提交 a92f63cd 编写于 作者: L Linus Torvalds

Merge tag 'powerpc-4.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "Mostly fairly minor, of note are:

   - Fix percpu allocations to be NUMA aware

   - Limit 4k page size config to 64TB virtual address space

   - Avoid needlessly restoring FP and vector registers

  Thanks to Aneesh Kumar K.V, Breno Leitao, Christophe Leroy, Frederic
  Barrat, Madhavan Srinivasan, Michael Bringmann, Nicholas Piggin,
  Vaibhav Jain"

* tag 'powerpc-4.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/book3s64: Move PPC_DT_CPU_FTRs and enable it by default
  powerpc/mm/4k: Limit 4k page size config to 64TB virtual address space
  cxl: Fix error path on bad ioctl
  powerpc/perf: Fix Power9 test_adder fields
  powerpc/numa: Fix percpu allocations to be NUMA aware
  cxl: Avoid double free_irq() for psl,slice interrupts
  powerpc/kernel: Initialize load_tm on task creation
  powerpc/kernel: Fix FP and vector register restoration
  powerpc/64: Reclaim CPU_FTR_SUBCORE
  powerpc/hotplug-mem: Fix missing endian conversion of aa_index
  powerpc/sysdev/simple_gpio: Fix oops in gpio save_regs function
  powerpc/spufs: Fix coredump of SPU contexts
  powerpc/64s: Add dt_cpu_ftrs boot time setup option
......@@ -866,6 +866,15 @@
dscc4.setup= [NET]
dt_cpu_ftrs= [PPC]
Format: {"off" | "known"}
Control how the dt_cpu_ftrs device-tree binding is
used for CPU feature discovery and setup (if it
exists).
off: Do not use it, fall back to legacy cpu table.
known: Do not pass through unknown features to guests
or userspace, only those that the kernel is aware of.
dump_apple_properties [X86]
Dump name and content of EFI device properties on
x86 Macs. Useful for driver authors to determine
......
......@@ -380,22 +380,6 @@ source "arch/powerpc/platforms/Kconfig"
menu "Kernel options"
config PPC_DT_CPU_FTRS
bool "Device-tree based CPU feature discovery & setup"
depends on PPC_BOOK3S_64
default n
help
This enables code to use a new device tree binding for describing CPU
compatibility and features. Saying Y here will attempt to use the new
binding if the firmware provides it. Currently only the skiboot
firmware provides this binding.
If you're not sure say Y.
config PPC_CPUFEATURES_ENABLE_UNKNOWN
bool "cpufeatures pass through unknown features to guest/userspace"
depends on PPC_DT_CPU_FTRS
default y
config HIGHMEM
bool "High memory support"
depends on PPC32
......
......@@ -8,7 +8,7 @@
#define H_PTE_INDEX_SIZE 9
#define H_PMD_INDEX_SIZE 7
#define H_PUD_INDEX_SIZE 9
#define H_PGD_INDEX_SIZE 12
#define H_PGD_INDEX_SIZE 9
#ifndef __ASSEMBLY__
#define H_PTE_TABLE_SIZE (sizeof(pte_t) << H_PTE_INDEX_SIZE)
......
......@@ -214,7 +214,6 @@ enum {
#define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000)
#define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000)
#define CPU_FTR_PMAO_BUG LONG_ASM_CONST(0x1000000000000000)
#define CPU_FTR_SUBCORE LONG_ASM_CONST(0x2000000000000000)
#define CPU_FTR_POWER9_DD1 LONG_ASM_CONST(0x4000000000000000)
#ifndef __ASSEMBLY__
......@@ -463,7 +462,7 @@ enum {
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \
CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_SUBCORE)
CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP)
#define CPU_FTRS_POWER8E (CPU_FTRS_POWER8 | CPU_FTR_PMAO_BUG)
#define CPU_FTRS_POWER8_DD1 (CPU_FTRS_POWER8 & ~CPU_FTR_DBELL)
#define CPU_FTRS_POWER9 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
......
......@@ -110,13 +110,18 @@ void release_thread(struct task_struct *);
#define TASK_SIZE_128TB (0x0000800000000000UL)
#define TASK_SIZE_512TB (0x0002000000000000UL)
#ifdef CONFIG_PPC_BOOK3S_64
/*
* For now 512TB is only supported with book3s and 64K linux page size.
*/
#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_64K_PAGES)
/*
* Max value currently used:
*/
#define TASK_SIZE_USER64 TASK_SIZE_512TB
#define TASK_SIZE_USER64 TASK_SIZE_512TB
#define DEFAULT_MAP_WINDOW_USER64 TASK_SIZE_128TB
#else
#define TASK_SIZE_USER64 TASK_SIZE_64TB
#define TASK_SIZE_USER64 TASK_SIZE_64TB
#define DEFAULT_MAP_WINDOW_USER64 TASK_SIZE_64TB
#endif
/*
......@@ -132,7 +137,7 @@ void release_thread(struct task_struct *);
* space during mmap's.
*/
#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_128TB / 4))
#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(DEFAULT_MAP_WINDOW_USER64 / 4))
#define TASK_UNMAPPED_BASE ((is_32bit_task()) ? \
TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
......@@ -143,21 +148,15 @@ void release_thread(struct task_struct *);
* with 128TB and conditionally enable upto 512TB
*/
#ifdef CONFIG_PPC_BOOK3S_64
#define DEFAULT_MAP_WINDOW ((is_32bit_task()) ? \
TASK_SIZE_USER32 : TASK_SIZE_128TB)
#define DEFAULT_MAP_WINDOW ((is_32bit_task()) ? \
TASK_SIZE_USER32 : DEFAULT_MAP_WINDOW_USER64)
#else
#define DEFAULT_MAP_WINDOW TASK_SIZE
#endif
#ifdef __powerpc64__
#ifdef CONFIG_PPC_BOOK3S_64
/* Limit stack to 128TB */
#define STACK_TOP_USER64 TASK_SIZE_128TB
#else
#define STACK_TOP_USER64 TASK_SIZE_USER64
#endif
#define STACK_TOP_USER64 DEFAULT_MAP_WINDOW_USER64
#define STACK_TOP_USER32 TASK_SIZE_USER32
#define STACK_TOP (is_32bit_task() ? \
......
......@@ -44,8 +44,22 @@ extern void __init dump_numa_cpu_topology(void);
extern int sysfs_add_device_to_node(struct device *dev, int nid);
extern void sysfs_remove_device_from_node(struct device *dev, int nid);
static inline int early_cpu_to_node(int cpu)
{
int nid;
nid = numa_cpu_lookup_table[cpu];
/*
* Fall back to node 0 if nid is unset (it should be, except bugs).
* This allows callers to safely do NODE_DATA(early_cpu_to_node(cpu)).
*/
return (nid < 0) ? 0 : nid;
}
#else
static inline int early_cpu_to_node(int cpu) { return 0; }
static inline void dump_numa_cpu_topology(void) {}
static inline int sysfs_add_device_to_node(struct device *dev, int nid)
......
......@@ -8,6 +8,7 @@
#include <linux/export.h>
#include <linux/init.h>
#include <linux/jump_label.h>
#include <linux/libfdt.h>
#include <linux/memblock.h>
#include <linux/printk.h>
#include <linux/sched.h>
......@@ -642,7 +643,6 @@ static struct dt_cpu_feature_match __initdata
{"processor-control-facility", feat_enable_dbell, CPU_FTR_DBELL},
{"processor-control-facility-v3", feat_enable_dbell, CPU_FTR_DBELL},
{"processor-utilization-of-resources-register", feat_enable_purr, 0},
{"subcore", feat_enable, CPU_FTR_SUBCORE},
{"no-execute", feat_enable, 0},
{"strong-access-ordering", feat_enable, CPU_FTR_SAO},
{"cache-inhibited-large-page", feat_enable_large_ci, 0},
......@@ -671,12 +671,24 @@ static struct dt_cpu_feature_match __initdata
{"wait-v3", feat_enable, 0},
};
/* XXX: how to configure this? Default + boot time? */
#ifdef CONFIG_PPC_CPUFEATURES_ENABLE_UNKNOWN
#define CPU_FEATURE_ENABLE_UNKNOWN 1
#else
#define CPU_FEATURE_ENABLE_UNKNOWN 0
#endif
static bool __initdata using_dt_cpu_ftrs;
static bool __initdata enable_unknown = true;
static int __init dt_cpu_ftrs_parse(char *str)
{
if (!str)
return 0;
if (!strcmp(str, "off"))
using_dt_cpu_ftrs = false;
else if (!strcmp(str, "known"))
enable_unknown = false;
else
return 1;
return 0;
}
early_param("dt_cpu_ftrs", dt_cpu_ftrs_parse);
static void __init cpufeatures_setup_start(u32 isa)
{
......@@ -707,7 +719,7 @@ static bool __init cpufeatures_process_feature(struct dt_cpu_feature *f)
}
}
if (!known && CPU_FEATURE_ENABLE_UNKNOWN) {
if (!known && enable_unknown) {
if (!feat_try_enable_unknown(f)) {
pr_info("not enabling: %s (unknown and unsupported by kernel)\n",
f->name);
......@@ -756,6 +768,26 @@ static void __init cpufeatures_setup_finished(void)
cur_cpu_spec->cpu_features, cur_cpu_spec->mmu_features);
}
static int __init disabled_on_cmdline(void)
{
unsigned long root, chosen;
const char *p;
root = of_get_flat_dt_root();
chosen = of_get_flat_dt_subnode_by_name(root, "chosen");
if (chosen == -FDT_ERR_NOTFOUND)
return false;
p = of_get_flat_dt_prop(chosen, "bootargs", NULL);
if (!p)
return false;
if (strstr(p, "dt_cpu_ftrs=off"))
return true;
return false;
}
static int __init fdt_find_cpu_features(unsigned long node, const char *uname,
int depth, void *data)
{
......@@ -766,8 +798,6 @@ static int __init fdt_find_cpu_features(unsigned long node, const char *uname,
return 0;
}
static bool __initdata using_dt_cpu_ftrs = false;
bool __init dt_cpu_ftrs_in_use(void)
{
return using_dt_cpu_ftrs;
......@@ -775,6 +805,8 @@ bool __init dt_cpu_ftrs_in_use(void)
bool __init dt_cpu_ftrs_init(void *fdt)
{
using_dt_cpu_ftrs = false;
/* Setup and verify the FDT, if it fails we just bail */
if (!early_init_dt_verify(fdt))
return false;
......@@ -782,6 +814,9 @@ bool __init dt_cpu_ftrs_init(void *fdt)
if (!of_scan_flat_dt(fdt_find_cpu_features, NULL))
return false;
if (disabled_on_cmdline())
return false;
cpufeatures_setup_cpu();
using_dt_cpu_ftrs = true;
......@@ -1027,5 +1062,8 @@ static int __init dt_cpu_ftrs_scan_callback(unsigned long node, const char
void __init dt_cpu_ftrs_scan(void)
{
if (!using_dt_cpu_ftrs)
return;
of_scan_flat_dt(dt_cpu_ftrs_scan_callback, NULL);
}
......@@ -1666,6 +1666,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
#ifdef CONFIG_VSX
current->thread.used_vsr = 0;
#endif
current->thread.load_fp = 0;
memset(&current->thread.fp_state, 0, sizeof(current->thread.fp_state));
current->thread.fp_save_area = NULL;
#ifdef CONFIG_ALTIVEC
......@@ -1674,6 +1675,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
current->thread.vr_save_area = NULL;
current->thread.vrsave = 0;
current->thread.used_vr = 0;
current->thread.load_vec = 0;
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_SPE
memset(current->thread.evr, 0, sizeof(current->thread.evr));
......@@ -1685,6 +1687,7 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
current->thread.tm_tfhar = 0;
current->thread.tm_texasr = 0;
current->thread.tm_tfiar = 0;
current->thread.load_tm = 0;
#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
}
EXPORT_SYMBOL(start_thread);
......
......@@ -928,7 +928,7 @@ void __init setup_arch(char **cmdline_p)
#ifdef CONFIG_PPC_MM_SLICES
#ifdef CONFIG_PPC64
init_mm.context.addr_limit = TASK_SIZE_128TB;
init_mm.context.addr_limit = DEFAULT_MAP_WINDOW_USER64;
#else
#error "context.addr_limit not initialized."
#endif
......
......@@ -661,7 +661,7 @@ void __init emergency_stack_init(void)
static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
{
return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align,
return __alloc_bootmem_node(NODE_DATA(early_cpu_to_node(cpu)), size, align,
__pa(MAX_DMA_ADDRESS));
}
......@@ -672,7 +672,7 @@ static void __init pcpu_fc_free(void *ptr, size_t size)
static int pcpu_cpu_distance(unsigned int from, unsigned int to)
{
if (cpu_to_node(from) == cpu_to_node(to))
if (early_cpu_to_node(from) == early_cpu_to_node(to))
return LOCAL_DISTANCE;
else
return REMOTE_DISTANCE;
......
......@@ -99,7 +99,7 @@ static int hash__init_new_context(struct mm_struct *mm)
* mm->context.addr_limit. Default to max task size so that we copy the
* default values to paca which will help us to handle slb miss early.
*/
mm->context.addr_limit = TASK_SIZE_128TB;
mm->context.addr_limit = DEFAULT_MAP_WINDOW_USER64;
/*
* The old code would re-promote on fork, we don't do that when using
......
......@@ -402,7 +402,7 @@ static struct power_pmu power9_isa207_pmu = {
.name = "POWER9",
.n_counter = MAX_PMU_COUNTERS,
.add_fields = ISA207_ADD_FIELDS,
.test_adder = ISA207_TEST_ADDER,
.test_adder = P9_DD1_TEST_ADDER,
.compute_mmcr = isa207_compute_mmcr,
.config_bhrb = power9_config_bhrb,
.bhrb_filter_map = power9_bhrb_filter_map,
......@@ -421,7 +421,7 @@ static struct power_pmu power9_pmu = {
.name = "POWER9",
.n_counter = MAX_PMU_COUNTERS,
.add_fields = ISA207_ADD_FIELDS,
.test_adder = P9_DD1_TEST_ADDER,
.test_adder = ISA207_TEST_ADDER,
.compute_mmcr = isa207_compute_mmcr,
.config_bhrb = power9_config_bhrb,
.bhrb_filter_map = power9_bhrb_filter_map,
......
......@@ -59,6 +59,17 @@ config PPC_OF_BOOT_TRAMPOLINE
In case of doubt, say Y
config PPC_DT_CPU_FTRS
bool "Device-tree based CPU feature discovery & setup"
depends on PPC_BOOK3S_64
default y
help
This enables code to use a new device tree binding for describing CPU
compatibility and features. Saying Y here will attempt to use the new
binding if the firmware provides it. Currently only the skiboot
firmware provides this binding.
If you're not sure say Y.
config UDBG_RTAS_CONSOLE
bool "RTAS based debug console"
depends on PPC_RTAS
......
......@@ -175,6 +175,8 @@ static int spufs_arch_write_note(struct spu_context *ctx, int i,
skip = roundup(cprm->pos - total + sz, 4) - cprm->pos;
if (!dump_skip(cprm, skip))
goto Eio;
rc = 0;
out:
free_page((unsigned long)buf);
return rc;
......
......@@ -407,7 +407,13 @@ static DEVICE_ATTR(subcores_per_core, 0644,
static int subcore_init(void)
{
if (!cpu_has_feature(CPU_FTR_SUBCORE))
unsigned pvr_ver;
pvr_ver = PVR_VER(mfspr(SPRN_PVR));
if (pvr_ver != PVR_POWER8 &&
pvr_ver != PVR_POWER8E &&
pvr_ver != PVR_POWER8NVL)
return 0;
/*
......
......@@ -124,6 +124,7 @@ static struct property *dlpar_clone_drconf_property(struct device_node *dn)
for (i = 0; i < num_lmbs; i++) {
lmbs[i].base_addr = be64_to_cpu(lmbs[i].base_addr);
lmbs[i].drc_index = be32_to_cpu(lmbs[i].drc_index);
lmbs[i].aa_index = be32_to_cpu(lmbs[i].aa_index);
lmbs[i].flags = be32_to_cpu(lmbs[i].flags);
}
......@@ -147,6 +148,7 @@ static void dlpar_update_drconf_property(struct device_node *dn,
for (i = 0; i < num_lmbs; i++) {
lmbs[i].base_addr = cpu_to_be64(lmbs[i].base_addr);
lmbs[i].drc_index = cpu_to_be32(lmbs[i].drc_index);
lmbs[i].aa_index = cpu_to_be32(lmbs[i].aa_index);
lmbs[i].flags = cpu_to_be32(lmbs[i].flags);
}
......
......@@ -75,7 +75,8 @@ static int u8_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
{
struct u8_gpio_chip *u8_gc = gpiochip_get_data(&mm_gc->gc);
struct u8_gpio_chip *u8_gc =
container_of(mm_gc, struct u8_gpio_chip, mm_gc);
u8_gc->data = in_8(mm_gc->regs);
}
......
......@@ -159,11 +159,8 @@ static long afu_ioctl_start_work(struct cxl_context *ctx,
/* Do this outside the status_mutex to avoid a circular dependency with
* the locking in cxl_mmap_fault() */
if (copy_from_user(&work, uwork,
sizeof(struct cxl_ioctl_start_work))) {
rc = -EFAULT;
goto out;
}
if (copy_from_user(&work, uwork, sizeof(work)))
return -EFAULT;
mutex_lock(&ctx->status_mutex);
if (ctx->status != OPENED) {
......
......@@ -1302,13 +1302,16 @@ int cxl_native_register_psl_err_irq(struct cxl *adapter)
void cxl_native_release_psl_err_irq(struct cxl *adapter)
{
if (adapter->native->err_virq != irq_find_mapping(NULL, adapter->native->err_hwirq))
if (adapter->native->err_virq == 0 ||
adapter->native->err_virq !=
irq_find_mapping(NULL, adapter->native->err_hwirq))
return;
cxl_p1_write(adapter, CXL_PSL_ErrIVTE, 0x0000000000000000);
cxl_unmap_irq(adapter->native->err_virq, adapter);
cxl_ops->release_one_irq(adapter, adapter->native->err_hwirq);
kfree(adapter->irq_name);
adapter->native->err_virq = 0;
}
int cxl_native_register_serr_irq(struct cxl_afu *afu)
......@@ -1346,13 +1349,15 @@ int cxl_native_register_serr_irq(struct cxl_afu *afu)
void cxl_native_release_serr_irq(struct cxl_afu *afu)
{
if (afu->serr_virq != irq_find_mapping(NULL, afu->serr_hwirq))
if (afu->serr_virq == 0 ||
afu->serr_virq != irq_find_mapping(NULL, afu->serr_hwirq))
return;
cxl_p1n_write(afu, CXL_PSL_SERR_An, 0x0000000000000000);
cxl_unmap_irq(afu->serr_virq, afu);
cxl_ops->release_one_irq(afu->adapter, afu->serr_hwirq);
kfree(afu->err_irq_name);
afu->serr_virq = 0;
}
int cxl_native_register_psl_irq(struct cxl_afu *afu)
......@@ -1375,12 +1380,15 @@ int cxl_native_register_psl_irq(struct cxl_afu *afu)
void cxl_native_release_psl_irq(struct cxl_afu *afu)
{
if (afu->native->psl_virq != irq_find_mapping(NULL, afu->native->psl_hwirq))
if (afu->native->psl_virq == 0 ||
afu->native->psl_virq !=
irq_find_mapping(NULL, afu->native->psl_hwirq))
return;
cxl_unmap_irq(afu->native->psl_virq, afu);
cxl_ops->release_one_irq(afu->adapter, afu->native->psl_hwirq);
kfree(afu->psl_irq_name);
afu->native->psl_virq = 0;
}
static void recover_psl_err(struct cxl_afu *afu, u64 errstat)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册