提交 a9fb6d05 编写于 作者: A Alan Stern 提交者: Greg Kroah-Hartman

usb-storage: make jumpshot a separate module

This patch (as1214) converts usb-storage's jumpshot subdriver into a
separate module.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 2cbbf357
......@@ -110,12 +110,14 @@ config USB_STORAGE_SDDR55
If this driver is compiled as a module, it will be named ums-sddr55.
config USB_STORAGE_JUMPSHOT
bool "Lexar Jumpshot Compact Flash Reader"
tristate "Lexar Jumpshot Compact Flash Reader"
depends on USB_STORAGE
help
Say Y here to include additional code to support the Lexar Jumpshot
USB CompactFlash reader.
If this driver is compiled as a module, it will be named ums-jumpshot.
config USB_STORAGE_ALAUDA
bool "Olympus MAUSB-10/Fuji DPC-R1 support"
depends on USB_STORAGE
......
......@@ -10,7 +10,6 @@ EXTRA_CFLAGS := -Idrivers/scsi
obj-$(CONFIG_USB_STORAGE) += usb-storage.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o
......@@ -28,6 +27,7 @@ obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o
obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o
obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o
obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o
obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += ums-jumpshot.o
obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o
obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o
obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o
......@@ -36,6 +36,7 @@ ums-cypress-objs := cypress_atacb.o
ums-datafab-objs := datafab.o
ums-freecom-objs := freecom.o
ums-isd200-objs := isd200.o
ums-jumpshot-objs := jumpshot.o
ums-sddr09-objs := sddr09.o
ums-sddr55-objs := sddr55.o
ums-usbat-objs := shuttle_usbat.o
......@@ -46,6 +46,7 @@
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <scsi/scsi.h>
......@@ -55,9 +56,57 @@
#include "transport.h"
#include "protocol.h"
#include "debug.h"
#include "jumpshot.h"
/*
* The table of devices
*/
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
vendorName, productName, useProtocol, useTransport, \
initFunction, flags) \
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
struct usb_device_id jumpshot_usb_ids[] = {
# include "unusual_jumpshot.h"
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids);
#undef UNUSUAL_DEV
/*
* The flags table
*/
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
vendor_name, product_name, use_protocol, use_transport, \
init_function, Flags) \
{ \
.vendorName = vendor_name, \
.productName = product_name, \
.useProtocol = use_protocol, \
.useTransport = use_transport, \
.initFunction = init_function, \
}
static struct us_unusual_dev jumpshot_unusual_dev_list[] = {
# include "unusual_jumpshot.h"
{ } /* Terminating entry */
};
#undef UNUSUAL_DEV
struct jumpshot_info {
unsigned long sectors; /* total sector count */
unsigned long ssize; /* sector size in bytes */
/* the following aren't used yet */
unsigned char sense_key;
unsigned long sense_asc; /* additional sense code */
unsigned long sense_ascq; /* additional sense code qualifier */
};
static inline int jumpshot_bulk_read(struct us_data *us,
unsigned char *data,
unsigned int len)
......@@ -429,7 +478,7 @@ static void jumpshot_info_destructor(void *extra)
// Transport for the Lexar 'Jumpshot'
//
int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us)
static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us)
{
struct jumpshot_info *info;
int rc;
......@@ -592,3 +641,49 @@ int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us)
info->sense_ascq = 0x00;
return USB_STOR_TRANSPORT_FAILED;
}
static int jumpshot_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct us_data *us;
int result;
result = usb_stor_probe1(&us, intf, id,
(id - jumpshot_usb_ids) + jumpshot_unusual_dev_list);
if (result)
return result;
us->transport_name = "Lexar Jumpshot Control/Bulk";
us->transport = jumpshot_transport;
us->transport_reset = usb_stor_Bulk_reset;
us->max_lun = 1;
result = usb_stor_probe2(us);
return result;
}
static struct usb_driver jumpshot_driver = {
.name = "ums-jumpshot",
.probe = jumpshot_probe,
.disconnect = usb_stor_disconnect,
.suspend = usb_stor_suspend,
.resume = usb_stor_resume,
.reset_resume = usb_stor_reset_resume,
.pre_reset = usb_stor_pre_reset,
.post_reset = usb_stor_post_reset,
.id_table = jumpshot_usb_ids,
.soft_unbind = 1,
};
static int __init jumpshot_init(void)
{
return usb_register(&jumpshot_driver);
}
static void __exit jumpshot_exit(void)
{
usb_deregister(&jumpshot_driver);
}
module_init(jumpshot_init);
module_exit(jumpshot_exit);
......@@ -794,14 +794,6 @@ UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999,
US_SC_DEVICE, US_PR_DEVICE, option_ms_init,
0),
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
"Lexar",
"Jumpshot USB CF Reader",
US_SC_SCSI, US_PR_JUMPSHOT, NULL,
US_FL_NEED_OVERRIDE ),
#endif
/* Reported by Blake Matheny <bmatheny@purdue.edu> */
UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113,
"Lexar",
......
/* Driver for Lexar "Jumpshot" USB Compact Flash reader
* Header File
*
* Current development and maintenance by:
* (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org)
*
* See jumpshot.c for more explanation
/* Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -21,19 +15,13 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _USB_JUMPSHOT_H
#define _USB_JUMPSHOT_H
extern int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us);
#if defined(CONFIG_USB_STORAGE_JUMPSHOT) || \
defined(CONFIG_USB_STORAGE_JUMPSHOT_MODULE)
struct jumpshot_info {
unsigned long sectors; // total sector count
unsigned long ssize; // sector size in bytes
// the following aren't used yet
unsigned char sense_key;
unsigned long sense_asc; // additional sense code
unsigned long sense_ascq; // additional sense code qualifier
};
UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001,
"Lexar",
"Jumpshot USB CF Reader",
US_SC_SCSI, US_PR_JUMPSHOT, NULL,
US_FL_NEED_OVERRIDE),
#endif
#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */
......@@ -66,9 +66,6 @@
#include "debug.h"
#include "initializers.h"
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#include "jumpshot.h"
#endif
#ifdef CONFIG_USB_STORAGE_ONETOUCH
#include "onetouch.h"
#endif
......@@ -601,15 +598,6 @@ static void get_transport(struct us_data *us)
us->transport_reset = usb_stor_Bulk_reset;
break;
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
case US_PR_JUMPSHOT:
us->transport_name = "Lexar Jumpshot Control/Bulk";
us->transport = jumpshot_transport;
us->transport_reset = usb_stor_Bulk_reset;
us->max_lun = 1;
break;
#endif
#ifdef CONFIG_USB_STORAGE_ALAUDA
case US_PR_ALAUDA:
us->transport_name = "Alauda Control/Bulk";
......
......@@ -81,6 +81,7 @@ static struct ignore_entry ignore_ids[] = {
# include "unusual_datafab.h"
# include "unusual_freecom.h"
# include "unusual_isd200.h"
# include "unusual_jumpshot.h"
# include "unusual_sddr09.h"
# include "unusual_sddr55.h"
# include "unusual_usbat.h"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册