
#define DM646X_LPSC_I2C 31
#define DM646X_LPSC_SPI 32
#define DM646X_LPSC_GPIO 33
#define DM646X_LPSC_TIMER0 34
#define DM646X_LPSC_TIMER1 35
#define DM646X_LPSC_ARM_INTC 45
#define DM646X_LPSC_ARM 0
#define DM646X_LPSC_C64X_CPU 1
#define DM646X_LPSC_HDVICP0 2
#define DM646X_LPSC_HDVICP1 3
#define DM646X_LPSC_TPCC 4
#define DM646X_LPSC_TPTC0 5
#define DM646X_LPSC_TPTC1 6
#define DM646X_LPSC_TPTC2 7
#define DM646X_LPSC_TPTC3 8
#define DM646X_LPSC_PCI 13
#define DM646X_LPSC_EMAC 14
#define DM646X_LPSC_VDCE 15
#define DM646X_LPSC_VPSSMSTR 16
#define DM646X_LPSC_VPSSSLV 17
#define DM646X_LPSC_TSIF0 18
#define DM646X_LPSC_TSIF1 19
#define DM646X_LPSC_DDR_EMIF 20
#define DM646X_LPSC_AEMIF 21
#define DM646X_LPSC_McASP0 22
#define DM646X_LPSC_McASP1 23
#define DM646X_LPSC_CRGEN0 24
#define DM646X_LPSC_CRGEN1 25
#define DM646X_LPSC_UART0 26
#define DM646X_LPSC_UART1 27
#define DM646X_LPSC_UART2 28
#define DM646X_LPSC_PWM0 29
#define DM646X_LPSC_PWM1 30
#define DM646X_LPSC_I2C 31
#define DM646X_LPSC_SPI 32
#define DM646X_LPSC_GPIO 33
#define DM646X_LPSC_TIMER0 34
#define DM646X_LPSC_TIMER1 35
#define DM646X_LPSC_ARM_INTC 45
/* PSC0 defines */
#define DA8XX_LPSC0_TPCC 0
......@@ -243,7 +243,7 @@
#define PSC_STATE_DISABLE 2
#define PSC_STATE_ENABLE 3
#define MDSTAT_STATE_MASK 0x1f
#define MDSTAT_STATE_MASK 0x1f
#ifndef __ASSEMBLER__
......
arch/arm/mach-exynos4/Kconfig
浏览文件 @ ae4c42e4
......@@ -110,6 +110,8 @@ config MACH_SMDKC210
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS4_DEV_PD
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_I2C1
......@@ -127,8 +129,10 @@ config MACH_SMDKV310
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_PD
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
......
arch/arm/mach-exynos4/clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-exynos4/include/mach/clkdev.h 0 → 100644
浏览文件 @ ae4c42e4
#ifndef __MACH_CLKDEV_H__
#define __MACH_CLKDEV_H__
#define __clk_get(clk) ({ 1; })
#define __clk_put(clk) do {} while (0)
#endif
arch/arm/mach-exynos4/mach-smdkc210.c
浏览文件 @ ae4c42e4
......@@ -15,6 +15,7 @@
#include <linux/smsc911x.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/pwm_backlight.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
......@@ -27,6 +28,8 @@
#include <plat/sdhci.h>
#include <plat/iic.h>
#include <plat/pd.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <mach/map.h>
......@@ -191,6 +194,17 @@ static void __init smdkc210_smsc911x_init(void)
(0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
}
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
.no = EXYNOS4_GPD0(1),
.func = S3C_GPIO_SFN(2),
};
static struct platform_pwm_backlight_data smdkc210_bl_data = {
.pwm_id = 1,
.pwm_period_ns = 1000,
};
static void __init smdkc210_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
......@@ -210,6 +224,8 @@ static void __init smdkc210_machine_init(void)
s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
}
......
arch/arm/mach-exynos4/mach-smdkv310.c
浏览文件 @ ae4c42e4
......@@ -16,6 +16,7 @@
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/pwm_backlight.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
......@@ -29,6 +30,8 @@
#include <plat/sdhci.h>
#include <plat/iic.h>
#include <plat/pd.h>
#include <plat/gpio-cfg.h>
#include <plat/backlight.h>
#include <mach/map.h>
......@@ -209,6 +212,17 @@ static void __init smdkv310_smsc911x_init(void)
(0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
}
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = {
.no = EXYNOS4_GPD0(1),
.func = S3C_GPIO_SFN(2),
};
static struct platform_pwm_backlight_data smdkv310_bl_data = {
.pwm_id = 1,
.pwm_period_ns = 1000,
};
static void __init smdkv310_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
......@@ -230,6 +244,8 @@ static void __init smdkv310_machine_init(void)
samsung_keypad_set_platdata(&smdkv310_keypad_data);
samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}
......
arch/arm/mach-imx/Kconfig
浏览文件 @ ae4c42e4
......@@ -167,6 +167,7 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
......@@ -265,6 +266,7 @@ config MACH_EUKREA_MBIMX27_BASEBOARD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMX27 evaluation board.
......@@ -403,6 +405,7 @@ config MACH_MX31LITE
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_MXC_RTC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
......@@ -471,6 +474,7 @@ config MACH_MX31MOBOARD
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_MMC
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
select MXC_ULPI if USB_ULPI
help
Include support for mx31moboard platform. This includes specific
......@@ -577,6 +581,7 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IPU_CORE
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
......
arch/arm/mach-imx/dma-v1.c
浏览文件 @ ae4c42e4
......@@ -476,7 +476,6 @@ void imx_dma_enable(int channel)
imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
CCR_ACRPT, DMA_CCR(channel));
#ifdef CONFIG_ARCH_MX2
if ((cpu_is_mx21() || cpu_is_mx27()) &&
imxdma->sg && imx_dma_hw_chain(imxdma)) {
imxdma->sg = sg_next(imxdma->sg);
......@@ -488,7 +487,6 @@ void imx_dma_enable(int channel)
DMA_CCR(channel));
}
}
#endif
imxdma->in_use = 1;
local_irq_restore(flags);
......@@ -519,7 +517,6 @@ void imx_dma_disable(int channel)
}
EXPORT_SYMBOL(imx_dma_disable);
#ifdef CONFIG_ARCH_MX2
static void imx_dma_watchdog(unsigned long chno)
{
struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
......@@ -531,7 +528,6 @@ static void imx_dma_watchdog(unsigned long chno)
if (imxdma->err_handler)
imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
}
#endif
static irqreturn_t dma_err_handler(int irq, void *dev_id)
{
......@@ -655,10 +651,8 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
{
int i, disr;
#ifdef CONFIG_ARCH_MX2
if (cpu_is_mx21() || cpu_is_mx27())
dma_err_handler(irq, dev_id);
#endif
disr = imx_dmav1_readl(DMA_DISR);
......@@ -704,7 +698,6 @@ int imx_dma_request(int channel, const char *name)
imxdma->name = name;
local_irq_restore(flags); /* request_irq() can block */
#ifdef CONFIG_ARCH_MX2
if (cpu_is_mx21() || cpu_is_mx27()) {
ret = request_irq(MX2x_INT_DMACH0 + channel,
dma_irq_handler, 0, "DMA", NULL);
......@@ -718,7 +711,6 @@ int imx_dma_request(int channel, const char *name)
imxdma->watchdog.function = &imx_dma_watchdog;
imxdma->watchdog.data = channel;
}
#endif
return ret;
}
......@@ -745,10 +737,8 @@ void imx_dma_free(int channel)
imx_dma_disable(channel);
imxdma->name = NULL;
#ifdef CONFIG_ARCH_MX2
if (cpu_is_mx21() || cpu_is_mx27())
free_irq(MX2x_INT_DMACH0 + channel, NULL);
#endif
local_irq_restore(flags);
}
......@@ -804,21 +794,13 @@ static int __init imx_dma_init(void)
int ret = 0;
int i;
#ifdef CONFIG_ARCH_MX1
if (cpu_is_mx1())
imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
else
#endif
#ifdef CONFIG_MACH_MX21
if (cpu_is_mx21())
else if (cpu_is_mx21())
imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
else
#endif
#ifdef CONFIG_MACH_MX27
if (cpu_is_mx27())
else if (cpu_is_mx27())
imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
else
#endif
return 0;
dma_clk = clk_get(NULL, "dma");
......@@ -829,7 +811,6 @@ static int __init imx_dma_init(void)
/* reset DMA module */
imx_dmav1_writel(DCR_DRST, DMA_DCR);
#ifdef CONFIG_ARCH_MX1
if (cpu_is_mx1()) {
ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
if (ret) {
......@@ -844,7 +825,7 @@ static int __init imx_dma_init(void)
return ret;
}
}
#endif
/* enable DMA module */
imx_dmav1_writel(DCR_DEN, DMA_DCR);
......
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
浏览文件 @ ae4c42e4
......@@ -112,7 +112,7 @@ eukrea_mbimx27_keymap_data __initconst = {
.keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap),
};
static struct gpio_led gpio_leds[] = {
static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
{
.name = "led1",
.default_trigger = "heartbeat",
......@@ -127,17 +127,10 @@ static struct gpio_led gpio_leds[] = {
},
};
static struct gpio_led_platform_data gpio_led_info = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct platform_device leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &gpio_led_info,
},
static const struct gpio_led_platform_data
eukrea_mbimx27_gpio_led_info __initconst = {
.leds = eukrea_mbimx27_gpio_leds,
.num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
};
static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
......@@ -293,10 +286,6 @@ static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
},
};
static struct platform_device *platform_devices[] __initdata = {
&leds_gpio,
};
static const struct imxmmc_platform_data sdhc_pdata __initconst = {
.dat3_card_detect = 1,
};
......@@ -377,5 +366,5 @@ void __init eukrea_mbimx27_baseboard_init(void)
imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
}
arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
浏览文件 @ ae4c42e4
......@@ -173,7 +173,7 @@ static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
.dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
};
static struct gpio_led eukrea_mbimxsd_leds[] = {
static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
{
.name = "led1",
.default_trigger = "heartbeat",
......@@ -182,19 +182,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = {
},
};
static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
static const struct gpio_led_platform_data
eukrea_mbimxsd_led_info __initconst = {
.leds = eukrea_mbimxsd_leds,
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
};
static struct platform_device eukrea_mbimxsd_leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &eukrea_mbimxsd_led_info,
},
};
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
{
.gpio = GPIO_SWITCH1,
......@@ -212,7 +205,6 @@ static const struct gpio_keys_platform_data
};
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_leds_gpio,
&eukrea_mbimxsd_lcd_powerdev,
};
......@@ -287,5 +279,6 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
浏览文件 @ ae4c42e4
......@@ -193,19 +193,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = {
},
};
static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
static const struct gpio_led_platform_data
eukrea_mbimxsd_led_info __initconst = {
.leds = eukrea_mbimxsd_leds,
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
};
static struct platform_device eukrea_mbimxsd_leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &eukrea_mbimxsd_led_info,
},
};
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
{
.gpio = GPIO_SWITCH1,
......@@ -223,7 +216,6 @@ static const struct gpio_keys_platform_data
};
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_leds_gpio,
&eukrea_mbimxsd_lcd_powerdev,
};
......@@ -299,5 +291,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
arch/arm/mach-imx/mach-apf9328.c
浏览文件 @ ae4c42e4
......@@ -99,11 +99,6 @@ static struct platform_device dm9000x_device = {
}
};
/* --- SERIAL RESSOURCE --- */
static const struct imxuart_platform_data uart0_pdata __initconst = {
.flags = 0,
};
static const struct imxuart_platform_data uart1_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
......@@ -121,7 +116,7 @@ static void __init apf9328_init(void)
ARRAY_SIZE(apf9328_pins),
"APF9328");
imx1_add_imx_uart0(&uart0_pdata);
imx1_add_imx_uart0(NULL);
imx1_add_imx_uart1(&uart1_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
......
