提交 ab9d7c30 编写于 作者: P Paulo Zanoni 提交者: Daniel Vetter

drm/i915: add port field to struct intel_dp and use it

This will be needed for Haswell, but already has its uses here.

This patch started as a small patch written patch by Shobhit Kumar,
but it has changed so much that none of its original lines remain.

Credits-to: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 47ea7542
......@@ -6764,10 +6764,10 @@ static void intel_setup_outputs(struct drm_device *dev)
dpd_is_edp = intel_dpd_is_edp(dev);
if (has_edp_a(dev))
intel_dp_init(dev, DP_A);
intel_dp_init(dev, DP_A, PORT_A);
if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
intel_dp_init(dev, PCH_DP_D);
intel_dp_init(dev, PCH_DP_D, PORT_D);
}
intel_crt_init(dev);
......@@ -6800,7 +6800,7 @@ static void intel_setup_outputs(struct drm_device *dev)
if (!found)
intel_hdmi_init(dev, HDMIB, PORT_B);
if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
intel_dp_init(dev, PCH_DP_B);
intel_dp_init(dev, PCH_DP_B, PORT_B);
}
if (I915_READ(HDMIC) & PORT_DETECTED)
......@@ -6810,10 +6810,10 @@ static void intel_setup_outputs(struct drm_device *dev)
intel_hdmi_init(dev, HDMID, PORT_D);
if (I915_READ(PCH_DP_C) & DP_DETECTED)
intel_dp_init(dev, PCH_DP_C);
intel_dp_init(dev, PCH_DP_C, PORT_C);
if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
intel_dp_init(dev, PCH_DP_D);
intel_dp_init(dev, PCH_DP_D, PORT_D);
} else if (IS_VALLEYVIEW(dev)) {
int found;
......@@ -6823,7 +6823,7 @@ static void intel_setup_outputs(struct drm_device *dev)
if (!found)
intel_hdmi_init(dev, SDVOB, PORT_B);
if (!found && (I915_READ(DP_B) & DP_DETECTED))
intel_dp_init(dev, DP_B);
intel_dp_init(dev, DP_B, PORT_B);
}
if (I915_READ(SDVOC) & PORT_DETECTED)
......@@ -6831,7 +6831,7 @@ static void intel_setup_outputs(struct drm_device *dev)
/* Shares lanes with HDMI on SDVOC */
if (I915_READ(DP_C) & DP_DETECTED)
intel_dp_init(dev, DP_C);
intel_dp_init(dev, DP_C, PORT_C);
} else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) {
bool found = false;
......@@ -6845,7 +6845,7 @@ static void intel_setup_outputs(struct drm_device *dev)
if (!found && SUPPORTS_INTEGRATED_DP(dev)) {
DRM_DEBUG_KMS("probing DP_B\n");
intel_dp_init(dev, DP_B);
intel_dp_init(dev, DP_B, PORT_B);
}
}
......@@ -6864,14 +6864,14 @@ static void intel_setup_outputs(struct drm_device *dev)
}
if (SUPPORTS_INTEGRATED_DP(dev)) {
DRM_DEBUG_KMS("probing DP_C\n");
intel_dp_init(dev, DP_C);
intel_dp_init(dev, DP_C, PORT_C);
}
}
if (SUPPORTS_INTEGRATED_DP(dev) &&
(I915_READ(DP_D) & DP_DETECTED)) {
DRM_DEBUG_KMS("probing DP_D\n");
intel_dp_init(dev, DP_D);
intel_dp_init(dev, DP_D, PORT_D);
}
} else if (IS_GEN2(dev))
intel_dvo_init(dev);
......
......@@ -2426,7 +2426,7 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
}
void
intel_dp_init(struct drm_device *dev, int output_reg)
intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_connector *connector;
......@@ -2441,6 +2441,7 @@ intel_dp_init(struct drm_device *dev, int output_reg)
return;
intel_dp->output_reg = output_reg;
intel_dp->port = port;
intel_dp->dpms_mode = -1;
intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
......@@ -2486,28 +2487,25 @@ intel_dp_init(struct drm_device *dev, int output_reg)
drm_sysfs_connector_add(connector);
/* Set up the DDC bus. */
switch (output_reg) {
case DP_A:
name = "DPDDC-A";
break;
case DP_B:
case PCH_DP_B:
dev_priv->hotplug_supported_mask |=
DPB_HOTPLUG_INT_STATUS;
name = "DPDDC-B";
break;
case DP_C:
case PCH_DP_C:
dev_priv->hotplug_supported_mask |=
DPC_HOTPLUG_INT_STATUS;
name = "DPDDC-C";
break;
case DP_D:
case PCH_DP_D:
dev_priv->hotplug_supported_mask |=
DPD_HOTPLUG_INT_STATUS;
name = "DPDDC-D";
break;
switch (port) {
case PORT_A:
name = "DPDDC-A";
break;
case PORT_B:
dev_priv->hotplug_supported_mask |= DPB_HOTPLUG_INT_STATUS;
name = "DPDDC-B";
break;
case PORT_C:
dev_priv->hotplug_supported_mask |= DPC_HOTPLUG_INT_STATUS;
name = "DPDDC-C";
break;
case PORT_D:
dev_priv->hotplug_supported_mask |= DPD_HOTPLUG_INT_STATUS;
name = "DPDDC-D";
break;
default:
WARN(1, "Invalid port %c\n", port_name(port));
break;
}
intel_dp_i2c_init(intel_dp, intel_connector, name);
......
......@@ -306,6 +306,7 @@ struct intel_dp {
uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE];
bool has_audio;
enum hdmi_force_audio force_audio;
enum port port;
uint32_t color_range;
int dpms_mode;
uint8_t link_bw;
......@@ -375,7 +376,8 @@ extern void intel_tv_init(struct drm_device *dev);
extern void intel_mark_busy(struct drm_device *dev,
struct drm_i915_gem_object *obj);
extern bool intel_lvds_init(struct drm_device *dev);
extern void intel_dp_init(struct drm_device *dev, int dp_reg);
extern void intel_dp_init(struct drm_device *dev, int output_reg,
enum port port);
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册