Merge tag 'iio-fixes-for-4.14b' of...

Merge tag 'iio-fixes-for-4.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second set of IIO fixes for the 4.14 cycle.

* ade7759
  - Fix a signed extension bug.
* as3935
  - The default noise and watch dog settings were such that the device
    was unusuable in most applications.  Add device tree parameters to
    allow it to be configured to something that will actually work.
* at91-sama5d2 adc
  - Fix handling of legacy device trees that don't provide the new
    trigger edge property.
* dln2-adc
  - Fix a missing Kconfig dependency on IIO_TRIGGERED_BUFFER.
* dummy driver
  - Add a missing break so that writing in_voltage0_thresh_rising_en
    doesn't always result in an error.
* zpa2326
  - Drop a test for an always true condition so that gcc won't spit out
    and unused variable warning.

Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935

@@ -14,3 +14,11 @@ Description:
 		Show or set the gain boost of the amp, from 0-31 range.
 		18 = indoors (default)
 		14 = outdoors
+
+What		/sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date:		May 2017
+KernelVersion:	4.13
+Contact:	Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+		When 1 the noise level is over the trip level and not reporting
+		valid data

Documentation/devicetree/bindings/iio/proximity/as3935.txt

@@ -16,6 +16,10 @@ Optional properties:
 	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
 	  value 0 - 120pF. This will require using the calibration data from
 	  the manufacturer.
+	- ams,nflwdth: Set the noise and watchdog threshold register on
+	  startup. This will need to set according to the noise from the
+	  MCU board, and possibly the local environment. Refer to the
+	  datasheet for the threshold settings.
 
 Example:
 
@@ -27,4 +31,5 @@ as3935@0 {
 	interrupt-parent = <&gpio1>;
 	interrupts = <16 1>;
 	ams,tuning-capacitor-pf = <80>;
+	ams,nflwdth = <0x44>;
 };

drivers/iio/adc/Kconfig

@@ -243,6 +243,8 @@ config DA9150_GPADC
 config DLN2_ADC
 	tristate "Diolan DLN-2 ADC driver support"
 	depends on MFD_DLN2
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say yes here to build support for Diolan DLN-2 ADC.
 

drivers/iio/adc/at91-sama5d2_adc.c

@@ -225,6 +225,7 @@ struct at91_adc_trigger {
 	char				*name;
 	unsigned int			trgmod_value;
 	unsigned int			edge_type;
+	bool				hw_trig;
 };
 
 struct at91_adc_state {
@@ -254,16 +255,25 @@ static const struct at91_adc_trigger at91_adc_trigger_list[] = {
 		.name = "external_rising",
 		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_RISE,
 		.edge_type = IRQ_TYPE_EDGE_RISING,
+		.hw_trig = true,
 	},
 	{
 		.name = "external_falling",
 		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_FALL,
 		.edge_type = IRQ_TYPE_EDGE_FALLING,
+		.hw_trig = true,
 	},
 	{
 		.name = "external_any",
 		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_EXT_TRIG_ANY,
 		.edge_type = IRQ_TYPE_EDGE_BOTH,
+		.hw_trig = true,
+	},
+	{
+		.name = "software",
+		.trgmod_value = AT91_SAMA5D2_TRGR_TRGMOD_NO_TRIGGER,
+		.edge_type = IRQ_TYPE_NONE,
+		.hw_trig = false,
 	},
 };
 
@@ -597,7 +607,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	struct at91_adc_state *st;
 	struct resource	*res;
 	int ret, i;
-	u32 edge_type;
+	u32 edge_type = IRQ_TYPE_NONE;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st));
 	if (!indio_dev)
@@ -641,14 +651,14 @@ static int at91_adc_probe(struct platform_device *pdev)
 	ret = of_property_read_u32(pdev->dev.of_node,
 				   "atmel,trigger-edge-type", &edge_type);
 	if (ret) {
-		dev_err(&pdev->dev,
-			"invalid or missing value for atmel,trigger-edge-type\n");
-		return ret;
+		dev_dbg(&pdev->dev,
+			"atmel,trigger-edge-type not specified, only software trigger available\n");
 	}
 
 	st->selected_trig = NULL;
 
