pdc202xx_new: move PIO programming code to pdcnew_set_pio_mode()

* Move PIO programming code from pdcnew_set_mode() to pdcnew_set_pio_mode().

* Rename pdcnew_set_mode() to pdcnew_set_dma_mode().

There should be no functionality changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 3071a9d0
...@@ -146,7 +146,7 @@ static struct udma_timing { ...@@ -146,7 +146,7 @@ static struct udma_timing {
{ 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
}; };
static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed) static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
{ {
ide_hwif_t *hwif = HWIF(drive); ide_hwif_t *hwif = HWIF(drive);
u8 adj = (drive->dn & 1) ? 0x08 : 0x00; u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
...@@ -177,7 +177,6 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed) ...@@ -177,7 +177,6 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
set_indexed_reg(hwif, 0x12 + adj, set_indexed_reg(hwif, 0x12 + adj,
udma_timings[mode].reg12); udma_timings[mode].reg12);
break; break;
case XFER_MW_DMA_2: case XFER_MW_DMA_2:
case XFER_MW_DMA_1: case XFER_MW_DMA_1:
case XFER_MW_DMA_0: case XFER_MW_DMA_0:
...@@ -186,18 +185,6 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed) ...@@ -186,18 +185,6 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
set_indexed_reg(hwif, 0x0f + adj, set_indexed_reg(hwif, 0x0f + adj,
mwdma_timings[mode].reg0f); mwdma_timings[mode].reg0f);
break; break;
case XFER_PIO_4:
case XFER_PIO_3:
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
set_indexed_reg(hwif, 0x0c + adj,
pio_timings[mode].reg0c);
set_indexed_reg(hwif, 0x0d + adj,
pio_timings[mode].reg0d);
set_indexed_reg(hwif, 0x13 + adj,
pio_timings[mode].reg13);
break;
default: default:
printk(KERN_ERR "pdc202xx_new: " printk(KERN_ERR "pdc202xx_new: "
"Unknown speed %d ignored\n", speed); "Unknown speed %d ignored\n", speed);
...@@ -212,7 +199,14 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed) ...@@ -212,7 +199,14 @@ static void pdcnew_set_mode(ide_drive_t *drive, const u8 speed)
static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
{ {
pdcnew_set_mode(drive, XFER_PIO_0 + pio); ide_hwif_t *hwif = drive->hwif;
u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
if (max_dma_rate(hwif->pci_dev) == 4) {
set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d);
set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13);
}
} }
static u8 pdcnew_cable_detect(ide_hwif_t *hwif) static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
...@@ -466,7 +460,7 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha ...@@ -466,7 +460,7 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif)
{ {
hwif->set_pio_mode = &pdcnew_set_pio_mode; hwif->set_pio_mode = &pdcnew_set_pio_mode;
hwif->set_dma_mode = &pdcnew_set_mode; hwif->set_dma_mode = &pdcnew_set_dma_mode;
hwif->quirkproc = &pdcnew_quirkproc; hwif->quirkproc = &pdcnew_quirkproc;
hwif->resetproc = &pdcnew_reset; hwif->resetproc = &pdcnew_reset;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册