Merge tag 'usb-serial-4.5-rc2' of...

Merge tag 'usb-serial-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for v4.5-rc2

Here are two fixes of crashes in the visor driver that could be
triggered using bad (malicious) descriptors, a fix for two memory leaks
in the new mxu11x0 driver, and an interface-blacklist fix for the option
driver.

Included are also some new device ids.
Signed-off-by: NJohan Hovold <johan@kernel.org>

drivers/usb/serial/cp210x.c

@@ -99,6 +99,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
 	{ USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */
 	{ USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+	{ USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */
 	{ USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
 	{ USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */

drivers/usb/serial/ftdi_sio.c

@@ -824,6 +824,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
+	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 
 	/* Papouch devices based on FTDI chip */

drivers/usb/serial/ftdi_sio_ids.h

@@ -615,6 +615,7 @@
  */
 #define RATOC_VENDOR_ID		0x0584
 #define RATOC_PRODUCT_ID_USB60F	0xb020
+#define RATOC_PRODUCT_ID_SCU18	0xb03a
 
 /*
  * Infineon Technologies

drivers/usb/serial/mxu11x0.c

@@ -368,6 +368,16 @@ static int mxu1_port_probe(struct usb_serial_port *port)
 	return 0;
 }
 
+static int mxu1_port_remove(struct usb_serial_port *port)
+{
+	struct mxu1_port *mxport;
+
+	mxport = usb_get_serial_port_data(port);
+	kfree(mxport);
+
+	return 0;
+}
+
 static int mxu1_startup(struct usb_serial *serial)
 {
 	struct mxu1_device *mxdev;
@@ -427,6 +437,14 @@ static int mxu1_startup(struct usb_serial *serial)
 	return err;
 }
 
+static void mxu1_release(struct usb_serial *serial)
+{
+	struct mxu1_device *mxdev;
+
+	mxdev = usb_get_serial_data(serial);
+	kfree(mxdev);
+}
+
 static int mxu1_write_byte(struct usb_serial_port *port, u32 addr,
 			   u8 mask, u8 byte)
 {
@@ -957,7 +975,9 @@ static struct usb_serial_driver mxu11x0_device = {
 	.id_table		= mxu1_idtable,
 	.num_ports		= 1,
 	.port_probe             = mxu1_port_probe,
+	.port_remove            = mxu1_port_remove,
 	.attach			= mxu1_startup,
+	.release                = mxu1_release,
 	.open			= mxu1_open,
 	.close			= mxu1_close,
 	.ioctl			= mxu1_ioctl,

drivers/usb/serial/option.c

@@ -268,6 +268,8 @@ static void option_instat_callback(struct urb *urb);
 #define TELIT_PRODUCT_CC864_SINGLE		0x1006
 #define TELIT_PRODUCT_DE910_DUAL		0x1010
 #define TELIT_PRODUCT_UE910_V2			0x1012
+#define TELIT_PRODUCT_LE922_USBCFG0		0x1042
+#define TELIT_PRODUCT_LE922_USBCFG3		0x1043
 #define TELIT_PRODUCT_LE920			0x1200
 #define TELIT_PRODUCT_LE910			0x1201
 
@@ -615,6 +617,16 @@ static const struct option_blacklist_info telit_le920_blacklist = {
 	.reserved = BIT(1) | BIT(5),
 };
 
+static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = {
+	.sendsetup = BIT(2),
+	.reserved = BIT(0) | BIT(1) | BIT(3),
+};
+
+static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = {
+	.sendsetup = BIT(0),
+	.reserved = BIT(1) | BIT(2) | BIT(3),
+};
+
 static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -1160,6 +1172,10 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0),
+		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
+	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
+		.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 		.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
@@ -1679,7 +1695,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
-	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) },
+	{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX),
 		.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
 	{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, 

drivers/usb/serial/visor.c

@@ -544,6 +544,11 @@ static int treo_attach(struct usb_serial *serial)
 		(serial->num_interrupt_in == 0))
 		return 0;
 
+	if (serial->num_bulk_in < 2 || serial->num_interrupt_in < 2) {
+		dev_err(&serial->interface->dev, "missing endpoints\n");
+		return -ENODEV;
+	}
+
 	/*
 	* It appears that Treos and Kyoceras want to use the
 	* 1st bulk in endpoint to communicate with the 2nd bulk out endpoint,
@@ -597,8 +602,10 @@ static int clie_5_attach(struct usb_serial *serial)
 	 */
 
 	/* some sanity check */
-	if (serial->num_ports < 2)
-		return -1;
+	if (serial->num_bulk_out < 2) {
+		dev_err(&serial->interface->dev, "missing bulk out endpoints\n");
+		return -ENODEV;
+	}
 
 	/* port 0 now uses the modified endpoint Address */
 	port = serial->port[0];