arch/arm/mach-imx/mach-imx27_visstrim_m10.c
浏览文件 @ ae4c42e4
......@@ -34,7 +34,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/iomux.h>
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
......
arch/arm/mach-imx/mach-mx27_3ds.c
浏览文件 @ ae4c42e4
......@@ -47,6 +47,7 @@
#define SPI2_SS0 IMX_GPIO_NR(4, 21)
#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28))
#define PMIC_INT IMX_GPIO_NR(3, 14)
#define SD1_CD IMX_GPIO_NR(2, 26)
static const int mx27pdk_pins[] __initconst = {
/* UART1 */
......@@ -135,13 +136,13 @@ static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
return request_irq(gpio_to_irq(SD1_CD), detect_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
}
static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOB(26), data);
free_irq(gpio_to_irq(SD1_CD), data);
}
static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
......@@ -261,11 +262,11 @@ static struct mc13xxx_platform_data mc13783_pdata = {
};
/* SPI */
static int spi2_internal_chipselect[] = {SPI2_SS0};
static int spi2_chipselect[] = {SPI2_SS0};
static const struct spi_imx_master spi2_pdata __initconst = {
.chipselect = spi2_internal_chipselect,
.num_chipselect = ARRAY_SIZE(spi2_internal_chipselect),
.chipselect = spi2_chipselect,
.num_chipselect = ARRAY_SIZE(spi2_chipselect),
};
static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
......@@ -275,7 +276,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
.bus_num = 1,
.chip_select = 0, /* SS0 */
.platform_data = &mc13783_pdata,
.irq = IRQ_GPIOC(14),
.irq = gpio_to_irq(PMIC_INT),
.mode = SPI_CS_HIGH,
},
};
......
arch/arm/mach-imx/mach-mx31moboard.c
浏览文件 @ ae4c42e4
......@@ -425,7 +425,7 @@ static int __init moboard_usbh2_init(void)
return 0;
}
static struct gpio_led mx31moboard_leds[] = {
static const struct gpio_led mx31moboard_leds[] __initconst = {
{
.name = "coreboard-led-0:red:running",
.default_trigger = "heartbeat",
......@@ -442,26 +442,17 @@ static struct gpio_led mx31moboard_leds[] = {
},
};
static struct gpio_led_platform_data mx31moboard_led_pdata = {
static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
.num_leds = ARRAY_SIZE(mx31moboard_leds),
.leds = mx31moboard_leds,
};
static struct platform_device mx31moboard_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mx31moboard_led_pdata,
},
};
static const struct ipu_platform_data mx3_ipu_data __initconst = {
.irq_base = MXC_IPU_IRQ_START,
};
static struct platform_device *devices[] __initdata = {
&mx31moboard_flash,
&mx31moboard_leds_device,
};
static struct mx3_camera_pdata camera_pdata __initdata = {
......@@ -513,6 +504,7 @@ static void __init mx31moboard_init(void)
"moboard");
platform_add_devices(devices, ARRAY_SIZE(devices));
gpio_led_register_device(-1, &mx31moboard_led_pdata);
imx31_add_imx_uart0(&uart0_pdata);
imx31_add_imx_uart4(&uart4_pdata);
......
arch/arm/mach-imx/mach-mx35_3ds.c
浏览文件 @ ae4c42e4
......@@ -43,7 +43,7 @@
#include "devices-imx35.h"
#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1))
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
......
arch/arm/mach-imx/mach-scb9328.c
浏览文件 @ ae4c42e4
......@@ -101,21 +101,7 @@ static const int mxc_uart1_pins[] = {
PC12_PF_UART1_RXD,
};
static int uart1_mxc_init(struct platform_device *pdev)
{
return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
ARRAY_SIZE(mxc_uart1_pins), "UART1");
}
static void uart1_mxc_exit(struct platform_device *pdev)
{
mxc_gpio_release_multiple_pins(mxc_uart1_pins,
ARRAY_SIZE(mxc_uart1_pins));
}
static const struct imxuart_platform_data uart_pdata __initconst = {
.init = uart1_mxc_init,
.exit = uart1_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
};
......@@ -131,6 +117,9 @@ static void __init scb9328_init(void)
{
imx1_soc_init();
mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
ARRAY_SIZE(mxc_uart1_pins), "UART1");
imx1_add_imx_uart0(&uart_pdata);
printk(KERN_INFO"Scb9328: Adding devices\n");
......
arch/arm/mach-imx/mx31lite-db.c
浏览文件 @ ae4c42e4
......@@ -161,7 +161,7 @@ static const struct spi_imx_master spi0_pdata __initconst = {
/* GPIO LEDs */
static struct gpio_led litekit_leds[] = {
static const struct gpio_led litekit_leds[] __initconst = {
{
.name = "GPIO0",
.gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
......@@ -176,19 +176,12 @@ static struct gpio_led litekit_leds[] = {
}
};
static struct gpio_led_platform_data litekit_led_platform_data = {
static const struct gpio_led_platform_data
litekit_led_platform_data __initconst = {
.leds = litekit_leds,
.num_leds = ARRAY_SIZE(litekit_leds),
};
static struct platform_device litekit_led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &litekit_led_platform_data,
},
};
void __init mx31lite_db_init(void)
{
mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
......@@ -197,7 +190,7 @@ void __init mx31lite_db_init(void)
imx31_add_imx_uart0(&uart_pdata);
imx31_add_mxc_mmc(0, &mmc_pdata);
imx31_add_spi_imx0(&spi0_pdata);
platform_device_register(&litekit_led_device);
gpio_led_register_device(-1, &litekit_led_platform_data);
imx31_add_imx2_wdt(NULL);
imx31_add_mxc_rtc(NULL);
}
arch/arm/mach-integrator/include/mach/bits.h 已删除 100644 → 0
浏览文件 @ dd58ecba
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* DO NOT EDIT!! - this file automatically generated
* from .s file by awk -f s2h.awk
*/
/* Bit field definitions
* Copyright (C) ARM Limited 1998. All rights reserved.
*/
#ifndef __bits_h
#define __bits_h 1
#define BIT0 0x00000001
#define BIT1 0x00000002
#define BIT2 0x00000004
#define BIT3 0x00000008
#define BIT4 0x00000010
#define BIT5 0x00000020
#define BIT6 0x00000040
#define BIT7 0x00000080
#define BIT8 0x00000100
#define BIT9 0x00000200
#define BIT10 0x00000400
#define BIT11 0x00000800
#define BIT12 0x00001000
#define BIT13 0x00002000
#define BIT14 0x00004000
#define BIT15 0x00008000
#define BIT16 0x00010000
#define BIT17 0x00020000
#define BIT18 0x00040000
#define BIT19 0x00080000
#define BIT20 0x00100000
#define BIT21 0x00200000
#define BIT22 0x00400000
#define BIT23 0x00800000
#define BIT24 0x01000000
#define BIT25 0x02000000
#define BIT26 0x04000000
#define BIT27 0x08000000
#define BIT28 0x10000000
#define BIT29 0x20000000
#define BIT30 0x40000000
#define BIT31 0x80000000
#endif
/* END */
arch/arm/mach-mx5/Kconfig
浏览文件 @ ae4c42e4
......@@ -109,6 +109,7 @@ config MACH_EUKREA_MBIMX51_BASEBOARD
bool
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMX51 evaluation board.
......@@ -135,6 +136,7 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD
prompt "Eukrea MBIMXSD development board"
bool
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
......@@ -151,6 +153,7 @@ config MX51_EFIKA_COMMON
config MACH_MX51_EFIKAMX
bool "Support MX51 Genesi Efika MX nettop"
select LEDS_GPIO_REGISTER
select MX51_EFIKA_COMMON
help
Include support for Genesi Efika MX nettop. This includes specific
......@@ -158,6 +161,7 @@ config MACH_MX51_EFIKAMX
config MACH_MX51_EFIKASB
bool "Support MX51 Genesi Efika Smartbook"
select LEDS_GPIO_REGISTER
select MX51_EFIKA_COMMON
help
Include support for Genesi Efika Smartbook. This includes specific
......
arch/arm/mach-mx5/board-cpuimx51.c
浏览文件 @ ae4c42e4
......@@ -43,10 +43,6 @@
#define CPUIMX51_QUARTB_GPIO IMX_GPIO_NR(3, 25)
#define CPUIMX51_QUARTC_GPIO IMX_GPIO_NR(3, 26)
#define CPUIMX51_QUARTD_GPIO IMX_GPIO_NR(3, 27)
#define CPUIMX51_QUARTA_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO)
#define CPUIMX51_QUARTB_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO)
#define CPUIMX51_QUARTC_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO)
#define CPUIMX51_QUARTD_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTD_GPIO)
#define CPUIMX51_QUART_XTAL 14745600
#define CPUIMX51_QUART_REGSHIFT 17
......@@ -61,7 +57,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
.irq = CPUIMX51_QUARTA_IRQ,
.irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
......@@ -69,7 +65,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
.irq = CPUIMX51_QUARTB_IRQ,
.irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
......@@ -77,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
.irq = CPUIMX51_QUARTC_IRQ,
.irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
......@@ -85,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
.irq = CPUIMX51_QUARTD_IRQ,
.irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
......
arch/arm/mach-mx5/board-mx51_3ds.c
浏览文件 @ ae4c42e4
......@@ -13,6 +13,7 @@
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -26,7 +27,7 @@
#include "devices-imx51.h"
#include "devices.h"
#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6))
#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28)
static iomux_v3_cfg_t mx51_3ds_pads[] = {
......