-	for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT; i++)
+	/* find the right trigger, or no trigger at all */
+	for (i = 0; i < AT91_SAMA5D2_HW_TRIG_CNT + 1; i++)
 		if (at91_adc_trigger_list[i].edge_type == edge_type) {
 			st->selected_trig = &at91_adc_trigger_list[i];
 			break;
@@ -717,24 +727,27 @@ static int at91_adc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, indio_dev);
 
-	ret = at91_adc_buffer_init(indio_dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
-		goto per_clk_disable_unprepare;
-	}
+	if (st->selected_trig->hw_trig) {
+		ret = at91_adc_buffer_init(indio_dev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "couldn't initialize the buffer.\n");
+			goto per_clk_disable_unprepare;
+		}
 
-	ret = at91_adc_trigger_init(indio_dev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "couldn't setup the triggers.\n");
-		goto per_clk_disable_unprepare;
+		ret = at91_adc_trigger_init(indio_dev);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "couldn't setup the triggers.\n");
+			goto per_clk_disable_unprepare;
+		}
 	}
 
 	ret = iio_device_register(indio_dev);
 	if (ret < 0)
 		goto per_clk_disable_unprepare;
 
-	dev_info(&pdev->dev, "setting up trigger as %s\n",
-		 st->selected_trig->name);
+	if (st->selected_trig->hw_trig)
+		dev_info(&pdev->dev, "setting up trigger as %s\n",
+			 st->selected_trig->name);
 
 	dev_info(&pdev->dev, "version: %x\n",
 		 readl_relaxed(st->base + AT91_SAMA5D2_VERSION));

drivers/iio/dummy/iio_simple_dummy_events.c

@@ -72,6 +72,7 @@ int iio_simple_dummy_write_event_config(struct iio_dev *indio_dev,
 				st->event_en = state;
 			else
 				return -EINVAL;
+			break;
 		default:
 			return -EINVAL;
 		}

drivers/iio/pressure/zpa2326.c

@@ -865,7 +865,6 @@ static irqreturn_t zpa2326_handle_threaded_irq(int irq, void *data)
 static int zpa2326_wait_oneshot_completion(const struct iio_dev   *indio_dev,
 					   struct zpa2326_private *private)
 {
-	int          ret;
 	unsigned int val;
 	long     timeout;
 
@@ -887,14 +886,11 @@ static int zpa2326_wait_oneshot_completion(const struct iio_dev   *indio_dev,
 		/* Timed out. */
 		zpa2326_warn(indio_dev, "no one shot interrupt occurred (%ld)",
 			     timeout);
-		ret = -ETIME;
-	} else if (timeout < 0) {
-		zpa2326_warn(indio_dev,
-			     "wait for one shot interrupt cancelled");
-		ret = -ERESTARTSYS;
+		return -ETIME;
 	}
 
-	return ret;
+	zpa2326_warn(indio_dev, "wait for one shot interrupt cancelled");
+	return -ERESTARTSYS;
 }
 
 static int zpa2326_init_managed_irq(struct device          *parent,

drivers/iio/proximity/as3935.c

@@ -39,8 +39,12 @@
 #define AS3935_AFE_GAIN_MAX	0x1F
 #define AS3935_AFE_PWR_BIT	BIT(0)
 
+#define AS3935_NFLWDTH		0x01
+#define AS3935_NFLWDTH_MASK	0x7f
+
 #define AS3935_INT		0x03
 #define AS3935_INT_MASK		0x0f
+#define AS3935_DISTURB_INT	BIT(2)
 #define AS3935_EVENT_INT	BIT(3)
 #define AS3935_NOISE_INT	BIT(0)
 
@@ -48,6 +52,7 @@
 #define AS3935_DATA_MASK	0x3F
 
 #define AS3935_TUNE_CAP		0x08
+#define AS3935_DEFAULTS		0x3C
 #define AS3935_CALIBRATE	0x3D
 
 #define AS3935_READ_DATA	BIT(14)
@@ -62,7 +67,9 @@ struct as3935_state {
 	struct mutex lock;
 	struct delayed_work work;
 
+	unsigned long noise_tripped;
 	u32 tune_cap;
+	u32 nflwdth_reg;
 	u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */
 	u8 buf[2] ____cacheline_aligned;
 };
@@ -145,12 +152,29 @@ static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
 	return len;
 }
 
+static ssize_t as3935_noise_level_tripped_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct as3935_state *st = iio_priv(dev_to_iio_dev(dev));
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = sprintf(buf, "%d\n", !time_after(jiffies, st->noise_tripped + HZ));
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
 static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
 	as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0);
 
+static IIO_DEVICE_ATTR(noise_level_tripped, S_IRUGO,
+	as3935_noise_level_tripped_show, NULL, 0);
 
 static struct attribute *as3935_attributes[] = {
 	&iio_dev_attr_sensor_sensitivity.dev_attr.attr,
+	&iio_dev_attr_noise_level_tripped.dev_attr.attr,
 	NULL,
 };
 
@@ -246,7 +270,11 @@ static void as3935_event_work(struct work_struct *work)
 	case AS3935_EVENT_INT:
 		iio_trigger_poll_chained(st->trig);
 		break;
+	case AS3935_DISTURB_INT:
 	case AS3935_NOISE_INT:
+		mutex_lock(&st->lock);
+		st->noise_tripped = jiffies;
+		mutex_unlock(&st->lock);
 		dev_warn(&st->spi->dev, "noise level is too high\n");
 		break;
 	}
@@ -269,15 +297,14 @@ static irqreturn_t as3935_interrupt_handler(int irq, void *private)
 
 static void calibrate_as3935(struct as3935_state *st)
 {
-	/* mask disturber interrupt bit */
-	as3935_write(st, AS3935_INT, BIT(5));
-
+	as3935_write(st, AS3935_DEFAULTS, 0x96);
 	as3935_write(st, AS3935_CALIBRATE, 0x96);
 	as3935_write(st, AS3935_TUNE_CAP,
 		BIT(5) | (st->tune_cap / TUNE_CAP_DIV));
 
 	mdelay(2);
 	as3935_write(st, AS3935_TUNE_CAP, (st->tune_cap / TUNE_CAP_DIV));
+	as3935_write(st, AS3935_NFLWDTH, st->nflwdth_reg);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -370,6 +397,15 @@ static int as3935_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
+	ret = of_property_read_u32(np,
+			"ams,nflwdth", &st->nflwdth_reg);
+	if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) {
+		dev_err(&spi->dev,
+			"invalid nflwdth setting of %d\n",
+			st->nflwdth_reg);
+		return -EINVAL;
+	}
+
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->channels = as3935_channels;
@@ -384,6 +420,7 @@ static int as3935_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	st->trig = trig;
+	st->noise_tripped = jiffies - HZ;
 	trig->dev.parent = indio_dev->dev.parent;
 	iio_trigger_set_drvdata(trig, indio_dev);
 	trig->ops = &iio_interrupt_trigger_ops;

drivers/staging/iio/meter/ade7759.c

@@ -172,7 +172,7 @@ static int ade7759_spi_read_reg_40(struct device *dev,
 				reg_address);
 		goto error_ret;
 	}
-	*val = ((u64)st->rx[1] << 32) | (st->rx[2] << 24) |
+	*val = ((u64)st->rx[1] << 32) | ((u64)st->rx[2] << 24) |
 		(st->rx[3] << 16) | (st->rx[4] << 8) | st->rx[5];
 
 error_ret: