提交 aba0d348 编写于 作者: J Jan Engelhardt 提交者: Patrick McHardy

netfilter: xtables: sort extensions alphabetically in Kconfig

Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
上级 20f3c56f
......@@ -62,15 +62,16 @@ config IP_NF_IPTABLES
To compile it as a module, choose M here. If unsure, say N.
# The matches.
config IP_NF_MATCH_ECN
tristate '"ecn" match support'
config IP_NF_MATCH_ADDRTYPE
tristate '"addrtype" address type match support'
depends on IP_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
This option adds a `ECN' match, which allows you to match against
the IPv4 and TCP header ECN fields.
This option allows you to match what routing thinks of an address,
eg. UNICAST, LOCAL, BROADCAST, ...
To compile it as a module, choose M here. If unsure, say N.
If you want to compile it as a module, say M here and read
<file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
config IP_NF_MATCH_AH
tristate '"ah" match support'
......@@ -82,26 +83,25 @@ config IP_NF_MATCH_AH
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_TTL
tristate '"ttl" match support'
config IP_NF_MATCH_ECN
tristate '"ecn" match support'
depends on IP_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
to match packets by their TTL value.
This option adds a `ECN' match, which allows you to match against
the IPv4 and TCP header ECN fields.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_MATCH_ADDRTYPE
tristate '"addrtype" address type match support'
config IP_NF_MATCH_TTL
tristate '"ttl" match support'
depends on IP_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
This option allows you to match what routing thinks of an address,
eg. UNICAST, LOCAL, BROADCAST, ...
This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user
to match packets by their TTL value.
If you want to compile it as a module, say M here and read
<file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
To compile it as a module, choose M here. If unsure, say N.
# `filter', generic and specific targets
config IP_NF_FILTER
......@@ -186,26 +186,26 @@ config IP_NF_TARGET_MASQUERADE
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_REDIRECT
tristate "REDIRECT target support"
config IP_NF_TARGET_NETMAP
tristate "NETMAP target support"
depends on NF_NAT
depends on NETFILTER_ADVANCED
help
REDIRECT is a special case of NAT: all incoming connections are
mapped onto the incoming interface's address, causing the packets to
come to the local machine instead of passing through. This is
useful for transparent proxies.
NETMAP is an implementation of static 1:1 NAT mapping of network
addresses. It maps the network address part, while keeping the host
address part intact.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_NETMAP
tristate "NETMAP target support"
config IP_NF_TARGET_REDIRECT
tristate "REDIRECT target support"
depends on NF_NAT
depends on NETFILTER_ADVANCED
help
NETMAP is an implementation of static 1:1 NAT mapping of network
addresses. It maps the network address part, while keeping the host
address part intact.
REDIRECT is a special case of NAT: all incoming connections are
mapped onto the incoming interface's address, causing the packets to
come to the local machine instead of passing through. This is
useful for transparent proxies.
To compile it as a module, choose M here. If unsure, say N.
......@@ -300,6 +300,19 @@ config IP_NF_MANGLE
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_CLUSTERIP
tristate "CLUSTERIP target support (EXPERIMENTAL)"
depends on IP_NF_MANGLE && EXPERIMENTAL
depends on NF_CONNTRACK_IPV4
depends on NETFILTER_ADVANCED
select NF_CONNTRACK_MARK
help
The CLUSTERIP target allows you to build load-balancing clusters of
network servers without having a dedicated load-balancing
router/server/switch.
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_ECN
tristate "ECN target support"
depends on IP_NF_MANGLE
......@@ -330,19 +343,6 @@ config IP_NF_TARGET_TTL
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_CLUSTERIP
tristate "CLUSTERIP target support (EXPERIMENTAL)"
depends on IP_NF_MANGLE && EXPERIMENTAL
depends on NF_CONNTRACK_IPV4
depends on NETFILTER_ADVANCED
select NF_CONNTRACK_MARK
help
The CLUSTERIP target allows you to build load-balancing clusters of
network servers without having a dedicated load-balancing
router/server/switch.
To compile it as a module, choose M here. If unsure, say N.
# raw + specific targets
config IP_NF_RAW
tristate 'raw table support (required for NOTRACK/TRACE)'
......
......@@ -56,23 +56,23 @@ config IP6_NF_IPTABLES
To compile it as a module, choose M here. If unsure, say N.
# The simple matches.
config IP6_NF_MATCH_RT
tristate '"rt" Routing header match support'
config IP6_NF_MATCH_AH
tristate '"ah" match support'
depends on IP6_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
rt matching allows you to match packets based on the routing
header of the packet.
This module allows one to match AH packets.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_OPTS
tristate '"hbh" hop-by-hop and "dst" opts header match support'
config IP6_NF_MATCH_EUI64
tristate '"eui64" address check'
depends on IP6_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
This allows one to match packets based on the hop-by-hop
and destination options headers of a packet.
This module performs checking on the IPv6 source address
Compares the last 64 bits with the EUI64 (delivered
from the MAC address) address
To compile it as a module, choose M here. If unsure, say N.
......@@ -86,6 +86,16 @@ config IP6_NF_MATCH_FRAG
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_OPTS
tristate '"hbh" hop-by-hop and "dst" opts header match support'
depends on IP6_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
This allows one to match packets based on the hop-by-hop
and destination options headers of a packet.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_HL
tristate '"hl" match support'
depends on IP6_NF_IPTABLES
......@@ -106,15 +116,6 @@ config IP6_NF_MATCH_IPV6HEADER
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_AH
tristate '"ah" match support'
depends on IP6_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
This module allows one to match AH packets.