arch/arm/mach-mx5/board-mx51_babbage.c
浏览文件 @ ae4c42e4
......@@ -36,7 +36,7 @@
#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7)
#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27)
#define BABBAGE_PHY_RESET IMX_GPIO_NR(2, 5)
#define BABBAGE_USB_PHY_RESET IMX_GPIO_NR(2, 5)
#define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14)
#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21)
#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24)
......@@ -110,6 +110,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
/* USB HUB reset line*/
MX51_PAD_GPIO1_7__GPIO1_7,
/* USB PHY reset line */
MX51_PAD_EIM_D21__GPIO2_5,
/* FEC */
MX51_PAD_EIM_EB2__FEC_MDIO,
MX51_PAD_EIM_EB3__FEC_RDATA1,
......@@ -169,34 +172,31 @@ static struct imxi2c_platform_data babbage_hsi2c_data = {
.bitrate = 400000,
};
static struct gpio mx51_babbage_usbh1_gpios[] = {
{ BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
{ BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
};
static int gpio_usbh1_active(void)
{
iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5;
int ret;
/* Set USBH1_STP to GPIO and toggle it */
mxc_iomux_v3_setup_pad(usbh1stp_gpio);
ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp");
ret = gpio_request_array(mx51_babbage_usbh1_gpios,
ARRAY_SIZE(mx51_babbage_usbh1_gpios));
if (ret) {
pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret);
pr_debug("failed to get USBH1 pins: %d\n", ret);
return ret;
}
gpio_direction_output(BABBAGE_USBH1_STP, 0);
gpio_set_value(BABBAGE_USBH1_STP, 1);
msleep(100);
gpio_free(BABBAGE_USBH1_STP);
/* De-assert USB PHY RESETB */
mxc_iomux_v3_setup_pad(phyreset_gpio);
ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset");
if (ret) {
pr_debug("failed to get MX51_PAD_EIM_D21__GPIO_2_5: %d\n", ret);
return ret;
}
gpio_direction_output(BABBAGE_PHY_RESET, 1);
msleep(100);
gpio_set_value(BABBAGE_USBH1_STP, 1);
gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
gpio_free_array(mx51_babbage_usbh1_gpios,
ARRAY_SIZE(mx51_babbage_usbh1_gpios));
return 0;
}
......
arch/arm/mach-mx5/board-mx51_efikamx.c
浏览文件 @ ae4c42e4
......@@ -139,7 +139,7 @@ static void __init mx51_efikamx_board_id(void)
}
}
static struct gpio_led mx51_efikamx_leds[] = {
static struct gpio_led mx51_efikamx_leds[] __initdata = {
{
.name = "efikamx:green",
.default_trigger = "default-on",
......@@ -157,19 +157,12 @@ static struct gpio_led mx51_efikamx_leds[] = {
},
};
static struct gpio_led_platform_data mx51_efikamx_leds_data = {
static const struct gpio_led_platform_data
mx51_efikamx_leds_data __initconst = {
.leds = mx51_efikamx_leds,
.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
};
static struct platform_device mx51_efikamx_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mx51_efikamx_leds_data,
},
};
static struct gpio_keys_button mx51_efikamx_powerkey[] = {
{
.code = KEY_POWER,
......@@ -250,7 +243,7 @@ static void __init mx51_efikamx_init(void)
mx51_efikamx_leds[2].default_trigger = "mmc1";
}
platform_device_register(&mx51_efikamx_leds_device);
gpio_led_register_device(-1, &mx51_efikamx_leds_data);
imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
if (system_rev == 0x11) {
......
arch/arm/mach-mx5/board-mx51_efikasb.c
浏览文件 @ ae4c42e4
......@@ -132,7 +132,7 @@ static void __init mx51_efikasb_usb(void)
mxc_register_device(&mxc_usbh2_device, &usbh2_config);
}
static struct gpio_led mx51_efikasb_leds[] = {
static const struct gpio_led mx51_efikasb_leds[] __initconst = {
{
.name = "efikasb:green",
.default_trigger = "default-on",
......@@ -146,19 +146,12 @@ static struct gpio_led mx51_efikasb_leds[] = {
},
};
static struct gpio_led_platform_data mx51_efikasb_leds_data = {
static const struct gpio_led_platform_data
mx51_efikasb_leds_data __initconst = {
.leds = mx51_efikasb_leds,
.num_leds = ARRAY_SIZE(mx51_efikasb_leds),
};
static struct platform_device mx51_efikasb_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mx51_efikasb_leds_data,
},
};
static struct gpio_keys_button mx51_efikasb_keys[] = {
{
.code = KEY_POWER,
......@@ -258,9 +251,8 @@ static void __init efikasb_board_init(void)
mx51_efikasb_usb();
imx51_add_sdhci_esdhc_imx(1, NULL);
platform_device_register(&mx51_efikasb_leds_device);
gpio_led_register_device(-1, &mx51_efikasb_leds_data);
imx_add_gpio_keys(&mx51_efikasb_keys_data);
}
static void __init mx51_efikasb_timer_init(void)
......
arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
浏览文件 @ ae4c42e4
......@@ -31,13 +31,12 @@
#include "devices.h"
#define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30)
#define MBIMX51_TSC2007_IRQ (MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
#define MBIMX51_LED0 IMX_GPIO_NR(3, 5)
#define MBIMX51_LED1 IMX_GPIO_NR(3, 6)
#define MBIMX51_LED2 IMX_GPIO_NR(3, 7)
#define MBIMX51_LED3 IMX_GPIO_NR(3, 8)
static struct gpio_led mbimx51_leds[] = {
static const struct gpio_led mbimx51_leds[] __initconst = {
{
.name = "led0",
.default_trigger = "heartbeat",
......@@ -64,23 +63,11 @@ static struct gpio_led mbimx51_leds[] = {
},
};
static struct gpio_led_platform_data mbimx51_leds_info = {
static const struct gpio_led_platform_data mbimx51_leds_info __initconst = {
.leds = mbimx51_leds,
.num_leds = ARRAY_SIZE(mbimx51_leds),
};
static struct platform_device mbimx51_leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mbimx51_leds_info,
},
};
static struct platform_device *devices[] __initdata = {
&mbimx51_leds_gpio,
};
static iomux_v3_cfg_t mbimx51_pads[] = {
/* UART2 */
MX51_PAD_UART2_RXD__UART2_RXD,
......@@ -173,7 +160,7 @@ struct tsc2007_platform_data tsc2007_data = {
static struct i2c_board_info mbimx51_i2c_devices[] = {
{
I2C_BOARD_INFO("tsc2007", 0x49),
.irq = MBIMX51_TSC2007_IRQ,
.irq = gpio_to_irq(MBIMX51_TSC2007_GPIO),
.platform_data = &tsc2007_data,
}, {
I2C_BOARD_INFO("tlv320aic23", 0x1a),
......@@ -204,13 +191,14 @@ void __init eukrea_mbimx51_baseboard_init(void)
gpio_direction_output(MBIMX51_LED3, 1);
gpio_free(MBIMX51_LED3);
platform_add_devices(devices, ARRAY_SIZE(devices));
gpio_led_register_device(-1, &mbimx51_leds_info);
imx51_add_imx_keypad(&mbimx51_map_data);
gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
gpio_direction_input(MBIMX51_TSC2007_GPIO);
irq_set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
IRQF_TRIGGER_FALLING);
i2c_register_board_info(1, mbimx51_i2c_devices,
ARRAY_SIZE(mbimx51_i2c_devices));
......
arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
浏览文件 @ ae4c42e4
......@@ -74,7 +74,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
#define GPIO_LED1 IMX_GPIO_NR(3, 30)
#define GPIO_SWITCH1 IMX_GPIO_NR(3, 31)
static struct gpio_led eukrea_mbimxsd_leds[] = {
static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
{
.name = "led1",
.default_trigger = "heartbeat",
......@@ -83,19 +83,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = {
},
};
static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
static const struct gpio_led_platform_data
eukrea_mbimxsd_led_info __initconst = {
.leds = eukrea_mbimxsd_leds,
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
};
static struct platform_device eukrea_mbimxsd_leds_gpio = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &eukrea_mbimxsd_led_info,
},
};
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
{
.gpio = GPIO_SWITCH1,
......@@ -112,10 +105,6 @@ static const struct gpio_keys_platform_data
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_leds_gpio,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
......@@ -154,6 +143,6 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
arch/arm/mach-mxs/Kconfig
浏览文件 @ ae4c42e4
......@@ -55,6 +55,7 @@ config MACH_MX28EVK
config MODULE_TX28
bool
select SOC_IMX28
select LEDS_GPIO_REGISTER
select MXS_HAVE_AMBA_DUART
select MXS_HAVE_PLATFORM_AUART
select MXS_HAVE_PLATFORM_FEC
......
arch/arm/mach-mxs/mach-tx28.c
浏览文件 @ ae4c42e4
......@@ -109,7 +109,7 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
static struct gpio_led tx28_stk5v3_leds[] = {
static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
{
.name = "GPIO-LED",
.default_trigger = "heartbeat",
......@@ -151,8 +151,7 @@ static void __init tx28_stk5v3_init(void)
/* spi via ssp will be added when available */
spi_register_board_info(tx28_spi_board_info,
ARRAY_SIZE(tx28_spi_board_info));
mxs_add_platform_device("leds-gpio", 0, NULL, 0,
&tx28_stk5v3_led_data, sizeof(tx28_stk5v3_led_data));
gpio_led_register_device(0, &tx28_stk5v3_led_data);
mx28_add_mxs_i2c(0);
i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
......
arch/arm/mach-omap1/board-ams-delta.c
浏览文件 @ ae4c42e4
......@@ -138,7 +138,7 @@ void ams_delta_latch2_write(u16 mask, u16 value)
static void __init ams_delta_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static struct map_desc ams_delta_io_desc[] __initdata = {
......@@ -391,7 +391,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
.reserve = omap_reserve,
.init_irq = ams_delta_init_irq,
.init_machine = ams_delta_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
EXPORT_SYMBOL(ams_delta_latch1_write);
......
arch/arm/mach-omap1/board-fsample.c
浏览文件 @ ae4c42e4
......@@ -329,7 +329,7 @@ static void __init omap_fsample_init(void)
static void __init omap_fsample_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
......@@ -394,5 +394,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
.reserve = omap_reserve,
.init_irq = omap_fsample_init_irq,
.init_machine = omap_fsample_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-generic.c
浏览文件 @ ae4c42e4
......@@ -31,7 +31,7 @@
static void __init omap_generic_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
/* assume no Mini-AB port */
......@@ -99,5 +99,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
.reserve = omap_reserve,
.init_irq = omap_generic_init_irq,
.init_machine = omap_generic_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-h2.c
浏览文件 @ ae4c42e4
......@@ -376,7 +376,7 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = {
static void __init h2_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static struct omap_usb_config h2_usb_config __initdata = {
......@@ -466,5 +466,5 @@ MACHINE_START(OMAP_H2, "TI-H2")
.reserve = omap_reserve,
.init_irq = h2_init_irq,
.init_machine = h2_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-h3.c
浏览文件 @ ae4c42e4
......@@ -439,7 +439,7 @@ static void __init h3_init(void)
static void __init h3_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static void __init h3_map_io(void)
......@@ -454,5 +454,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
.reserve = omap_reserve,
.init_irq = h3_init_irq,
.init_machine = h3_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-htcherald.c
浏览文件 @ ae4c42e4
......@@ -605,7 +605,7 @@ static void __init htcherald_init_irq(void)
{
printk(KERN_INFO "htcherald_init_irq.\n");
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
MACHINE_START(HERALD, "HTC Herald")
......@@ -616,5 +616,5 @@ MACHINE_START(HERALD, "HTC Herald")
.reserve = omap_reserve,
.init_irq = htcherald_init_irq,
.init_machine = htcherald_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-innovator.c
浏览文件 @ ae4c42e4
......@@ -292,7 +292,7 @@ static void __init innovator_init_smc91x(void)
static void __init innovator_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
#ifdef CONFIG_ARCH_OMAP15XX
......@@ -464,5 +464,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
.reserve = omap_reserve,
.init_irq = innovator_init_irq,
.init_machine = innovator_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-nokia770.c
浏览文件 @ ae4c42e4
......@@ -51,7 +51,7 @@ static void __init omap_nokia770_init_irq(void)
omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static const unsigned int nokia770_keymap[] = {
......@@ -269,5 +269,5 @@ MACHINE_START(NOKIA770, "Nokia 770")
.reserve = omap_reserve,
.init_irq = omap_nokia770_init_irq,
.init_machine = omap_nokia770_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-osk.c
浏览文件 @ ae4c42e4
......@@ -282,7 +282,7 @@ static void __init osk_init_cf(void)
static void __init osk_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static struct omap_usb_config osk_usb_config __initdata = {
......@@ -588,5 +588,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
.reserve = omap_reserve,
.init_irq = osk_init_irq,
.init_machine = osk_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-palmte.c
浏览文件 @ ae4c42e4
......@@ -62,7 +62,7 @@
static void __init omap_palmte_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static const unsigned int palmte_keymap[] = {
......@@ -280,5 +280,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
.reserve = omap_reserve,
.init_irq = omap_palmte_init_irq,
.init_machine = omap_palmte_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-palmtt.c
浏览文件 @ ae4c42e4
......@@ -266,7 +266,7 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
static void __init omap_palmtt_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static struct omap_usb_config palmtt_usb_config __initdata = {
......@@ -326,5 +326,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
.reserve = omap_reserve,
.init_irq = omap_palmtt_init_irq,
.init_machine = omap_palmtt_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-palmz71.c
浏览文件 @ ae4c42e4
......@@ -61,7 +61,7 @@ static void __init
omap_palmz71_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static const unsigned int palmz71_keymap[] = {
......@@ -346,5 +346,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
.reserve = omap_reserve,
.init_irq = omap_palmz71_init_irq,
.init_machine = omap_palmz71_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-perseus2.c
浏览文件 @ ae4c42e4
......@@ -297,7 +297,7 @@ static void __init omap_perseus2_init(void)
static void __init omap_perseus2_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
......@@ -355,5 +355,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
.reserve = omap_reserve,
.init_irq = omap_perseus2_init_irq,
.init_machine = omap_perseus2_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-sx1.c
浏览文件 @ ae4c42e4
......@@ -411,7 +411,7 @@ static void __init omap_sx1_init(void)
static void __init omap_sx1_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
/*----------------------------------------*/
......@@ -426,5 +426,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
.reserve = omap_reserve,
.init_irq = omap_sx1_init_irq,
.init_machine = omap_sx1_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-voiceblue.c
浏览文件 @ ae4c42e4
......@@ -162,7 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = {
static void __init voiceblue_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static void __init voiceblue_map_io(void)
......@@ -306,5 +306,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
.reserve = omap_reserve,
.init_irq = voiceblue_init_irq,
.init_machine = voiceblue_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/irq.c
浏览文件 @ ae4c42e4
......@@ -175,7 +175,7 @@ static struct irq_chip omap_irq_chip = {
.irq_set_wake = omap_wake_irq,
};
void __init omap_init_irq(void)
void __init omap1_init_irq(void)
{
int i, j;
......
arch/arm/mach-omap1/mcbsp.c
浏览文件 @ ae4c42e4
......@@ -38,7 +38,7 @@ static void omap1_mcbsp_request(unsigned int id)
* On 1510, 1610 and 1710, McBSP1 and McBSP3
* are DSP public peripherals.
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (id == 0 || id == 2) {
if (dsp_use++ == 0) {
api_clk = clk_get(NULL, "api_ck");
dsp_clk = clk_get(NULL, "dsp_ck");
......@@ -59,7 +59,7 @@ static void omap1_mcbsp_request(unsigned int id)
static void omap1_mcbsp_free(unsigned int id)
{
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (id == 0 || id == 2) {
if (--dsp_use == 0) {
if (!IS_ERR(api_clk)) {
clk_disable(api_clk);
......
arch/arm/mach-omap1/time.c
浏览文件 @ ae4c42e4
......@@ -297,7 +297,7 @@ static inline int omap_32k_timer_usable(void)
* Timer initialization
* ---------------------------------------------------------------------------
*/
static void __init omap_timer_init(void)
static void __init omap1_timer_init(void)
{
if (omap_32k_timer_usable()) {
preferred_sched_clock_init(1);
......@@ -307,6 +307,6 @@ static void __init omap_timer_init(void)
}
}
struct sys_timer omap_timer = {
.init = omap_timer_init,
struct sys_timer omap1_timer = {
.init = omap1_timer_init,
};
arch/arm/mach-omap1/timer32k.c
浏览文件 @ ae4c42e4
......@@ -183,10 +183,6 @@ static __init void omap_init_32k_timer(void)
bool __init omap_32k_timer_init(void)
{
omap_init_clocksource_32k();
#ifdef CONFIG_OMAP_DM_TIMER
omap_dm_timer_init();
#endif
omap_init_32k_timer();
return true;
......
arch/arm/mach-omap2/Makefile
浏览文件 @ ae4c42e4
......@@ -3,7 +3,7 @@
#
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o
omap-2-3-common = irq.o sdrc.o
......@@ -145,9 +145,19 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o \
omap_hwmod_2xxx_3xxx_ipblock_data.o \
omap_hwmod_2xxx_interconnect_data.o \
omap_hwmod_2xxx_3xxx_interconnect_data.o \
omap_hwmod_2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o \
omap_hwmod_2xxx_3xxx_ipblock_data.o \
omap_hwmod_2xxx_interconnect_data.o \
omap_hwmod_2xxx_3xxx_interconnect_data.o \
omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o \
omap_hwmod_2xxx_3xxx_interconnect_data.o \
omap_hwmod_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
......@@ -269,4 +279,4 @@ obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
disp-$(CONFIG_OMAP2_DSS) := display.o
obj-y += $(disp-m) $(disp-y)
obj-y += common-board-devices.o
obj-y += common-board-devices.o twl-common.o
arch/arm/mach-omap2/board-2430sdp.c
浏览文件 @ ae4c42e4
......@@ -260,7 +260,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
.reserve = omap_reserve,
.map_io = omap_2430sdp_map_io,
.init_early = omap_2430sdp_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
arch/arm/mach-omap2/board-3430sdp.c
浏览文件 @ ae4c42e4
......@@ -231,22 +231,6 @@ static void __init omap_3430sdp_init_early(void)
omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
}
static int sdp3430_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
4040, 3910, 3790, 3670, 3550
};
static struct twl4030_bci_platform_data sdp3430_bci_data = {
.battery_tmp_tbl = sdp3430_batt_table,
.tblsize = ARRAY_SIZE(sdp3430_batt_table),
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
......@@ -292,14 +276,6 @@ static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
.setup = sdp3430_twl_gpio_setup,
};
static struct twl4030_usb_data sdp3430_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_madc_platform_data sdp3430_madc_data = {
.irq_line = 1,
};
/* regulator consumer mappings */
/* ads7846 on SPI */
......@@ -307,16 +283,6 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
};
static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
......@@ -433,54 +399,10 @@ static struct regulator_init_data sdp3430_vsim = {
.consumer_supplies = sdp3430_vsim_supplies,
};
/* VDAC for DSS driving S-Video */
static struct regulator_init_data sdp3430_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies),
.consumer_supplies = sdp3430_vdda_dac_supplies,
};
static struct regulator_init_data sdp3430_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies),
.consumer_supplies = sdp3430_vpll2_supplies,
};
static struct twl4030_codec_audio_data sdp3430_audio;
static struct twl4030_codec_data sdp3430_codec = {
.audio_mclk = 26000000,
.audio = &sdp3430_audio,
};
static struct twl4030_platform_data sdp3430_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.bci = &sdp3430_bci_data,
.gpio = &sdp3430_gpio_data,
.madc = &sdp3430_madc_data,
.keypad = &sdp3430_kp_data,
.usb = &sdp3430_usb_data,
.codec = &sdp3430_codec,
.vaux1 = &sdp3430_vaux1,
.vaux2 = &sdp3430_vaux2,
......@@ -489,14 +411,21 @@ static struct twl4030_platform_data sdp3430_twldata = {
.vmmc1 = &sdp3430_vmmc1,
.vmmc2 = &sdp3430_vmmc2,
.vsim = &sdp3430_vsim,
.vdac = &sdp3430_vdac,
.vpll2 = &sdp3430_vpll2,
};
static int __init omap3430_i2c_init(void)
{
/* i2c1 for PMIC only */
omap3_pmic_get_config(&sdp3430_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
sdp3430_twldata.vdac->constraints.apply_uV = true;
sdp3430_twldata.vpll2->constraints.apply_uV = true;
sdp3430_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("twl4030", &sdp3430_twldata);
/* i2c2 on camera connector (for sensor control) and optional isp1301 */
omap_register_i2c_bus(2, 400, NULL, 0);
/* i2c3 on display connector (for DVI, tfp410) */
......@@ -804,7 +733,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_3430sdp_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-3630sdp.c
浏览文件 @ ae4c42e4
......@@ -219,7 +219,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_sdp_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-4430sdp.c
浏览文件 @ ae4c42e4
......@@ -40,7 +40,6 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "control.h"
#include "common-board-devices.h"
......@@ -295,9 +294,6 @@ static void __init omap_4430sdp_init_early(void)
{
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(1);
#endif
}
static struct omap_musb_board_data musb_board_data = {
......@@ -306,14 +302,6 @@ static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
static struct twl4030_usb_data omap4_usbphy_data = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 2,
......@@ -333,16 +321,7 @@ static struct omap2_hsmmc_info mmc[] = {
};
static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
{
.supply = "vmmc",
.dev_name = "omap_hsmmc.1",
},
};
static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
{
.supply = "vmmc",
.dev_name = "omap_hsmmc.0",
},
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
......@@ -399,65 +378,10 @@ static struct regulator_init_data sdp4430_vaux1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.num_consumer_supplies = ARRAY_SIZE(sdp4430_vaux_supply),
.consumer_supplies = sdp4430_vaux_supply,
};
static struct regulator_init_data sdp4430_vaux2 = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vaux3 = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
/* VMMC1 for MMC1 card */
static struct regulator_init_data sdp4430_vmmc = {
.constraints = {
.min_uV = 1200000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = sdp4430_vmmc_supply,
};
static struct regulator_init_data sdp4430_vpp = {
.constraints = {
.min_uV = 1800000,
.max_uV = 2500000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vusim = {
.constraints = {
.min_uV = 1200000,
......@@ -471,74 +395,10 @@ static struct regulator_init_data sdp4430_vusim = {
},
};
static struct regulator_init_data sdp4430_vana = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vcxio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vusb = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_clk32kg = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static struct twl4030_platform_data sdp4430_twldata = {
