Automated merge of kernel.org:/home/rmk/linux-2.6-rmk.git

arch/arm/mach-pxa/sleep.S

@@ -18,6 +18,11 @@
 
 #include <asm/arch/pxa-regs.h>
 
+#ifdef CONFIG_PXA27x			// workaround for Errata 50
+#define MDREFR_KDIV	0x200a4000	// all banks
+#define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
+#endif
+
 		.text
 
 /*
@@ -28,7 +33,9 @@
 
 ENTRY(pxa_cpu_suspend)
 
+#ifndef CONFIG_IWMMXT
 	mra	r2, r3, acc0
+#endif
 	stmfd	sp!, {r2 - r12, lr}		@ save registers on stack
 
 	@ get coprocessor registers
@@ -61,14 +68,23 @@ ENTRY(pxa_cpu_suspend)
 	@ prepare value for sleep mode
 	mov	r1, #3				@ sleep mode
 
-	@ prepare to put SDRAM into self-refresh manually
+	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
+	mov	r2, #UNCACHED_PHYS_0
+
+	@ prepare SDRAM refresh settings
 	ldr	r4, =MDREFR
 	ldr	r5, [r4]
+
+	@ enable SDRAM self-refresh mode
 	orr	r5, r5, #MDREFR_SLFRSH
 
-	@ prepare pointer to physical address 0 (virtual mapping in generic.c)
-	mov	r2, #UNCACHED_PHYS_0
+#ifdef CONFIG_PXA27x
+	@ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
+	ldr	r6, =MDREFR_KDIV
+	orr	r5, r5, r6
+#endif
 
+#ifdef CONFIG_PXA25x
 	@ Intel PXA255 Specification Update notes problems
 	@ about suspending with PXBus operating above 133MHz
 	@ (see Errata 31, GPIO output signals, ... unpredictable in sleep
@@ -100,6 +116,18 @@ ENTRY(pxa_cpu_suspend)
 	mov	r0, #0
 	mcr	p14, 0, r0, c6, c0, 0
 	orr	r0, r0, #2			@ initiate change bit
+#endif
+#ifdef CONFIG_PXA27x
+	@ Intel PXA270 Specification Update notes problems sleeping
+	@ with core operating above 91 MHz
+	@ (see Errata 50, ...processor does not exit from sleep...)
+
+	ldr	r6, =CCCR
+	ldr	r8, [r6]		@ keep original value for resume
+
+	ldr	r7, =CCCR_SLEEP		@ prepare CCCR sleep value
+	mov	r0, #0x2		@ prepare value for CLKCFG
+#endif
 
 	@ align execution to a cache line
 	b	1f
@@ -111,6 +139,7 @@ ENTRY(pxa_cpu_suspend)
 	@ All needed values are now in registers.
 	@ These last instructions should be in cache
 
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
 	@ initiate the frequency change...
 	str	r7, [r6]
 	mcr	p14, 0, r0, c6, c0, 0
@@ -118,14 +147,27 @@ ENTRY(pxa_cpu_suspend)
 	@ restore the original cpu speed value for resume
 	str	r8, [r6]
 
-	@ put SDRAM into self-refresh
-	str	r5, [r4]
+	@ need 6 13-MHz cycles before changing PWRMODE
+	@ just set frequency to 91-MHz... 6*91/13 = 42
+
+	mov	r0, #42
+10:	subs	r0, r0, #1
+	bne	10b
+#endif
+
+	@ Do not reorder...
+	@ Intel PXA270 Specification Update notes problems performing
+	@ external accesses after SDRAM is put in self-refresh mode
+	@ (see Errata 39 ...hangs when entering self-refresh mode)
 
 	@ force address lines low by reading at physical address 0
 	ldr	r3, [r2]
 
+	@ put SDRAM into self-refresh
+	str	r5, [r4]
+
 	@ enter sleep mode
-	mcr	p14, 0, r1, c7, c0, 0
+	mcr	p14, 0, r1, c7, c0, 0		@ PWRMODE
 
 20:	b	20b				@ loop waiting for sleep
 
@@ -188,7 +230,9 @@ resume_after_mmu:
 	bl	cpu_xscale_proc_init
 #endif
 	ldmfd	sp!, {r2, r3}
+#ifndef CONFIG_IWMMXT
 	mar	acc0, r2, r3
+#endif
 	ldmfd	sp!, {r4 - r12, pc}		@ return to caller
 
 

include/asm-arm/arch-s3c2410/regs-iis.h

@@ -14,6 +14,7 @@
  *    26-06-2003     BJD     Finished off definitions for register addresses
  *    12-03-2004     BJD     Updated include protection
  *    07-03-2005     BJD     Added FIFO size flags and S3C2440 MPLL
+ *    05-04-2005     LCVR    Added IISFCON definitions for the S3C2400
  */
 
 #ifndef __ASM_ARCH_REGS_IIS_H
@@ -68,5 +69,14 @@
 #define S3C2410_IISFCON_RXMASK	  (0x3f)
 #define S3C2410_IISFCON_RXSHIFT	  (0)
 
+#define S3C2400_IISFCON_TXDMA     (1<<11)
+#define S3C2400_IISFCON_RXDMA     (1<<10)
+#define S3C2400_IISFCON_TXENABLE  (1<<9)
+#define S3C2400_IISFCON_RXENABLE  (1<<8)
+#define S3C2400_IISFCON_TXMASK	  (0x07 << 4)
+#define S3C2400_IISFCON_TXSHIFT	  (4)
+#define S3C2400_IISFCON_RXMASK	  (0x07)
+#define S3C2400_IISFCON_RXSHIFT	  (0)
+
 #define S3C2410_IISFIFO  (0x10)
 #endif /* __ASM_ARCH_REGS_IIS_H */

include/asm-arm/arch-s3c2410/regs-mem.h

@@ -12,6 +12,7 @@
  *  Changelog:
  *	29-Sep-2004  BJD  Initial include for Linux
  *      10-Mar-2005  LCVR Changed S3C2410_VA to S3C24XX_VA
+ *      04-Apr-2005  LCVR Added S3C2400 DRAM/BANKSIZE_MASK definitions
  *
 */
 
@@ -183,6 +184,12 @@
 #define S3C2410_REFRESH_TRP_3clk	(1<<20)
 #define S3C2410_REFRESH_TRP_4clk	(2<<20)
 
+#define S3C2400_REFRESH_DRAM_TRP_MASK   (3<<20)
+#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
+#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
+#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
+#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
+
 #define S3C2410_REFRESH_TSRC_MASK	(3<<18)
 #define S3C2410_REFRESH_TSRC_4clk	(0<<18)
 #define S3C2410_REFRESH_TSRC_5clk	(1<<18)
@@ -205,6 +212,7 @@
 #define S3C2410_BANKSIZE_4M		(0x5 << 0)
 #define S3C2410_BANKSIZE_2M		(0x4 << 0)
 #define S3C2410_BANKSIZE_MASK		(0x7 << 0)
+#define S3C2400_BANKSIZE_MASK           (0x4 << 0)
 #define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
 #define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
 #define S3C2410_BANKSIZE_BURST		(1<<7)

include/asm-arm/arch-s3c2410/regs-spi.h

@@ -12,6 +12,7 @@
  *    20-04-2004     KF      Created file
  *    04-10-2004     BJD     Removed VA address (no longer mapped)
  *			     tidied file for submission
+ *    03-04-2005     LCVR    Added S3C2400_SPPIN_nCS definition
  */
 
 #ifndef __ASM_ARCH_REGS_SPI_H
@@ -46,6 +47,7 @@
 
 #define S3C2410_SPPIN_ENMUL	  (1<<2)	/* Multi Master Error detect */
 #define S3C2410_SPPIN_RESERVED	  (1<<1)
+#define S3C2400_SPPIN_nCS     	  (1<<1)	/* SPI Card Select */
 #define S3C2410_SPPIN_KEEP	  (1<<0)	/* Master Out keep */
 
 

include/asm-arm/arch-s3c2410/uncompress.h

@@ -16,6 +16,7 @@
  *  12-Oct-2004 BJD  Take account of debug uart configuration
  *  15-Nov-2004 BJD  Fixed uart configuration
  *  22-Feb-2005 BJD  Added watchdog to uncompress
+ *  04-Apr-2005 LCVR Added support to S3C2400 (no cpuid at GSTATUS1)
 */
 
 #ifndef __ASM_ARCH_UNCOMPRESS_H
@@ -69,9 +70,12 @@ uart_rd(unsigned int reg)
 static void
 putc(char ch)
 {
-	int cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
+	int cpuid = S3C2410_GSTATUS1_2410;
 
+#ifndef CONFIG_CPU_S3C2400
+	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
 	cpuid &= S3C2410_GSTATUS1_IDMASK;
+#endif
 
 	if (ch == '\n')
 		putc('\r');    /* expand newline to \r\n */

include/asm-arm/string.h

@@ -29,15 +29,22 @@ extern void __memzero(void *ptr, __kernel_size_t n);
 
 #define memset(p,v,n)							\
 	({								\
-		if ((n) != 0) {						\
+	 	void *__p = (p); size_t __n = n;			\
+		if ((__n) != 0) {					\
 			if (__builtin_constant_p((v)) && (v) == 0)	\
-				__memzero((p),(n));			\
+				__memzero((__p),(__n));			\
 			else						\
-				memset((p),(v),(n));			\
+				memset((__p),(v),(__n));		\
 		}							\
-		(p);							\
+		(__p);							\
 	})
 
-#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); })
+#define memzero(p,n) 							\
+	({ 								\
+	 	void *__p = (p); size_t __n = n;			\
+	 	if ((__n) != 0) 					\
+	 		__memzero((__p),(__n)); 			\
+	 	(__p); 							\
+	 })
 
 #endif