Merge branch 'next' of git://git.secretlab.ca/git/linux-2.6

* 'next' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
  powerpc: fix up for mmu_mapin_ram api change
  powerpc: wii: allow ioremap within the memory hole
  powerpc: allow ioremap within reserved memory regions
  wii: use both mem1 and mem2 as ram
  wii: bootwrapper: add fixup to calc useable mem2
  powerpc: gamecube/wii: early debugging using usbgecko
  powerpc: reserve fixmap entries for early debug
  powerpc: wii: default config
  powerpc: wii: platform support
  powerpc: wii: hollywood interrupt controller support
  powerpc: broadway processor support
  powerpc: wii: bootwrapper bits
  powerpc: wii: device tree
  powerpc: gamecube: default config
  powerpc: gamecube: platform support
  powerpc: gamecube/wii: flipper interrupt controller support
  powerpc: gamecube/wii: udbg support for usbgecko
  powerpc: gamecube/wii: do not include PCI support
  powerpc: gamecube/wii: declare as non-coherent platforms
  powerpc: gamecube/wii: introduce GAMECUBE_COMMON
  ...

Fix up conflicts in arch/powerpc/mm/fsl_booke_mmu.c.

Hopefully even close to correctly.

Documentation/powerpc/dts-bindings/nintendo/gamecube.txt

+
+Nintendo GameCube device tree
+=============================
+
+1) The "flipper" node
+
+  This node represents the multi-function "Flipper" chip, which packages
+  many of the devices found in the Nintendo GameCube.
+
+  Required properties:
+
+   - compatible : Should be "nintendo,flipper"
+
+1.a) The Video Interface (VI) node
+
+  Represents the interface between the graphics processor and a external
+  video encoder.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-vi"
+   - reg : should contain the VI registers location and length
+   - interrupts : should contain the VI interrupt
+
+1.b) The Processor Interface (PI) node
+
+  Represents the data and control interface between the main processor
+  and graphics and audio processor.
+
+  Required properties:
+
+  - compatible : should be "nintendo,flipper-pi"
+  - reg : should contain the PI registers location and length
+
+1.b.i) The "Flipper" interrupt controller node
+
+  Represents the interrupt controller within the "Flipper" chip.
+  The node for the "Flipper" interrupt controller must be placed under
+  the PI node.
+
+  Required properties:
+
+  - compatible : should be "nintendo,flipper-pic"
+
+1.c) The Digital Signal Procesor (DSP) node
+
+  Represents the digital signal processor interface, designed to offload
+  audio related tasks.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-dsp"
+   - reg : should contain the DSP registers location and length
+   - interrupts : should contain the DSP interrupt
+
+1.c.i) The Auxiliary RAM (ARAM) node
+
+  Represents the non cpu-addressable ram designed mainly to store audio
+  related information.
+  The ARAM node must be placed under the DSP node.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-aram"
+   - reg : should contain the ARAM start (zero-based) and length
+
+1.d) The Disk Interface (DI) node
+
+  Represents the interface used to communicate with mass storage devices.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-di"
+   - reg : should contain the DI registers location and length
+   - interrupts : should contain the DI interrupt
+
+1.e) The Audio Interface (AI) node
+
+  Represents the interface to the external 16-bit stereo digital-to-analog
+  converter.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-ai"
+   - reg : should contain the AI registers location and length
+   - interrupts : should contain the AI interrupt
+
+1.f) The Serial Interface (SI) node
+
+  Represents the interface to the four single bit serial interfaces.
+  The SI is a proprietary serial interface used normally to control gamepads.
+  It's NOT a RS232-type interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-si"
+   - reg : should contain the SI registers location and length
+   - interrupts : should contain the SI interrupt
+
+1.g) The External Interface (EXI) node
+
+  Represents the multi-channel SPI-like interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,flipper-exi"
+   - reg : should contain the EXI registers location and length
+   - interrupts : should contain the EXI interrupt
+