.irq_base = TWL6030_IRQ_BASE,
.irq_end = TWL6030_IRQ_END,
/* Regulators */
.vmmc = &sdp4430_vmmc,
.vpp = &sdp4430_vpp,
.vusim = &sdp4430_vusim,
.vana = &sdp4430_vana,
.vcxio = &sdp4430_vcxio,
.vdac = &sdp4430_vdac,
.vusb = &sdp4430_vusb,
.vaux1 = &sdp4430_vaux1,
.vaux2 = &sdp4430_vaux2,
.vaux3 = &sdp4430_vaux3,
.clk32kg = &sdp4430_clk32kg,
.usb = &omap4_usbphy_data
};
static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
......@@ -556,6 +416,16 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
};
static int __init omap4_i2c_init(void)
{
omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VDAC |
TWL_COMMON_REGULATOR_VAUX2 |
TWL_COMMON_REGULATOR_VAUX3 |
TWL_COMMON_REGULATOR_VMMC |
TWL_COMMON_REGULATOR_VPP |
TWL_COMMON_REGULATOR_VANA |
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
......@@ -773,5 +643,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
.init_early = omap_4430sdp_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap_timer,
.timer = &omap4_timer,
MACHINE_END
arch/arm/mach-omap2/board-am3517crane.c
浏览文件 @ ae4c42e4
......@@ -104,7 +104,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = am3517_crane_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = am3517_crane_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-am3517evm.c
浏览文件 @ ae4c42e4
......@@ -494,7 +494,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = am3517_evm_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = am3517_evm_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-apollon.c
浏览文件 @ ae4c42e4
......@@ -354,7 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
.reserve = omap_reserve,
.map_io = omap_apollon_map_io,
.init_early = omap_apollon_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = omap_apollon_init,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
arch/arm/mach-omap2/board-cm-t35.c
浏览文件 @ ae4c42e4
......@@ -162,9 +162,7 @@ static struct mtd_partition cm_t35_nand_partitions[] = {
static struct omap_nand_platform_data cm_t35_nand_data = {
.parts = cm_t35_nand_partitions,
.nr_parts = ARRAY_SIZE(cm_t35_nand_partitions),
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
.cs = 0,
};
static void __init cm_t35_init_nand(void)
......@@ -337,19 +335,17 @@ static void __init cm_t35_init_display(void)
}
}
static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply cm_t35_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply cm_t35_vdac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static struct regulator_consumer_supply cm_t35_vdvi_supply =
REGULATOR_SUPPLY("vdvi", "omapdss");
static struct regulator_consumer_supply cm_t35_vdvi_supply[] = {
REGULATOR_SUPPLY("vdvi", "omapdss"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data cm_t35_vmmc1 = {
......@@ -362,8 +358,8 @@ static struct regulator_init_data cm_t35_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &cm_t35_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply),
.consumer_supplies = cm_t35_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
......@@ -377,41 +373,8 @@ static struct regulator_init_data cm_t35_vsim = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &cm_t35_vsim_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data cm_t35_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &cm_t35_vdac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data cm_t35_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &cm_t35_vdvi_supply,
};
static struct twl4030_usb_data cm_t35_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
.num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply),
.consumer_supplies = cm_t35_vsim_supply,
};
static uint32_t cm_t35_keymap[] = {
......@@ -481,10 +444,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
cm_t35_vmmc1_supply.dev = mmc[0].dev;
cm_t35_vsim_supply.dev = mmc[0].dev;
return 0;
}
......@@ -496,21 +455,23 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
};
static struct twl4030_platform_data cm_t35_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &cm_t35_kp_data,
.usb = &cm_t35_usb_data,
.gpio = &cm_t35_gpio_data,
.vmmc1 = &cm_t35_vmmc1,
.vsim = &cm_t35_vsim,
.vdac = &cm_t35_vdac,
.vpll2 = &cm_t35_vpll2,
};
static void __init cm_t35_init_i2c(void)
{
omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
cm_t35_twldata.vpll2->constraints.name = "VDVI";
cm_t35_twldata.vpll2->num_consumer_supplies =
ARRAY_SIZE(cm_t35_vdvi_supply);
cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply;
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
......@@ -646,7 +607,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t35_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = cm_t35_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-cm-t3517.c
浏览文件 @ ae4c42e4
......@@ -236,7 +236,6 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
static struct omap_nand_platform_data cm_t3517_nand_data = {
.parts = cm_t3517_nand_partitions,
.nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions),
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
.cs = 0,
};
......@@ -304,7 +303,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t3517_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = cm_t3517_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-devkit8000.c
浏览文件 @ ae4c42e4
......@@ -58,7 +58,6 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "common-board-devices.h"
#define OMAP_DM9000_GPIO_IRQ 25
......@@ -130,13 +129,14 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
static struct regulator_consumer_supply devkit8000_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* ads7846 on SPI */
static struct regulator_consumer_supply devkit8000_vio_supply =
REGULATOR_SUPPLY("vcc", "spi2.0");
static struct regulator_consumer_supply devkit8000_vio_supply[] = {
REGULATOR_SUPPLY("vcc", "spi2.0"),
};
static struct panel_generic_dpi_data lcd_panel = {
.name = "generic",
......@@ -186,9 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = {
.default_device = &devkit8000_lcd_device,
};
static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_1),
KEY(1, 0, KEY_2),
......@@ -284,22 +281,8 @@ static struct regulator_init_data devkit8000_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &devkit8000_vmmc1_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data devkit8000_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &devkit8000_vdda_dac_supply,
.num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply),
.consumer_supplies = devkit8000_vmmc1_supply,
};
/* VPLL1 for digital video outputs */
......@@ -327,31 +310,14 @@ static struct regulator_init_data devkit8000_vio = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &devkit8000_vio_supply,
};
static struct twl4030_usb_data devkit8000_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data devkit8000_audio_data;
static struct twl4030_codec_data devkit8000_codec_data = {
.audio_mclk = 26000000,
.audio = &devkit8000_audio_data,
.num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply),
.consumer_supplies = devkit8000_vio_supply,
};
static struct twl4030_platform_data devkit8000_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &devkit8000_usb_data,
.gpio = &devkit8000_gpio_data,
.codec = &devkit8000_codec_data,
.vmmc1 = &devkit8000_vmmc1,
.vdac = &devkit8000_vdac,
.vpll1 = &devkit8000_vpll1,
.vio = &devkit8000_vio,
.keypad = &devkit8000_kp_data,
......@@ -359,6 +325,9 @@ static struct twl4030_platform_data devkit8000_twldata = {
static int __init devkit8000_i2c_init(void)
{
omap3_pmic_get_config(&devkit8000_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC);
omap3_pmic_init("tps65930", &devkit8000_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
......@@ -438,10 +407,7 @@ static void __init devkit8000_init_early(void)
static void __init devkit8000_init_irq(void)
{
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap3_init_irq();
}
#define OMAP_DM9000_BASE 0x2c000000
......@@ -707,5 +673,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
.init_early = devkit8000_init_early,
.init_irq = devkit8000_init_irq,
.init_machine = devkit8000_init,
.timer = &omap_timer,
.timer = &omap3_secure_timer,
MACHINE_END
arch/arm/mach-omap2/board-flash.c
浏览文件 @ ae4c42e4
......@@ -132,11 +132,7 @@ static struct gpmc_timings nand_timings = {
};
static struct omap_nand_platform_data board_nand_data = {
.nand_setup = NULL,
.gpmc_t = &nand_timings,
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
.dev_ready = NULL,
.devsize = 0, /* '0' for 8-bit, '1' for 16-bit device */
};
void
......
arch/arm/mach-omap2/board-generic.c
浏览文件 @ ae4c42e4
......@@ -70,7 +70,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
.reserve = omap_reserve,
.map_io = omap_generic_map_io,
.init_early = omap_generic_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = omap_generic_init,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
arch/arm/mach-omap2/board-h4.c
浏览文件 @ ae4c42e4
......@@ -298,7 +298,7 @@ static void __init omap_h4_init_early(void)
static void __init omap_h4_init_irq(void)
{
omap_init_irq();
omap2_init_irq();
}
static struct at24_platform_data m24c01 = {
......@@ -388,5 +388,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
.init_early = omap_h4_init_early,
.init_irq = omap_h4_init_irq,
.init_machine = omap_h4_init,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
arch/arm/mach-omap2/board-igep0020.c
浏览文件 @ ae4c42e4
......@@ -222,8 +222,9 @@ static inline void __init igep2_init_smsc911x(void)
static inline void __init igep2_init_smsc911x(void) { }
#endif
static struct regulator_consumer_supply igep_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
static struct regulator_consumer_supply igep_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep_vmmc1 = {
......@@ -236,12 +237,13 @@ static struct regulator_init_data igep_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &igep_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply),
.consumer_supplies = igep_vmmc1_supply,
};
static struct regulator_consumer_supply igep_vio_supply =
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
static struct regulator_consumer_supply igep_vio_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
};
static struct regulator_init_data igep_vio = {
.constraints = {
......@@ -254,20 +256,21 @@ static struct regulator_init_data igep_vio = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &igep_vio_supply,
.num_consumer_supplies = ARRAY_SIZE(igep_vio_supply),
.consumer_supplies = igep_vio_supply,
};
static struct regulator_consumer_supply igep_vmmc2_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
static struct regulator_consumer_supply igep_vmmc2_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static struct regulator_init_data igep_vmmc2 = {
.constraints = {
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.always_on = 1,
},
.num_consumer_supplies = 1,
.consumer_supplies = &igep_vmmc2_supply,
.num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply),
.consumer_supplies = igep_vmmc2_supply,
};
static struct fixed_voltage_config igep_vwlan = {
......@@ -440,10 +443,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
.setup = igep_twl_gpio_setup,
};
static struct twl4030_usb_data igep_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static int igep2_enable_dvi(struct omap_dss_device *dssdev)
{
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
......@@ -480,26 +479,6 @@ static struct omap_dss_board_info igep2_dss_data = {
.default_device = &igep2_dvi_device,
};
static struct regulator_consumer_supply igep2_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data igep2_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies),
.consumer_supplies = igep2_vpll2_supplies,
};
static void __init igep2_display_init(void)
{
int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
......@@ -519,13 +498,6 @@ static void __init igep_init_early(void)
m65kxxxxam_sdrc_params);
}
static struct twl4030_codec_audio_data igep2_audio_data;
static struct twl4030_codec_data igep2_codec_data = {
.audio_mclk = 26000000,
.audio = &igep2_audio_data,
};
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
......@@ -558,11 +530,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = {
};
static struct twl4030_platform_data igep_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &igep_usb_data,
.gpio = &igep_twl4030_gpio_pdata,
.vmmc1 = &igep_vmmc1,
.vio = &igep_vio,
......@@ -578,6 +546,8 @@ static void __init igep_i2c_init(void)
{
int ret;
omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
if (machine_is_igep0020()) {
/*
* Bus 3 is attached to the DVI port where devices like the
......@@ -588,9 +558,12 @@ static void __init igep_i2c_init(void)
if (ret)
pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
igep_twldata.codec = &igep2_codec_data;
igep_twldata.keypad = &igep2_keypad_pdata;
igep_twldata.vpll2 = &igep2_vpll2;
/* Get common pmic data */
omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VPLL2);
igep_twldata.vpll2->constraints.apply_uV = true;
igep_twldata.vpll2->constraints.name = "VDVI";
}
omap3_pmic_init("twl4030", &igep_twldata);
......@@ -703,9 +676,9 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = igep_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
......@@ -713,7 +686,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = igep_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-ldp.c
浏览文件 @ ae4c42e4
......@@ -199,22 +199,14 @@ static void __init omap_ldp_init_early(void)
omap2_init_common_devices(NULL, NULL);
}
static struct twl4030_usb_data ldp_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
};
static struct twl4030_madc_platform_data ldp_madc_data = {
.irq_line = 1,
};
