Merge branch 'r8152'

Hayes Wang says:

====================
r8152: support setting eee by ethtool

Modify some definitions about EEE, and add the support of setting
the EEE through ethtool.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/usb/r8152.c

@@ -22,6 +22,8 @@
 #include <linux/ip.h>
 #include <linux/ipv6.h>
 #include <net/ip6_checksum.h>
+#include <uapi/linux/mdio.h>
+#include <linux/mdio.h>
 
 /* Version Information */
 #define DRIVER_VERSION "v1.06.0 (2014/03/03)"
@@ -129,7 +131,9 @@
 #define OCP_SRAM_ADDR		0xa436
 #define OCP_SRAM_DATA		0xa438
 #define OCP_DOWN_SPEED		0xa442
-#define OCP_EEE_CFG2		0xa5d0
+#define OCP_EEE_ABLE		0xa5c4
+#define OCP_EEE_ADV		0xa5d0
+#define OCP_EEE_LPABLE		0xa5d2
 #define OCP_ADC_CFG		0xbc06
 
 /* SRAM Register */
@@ -361,7 +365,8 @@
 #define EEE_NWAY_EN		0x1000
 #define TX_QUIET_EN		0x0200
 #define RX_QUIET_EN		0x0100
-#define SDRISETIME		0x0010	/* bit 4 ~ 6 */
+#define sd_rise_time_mask	0x0070
+#define sd_rise_time(x)		(min(x, 7) << 4)	/* bit 4 ~ 6 */
 #define RG_RXLPI_MSK_HFDUP	0x0008
 #define SDFALLTIME		0x0007	/* bit 0 ~ 2 */
 
@@ -373,7 +378,8 @@
 #define RG_EEEPRG_EN		0x0010
 
 /* OCP_EEE_CONFIG3 */
-#define FST_SNR_EYE_R		0x1500	/* bit 7 ~ 15 */
+#define fast_snr_mask		0xff80
+#define fast_snr(x)		(min(x, 0x1ff) << 7)	/* bit 7 ~ 15 */
 #define RG_LFS_SEL		0x0060	/* bit 6 ~ 5 */
 #define MSK_PH			0x0006	/* bit 0 ~ 3 */
 
@@ -382,11 +388,6 @@
 #define FUN_ADDR		0x0000
 #define FUN_DATA		0x4000
 /* bit[4:0] device addr */
-#define DEVICE_ADDR		0x0007
-
-/* OCP_EEE_DATA */
-#define EEE_ADDR		0x003C
-#define EEE_DATA		0x0002
 
 /* OCP_EEE_CFG */
 #define CTAP_SHORT_EN		0x0040
@@ -395,10 +396,6 @@
 /* OCP_DOWN_SPEED */
 #define EN_10M_BGOFF		0x0080
 
-/* OCP_EEE_CFG2 */
-#define MY1000_EEE		0x0004
-#define MY100_EEE		0x0002
-
 /* OCP_ADC_CFG */
 #define CKADSEL_L		0x0100
 #define ADC_EN			0x0080
@@ -577,6 +574,8 @@ struct r8152 {
 		void (*up)(struct r8152 *);
 		void (*down)(struct r8152 *);
 		void (*unload)(struct r8152 *);
+		int (*eee_get)(struct r8152 *, struct ethtool_eee *);
+		int (*eee_set)(struct r8152 *, struct ethtool_eee *);
 	} rtl_ops;
 
 	int intr_interval;
@@ -2957,43 +2956,92 @@ static int rtl8152_close(struct net_device *netdev)
 	return res;
 }
 
-static void r8152b_enable_eee(struct r8152 *tp)
+static inline void r8152_mmd_indirect(struct r8152 *tp, u16 dev, u16 reg)
+{
+	ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | dev);
+	ocp_reg_write(tp, OCP_EEE_DATA, reg);
+	ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | dev);
+}
+
+static u16 r8152_mmd_read(struct r8152 *tp, u16 dev, u16 reg)
+{
+	u16 data;
+
+	r8152_mmd_indirect(tp, dev, reg);
+	data = ocp_reg_read(tp, OCP_EEE_DATA);
+	ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
+
+	return data;
+}
+
+static void r8152_mmd_write(struct r8152 *tp, u16 dev, u16 reg, u16 data)
 {
+	r8152_mmd_indirect(tp, dev, reg);
+	ocp_reg_write(tp, OCP_EEE_DATA, data);
+	ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
+}
+
+static void r8152_eee_en(struct r8152 *tp, bool enable)
+{
+	u16 config1, config2, config3;
 	u32 ocp_data;
 