Documentation/powerpc/dts-bindings/nintendo/wii.txt

+
+Nintendo Wii device tree
+========================
+
+0) The root node
+
+  This node represents the Nintendo Wii video game console.
+
+  Required properties:
+
+   - model : Should be "nintendo,wii"
+   - compatible : Should be "nintendo,wii"
+
+1) The "hollywood" node
+
+  This node represents the multi-function "Hollywood" chip, which packages
+  many of the devices found in the Nintendo Wii.
+
+  Required properties:
+
+   - compatible : Should be "nintendo,hollywood"
+
+1.a) The Video Interface (VI) node
+
+  Represents the interface between the graphics processor and a external
+  video encoder.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-vi","nintendo,flipper-vi"
+   - reg : should contain the VI registers location and length
+   - interrupts : should contain the VI interrupt
+
+1.b) The Processor Interface (PI) node
+
+  Represents the data and control interface between the main processor
+  and graphics and audio processor.
+
+  Required properties:
+
+  - compatible : should be "nintendo,hollywood-pi","nintendo,flipper-pi"
+  - reg : should contain the PI registers location and length
+
+1.b.i) The "Flipper" interrupt controller node
+
+  Represents the "Flipper" interrupt controller within the "Hollywood" chip.
+  The node for the "Flipper" interrupt controller must be placed under
+  the PI node.
+
+  Required properties:
+
+  - #interrupt-cells : <1>
+  - compatible : should be "nintendo,flipper-pic"
+  - interrupt-controller
+
+1.c) The Digital Signal Procesor (DSP) node
+
+  Represents the digital signal processor interface, designed to offload
+  audio related tasks.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-dsp","nintendo,flipper-dsp"
+   - reg : should contain the DSP registers location and length
+   - interrupts : should contain the DSP interrupt
+
+1.d) The Serial Interface (SI) node
+
+  Represents the interface to the four single bit serial interfaces.
+  The SI is a proprietary serial interface used normally to control gamepads.
+  It's NOT a RS232-type interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-si","nintendo,flipper-si"
+   - reg : should contain the SI registers location and length
+   - interrupts : should contain the SI interrupt
+
+1.e) The Audio Interface (AI) node
+
+  Represents the interface to the external 16-bit stereo digital-to-analog
+  converter.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-ai","nintendo,flipper-ai"
+   - reg : should contain the AI registers location and length
+   - interrupts : should contain the AI interrupt
+
+1.f) The External Interface (EXI) node
+
+  Represents the multi-channel SPI-like interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-exi","nintendo,flipper-exi"
+   - reg : should contain the EXI registers location and length
+   - interrupts : should contain the EXI interrupt
+
+1.g) The Open Host Controller Interface (OHCI) nodes
+
+  Represent the USB 1.x Open Host Controller Interfaces.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-usb-ohci","usb-ohci"
+   - reg : should contain the OHCI registers location and length
+   - interrupts : should contain the OHCI interrupt
+
+1.h) The Enhanced Host Controller Interface (EHCI) node
+
+  Represents the USB 2.0 Enhanced Host Controller Interface.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-usb-ehci","usb-ehci"
+   - reg : should contain the EHCI registers location and length
+   - interrupts : should contain the EHCI interrupt
+
+1.i) The Secure Digital Host Controller Interface (SDHCI) nodes
+
+  Represent the Secure Digital Host Controller Interfaces.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-sdhci","sdhci"
+   - reg : should contain the SDHCI registers location and length
+   - interrupts : should contain the SDHCI interrupt
+
+1.j) The Inter-Processsor Communication (IPC) node
+
+  Represent the Inter-Processor Communication interface. This interface
+  enables communications between the Broadway and the Starlet processors.
+
+   - compatible : should be "nintendo,hollywood-ipc"
+   - reg : should contain the IPC registers location and length
+   - interrupts : should contain the IPC interrupt
+
+1.k) The "Hollywood" interrupt controller node
+
+  Represents the "Hollywood" interrupt controller within the
+  "Hollywood" chip.
+
+  Required properties:
+
+  - #interrupt-cells : <1>
+  - compatible : should be "nintendo,hollywood-pic"
+  - reg : should contain the controller registers location and length
+  - interrupt-controller
+  - interrupts : should contain the cascade interrupt of the "flipper" pic
+  - interrupt-parent: should contain the phandle of the "flipper" pic
+
+1.l) The General Purpose I/O (GPIO) controller node
+
+  Represents the dual access 32 GPIO controller interface.
+
+  Required properties:
+
+  - #gpio-cells : <2>
+  - compatible : should be "nintendo,hollywood-gpio"
+  - reg : should contain the IPC registers location and length
+  - gpio-controller
+
+1.m) The control node
+
+  Represents the control interface used to setup several miscellaneous
+  settings of the "Hollywood" chip like boot memory mappings, resets,
+  disk interface mode, etc.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-control"
+   - reg : should contain the control registers location and length
+
+1.n) The Disk Interface (DI) node
+
+  Represents the interface used to communicate with mass storage devices.
+
+  Required properties:
+
+   - compatible : should be "nintendo,hollywood-di"
+   - reg : should contain the DI registers location and length
+   - interrupts : should contain the DI interrupt
+