static struct regulator_consumer_supply ldp_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......@@ -228,8 +220,8 @@ static struct regulator_init_data ldp_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &ldp_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply),
.consumer_supplies = ldp_vmmc1_supply,
};
/* ads7846 on SPI */
......@@ -253,12 +245,7 @@ static struct regulator_init_data ldp_vaux1 = {
};
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.madc = &ldp_madc_data,
.usb = &ldp_usb_data,
.vmmc1 = &ldp_vmmc1,
.vaux1 = &ldp_vaux1,
.gpio = &ldp_gpio_data,
......@@ -267,6 +254,8 @@ static struct twl4030_platform_data ldp_twldata = {
static int __init omap_i2c_init(void)
{
omap3_pmic_get_config(&ldp_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
omap3_pmic_init("twl4030", &ldp_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
......@@ -341,8 +330,6 @@ static void __init omap_ldp_init(void)
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
ldp_vmmc1_supply.dev = mmc[0].dev;
}
MACHINE_START(OMAP_LDP, "OMAP LDP board")
......@@ -350,7 +337,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_ldp_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-n8x0.c
浏览文件 @ ae4c42e4
......@@ -699,9 +699,9 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
......@@ -709,9 +709,9 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
......@@ -719,7 +719,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3beagle.c
浏览文件 @ ae4c42e4
......@@ -50,7 +50,6 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "pm.h"
#include "common-board-devices.h"
......@@ -210,14 +209,6 @@ static struct omap_dss_board_info beagle_dss_data = {
.default_device = &beagle_dvi_device,
};
static struct regulator_consumer_supply beagle_vdac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static void __init beagle_display_init(void)
{
int r;
......@@ -239,12 +230,12 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct regulator_consumer_supply beagle_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply beagle_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply beagle_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply beagle_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
static struct gpio_led gpio_leds[];
......@@ -267,10 +258,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
beagle_vmmc1_supply.dev = mmc[0].dev;
beagle_vsim_supply.dev = mmc[0].dev;
/*
* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
* high / others active low)
......@@ -336,8 +323,8 @@ static struct regulator_init_data beagle_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &beagle_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(beagle_vmmc1_supply),
.consumer_supplies = beagle_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
......@@ -351,62 +338,15 @@ static struct regulator_init_data beagle_vsim = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &beagle_vsim_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data beagle_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &beagle_vdac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data beagle_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies),
.consumer_supplies = beagle_vdvi_supplies,
};
static struct twl4030_usb_data beagle_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data beagle_audio_data;
static struct twl4030_codec_data beagle_codec_data = {
.audio_mclk = 26000000,
.audio = &beagle_audio_data,
.num_consumer_supplies = ARRAY_SIZE(beagle_vsim_supply),
.consumer_supplies = beagle_vsim_supply,
};
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
.codec = &beagle_codec_data,
.vmmc1 = &beagle_vmmc1,
.vsim = &beagle_vsim,
.vdac = &beagle_vdac,
.vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
......@@ -417,6 +357,12 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
static int __init omap3_beagle_i2c_init(void)
{
omap3_pmic_get_config(&beagle_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
beagle_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("twl4030", &beagle_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
......@@ -486,10 +432,7 @@ static void __init omap3_beagle_init_early(void)
static void __init omap3_beagle_init_irq(void)
{
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap3_init_irq();
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
......@@ -599,5 +542,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
.init_early = omap3_beagle_init_early,
.init_irq = omap3_beagle_init_irq,
.init_machine = omap3_beagle_init,
.timer = &omap_timer,
.timer = &omap3_secure_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3evm.c
浏览文件 @ ae4c42e4
......@@ -273,12 +273,12 @@ static struct omap_dss_board_info omap3_evm_dss_data = {
.default_device = &omap3_evm_lcd_device,
};
static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply omap3evm_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......@@ -292,8 +292,8 @@ static struct regulator_init_data omap3evm_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc1_supply),
.consumer_supplies = omap3evm_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
......@@ -307,8 +307,8 @@ static struct regulator_init_data omap3evm_vsim = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vsim_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3evm_vsim_supply),
.consumer_supplies = omap3evm_vsim_supply,
};
static struct omap2_hsmmc_info mmc[] = {
......@@ -365,10 +365,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
omap3evm_vmmc1_supply.dev = mmc[0].dev;
omap3evm_vsim_supply.dev = mmc[0].dev;
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
......@@ -400,10 +396,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
.setup = omap3evm_twl_gpio_setup,
};
static struct twl4030_usb_data omap3evm_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
......@@ -438,58 +430,10 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
.rep = 1,
};
static struct twl4030_madc_platform_data omap3evm_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data omap3evm_audio_data;
static struct twl4030_codec_data omap3evm_codec_data = {
.audio_mclk = 26000000,
.audio = &omap3evm_audio_data,
};
static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_evm_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3_evm_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data omap3_evm_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies),
.consumer_supplies = omap3_evm_vpll2_supplies,
};
/* ads7846 on SPI */
static struct regulator_consumer_supply omap3evm_vio_supply =
REGULATOR_SUPPLY("vcc", "spi1.0");
static struct regulator_consumer_supply omap3evm_vio_supply[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
};
/* VIO for ads7846 */
static struct regulator_init_data omap3evm_vio = {
......@@ -502,8 +446,8 @@ static struct regulator_init_data omap3evm_vio = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vio_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3evm_vio_supply),
.consumer_supplies = omap3evm_vio_supply,
};
#ifdef CONFIG_WL12XX_PLATFORM_DATA
......@@ -511,16 +455,17 @@ static struct regulator_init_data omap3evm_vio = {
#define OMAP3EVM_WLAN_PMENA_GPIO (150)
#define OMAP3EVM_WLAN_IRQ_GPIO (149)
static struct regulator_consumer_supply omap3evm_vmmc2_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
/* VMMC2 for driving the WL12xx module */
static struct regulator_init_data omap3evm_vmmc2 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vmmc2_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc2_supply),
.consumer_supplies = omap3evm_vmmc2_supply,
};
static struct fixed_voltage_config omap3evm_vwlan = {
......@@ -548,17 +493,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
#endif
static struct twl4030_platform_data omap3evm_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
.madc = &omap3evm_madc_data,
.usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
.codec = &omap3evm_codec_data,
.vdac = &omap3_evm_vdac,
.vpll2 = &omap3_evm_vpll2,
.vio = &omap3evm_vio,
.vmmc1 = &omap3evm_vmmc1,
.vsim = &omap3evm_vsim,
......@@ -566,6 +503,14 @@ static struct twl4030_platform_data omap3evm_twldata = {
static int __init omap3_evm_i2c_init(void)
{
omap3_pmic_get_config(&omap3evm_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
omap3evm_twldata.vdac->constraints.apply_uV = true;
omap3evm_twldata.vpll2->constraints.apply_uV = true;
omap3_pmic_init("twl4030", &omap3evm_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
......@@ -740,7 +685,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_evm_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3logic.c
浏览文件 @ ae4c42e4
......@@ -35,7 +35,6 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "control.h"
#include "common-board-devices.h"
......@@ -55,8 +54,8 @@
#define OMAP3_TORPEDO_MMC_GPIO_CD 127
#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129
static struct regulator_consumer_supply omap3logic_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......@@ -71,8 +70,8 @@ static struct regulator_init_data omap3logic_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3logic_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3logic_vmmc1_supply),
.consumer_supplies = omap3logic_vmmc1_supply,
};
static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
......@@ -130,8 +129,6 @@ static void __init board_mmc_init(void)
}
omap2_hsmmc_init(board_mmc_info);
/* link regulators to MMC adapters */
omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
}
static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
......@@ -215,16 +212,16 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,
.init_early = omap3logic_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,
.init_early = omap3logic_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3pandora.c
浏览文件 @ ae4c42e4
......@@ -320,17 +320,17 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
.setup = omap3pandora_twl_gpio_setup,
};
static struct regulator_consumer_supply pandora_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
static struct regulator_consumer_supply pandora_vmmc2_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply pandora_vmmc3_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
};
static struct regulator_consumer_supply pandora_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
};
static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
......@@ -338,11 +338,13 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_consumer_supply pandora_vcc_lcd_supply =
REGULATOR_SUPPLY("vcc", "display0");
static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
REGULATOR_SUPPLY("vcc", "display0"),
};
static struct regulator_consumer_supply pandora_usb_phy_supply =
REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"),
};
/* ads7846 on SPI and 2 nub controllers on I2C */
static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
......@@ -351,8 +353,9 @@ static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
REGULATOR_SUPPLY("vcc", "3-0067"),
};
static struct regulator_consumer_supply pandora_adac_supply =
REGULATOR_SUPPLY("vcc", "soc-audio");
static struct regulator_consumer_supply pandora_adac_supply[] = {
REGULATOR_SUPPLY("vcc", "soc-audio"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data pandora_vmmc1 = {
......@@ -365,8 +368,8 @@ static struct regulator_init_data pandora_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(pandora_vmmc1_supply),
.consumer_supplies = pandora_vmmc1_supply,
};
/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
......@@ -380,38 +383,8 @@ static struct regulator_init_data pandora_vmmc2 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_vmmc2_supply,
};
/* VDAC for DSS driving S-Video */
static struct regulator_init_data pandora_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data pandora_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies),
.consumer_supplies = pandora_vdds_supplies,
.num_consumer_supplies = ARRAY_SIZE(pandora_vmmc2_supply),
.consumer_supplies = pandora_vmmc2_supply,
};
/* VAUX1 for LCD */
......@@ -425,8 +398,8 @@ static struct regulator_init_data pandora_vaux1 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_vcc_lcd_supply,
.num_consumer_supplies = ARRAY_SIZE(pandora_vcc_lcd_supply),
.consumer_supplies = pandora_vcc_lcd_supply,
};
/* VAUX2 for USB host PHY */
......@@ -440,8 +413,8 @@ static struct regulator_init_data pandora_vaux2 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_usb_phy_supply,
.num_consumer_supplies = ARRAY_SIZE(pandora_usb_phy_supply),
.consumer_supplies = pandora_usb_phy_supply,
};
/* VAUX4 for ads7846 and nubs */
......@@ -470,8 +443,8 @@ static struct regulator_init_data pandora_vsim = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_adac_supply,
.num_consumer_supplies = ARRAY_SIZE(pandora_adac_supply),
.consumer_supplies = pandora_adac_supply,
};
/* Fixed regulator internal to Wifi module */
......@@ -479,8 +452,8 @@ static struct regulator_init_data pandora_vmmc3 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_vmmc3_supply,
.num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply),
.consumer_supplies = pandora_vmmc3_supply,
};
static struct fixed_voltage_config pandora_vwlan = {
......@@ -501,29 +474,12 @@ static struct platform_device pandora_vwlan_device = {
},
};
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data omap3pandora_audio_data;
static struct twl4030_codec_data omap3pandora_codec_data = {
.audio_mclk = 26000000,
.audio = &omap3pandora_audio_data,
};
static struct twl4030_bci_platform_data pandora_bci_data;
static struct twl4030_platform_data omap3pandora_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &omap3pandora_gpio_data,
.usb = &omap3pandora_usb_data,
.codec = &omap3pandora_codec_data,