 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
-	ocp_data |= EEE_RX_EN | EEE_TX_EN;
+	config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask;
+	config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2);
+	config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask;
+
+	if (enable) {
+		ocp_data |= EEE_RX_EN | EEE_TX_EN;
+		config1 |= EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | RX_QUIET_EN;
+		config1 |= sd_rise_time(1);
+		config2 |= RG_DACQUIET_EN | RG_LDVQUIET_EN;
+		config3 |= fast_snr(42);
+	} else {
+		ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
+		config1 &= ~(EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN |
+			     RX_QUIET_EN);
+		config1 |= sd_rise_time(7);
+		config2 &= ~(RG_DACQUIET_EN | RG_LDVQUIET_EN);
+		config3 |= fast_snr(511);
+	}
+
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
-	ocp_reg_write(tp, OCP_EEE_CONFIG1, RG_TXLPI_MSK_HFDUP | RG_MATCLR_EN |
-					   EEE_10_CAP | EEE_NWAY_EN |
-					   TX_QUIET_EN | RX_QUIET_EN |
-					   SDRISETIME | RG_RXLPI_MSK_HFDUP |
-					   SDFALLTIME);
-	ocp_reg_write(tp, OCP_EEE_CONFIG2, RG_LPIHYS_NUM | RG_DACQUIET_EN |
-					   RG_LDVQUIET_EN | RG_CKRSEL |
-					   RG_EEEPRG_EN);
-	ocp_reg_write(tp, OCP_EEE_CONFIG3, FST_SNR_EYE_R | RG_LFS_SEL | MSK_PH);
-	ocp_reg_write(tp, OCP_EEE_AR, FUN_ADDR | DEVICE_ADDR);
-	ocp_reg_write(tp, OCP_EEE_DATA, EEE_ADDR);
-	ocp_reg_write(tp, OCP_EEE_AR, FUN_DATA | DEVICE_ADDR);
-	ocp_reg_write(tp, OCP_EEE_DATA, EEE_DATA);
-	ocp_reg_write(tp, OCP_EEE_AR, 0x0000);
+	ocp_reg_write(tp, OCP_EEE_CONFIG1, config1);
+	ocp_reg_write(tp, OCP_EEE_CONFIG2, config2);
+	ocp_reg_write(tp, OCP_EEE_CONFIG3, config3);
 }
 
-static void r8153_enable_eee(struct r8152 *tp)
+static void r8152b_enable_eee(struct r8152 *tp)
+{
+	r8152_eee_en(tp, true);
+	r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, MDIO_EEE_100TX);
+}
+
+static void r8153_eee_en(struct r8152 *tp, bool enable)
 {
 	u32 ocp_data;
-	u16 data;
+	u16 config;
 
 	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
-	ocp_data |= EEE_RX_EN | EEE_TX_EN;
+	config = ocp_reg_read(tp, OCP_EEE_CFG);
+
+	if (enable) {
+		ocp_data |= EEE_RX_EN | EEE_TX_EN;
+		config |= EEE10_EN;
+	} else {
+		ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
+		config &= ~EEE10_EN;
+	}
+
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
-	data = ocp_reg_read(tp, OCP_EEE_CFG);
-	data |= EEE10_EN;
-	ocp_reg_write(tp, OCP_EEE_CFG, data);
-	data = ocp_reg_read(tp, OCP_EEE_CFG2);
-	data |= MY1000_EEE | MY100_EEE;
-	ocp_reg_write(tp, OCP_EEE_CFG2, data);
+	ocp_reg_write(tp, OCP_EEE_CFG, config);
+}
+
+static void r8153_enable_eee(struct r8152 *tp)
+{
+	r8153_eee_en(tp, true);
+	ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX);
 }
 
 static void r8152b_enable_fc(struct r8152 *tp)
@@ -3322,6 +3370,122 @@ static void rtl8152_get_strings(struct net_device *dev, u32 stringset, u8 *data)
 	}
 }
 