arch/powerpc/Kconfig

@@ -704,7 +704,7 @@ config PPC_PCI_CHOICE
 config PCI
 	bool "PCI support" if PPC_PCI_CHOICE
 	default y if !40x && !CPM2 && !8xx && !PPC_83xx \
-		&& !PPC_85xx && !PPC_86xx
+		&& !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
 	select ARCH_SUPPORTS_MSI

arch/powerpc/Kconfig.debug

@@ -254,6 +254,14 @@ config PPC_EARLY_DEBUG_CPM
 	  using a CPM-based serial port.  This assumes that the bootwrapper
 	  has run, and set up the CPM in a particular way.
 
+config PPC_EARLY_DEBUG_USBGECKO
+	bool "Early debugging through the USB Gecko adapter"
+	depends on GAMECUBE_COMMON
+	select USBGECKO_UDBG
+	help
+	  Select this to enable early debugging for Nintendo GameCube/Wii
+	  consoles via an external USB Gecko adapter.
+
 endchoice
 
 config PPC_EARLY_DEBUG_44x_PHYSLOW

arch/powerpc/boot/Makefile

@@ -66,7 +66,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
 		4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
 		cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
-		fsl-soc.c mpc8xx.c pq2.c
+		fsl-soc.c mpc8xx.c pq2.c ugecon.c
 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
 		cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
@@ -76,7 +76,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
-		cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c
+		cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
+		gamecube-head.S gamecube.c wii-head.S wii.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -254,6 +255,8 @@ image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
 image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2
 image-$(CONFIG_PPC_C2K)			+= cuImage.c2k
+image-$(CONFIG_GAMECUBE)		+= dtbImage.gamecube
+image-$(CONFIG_WII)			+= dtbImage.wii
 
 # Board port in arch/powerpc/platform/amigaone/Kconfig
 image-$(CONFIG_AMIGAONE)		+= cuImage.amigaone

arch/powerpc/boot/dts/gamecube.dts

+/*
+ * arch/powerpc/boot/dts/gamecube.dts
+ *
+ * Nintendo GameCube platform device tree source
+ * Copyright (C) 2007-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	model = "nintendo,gamecube";
+	compatible = "nintendo,gamecube";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "root=/dev/gcnsda2 rootwait udbg-immortal";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x01800000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,gekko@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <486000000>; /* 486MHz */
+			bus-frequency = <162000000>; /* 162MHz core-to-bus 3x */
+			timebase-frequency = <40500000>; /* 162MHz / 4 */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	/* devices contained int the flipper chipset */
+	flipper {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "nintendo,flipper";
+		ranges = <0x0c000000 0x0c000000 0x00010000>;
+		interrupt-parent = <&PIC>;
+
+		video@0c002000 {
+			compatible = "nintendo,flipper-vi";
+			reg = <0x0c002000 0x100>;
+			interrupts = <8>;
+		};
+
+		processor-interface@0c003000 {
+			compatible = "nintendo,flipper-pi";
+			reg = <0x0c003000 0x100>;
+
+			PIC: pic {
+				#interrupt-cells = <1>;
+				compatible = "nintendo,flipper-pic";
+				interrupt-controller;
+			};
+		};
+
+		dsp@0c005000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "nintendo,flipper-dsp";
+			reg = <0x0c005000 0x200>;
+			interrupts = <6>;
+
+			memory@0 {
+				compatible = "nintendo,flipper-aram";
+				reg = <0 0x1000000>;	/* 16MB */
+			};
+		};
+
+		disk@0c006000 {
+			compatible = "nintendo,flipper-di";
+			reg = <0x0c006000 0x40>;
+			interrupts = <2>;
+		};
+
+		audio@0c006c00 {
+			compatible = "nintendo,flipper-ai";
+			reg = <0x0c006c00 0x20>;
+			interrupts = <6>;
+		};
+
+		gamepad-controller@0c006400 {
+			compatible = "nintendo,flipper-si";
+			reg = <0x0c006400 0x100>;
+			interrupts = <3>;
+		};
+
+		/* External Interface bus */
+		exi@0c006800 {
+			compatible = "nintendo,flipper-exi";
+			reg = <0x0c006800 0x40>;
+			virtual-reg = <0x0c006800>;
+			interrupts = <4>;
+		};
+        };
+};
+

