提交 aaa84e6a 编写于 作者: R Richard Fitzgerald 提交者: Mark Brown

regulator: arizona-ldo1: Move pdata into a separate structure

In preparation for sharing this driver with Madera, move the pdata
for the LDO1 regulator out of struct arizona_pdata into a dedicated
pdata struct for this driver. As a result the code in
arizona_ldo1_of_get_pdata() can be made independent of struct arizona.

This patch also updates the definition of struct arizona_pdata and
the use of this pdata in mach-crag6410-module.c
Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 7d8d14b5
...@@ -209,7 +209,9 @@ static const struct i2c_board_info wm1277_devs[] = { ...@@ -209,7 +209,9 @@ static const struct i2c_board_info wm1277_devs[] = {
}; };
static struct arizona_pdata wm5102_reva_pdata = { static struct arizona_pdata wm5102_reva_pdata = {
.ldoena = S3C64XX_GPN(7), .ldo1 = {
.ldoena = S3C64XX_GPN(7),
},
.gpio_base = CODEC_GPIO_BASE, .gpio_base = CODEC_GPIO_BASE,
.irq_flags = IRQF_TRIGGER_HIGH, .irq_flags = IRQF_TRIGGER_HIGH,
.micd_pol_gpio = CODEC_GPIO_BASE + 4, .micd_pol_gpio = CODEC_GPIO_BASE + 4,
...@@ -239,7 +241,9 @@ static struct spi_board_info wm5102_reva_spi_devs[] = { ...@@ -239,7 +241,9 @@ static struct spi_board_info wm5102_reva_spi_devs[] = {
}; };
static struct arizona_pdata wm5102_pdata = { static struct arizona_pdata wm5102_pdata = {
.ldoena = S3C64XX_GPN(7), .ldo1 = {
.ldoena = S3C64XX_GPN(7),
},
.gpio_base = CODEC_GPIO_BASE, .gpio_base = CODEC_GPIO_BASE,
.irq_flags = IRQF_TRIGGER_HIGH, .irq_flags = IRQF_TRIGGER_HIGH,
.micd_pol_gpio = CODEC_GPIO_BASE + 2, .micd_pol_gpio = CODEC_GPIO_BASE + 2,
......
...@@ -25,6 +25,8 @@ ...@@ -25,6 +25,8 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/regulator/arizona-ldo1.h>
#include <linux/mfd/arizona/core.h> #include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h> #include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h> #include <linux/mfd/arizona/registers.h>
...@@ -186,20 +188,19 @@ static const struct regulator_init_data arizona_ldo1_wm5110 = { ...@@ -186,20 +188,19 @@ static const struct regulator_init_data arizona_ldo1_wm5110 = {
.num_consumer_supplies = 1, .num_consumer_supplies = 1,
}; };
static int arizona_ldo1_of_get_pdata(struct device *dev, static int arizona_ldo1_of_get_pdata(struct arizona_ldo1_pdata *pdata,
struct arizona *arizona,
struct regulator_config *config, struct regulator_config *config,
const struct regulator_desc *desc) const struct regulator_desc *desc,
bool *external_dcvdd)
{ {
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_ldo1 *ldo1 = config->driver_data; struct arizona_ldo1 *ldo1 = config->driver_data;
struct device_node *np = arizona->dev->of_node; struct device_node *np = config->dev->of_node;
struct device_node *init_node, *dcvdd_node; struct device_node *init_node, *dcvdd_node;
struct regulator_init_data *init_data; struct regulator_init_data *init_data;
pdata->ldoena = of_get_named_gpio(np, "wlf,ldoena", 0); pdata->ldoena = of_get_named_gpio(np, "wlf,ldoena", 0);
if (pdata->ldoena < 0) { if (pdata->ldoena < 0) {
dev_warn(arizona->dev, dev_warn(config->dev,
"LDOENA GPIO property missing/malformed: %d\n", "LDOENA GPIO property missing/malformed: %d\n",
pdata->ldoena); pdata->ldoena);
pdata->ldoena = 0; pdata->ldoena = 0;
...@@ -213,19 +214,19 @@ static int arizona_ldo1_of_get_pdata(struct device *dev, ...@@ -213,19 +214,19 @@ static int arizona_ldo1_of_get_pdata(struct device *dev,
if (init_node) { if (init_node) {
config->of_node = init_node; config->of_node = init_node;
init_data = of_get_regulator_init_data(dev, init_node, desc); init_data = of_get_regulator_init_data(config->dev, init_node,
desc);
if (init_data) { if (init_data) {
init_data->consumer_supplies = &ldo1->supply; init_data->consumer_supplies = &ldo1->supply;
init_data->num_consumer_supplies = 1; init_data->num_consumer_supplies = 1;