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_MH
tristate '"mh" match support'
depends on IP6_NF_IPTABLES
......@@ -124,14 +125,13 @@ config IP6_NF_MATCH_MH
To compile it as a module, choose M here. If unsure, say N.
config IP6_NF_MATCH_EUI64
tristate '"eui64" address check'
config IP6_NF_MATCH_RT
tristate '"rt" Routing header match support'
depends on IP6_NF_IPTABLES
depends on NETFILTER_ADVANCED
help
This module performs checking on the IPv6 source address
Compares the last 64 bits with the EUI64 (delivered
from the MAC address) address
rt matching allows you to match packets based on the routing
header of the packet.
To compile it as a module, choose M here. If unsure, say N.
......
......@@ -340,6 +340,18 @@ config NETFILTER_XT_TARGET_CONNMARK
<file:Documentation/kbuild/modules.txt>. The module will be called
ipt_CONNMARK.ko. If unsure, say `N'.
config NETFILTER_XT_TARGET_CONNSECMARK
tristate '"CONNSECMARK" target support'
depends on NETFILTER_XTABLES && NF_CONNTRACK && NF_CONNTRACK_SECMARK
default m if NETFILTER_ADVANCED=n
help
The CONNSECMARK target copies security markings from packets
to connections, and restores security markings from connections
to packets (if the packets are not already marked). This would
normally be used in conjunction with the SECMARK target.
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_TARGET_DSCP
tristate '"DSCP" and "TOS" target support'
depends on NETFILTER_XTABLES
......@@ -371,18 +383,6 @@ config NETFILTER_XT_TARGET_MARK
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_TARGET_NFQUEUE
tristate '"NFQUEUE" target Support'
depends on NETFILTER_XTABLES
depends on NETFILTER_ADVANCED
help
This target replaced the old obsolete QUEUE target.
As opposed to QUEUE, it supports 65535 different queues,
not just one.
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_TARGET_NFLOG
tristate '"NFLOG" target support'
depends on NETFILTER_XTABLES
......@@ -395,6 +395,18 @@ config NETFILTER_XT_TARGET_NFLOG
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_TARGET_NFQUEUE
tristate '"NFQUEUE" target Support'
depends on NETFILTER_XTABLES
depends on NETFILTER_ADVANCED
help
This target replaced the old obsolete QUEUE target.
As opposed to QUEUE, it supports 65535 different queues,
not just one.
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_TARGET_NOTRACK
tristate '"NOTRACK" target support'
depends on NETFILTER_XTABLES
......@@ -459,18 +471,6 @@ config NETFILTER_XT_TARGET_SECMARK
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_TARGET_CONNSECMARK
tristate '"CONNSECMARK" target support'
depends on NETFILTER_XTABLES && NF_CONNTRACK && NF_CONNTRACK_SECMARK
default m if NETFILTER_ADVANCED=n
help
The CONNSECMARK target copies security markings from packets
to connections, and restores security markings from connections
to packets (if the packets are not already marked). This would
normally be used in conjunction with the SECMARK target.
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_TARGET_TCPMSS
tristate '"TCPMSS" target support'
depends on NETFILTER_XTABLES && (IPV6 || IPV6=n)
......@@ -607,6 +607,21 @@ config NETFILTER_XT_MATCH_ESP
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_MATCH_HASHLIMIT
tristate '"hashlimit" match support'
depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n)
depends on NETFILTER_ADVANCED
help
This option adds a `hashlimit' match.
As opposed to `limit', this match dynamically creates a hash table
of limit buckets, based on your selection of source/destination
addresses and/or ports.
It enables you to express policies like `10kpps for any given
destination address' or `500pps from any given source address'
with a single rule.
config NETFILTER_XT_MATCH_HELPER
tristate '"helper" match support'
depends on NETFILTER_XTABLES
......@@ -671,6 +686,17 @@ config NETFILTER_XT_MATCH_MARK
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_MATCH_MULTIPORT
tristate '"multiport" Multiple port match support'
depends on NETFILTER_XTABLES
depends on NETFILTER_ADVANCED
help
Multiport matching allows you to match TCP or UDP packets based on
a series of source or destination ports: normally a rule can only
match a single range of ports.
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_MATCH_OWNER
tristate '"owner" match support'
depends on NETFILTER_XTABLES
......@@ -691,17 +717,6 @@ config NETFILTER_XT_MATCH_POLICY
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_MATCH_MULTIPORT
tristate '"multiport" Multiple port match support'
depends on NETFILTER_XTABLES
depends on NETFILTER_ADVANCED
help
Multiport matching allows you to match TCP or UDP packets based on
a series of source or destination ports: normally a rule can only
match a single range of ports.
To compile it as a module, choose M here. If unsure, say N.
config NETFILTER_XT_MATCH_PHYSDEV
tristate '"physdev" match support'
depends on NETFILTER_XTABLES && BRIDGE && BRIDGE_NETFILTER
......@@ -884,20 +899,5 @@ config NETFILTER_XT_MATCH_U32
Details and examples are in the kernel module source.
config NETFILTER_XT_MATCH_HASHLIMIT
tristate '"hashlimit" match support'
depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n)
depends on NETFILTER_ADVANCED
help
This option adds a `hashlimit' match.
As opposed to `limit', this match dynamically creates a hash table
of limit buckets, based on your selection of source/destination
addresses and/or ports.
It enables you to express policies like `10kpps for any given
destination address' or `500pps from any given source address'
with a single rule.
endmenu
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册