+static int r8152_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+	u32 ocp_data, lp, adv, supported = 0;
+	u16 val;
+
+	val = r8152_mmd_read(tp, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
+	supported = mmd_eee_cap_to_ethtool_sup_t(val);
+
+	val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
+	adv = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
+	lp = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+	ocp_data &= EEE_RX_EN | EEE_TX_EN;
+
+	eee->eee_enabled = !!ocp_data;
+	eee->eee_active = !!(supported & adv & lp);
+	eee->supported = supported;
+	eee->advertised = adv;
+	eee->lp_advertised = lp;
+
+	return 0;
+}
+
+static int r8152_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+	u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
+
+	r8152_eee_en(tp, eee->eee_enabled);
+
+	if (!eee->eee_enabled)
+		val = 0;
+
+	r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
+
+	return 0;
+}
+
+static int r8153_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+	u32 ocp_data, lp, adv, supported = 0;
+	u16 val;
+
+	val = ocp_reg_read(tp, OCP_EEE_ABLE);
+	supported = mmd_eee_cap_to_ethtool_sup_t(val);
+
+	val = ocp_reg_read(tp, OCP_EEE_ADV);
+	adv = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	val = ocp_reg_read(tp, OCP_EEE_LPABLE);
+	lp = mmd_eee_adv_to_ethtool_adv_t(val);
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
+	ocp_data &= EEE_RX_EN | EEE_TX_EN;
+
+	eee->eee_enabled = !!ocp_data;
+	eee->eee_active = !!(supported & adv & lp);
+	eee->supported = supported;
+	eee->advertised = adv;
+	eee->lp_advertised = lp;
+
+	return 0;
+}
+
+static int r8153_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+	u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
+
+	r8153_eee_en(tp, eee->eee_enabled);
+
+	if (!eee->eee_enabled)
+		val = 0;
+
+	ocp_reg_write(tp, OCP_EEE_ADV, val);
+
+	return 0;
+}
+
+static int
+rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+	struct r8152 *tp = netdev_priv(net);
+	int ret;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out;
+
+	ret = tp->rtl_ops.eee_get(tp, edata);
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return ret;
+}
+
+static int
+rtl_ethtool_set_eee(struct net_device *net, struct ethtool_eee *edata)
+{
+	struct r8152 *tp = netdev_priv(net);
+	int ret;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		goto out;
+
+	ret = tp->rtl_ops.eee_set(tp, edata);
+
+	usb_autopm_put_interface(tp->intf);
+
+out:
+	return ret;
+}
+
 static struct ethtool_ops ops = {
 	.get_drvinfo = rtl8152_get_drvinfo,
 	.get_settings = rtl8152_get_settings,
@@ -3334,6 +3498,8 @@ static struct ethtool_ops ops = {
 	.get_strings = rtl8152_get_strings,
 	.get_sset_count = rtl8152_get_sset_count,
 	.get_ethtool_stats = rtl8152_get_ethtool_stats,
+	.get_eee = rtl_ethtool_get_eee,
+	.set_eee = rtl_ethtool_set_eee,
 };
 
 static int rtl8152_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
@@ -3475,6 +3641,8 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
 			ops->up			= rtl8152_up;
 			ops->down		= rtl8152_down;
 			ops->unload		= rtl8152_unload;
+			ops->eee_get		= r8152_get_eee;
+			ops->eee_set		= r8152_set_eee;
 			ret = 0;
 			break;
 		case PRODUCT_ID_RTL8153:
@@ -3484,6 +3652,8 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
 			ops->up			= rtl8153_up;
 			ops->down		= rtl8153_down;
 			ops->unload		= rtl8153_unload;
+			ops->eee_get		= r8153_get_eee;
+			ops->eee_set		= r8153_set_eee;
 			ret = 0;
 			break;
 		default:
@@ -3500,6 +3670,8 @@ static int rtl_ops_init(struct r8152 *tp, const struct usb_device_id *id)
 			ops->up			= rtl8153_up;
 			ops->down		= rtl8153_down;
 			ops->unload		= rtl8153_unload;
+			ops->eee_get		= r8153_get_eee;
+			ops->eee_set		= r8153_set_eee;
 			ret = 0;
 			break;
 		default: