qlogic: Move the QLogic drivers

Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and
the necessary Kconfig and Makefile changes.

CC: Ron Mercer <ron.mercer@qlogic.com>
CC: Amit Kumar Salecha <amit.salecha@qlogic.com>
CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: NAnirban Chakraborty <anirban.chakraborty@qlogic.com>

MAINTAINERS

@@ -4499,7 +4499,7 @@ M:	Amit Kumar Salecha <amit.salecha@qlogic.com>
 L:	netdev@vger.kernel.org
 W:	http://www.qlogic.com
 S:	Supported
-F:	drivers/net/netxen/
+F:	drivers/net/ethernet/qlogic/netxen/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
 M:	Trond Myklebust <Trond.Myklebust@netapp.com>
@@ -5245,7 +5245,7 @@ M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/LICENSE.qla3xxx
-F:	drivers/net/qla3xxx.*
+F:	drivers/net/ethernet/qlogic/qla3xxx.*
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
 M:	Amit Kumar Salecha <amit.salecha@qlogic.com>
@@ -5253,7 +5253,7 @@ M:	Anirban Chakraborty <anirban.chakraborty@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/qlcnic/
+F:	drivers/net/ethernet/qlogic/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
 M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
@@ -5261,7 +5261,7 @@ M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	drivers/net/qlge/
+F:	drivers/net/ethernet/qlogic/qlge/
 
 QNX4 FILESYSTEM
 M:	Anders Larsen <al@alarsen.net>

drivers/net/Kconfig

@@ -1707,15 +1707,6 @@ config XILINX_LL_TEMAC
 	  This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
 	  core used in Xilinx Spartan and Virtex FPGAs
 
-config QLA3XXX
-	tristate "QLogic QLA3XXX Network Driver Support"
-	depends on PCI
-	help
-	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called qla3xxx.
-
 config ATL1
 	tristate "Atheros/Attansic L1 Gigabit Ethernet support"
 	depends on PCI
@@ -1954,23 +1945,6 @@ config TEHUTI
 	help
 	  Tehuti Networks 10G Ethernet NIC
 
-config QLCNIC
-	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
-	depends on PCI
-	select FW_LOADER
-	help
-	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
-	  devices.
-
-config QLGE
-	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
-	depends on PCI
-	help
-	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called qlge.
-
 config BNA
 	tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
 	depends on PCI

drivers/net/Makefile

@@ -110,9 +110,6 @@ obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
 ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
 obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
 obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-obj-$(CONFIG_QLA3XXX) += qla3xxx.o
-obj-$(CONFIG_QLCNIC) += qlcnic/
-obj-$(CONFIG_QLGE) += qlge/
 
 obj-$(CONFIG_PPP) += ppp_generic.o
 obj-$(CONFIG_PPP_ASYNC) += ppp_async.o

drivers/net/ethernet/Kconfig

@@ -17,5 +17,6 @@ source "drivers/net/ethernet/amd/Kconfig"
 source "drivers/net/ethernet/broadcom/Kconfig"
 source "drivers/net/ethernet/chelsio/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
+source "drivers/net/ethernet/qlogic/Kconfig"
 
 endif # ETHERNET

drivers/net/ethernet/Makefile

@@ -8,3 +8,4 @@ obj-$(CONFIG_NET_VENDOR_AMD) += amd/
 obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
 obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
+obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/

drivers/net/ethernet/qlogic/Kconfig

+#
+# QLogic network device configuration
+#
+
+config NET_VENDOR_QLOGIC
+	bool "QLogic devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about QLogic cards. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_QLOGIC
+
+config QLA3XXX
+	tristate "QLogic QLA3XXX Network Driver Support"
+	depends on PCI
+	---help---
+	  This driver supports QLogic ISP3XXX gigabit Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qla3xxx.
+
+config QLCNIC
+	tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
+	depends on PCI
+	select FW_LOADER
+	---help---
+	  This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
+	  devices.
+
+config QLGE
+	tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+	depends on PCI
+	---help---
+	  This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called qlge.
+
+config NETXEN_NIC
+	tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
+	depends on PCI
+	select FW_LOADER
+	---help---
+	  This enables the support for NetXen's Gigabit Ethernet card.
+
+endif # NET_VENDOR_QLOGIC

drivers/net/ethernet/qlogic/Makefile

+#
+# Makefile for the QLogic network device drivers.
+#
+
+obj-$(CONFIG_QLA3XXX) += qla3xxx.o
+obj-$(CONFIG_QLCNIC) += qlcnic/
+obj-$(CONFIG_QLGE) += qlge/
+obj-$(CONFIG_NETXEN_NIC) += netxen/