提交 a9a29ce6 编写于 作者: G Gabor Juhos 提交者: John W. Linville

ath9k: enable 2GHz band only if the device supports it

Currently, the 2GHz band is enabled unconditionally, even if the device
does not support it.

Changes-licensed-under: ISC
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 1f351e38
......@@ -976,7 +976,10 @@ int ath9k_hw_init(struct ath_hw *ah)
return r;
ath9k_hw_init_mode_gain_regs(ah);
ath9k_hw_fill_cap_info(ah);
r = ath9k_hw_fill_cap_info(ah);
if (r)
return r;
ath9k_hw_init_11a_eeprom_fix(ah);
r = ath9k_hw_init_macaddr(ah);
......@@ -3112,7 +3115,7 @@ EXPORT_SYMBOL(ath9k_hw_set_sta_beacon_timers);
/* HW Capabilities */
/*******************/
void ath9k_hw_fill_cap_info(struct ath_hw *ah)
int ath9k_hw_fill_cap_info(struct ath_hw *ah)
{
struct ath9k_hw_capabilities *pCap = &ah->caps;
struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
......@@ -3143,6 +3146,12 @@ void ath9k_hw_fill_cap_info(struct ath_hw *ah)
}
eeval = ah->eep_ops->get_eeprom(ah, EEP_OP_MODE);
if ((eeval & (AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A)) == 0) {
ath_print(common, ATH_DBG_FATAL,
"no band has been marked as supported in EEPROM.\n");
return -EINVAL;
}
bitmap_zero(pCap->wireless_modes, ATH9K_MODE_MAX);
if (eeval & AR5416_OPFLAGS_11A) {
......@@ -3306,6 +3315,8 @@ void ath9k_hw_fill_cap_info(struct ath_hw *ah)
} else {
btcoex_hw->scheme = ATH_BTCOEX_CFG_NONE;
}
return 0;
}
bool ath9k_hw_getcapability(struct ath_hw *ah, enum ath9k_capability_type type,
......
......@@ -620,7 +620,7 @@ void ath9k_hw_detach(struct ath_hw *ah);
int ath9k_hw_init(struct ath_hw *ah);
int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
bool bChannelChange);
void ath9k_hw_fill_cap_info(struct ath_hw *ah);
int ath9k_hw_fill_cap_info(struct ath_hw *ah);
bool ath9k_hw_getcapability(struct ath_hw *ah, enum ath9k_capability_type type,
u32 capability, u32 *result);
bool ath9k_hw_setcapability(struct ath_hw *ah, enum ath9k_capability_type type,
......
......@@ -1793,13 +1793,15 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
/* setup channels and rates */
sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
ARRAY_SIZE(ath9k_2ghz_chantable);
sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
ARRAY_SIZE(ath9k_legacy_rates);
if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) {
sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable;
sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ;
sc->sbands[IEEE80211_BAND_2GHZ].n_channels =
ARRAY_SIZE(ath9k_2ghz_chantable);
sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates;
sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates =
ARRAY_SIZE(ath9k_legacy_rates);
}
if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) {
sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable;
......@@ -1876,8 +1878,9 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
hw->rate_control_algorithm = "ath9k_rate_control";
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&sc->sbands[IEEE80211_BAND_2GHZ];
if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes))
hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
&sc->sbands[IEEE80211_BAND_2GHZ];
if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&sc->sbands[IEEE80211_BAND_5GHZ];
......@@ -1916,9 +1919,12 @@ int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
reg = &common->regulatory;
if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
if (test_bit(ATH9K_MODE_11G, ah->caps.wireless_modes))
setup_ht_cap(sc,
&sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
setup_ht_cap(sc,
&sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
}
/* initialize tx/rx engine */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册