.vmmc1 = &pandora_vmmc1,
.vmmc2 = &pandora_vmmc2,
.vdac = &pandora_vdac,
.vpll2 = &pandora_vpll2,
.vaux1 = &pandora_vaux1,
.vaux2 = &pandora_vaux2,
.vaux4 = &pandora_vaux4,
......@@ -541,6 +497,17 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
static int __init omap3pandora_i2c_init(void)
{
omap3_pmic_get_config(&omap3pandora_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
omap3pandora_twldata.vdac->constraints.apply_uV = true;
omap3pandora_twldata.vpll2->constraints.apply_uV = true;
omap3pandora_twldata.vpll2->num_consumer_supplies =
ARRAY_SIZE(pandora_vdds_supplies);
omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
omap3_pmic_init("tps65950", &omap3pandora_twldata);
/* i2c2 pins are not connected */
omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
......@@ -643,7 +610,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3pandora_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3stalker.c
浏览文件 @ ae4c42e4
......@@ -52,7 +52,6 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "common-board-devices.h"
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
......@@ -206,12 +205,12 @@ static struct omap_dss_board_info omap3_stalker_dss_data = {
.default_device = &omap3_stalker_dvi_device,
};
static struct regulator_consumer_supply omap3stalker_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply omap3stalker_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply omap3stalker_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......@@ -224,8 +223,8 @@ static struct regulator_init_data omap3stalker_vmmc1 = {
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3stalker_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply),
.consumer_supplies = omap3stalker_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
......@@ -238,8 +237,8 @@ static struct regulator_init_data omap3stalker_vsim = {
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3stalker_vsim_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply),
.consumer_supplies = omap3stalker_vsim_supply,
};
static struct omap2_hsmmc_info mmc[] = {
......@@ -321,10 +320,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
omap3stalker_vmmc1_supply.dev = mmc[0].dev;
omap3stalker_vsim_supply.dev = mmc[0].dev;
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
......@@ -354,10 +349,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
.setup = omap3stalker_twl_gpio_setup,
};
static struct twl4030_usb_data omap3stalker_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
......@@ -392,68 +383,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = {
.rep = 1,
};
static struct twl4030_madc_platform_data omap3stalker_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data omap3stalker_audio_data;
static struct twl4030_codec_data omap3stalker_codec_data = {
.audio_mclk = 26000000,
.audio = &omap3stalker_audio_data,
};
static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_stalker_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3_stalker_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data omap3_stalker_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies),
.consumer_supplies = omap3_stalker_vpll2_supplies,
};
static struct twl4030_platform_data omap3stalker_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &omap3stalker_kp_data,
.madc = &omap3stalker_madc_data,
.usb = &omap3stalker_usb_data,
.gpio = &omap3stalker_gpio_data,
.codec = &omap3stalker_codec_data,
.vdac = &omap3_stalker_vdac,
.vpll2 = &omap3_stalker_vpll2,
.vmmc1 = &omap3stalker_vmmc1,
.vsim = &omap3stalker_vsim,
};
......@@ -474,6 +407,15 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
static int __init omap3_stalker_i2c_init(void)
{
omap3_pmic_get_config(&omap3stalker_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
omap3stalker_twldata.vdac->constraints.apply_uV = true;
omap3stalker_twldata.vpll2->constraints.apply_uV = true;
omap3stalker_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("twl4030", &omap3stalker_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
......@@ -494,10 +436,7 @@ static void __init omap3_stalker_init_early(void)
static void __init omap3_stalker_init_irq(void)
{
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap3_init_irq();
}
static struct platform_device *omap3_stalker_devices[] __initdata = {
......@@ -560,5 +499,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
.init_early = omap3_stalker_init_early,
.init_irq = omap3_stalker_init_irq,
.init_machine = omap3_stalker_init,
.timer = &omap_timer,
.timer = &omap3_secure_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3touchbook.c
浏览文件 @ ae4c42e4
......@@ -51,7 +51,6 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "common-board-devices.h"
#include <asm/setup.h>
......@@ -114,12 +113,12 @@ static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct regulator_consumer_supply touchbook_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply touchbook_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply touchbook_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
static struct gpio_led gpio_leds[];
......@@ -137,10 +136,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
touchbook_vmmc1_supply.dev = mmc[0].dev;
touchbook_vsim_supply.dev = mmc[0].dev;
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
......@@ -167,14 +162,18 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = {
.setup = touchbook_twl_gpio_setup,
};
static struct regulator_consumer_supply touchbook_vdac_supply = {
static struct regulator_consumer_supply touchbook_vdac_supply[] = {
{
.supply = "vdac",
.dev = &omap3_touchbook_lcd_device.dev,
},
};
static struct regulator_consumer_supply touchbook_vdvi_supply = {
static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
{
.supply = "vdvi",
.dev = &omap3_touchbook_lcd_device.dev,
},
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......@@ -188,8 +187,8 @@ static struct regulator_init_data touchbook_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &touchbook_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply),
.consumer_supplies = touchbook_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
......@@ -203,62 +202,15 @@ static struct regulator_init_data touchbook_vsim = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &touchbook_vsim_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data touchbook_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &touchbook_vdac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data touchbook_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &touchbook_vdvi_supply,
};
static struct twl4030_usb_data touchbook_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data touchbook_audio_data;
static struct twl4030_codec_data touchbook_codec_data = {
.audio_mclk = 26000000,
.audio = &touchbook_audio_data,
.num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply),
.consumer_supplies = touchbook_vsim_supply,
};
static struct twl4030_platform_data touchbook_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &touchbook_usb_data,
.gpio = &touchbook_gpio_data,
.codec = &touchbook_codec_data,
.vmmc1 = &touchbook_vmmc1,
.vsim = &touchbook_vsim,
.vdac = &touchbook_vdac,
.vpll2 = &touchbook_vpll2,
};
static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
......@@ -270,8 +222,20 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
static int __init omap3_touchbook_i2c_init(void)
{
/* Standard TouchBook bus */
omap3_pmic_init("twl4030", &touchbook_twldata);
omap3_pmic_get_config(&touchbook_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
touchbook_twldata.vdac->num_consumer_supplies =
ARRAY_SIZE(touchbook_vdac_supply);
touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
touchbook_twldata.vpll2->constraints.name = "VDVI";
touchbook_twldata.vpll2->num_consumer_supplies =
ARRAY_SIZE(touchbook_vdvi_supply);
touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
omap3_pmic_init("twl4030", &touchbook_twldata);
/* Additional TouchBook bus */
omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
ARRAY_SIZE(touchBook_i2c_boardinfo));
......@@ -371,10 +335,7 @@ static void __init omap3_touchbook_init_early(void)
static void __init omap3_touchbook_init_irq(void)
{
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap3_init_irq();
}
static struct platform_device *omap3_touchbook_devices[] __initdata = {
......@@ -449,5 +410,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
.init_early = omap3_touchbook_init_early,
.init_irq = omap3_touchbook_init_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap_timer,
.timer = &omap3_secure_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap4panda.c
浏览文件 @ ae4c42e4
......@@ -41,7 +41,6 @@
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-generic-dpi.h>
#include "timer-gp.h"
#include "hsmmc.h"
#include "control.h"
......@@ -155,14 +154,6 @@ static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
static struct twl4030_usb_data omap4_usbphy_data = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
......@@ -182,24 +173,16 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
{
.supply = "vmmc",
.dev_name = "omap_hsmmc.0",
},
};
static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
.supply = "vmmc",
.dev_name = "omap_hsmmc.4",
static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
};
static struct regulator_init_data panda_vmmc5 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap4_panda_vmmc5_supply,
.num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
.consumer_supplies = omap4_panda_vmmc5_supply,
};
static struct fixed_voltage_config panda_vwlan = {
......@@ -274,128 +257,8 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
return 0;
}
static struct regulator_init_data omap4_panda_vaux2 = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vaux3 = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
/* VMMC1 for MMC1 card */
static struct regulator_init_data omap4_panda_vmmc = {
.constraints = {
.min_uV = 1200000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = omap4_panda_vmmc_supply,
};
static struct regulator_init_data omap4_panda_vpp = {
.constraints = {
.min_uV = 1800000,
.max_uV = 2500000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vana = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vcxio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vusb = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_clk32kg = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static struct twl4030_platform_data omap4_panda_twldata = {
.irq_base = TWL6030_IRQ_BASE,
.irq_end = TWL6030_IRQ_END,
/* Regulators */
.vmmc = &omap4_panda_vmmc,
.vpp = &omap4_panda_vpp,
.vana = &omap4_panda_vana,
.vcxio = &omap4_panda_vcxio,
.vdac = &omap4_panda_vdac,
.vusb = &omap4_panda_vusb,
.vaux2 = &omap4_panda_vaux2,
.vaux3 = &omap4_panda_vaux3,
.clk32kg = &omap4_panda_clk32kg,
.usb = &omap4_usbphy_data,
};
/* Panda board uses the common PMIC configuration */
static struct twl4030_platform_data omap4_panda_twldata;
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
......@@ -409,6 +272,16 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
static int __init omap4_panda_i2c_init(void)
{
omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VDAC |
TWL_COMMON_REGULATOR_VAUX2 |
TWL_COMMON_REGULATOR_VAUX3 |
TWL_COMMON_REGULATOR_VMMC |
TWL_COMMON_REGULATOR_VPP |
TWL_COMMON_REGULATOR_VANA |
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &omap4_panda_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
......@@ -716,5 +589,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
.init_early = omap4_panda_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap_timer,
.timer = &omap4_timer,
MACHINE_END
arch/arm/mach-omap2/board-overo.c
浏览文件 @ ae4c42e4
......@@ -74,15 +74,16 @@
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
/* fixed regulator for ads7846 */
static struct regulator_consumer_supply ads7846_supply =
REGULATOR_SUPPLY("vcc", "spi1.0");
static struct regulator_consumer_supply ads7846_supply[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
};
static struct regulator_init_data vads7846_regulator = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &ads7846_supply,
.num_consumer_supplies = ARRAY_SIZE(ads7846_supply),
.consumer_supplies = ads7846_supply,
};
static struct fixed_voltage_config vads7846 = {
......@@ -264,14 +265,6 @@ static struct omap_dss_board_info overo_dss_data = {
.default_device = &overo_dvi_device,
};
static struct regulator_consumer_supply overo_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
......@@ -319,8 +312,8 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct regulator_consumer_supply overo_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply overo_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
......@@ -415,8 +408,6 @@ static int overo_twl_gpio_setup(struct device *dev,
{
omap2_hsmmc_init(mmc);
overo_vmmc1_supply.dev = mmc[0].dev;
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
......@@ -433,10 +424,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = {
.setup = overo_twl_gpio_setup,
};
static struct twl4030_usb_data overo_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct regulator_init_data overo_vmmc1 = {
.constraints = {
.min_uV = 1850000,
......@@ -447,59 +434,23 @@ static struct regulator_init_data overo_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &overo_vmmc1_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data overo_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &overo_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data overo_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply),
.consumer_supplies = overo_vdds_dsi_supply,
};
static struct twl4030_codec_audio_data overo_audio_data;
