提交 a940d9a1 编写于 作者: T Tony Lindgren

ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end

We can't use hardcoded interrupts for SPARSE_IRQ, and can replace
the hardcoded gpio_base with twl_gpiochip.base after it's been
allocated.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 714df7b8
......@@ -211,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = {
};
static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
};
static struct twl4030_platform_data sdp2430_twldata = {
......
......@@ -229,9 +229,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(16) | BIT(17),
.setup = sdp3430_twl_gpio_setup,
......
......@@ -543,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.vibra = &twl6040_vibra,
.audpwron_gpio = 127,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
static struct twl4030_platform_data sdp4430_twldata = {
......
......@@ -469,9 +469,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
}
static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = cm_t35_twl_gpio_setup,
};
......
......@@ -235,9 +235,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(15) | BIT(16) | BIT(17),
......
......@@ -424,9 +424,6 @@ static int igep_twl_gpio_setup(struct device *dev,
};
static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = igep_twl_gpio_setup,
};
......
......@@ -274,9 +274,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
}
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = ldp_twl_gpio_setup,
};
......
......@@ -296,9 +296,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data beagle_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
......
......@@ -388,9 +388,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = omap3evm_twl_gpio_setup,
};
......
......@@ -77,9 +77,6 @@ static struct regulator_init_data omap3logic_vmmc1 = {
};
static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8)
......
......@@ -320,9 +320,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = omap3pandora_twl_gpio_setup,
};
......
......@@ -278,9 +278,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = omap3stalker_twl_gpio_setup,
};
......
......@@ -138,9 +138,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data touchbook_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.pullups = BIT(1),
.pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
......
......@@ -262,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = {
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.audpwron_gpio = 127,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
/* Panda board uses the common PMIC configuration */
......
......@@ -398,9 +398,6 @@ static int overo_twl_gpio_setup(struct device *dev,
}
static struct twl4030_gpio_platform_data overo_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
.setup = overo_twl_gpio_setup,
};
......
......@@ -72,9 +72,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = {
/* TWL */
static struct twl4030_gpio_platform_data rm680_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.pullups = BIT(0),
.pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
};
......
......@@ -773,9 +773,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
}
static struct twl4030_gpio_platform_data rx51_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3)
| BIT(4) | BIT(5)
| BIT(8) | BIT(9) | BIT(10) | BIT(11)
......
......@@ -251,9 +251,6 @@ static void zoom2_set_hs_extmute(int mute)
}
static struct twl4030_gpio_platform_data zoom_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = zoom_twl_gpio_setup,
};
......
......@@ -51,6 +51,7 @@
static struct gpio_chip twl_gpiochip;
static int twl4030_gpio_base;
static int twl4030_gpio_irq_base;
/* genirq interfaces are not available to modules */
......@@ -428,8 +429,6 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
twl_gpiochip.dev = &pdev->dev;
if (pdata) {
twl_gpiochip.base = pdata->gpio_base;
/*
* NOTE: boards may waste power if they don't set pullups
* and pulldowns correctly ... default for non-ULPI pins is
......@@ -461,15 +460,21 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
twl_gpiochip.ngpio = 0;
gpio_twl4030_remove(pdev);
} else if (pdata && pdata->setup) {
goto out;
}
twl4030_gpio_base = twl_gpiochip.base;
if (pdata && pdata->setup) {
int status;
status = pdata->setup(&pdev->dev,
pdata->gpio_base, TWL4030_GPIO_MAX);
twl4030_gpio_base, TWL4030_GPIO_MAX);
if (status)
dev_dbg(&pdev->dev, "setup --> %d\n", status);
}
out:
return ret;
}
......@@ -481,7 +486,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
if (pdata && pdata->teardown) {
status = pdata->teardown(&pdev->dev,
pdata->gpio_base, TWL4030_GPIO_MAX);
twl4030_gpio_base, TWL4030_GPIO_MAX);
if (status) {
dev_dbg(&pdev->dev, "teardown --> %d\n", status);
return status;
......
......@@ -561,9 +561,6 @@ struct twl4030_bci_platform_data {
/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
struct twl4030_gpio_platform_data {
int gpio_base;
unsigned irq_base, irq_end;
/* package the two LED signals as output-only GPIOs? */
bool use_leds;
......
......@@ -194,7 +194,6 @@ struct twl6040_vibra_data {
struct twl6040_platform_data {
int audpwron_gpio; /* audio power-on gpio */
unsigned int irq_base;
struct twl6040_codec_data *codec;
struct twl6040_vibra_data *vibra;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册