arch/powerpc/boot/dts/wii.dts

+/*
+ * arch/powerpc/boot/dts/wii.dts
+ *
+ * Nintendo Wii platform device tree source
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+/dts-v1/;
+
+/*
+ * This is commented-out for now.
+ * Until a later patch is merged, the kernel can use only the first
+ * contiguous RAM range and will BUG() if the memreserve is outside
+ * that range.
+ */
+/*/memreserve/ 0x10000000 0x0004000;*/	/* DSP RAM */
+
+/ {
+	model = "nintendo,wii";
+	compatible = "nintendo,wii";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rootwait udbg-immortal";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x01800000	/* MEM1 24MB 1T-SRAM */
+		       0x10000000 0x04000000>;	/* MEM2 64MB GDDR3 */
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,broadway@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <729000000>; /* 729MHz */
+			bus-frequency = <243000000>; /* 243MHz core-to-bus 3x */
+			timebase-frequency = <60750000>; /* 243MHz / 4 */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	/* devices contained in the hollywood chipset */
+	hollywood {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "nintendo,hollywood";
+                ranges = <0x0c000000 0x0c000000 0x01000000
+			  0x0d000000 0x0d000000 0x00800000
+			  0x0d800000 0x0d800000 0x00800000>;
+		interrupt-parent = <&PIC0>;
+
+		video@0c002000 {
+			compatible = "nintendo,hollywood-vi",
+					"nintendo,flipper-vi";
+			reg = <0x0c002000 0x100>;
+			interrupts = <8>;
+		};
+
+		processor-interface@0c003000 {
+			compatible = "nintendo,hollywood-pi",
+					"nintendo,flipper-pi";
+			reg = <0x0c003000 0x100>;
+
+			PIC0: pic0 {
+				#interrupt-cells = <1>;
+				compatible = "nintendo,flipper-pic";
+				interrupt-controller;
+			};
+		};
+
+		dsp@0c005000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "nintendo,hollywood-dsp",
+					"nintendo,flipper-dsp";
+			reg = <0x0c005000 0x200>;
+			interrupts = <6>;
+		};
+
+		gamepad-controller@0d006400 {
+			compatible = "nintendo,hollywood-si",
+					"nintendo,flipper-si";
+			reg = <0x0d006400 0x100>;
+			interrupts = <3>;
+		};
+
+		audio@0c006c00 {
+			compatible = "nintendo,hollywood-ai",
+					"nintendo,flipper-ai";
+			reg = <0x0d006c00 0x20>;
+			interrupts = <6>;
+		};
+
+		/* External Interface bus */
+		exi@0d006800 {
+			compatible = "nintendo,hollywood-exi",
+					"nintendo,flipper-exi";
+			reg = <0x0d006800 0x40>;
+			virtual-reg = <0x0d006800>;
+			interrupts = <4>;
+		};
+
+		usb@0d040000 {
+			compatible = "nintendo,hollywood-usb-ehci",
+					"usb-ehci";
+			reg = <0x0d040000 0x100>;
+			interrupts = <4>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		usb@0d050000 {
+			compatible = "nintendo,hollywood-usb-ohci",
+					"usb-ohci";
+			reg = <0x0d050000 0x100>;
+			interrupts = <5>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		usb@0d060000 {
+			compatible = "nintendo,hollywood-usb-ohci",
+					"usb-ohci";
+			reg = <0x0d060000 0x100>;
+			interrupts = <6>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		sd@0d070000 {
+			compatible = "nintendo,hollywood-sdhci",
+					"sdhci";
+			reg = <0x0d070000 0x200>;
+			interrupts = <7>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		sdio@0d080000 {
+			compatible = "nintendo,hollywood-sdhci",
+					"sdhci";
+			reg = <0x0d080000 0x200>;
+			interrupts = <8>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		ipc@0d000000 {
+			compatible = "nintendo,hollywood-ipc";
+			reg = <0x0d000000 0x10>;
+			interrupts = <30>;
+			interrupt-parent = <&PIC1>;
+		};
+
+		PIC1: pic1@0d800030 {
+			#interrupt-cells = <1>;
+			compatible = "nintendo,hollywood-pic";
+			reg = <0x0d800030 0x10>;
+			interrupt-controller;
+			interrupts = <14>;
+		};
+
+		GPIO: gpio@0d8000c0 {
+			#gpio-cells = <2>;
+			compatible = "nintendo,hollywood-gpio";
+			reg = <0x0d8000c0 0x40>;
+			gpio-controller;
+
+			/*
+			 * This is commented out while a standard binding
+			 * for i2c over gpio is defined.
+			 */
+			/*
+			i2c-video {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			        compatible = "i2c-gpio";
+
+			        gpios = <&GPIO 15 0
+			                 &GPIO 14 0>;
+			        clock-frequency = <250000>;
+				no-clock-stretching;
+			        scl-is-open-drain;
+			        sda-is-open-drain;
+			        sda-enforce-dir;
+
+			        AVE: audio-video-encoder@70 {
+			                compatible = "nintendo,wii-audio-video-encoder";
+			                reg = <0x70>;
+			        };
+			};
+			*/
+		};
+
+		control@0d800100 {
+			compatible = "nintendo,hollywood-control";
+			reg = <0x0d800100 0x300>;
+		};
+
+		disk@0d806000 {
+			compatible = "nintendo,hollywood-di";
+			reg = <0x0d806000 0x40>;
+			interrupts = <2>;
+		};
+	};
+};
+