static struct twl4030_codec_data overo_codec_data = {
.audio_mclk = 26000000,
.audio = &overo_audio_data,
.num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply),
.consumer_supplies = overo_vmmc1_supply,
};
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
.usb = &overo_usb_data,
.codec = &overo_codec_data,
.vmmc1 = &overo_vmmc1,
.vdac = &overo_vdac,
.vpll2 = &overo_vpll2,
};
static int __init overo_i2c_init(void)
{
omap3_pmic_get_config(&overo_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
overo_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("tps65950", &overo_twldata);
/* i2c2 pins are used for gpio */
omap_register_i2c_bus(3, 400, NULL, 0);
......@@ -615,7 +566,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = overo_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = overo_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-rm680.c
浏览文件 @ ae4c42e4
......@@ -79,20 +79,14 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = {
.pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
};
static struct twl4030_usb_data rm680_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_platform_data rm680_twl_data = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &rm680_gpio_data,
.usb = &rm680_usb_data,
/* add rest of the children here */
};
static void __init rm680_i2c_init(void)
{
omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
......@@ -163,7 +157,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.reserve = omap_reserve,
.map_io = rm680_map_io,
.init_early = rm680_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = rm680_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-rx51-peripherals.c
浏览文件 @ ae4c42e4
......@@ -288,10 +288,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
.rep = 1,
};
static struct twl4030_madc_platform_data rx51_madc_data = {
.irq_line = 1,
};
/* Enable input logic and pull all lines up when eMMC is on. */
static struct omap_board_mux rx51_mmc2_on_mux[] = {
OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
......@@ -358,14 +354,17 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{} /* Terminator */
};
static struct regulator_consumer_supply rx51_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply rx51_vaux3_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
static struct regulator_consumer_supply rx51_vaux3_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static struct regulator_consumer_supply rx51_vsim_supply =
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
static struct regulator_consumer_supply rx51_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
};
static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
/* tlv320aic3x analog supplies */
......@@ -395,10 +394,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
REGULATOR_SUPPLY("vdd", "2-0063"),
};
static struct regulator_consumer_supply rx51_vdac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
static struct regulator_init_data rx51_vaux1 = {
.constraints = {
.name = "V28",
......@@ -452,8 +447,8 @@ static struct regulator_init_data rx51_vaux3_mmc = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &rx51_vaux3_supply,
.num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply),
.consumer_supplies = rx51_vaux3_supply,
};
static struct regulator_init_data rx51_vaux4 = {
......@@ -479,8 +474,8 @@ static struct regulator_init_data rx51_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &rx51_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply),
.consumer_supplies = rx51_vmmc1_supply,
};
static struct regulator_init_data rx51_vmmc2 = {
......@@ -511,23 +506,8 @@ static struct regulator_init_data rx51_vsim = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &rx51_vsim_supply,
};
static struct regulator_init_data rx51_vdac = {
.constraints = {
.name = "VDAC",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = rx51_vdac_supply,
.num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply),
.consumer_supplies = rx51_vsim_supply,
};
static struct regulator_init_data rx51_vio = {
......@@ -600,10 +580,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
.setup = rx51_twlgpio_setup,
};
static struct twl4030_usb_data rx51_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_ins sleep_on_seq[] __initdata = {
/*
* Turn off everything
......@@ -775,14 +751,9 @@ struct twl4030_codec_data rx51_codec_data __initdata = {
};
static struct twl4030_platform_data rx51_twldata __initdata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
.madc = &rx51_madc_data,
.usb = &rx51_usb_data,
.power = &rx51_t2scripts_data,
.codec = &rx51_codec_data,
......@@ -791,7 +762,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
.vsim = &rx51_vsim,
.vdac = &rx51_vdac,
.vio = &rx51_vio,
};
......@@ -847,6 +817,13 @@ static int __init rx51_i2c_init(void)
rx51_twldata.vaux3 = &rx51_vaux3_cam;
}
rx51_twldata.vmmc2 = &rx51_vmmc2;
omap3_pmic_get_config(&rx51_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
TWL_COMMON_REGULATOR_VDAC);
rx51_twldata.vdac->constraints.apply_uV = true;
rx51_twldata.vdac->constraints.name = "VDAC";
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
......
arch/arm/mach-omap2/board-rx51.c
浏览文件 @ ae4c42e4
......@@ -160,7 +160,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
.reserve = rx51_reserve,
.map_io = rx51_map_io,
.init_early = rx51_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = rx51_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-ti8168evm.c
浏览文件 @ ae4c42e4
......@@ -33,11 +33,6 @@ static void __init ti8168_init_early(void)
omap2_init_common_devices(NULL, NULL);
}
static void __init ti8168_evm_init_irq(void)
{
omap_init_irq();
}
static void __init ti8168_evm_init(void)
{
omap_serial_init();
......@@ -56,7 +51,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
.boot_params = 0x80000100,
.map_io = ti8168_evm_map_io,
.init_early = ti8168_init_early,
.init_irq = ti8168_evm_init_irq,
.timer = &omap_timer,
.init_irq = ti816x_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
MACHINE_END
arch/arm/mach-omap2/board-zoom.c
浏览文件 @ ae4c42e4
......@@ -137,9 +137,9 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_zoom_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
......@@ -147,7 +147,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_zoom_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/clock44xx.h
浏览文件 @ ae4c42e4
......@@ -8,13 +8,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
/*
* XXX Missing values for the OMAP4 DPLL_USB
* XXX Missing min_multiplier values for all OMAP4 DPLLs
*/
#define OMAP4430_MAX_DPLL_MULT 2047
#define OMAP4430_MAX_DPLL_DIV 128
int omap4xxx_clk_init(void);
#endif
arch/arm/mach-omap2/cm1_44xx.h
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/cm2_44xx.h
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/common-board-devices.c
浏览文件 @ ae4c42e4
......@@ -20,36 +20,15 @@
*
*/
#include <linux/i2c.h>
#include <linux/i2c/twl.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <plat/i2c.h>
#include <plat/mcspi.h>
#include <plat/nand.h>
#include "common-board-devices.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
.flags = I2C_CLIENT_WAKE,
};
void __init omap_pmic_init(int bus, u32 clkrate,
const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data)
{
strncpy(pmic_i2c_board_info.type, pmic_type,
sizeof(pmic_i2c_board_info.type));
pmic_i2c_board_info.irq = pmic_irq;
pmic_i2c_board_info.platform_data = pmic_data;
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
......@@ -115,9 +94,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
#endif
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
static struct omap_nand_platform_data nand_data = {
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
};
static struct omap_nand_platform_data nand_data;
void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
int nr_parts)
......@@ -148,7 +125,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
nand_data.cs = nandcs;
nand_data.parts = parts;
nand_data.nr_parts = nr_parts;
nand_data.options = options;
nand_data.devsize = options;
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
if (gpmc_nand_init(&nand_data) < 0)
......
arch/arm/mach-omap2/gpmc-nand.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/io.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/irq.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/omap4-common.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/omap_hwmod.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/pm-debug.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/pm.h
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/pm24xx.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/pm34xx.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/prcm_mpu44xx.h
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/prm44xx.h
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/smartreflex.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/timer-gp.h 已删除 100644 → 0
浏览文件 @ dd58ecba
此差异已折叠。
arch/arm/mach-omap2/twl-common.c 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-omap2/twl-common.h 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-pxa/cm-x300.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-pxa/hx4700.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-pxa/magician.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-pxa/mioa701.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-pxa/saarb.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s3c2412/clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s3c2416/clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s3c2440/clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s3c2443/clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s3c64xx/Kconfig
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s3c64xx/clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s3c64xx/include/mach/clkdev.h 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s3c64xx/include/mach/regs-fb.h 已删除 100644 → 0
浏览文件 @ dd58ecba
此差异已折叠。
arch/arm/mach-s3c64xx/mach-hmt.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s3c64xx/mach-ncp.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s5p64x0/Kconfig
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s5p64x0/include/mach/clkdev.h 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s5pc100/Kconfig
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s5pc100/clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s5pc100/include/mach/clkdev.h 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s5pc100/include/mach/regs-fb.h 已删除 100644 → 0
浏览文件 @ dd58ecba
此差异已折叠。
arch/arm/mach-s5pv210/Kconfig
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s5pv210/clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s5pv210/include/mach/clkdev.h 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s5pv210/include/mach/regs-fb.h 已删除 100644 → 0
浏览文件 @ dd58ecba
此差异已折叠。
arch/arm/mach-s5pv210/mach-aquila.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/mach-s5pv210/mach-goni.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-mxc/avic.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-mxc/include/mach/iomux.h 已删除 100644 → 0
浏览文件 @ dd58ecba
此差异已折叠。
arch/arm/plat-mxc/pwm.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-mxc/tzic.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-omap/Kconfig
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-omap/counter_32k.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-omap/dmtimer.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-omap/mcbsp.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-omap/omap_device.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-s3c24xx/clock-dclk.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-s3c24xx/devs.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-s3c24xx/include/mach/clkdev.h 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-s5p/clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-s5p/s5p-time.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/Kconfig
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/Makefile
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-backlight.c 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-fb.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-hwmon.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-i2c0.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-i2c1.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-i2c2.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-i2c3.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-i2c4.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-i2c5.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-i2c6.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-i2c7.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-nand.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-ts.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/dev-usb.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/include/plat/backlight.h 0 → 100644
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/pwm-clock.c
浏览文件 @ ae4c42e4
此差异已折叠。
arch/arm/plat-samsung/time.c
浏览文件 @ ae4c42e4
此差异已折叠。
drivers/pcmcia/pxa2xx_sharpsl.c
浏览文件 @ ae4c42e4
此差异已折叠。
drivers/pcmcia/pxa2xx_trizeps4.c
浏览文件 @ ae4c42e4
此差异已折叠。
drivers/tty/serial/s3c2410.c
浏览文件 @ ae4c42e4
此差异已折叠。
drivers/tty/serial/s3c2412.c
浏览文件 @ ae4c42e4
此差异已折叠。
drivers/tty/serial/s3c2440.c
浏览文件 @ ae4c42e4
此差异已折叠。
drivers/tty/serial/s3c6400.c
浏览文件 @ ae4c42e4
此差异已折叠。
drivers/tty/serial/s5pv210.c
浏览文件 @ ae4c42e4
此差异已折叠。
drivers/tty/serial/samsung.c
浏览文件 @ ae4c42e4
此差异已折叠。
drivers/tty/serial/samsung.h
浏览文件 @ ae4c42e4
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或