if (dcvdd_node && dcvdd_node != init_node) if (dcvdd_node && dcvdd_node != init_node)
arizona->external_dcvdd = true; *external_dcvdd = true;
pdata->ldo1 = init_data; pdata->init_data = init_data;
} }
} else if (dcvdd_node) { } else if (dcvdd_node) {
arizona->external_dcvdd = true; *external_dcvdd = true;
} }
of_node_put(dcvdd_node); of_node_put(dcvdd_node);
...@@ -239,10 +240,9 @@ static int arizona_ldo1_probe(struct platform_device *pdev) ...@@ -239,10 +240,9 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
const struct regulator_desc *desc; const struct regulator_desc *desc;
struct regulator_config config = { }; struct regulator_config config = { };
struct arizona_ldo1 *ldo1; struct arizona_ldo1 *ldo1;
bool external_dcvdd = false;
int ret; int ret;
arizona->external_dcvdd = false;
ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL); ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
if (!ldo1) if (!ldo1)
return -ENOMEM; return -ENOMEM;
...@@ -283,17 +283,18 @@ static int arizona_ldo1_probe(struct platform_device *pdev) ...@@ -283,17 +283,18 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
if (IS_ENABLED(CONFIG_OF)) { if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(arizona->dev)) { if (!dev_get_platdata(arizona->dev)) {
ret = arizona_ldo1_of_get_pdata(&pdev->dev, arizona, ret = arizona_ldo1_of_get_pdata(&arizona->pdata.ldo1,
&config, desc); &config, desc,
&external_dcvdd);
if (ret < 0) if (ret < 0)
return ret; return ret;
} }
} }
config.ena_gpio = arizona->pdata.ldoena; config.ena_gpio = arizona->pdata.ldo1.ldoena;
if (arizona->pdata.ldo1) if (arizona->pdata.ldo1.init_data)
config.init_data = arizona->pdata.ldo1; config.init_data = arizona->pdata.ldo1.init_data;
else else
config.init_data = &ldo1->init_data; config.init_data = &ldo1->init_data;
...@@ -303,6 +304,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev) ...@@ -303,6 +304,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
*/ */
if (config.init_data->num_consumer_supplies == 0) if (config.init_data->num_consumer_supplies == 0)
arizona->external_dcvdd = true; arizona->external_dcvdd = true;
else
arizona->external_dcvdd = external_dcvdd;
ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config); ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config);
......
...@@ -12,6 +12,7 @@ ...@@ -12,6 +12,7 @@
#define _ARIZONA_PDATA_H #define _ARIZONA_PDATA_H
#include <dt-bindings/mfd/arizona.h> #include <dt-bindings/mfd/arizona.h>
#include <linux/regulator/arizona-ldo1.h>
#include <linux/regulator/arizona-micsupp.h> #include <linux/regulator/arizona-micsupp.h>
#define ARIZONA_GPN_DIR_MASK 0x8000 /* GPN_DIR */ #define ARIZONA_GPN_DIR_MASK 0x8000 /* GPN_DIR */
...@@ -77,13 +78,12 @@ struct arizona_micd_range { ...@@ -77,13 +78,12 @@ struct arizona_micd_range {
struct arizona_pdata { struct arizona_pdata {
int reset; /** GPIO controlling /RESET, if any */ int reset; /** GPIO controlling /RESET, if any */
int ldoena; /** GPIO controlling LODENA, if any */
/** Regulator configuration for MICVDD */ /** Regulator configuration for MICVDD */
struct arizona_micsupp_pdata micvdd; struct arizona_micsupp_pdata micvdd;
/** Regulator configuration for LDO1 */ /** Regulator configuration for LDO1 */
struct regulator_init_data *ldo1; struct arizona_ldo1_pdata ldo1;
/** If a direct 32kHz clock is provided on an MCLK specify it here */ /** If a direct 32kHz clock is provided on an MCLK specify it here */
int clk32k_src; int clk32k_src;
......
/*
* Platform data for Arizona LDO1 regulator
*
* Copyright 2017 Cirrus Logic
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef ARIZONA_LDO1_H
#define ARIZONA_LDO1_H
struct regulator_init_data;
struct arizona_ldo1_pdata {
/** GPIO controlling LDOENA, if any */
int ldoena;
/** Regulator configuration for LDO1 */
const struct regulator_init_data *init_data;
};
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册