提交 aa51e598 编写于 作者: H Hauke Mehrtens 提交者: John W. Linville

brcmsmac: use bcma PCIe up and down functions

replace the calls to bcma_core_pci_extend_L1timer() by calls to the
newly introduced bcma_core_pci_ip() and bcma_core_pci_down()
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: Arend van Spriel <arend@broadcom.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 cfe51ec1
......@@ -679,27 +679,6 @@ bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode)
return mode == BCMA_CLKMODE_FAST;
}
void ai_pci_up(struct si_pub *sih)
{
struct si_info *sii;
sii = container_of(sih, struct si_info, pub);
if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI)
bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], true);
}
/* Unconfigure and/or apply various WARs when going down */
void ai_pci_down(struct si_pub *sih)
{
struct si_info *sii;
sii = container_of(sih, struct si_info, pub);
if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI)
bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], false);
}
/* Enable BT-COEX & Ex-PA for 4313 */
void ai_epa_4313war(struct si_pub *sih)
{
......
......@@ -183,9 +183,6 @@ extern u16 ai_clkctl_fast_pwrup_delay(struct si_pub *sih);
extern bool ai_clkctl_cc(struct si_pub *sih, enum bcma_clkmode mode);
extern bool ai_deviceremoved(struct si_pub *sih);
extern void ai_pci_down(struct si_pub *sih);
extern void ai_pci_up(struct si_pub *sih);
/* Enable Ex-PA for 4313 */
extern void ai_epa_4313war(struct si_pub *sih);
......
......@@ -4669,7 +4669,7 @@ static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core,
brcms_c_coredisable(wlc_hw);
/* Match driver "down" state */
ai_pci_down(wlc_hw->sih);
bcma_core_pci_down(wlc_hw->d11core->bus);
/* turn off pll and xtal to match driver "down" state */
brcms_b_xtal(wlc_hw, OFF);
......@@ -5012,12 +5012,12 @@ static int brcms_b_up_prep(struct brcms_hardware *wlc_hw)
*/
if (brcms_b_radio_read_hwdisabled(wlc_hw)) {
/* put SB PCI in down state again */
ai_pci_down(wlc_hw->sih);
bcma_core_pci_down(wlc_hw->d11core->bus);
brcms_b_xtal(wlc_hw, OFF);
return -ENOMEDIUM;
}
ai_pci_up(wlc_hw->sih);
bcma_core_pci_up(wlc_hw->d11core->bus);
/* reset the d11 core */
brcms_b_corereset(wlc_hw, BRCMS_USE_COREFLAGS);
......@@ -5214,7 +5214,7 @@ static int brcms_b_down_finish(struct brcms_hardware *wlc_hw)
/* turn off primary xtal and pll */
if (!wlc_hw->noreset) {
ai_pci_down(wlc_hw->sih);
bcma_core_pci_down(wlc_hw->d11core->bus);
brcms_b_xtal(wlc_hw, OFF);
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册