提交 ab13315a 编写于 作者: K Kalle Valo 提交者: John W. Linville

mac80211: add U-APSD client support

Add Unscheduled Automatic Power-Save Delivery (U-APSD) client support. The
idea is that the data frames from the client trigger AP to send the buffered
frames with ACs which have U-APSD enabled. This decreases latency and makes it
possible to save even more power.

Driver needs to use IEEE80211_HW_UAPSD to enable the feature. The current
implementation assumes that firmware takes care of the wakeup and
hardware needing IEEE80211_HW_PS_NULLFUNC_STACK is not yet supported.

Tested with wl1251 on a Nokia N900 and Cisco Aironet 1231G AP and running
various test traffic with ping.
Signed-off-by: NKalle Valo <kalle.valo@nokia.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 2d46d7c1
......@@ -120,6 +120,24 @@
#define IEEE80211_QOS_CTL_TID_MASK 0x000F
#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007
/* U-APSD queue for WMM IEs sent by AP */
#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7)
/* U-APSD queues for WMM IEs sent by STA */
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO (1<<0)
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_VI (1<<1)
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BK (1<<2)
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_BE (1<<3)
#define IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK 0x0f
/* U-APSD max SP length for WMM IEs sent by STA */
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL 0x00
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_2 0x01
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_4 0x02
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_6 0x03
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK 0x03
#define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT 5
struct ieee80211_hdr {
__le16 frame_control;
__le16 duration_id;
......
......@@ -113,6 +113,7 @@ struct ieee80211_tx_queue_params {
u16 cw_min;
u16 cw_max;
u8 aifs;
bool uapsd;
};
/**
......@@ -929,6 +930,11 @@ enum ieee80211_tkip_key_type {
* Hardware supports dynamic spatial multiplexing powersave,
* ie. can turn off all but one chain and then wake the rest
* up as required after, for example, rts/cts handshake.
*
* @IEEE80211_HW_SUPPORTS_UAPSD:
* Hardware supports Unscheduled Automatic Power Save Delivery
* (U-APSD) in managed mode. The mode is configured with
* conf_tx() operation.
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
......@@ -948,6 +954,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_BEACON_FILTER = 1<<14,
IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15,
IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16,
IEEE80211_HW_SUPPORTS_UAPSD = 1<<17,
};
/**
......
......@@ -1128,6 +1128,13 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy,
p.cw_max = params->cwmax;
p.cw_min = params->cwmin;
p.txop = params->txop;
/*
* Setting tx queue params disables u-apsd because it's only
* called in master mode.
*/
p.uapsd = false;
if (drv_conf_tx(local, params->queue, &p)) {
printk(KERN_DEBUG "%s: failed to set TX queue "
"parameters for queue %d\n",
......
......@@ -58,6 +58,15 @@ struct ieee80211_local;
#define TU_TO_EXP_TIME(x) (jiffies + usecs_to_jiffies((x) * 1024))
#define IEEE80211_DEFAULT_UAPSD_QUEUES \
(IEEE80211_WMM_IE_STA_QOSINFO_AC_BK | \
IEEE80211_WMM_IE_STA_QOSINFO_AC_BE | \
IEEE80211_WMM_IE_STA_QOSINFO_AC_VI | \
IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
#define IEEE80211_DEFAULT_MAX_SP_LEN \
IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL
struct ieee80211_fragment_entry {
unsigned long first_frag_time;
unsigned int seq;
......@@ -78,6 +87,7 @@ struct ieee80211_bss {
u8 dtim_period;
bool wmm_used;
bool uapsd_supported;
unsigned long last_probe_resp;
......@@ -285,7 +295,7 @@ struct ieee80211_work {
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 ssid_len;
u8 supp_rates_len;
bool wmm_used, use_11n;
bool wmm_used, use_11n, uapsd_used;
} assoc;
struct {
u32 duration;
......@@ -306,6 +316,7 @@ enum ieee80211_sta_flags {
IEEE80211_STA_DISABLE_11N = BIT(4),
IEEE80211_STA_CSA_RECEIVED = BIT(5),
IEEE80211_STA_MFP_ENABLED = BIT(6),
IEEE80211_STA_UAPSD_ENABLED = BIT(7),
};
struct ieee80211_if_managed {
......
......@@ -491,6 +491,10 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
WARN((local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)
&& (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK),
"U-APSD not supported with HW_PS_NULLFUNC_STACK\n");
/*
* Calculate scan IE length -- we need this to alloc
* memory and to subtract from the driver limit. It
......
......@@ -569,7 +569,7 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
struct ieee80211_tx_queue_params params;
size_t left;
int count;
u8 *pos;
u8 *pos, uapsd_queues = 0;
if (local->hw.queues < 4)
return;
......@@ -579,6 +579,10 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
return;
if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
count = wmm_param[6] & 0x0f;
if (count == ifmgd->wmm_last_param_set)
return;
......@@ -593,6 +597,7 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
for (; left >= 4; left -= 4, pos += 4) {
int aci = (pos[0] >> 5) & 0x03;
int acm = (pos[0] >> 4) & 0x01;
bool uapsd = false;
int queue;
switch (aci) {
......@@ -600,22 +605,30 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
queue = 3;
if (acm)
local->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
uapsd = true;
break;
case 2: /* AC_VI */
queue = 1;
if (acm)
local->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
uapsd = true;
break;
case 3: /* AC_VO */
queue = 0;
if (acm)
local->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
uapsd = true;
break;
case 0: /* AC_BE */
default:
queue = 2;
if (acm)
local->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
uapsd = true;
break;
}
......@@ -623,11 +636,14 @@ static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
params.cw_min = ecw2cw(pos[1] & 0x0f);
params.txop = get_unaligned_le16(pos + 2);
params.uapsd = uapsd;
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: WMM queue=%d aci=%d acm=%d aifs=%d "
"cWmin=%d cWmax=%d txop=%d\n",
"cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
wiphy_name(local->hw.wiphy), queue, aci, acm,
params.aifs, params.cw_min, params.cw_max, params.txop);
params.aifs, params.cw_min, params.cw_max, params.txop,
params.uapsd);
#endif
if (drv_conf_tx(local, queue, &params) && local->ops->conf_tx)
printk(KERN_DEBUG "%s: failed to set TX queue "
......@@ -1906,6 +1922,15 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
wk->assoc.ht_information_ie =
ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_INFORMATION);
if (bss->wmm_used && bss->uapsd_supported &&
(sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) {
wk->assoc.uapsd_used = true;
ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
} else {
wk->assoc.uapsd_used = false;
ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
}
ssid = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
memcpy(wk->assoc.ssid, ssid + 2, ssid[1]);
wk->assoc.ssid_len = ssid[1];
......
......@@ -54,6 +54,23 @@ void ieee80211_rx_bss_put(struct ieee80211_local *local,
cfg80211_put_bss(container_of((void *)bss, struct cfg80211_bss, priv));
}
static bool is_uapsd_supported(struct ieee802_11_elems *elems)
{
u8 qos_info;
if (elems->wmm_info && elems->wmm_info_len == 7
&& elems->wmm_info[5] == 1)
qos_info = elems->wmm_info[6];
else if (elems->wmm_param && elems->wmm_param_len == 24
&& elems->wmm_param[5] == 1)
qos_info = elems->wmm_param[6];
else
/* no valid wmm information or parameter element found */
return false;
return qos_info & IEEE80211_WMM_IE_AP_QOSINFO_UAPSD;
}
struct ieee80211_bss *
ieee80211_bss_info_update(struct ieee80211_local *local,
struct ieee80211_rx_status *rx_status,
......@@ -117,6 +134,7 @@ ieee80211_bss_info_update(struct ieee80211_local *local,
}
bss->wmm_used = elems->wmm_param || elems->wmm_info;
bss->uapsd_supported = is_uapsd_supported(elems);
if (!beacon)
bss->last_probe_resp = jiffies;
......
......@@ -792,6 +792,8 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata)
break;
}
qparam.uapsd = false;
drv_conf_tx(local, queue, &qparam);
}
}
......
......@@ -202,7 +202,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u8 *pos;
u8 *pos, qos_info;
const u8 *ies;
size_t offset = 0, noffset;
int i, len, count, rates_len, supp_rates_len;
......@@ -375,6 +375,14 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
}
if (wk->assoc.wmm_used && local->hw.queues >= 4) {
if (wk->assoc.uapsd_used) {
qos_info = IEEE80211_DEFAULT_UAPSD_QUEUES;
qos_info |= (IEEE80211_DEFAULT_MAX_SP_LEN <<
IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
} else {
qos_info = 0;
}
pos = skb_put(skb, 9);
*pos++ = WLAN_EID_VENDOR_SPECIFIC;
*pos++ = 7; /* len */
......@@ -384,7 +392,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
*pos++ = 2; /* WME */
*pos++ = 0; /* WME info */
*pos++ = 1; /* WME ver */
*pos++ = 0;
*pos++ = qos_info;
}
/* add any remaining custom (i.e. vendor specific here) IEs */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册