arch/powerpc/boot/gamecube-head.S

+/*
+ * arch/powerpc/boot/gamecube-head.S
+ *
+ * Nintendo GameCube bootwrapper entry.
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include "ppc_asm.h"
+
+/*
+ * The entry code does no assumptions regarding:
+ * - if the data and instruction caches are enabled or not
+ * - if the MMU is enabled or not
+ *
+ * We enable the caches if not already enabled, enable the MMU with an
+ * identity mapping scheme and jump to the start code.
+ */
+
+	.text
+
+	.globl _zimage_start
+_zimage_start:
+
+	/* turn the MMU off */
+	mfmsr	9
+	rlwinm	9, 9, 0, ~((1<<4)|(1<<5)) /* MSR_DR|MSR_IR */
+	bcl	20, 31, 1f
+1:
+	mflr	8
+	clrlwi	8, 8, 3		/* convert to a real address */
+	addi	8, 8, _mmu_off - 1b
+	mtsrr0	8
+	mtsrr1	9
+	rfi
+_mmu_off:
+	/* MMU disabled */
+
+	/* setup BATs */
+	isync
+	li      8, 0
+	mtspr	0x210, 8	/* IBAT0U */
+	mtspr	0x212, 8	/* IBAT1U */
+	mtspr	0x214, 8	/* IBAT2U */
+	mtspr	0x216, 8	/* IBAT3U */
+	mtspr	0x218, 8	/* DBAT0U */
+	mtspr	0x21a, 8	/* DBAT1U */
+	mtspr	0x21c, 8	/* DBAT2U */
+	mtspr	0x21e, 8	/* DBAT3U */
+
+	li	8, 0x01ff	/* first 16MiB */
+	li	9, 0x0002	/* rw */
+	mtspr	0x211, 9	/* IBAT0L */
+	mtspr	0x210, 8	/* IBAT0U */
+	mtspr	0x219, 9	/* DBAT0L */
+	mtspr	0x218, 8	/* DBAT0U */
+
+	lis	8, 0x0c00	/* I/O mem */
+	ori	8, 8, 0x3ff	/* 32MiB */
+	lis	9, 0x0c00
+	ori	9, 9, 0x002a	/* uncached, guarded, rw */
+	mtspr	0x21b, 9	/* DBAT1L */
+	mtspr	0x21a, 8	/* DBAT1U */
+
+	lis	8, 0x0100	/* next 8MiB */
+	ori	8, 8, 0x00ff	/* 8MiB */
+	lis	9, 0x0100
+	ori	9, 9, 0x0002	/* rw */
+	mtspr	0x215, 9	/* IBAT2L */
+	mtspr	0x214, 8	/* IBAT2U */
+	mtspr	0x21d, 9	/* DBAT2L */
+	mtspr	0x21c, 8	/* DBAT2U */
+
+	/* enable and invalidate the caches if not already enabled */
+	mfspr	8, 0x3f0	/* HID0 */
+	andi.	0, 8, (1<<15)		/* HID0_ICE */
+	bne	1f
+	ori	8, 8, (1<<15)|(1<<11)	/* HID0_ICE|HID0_ICFI*/
+1:
+	andi.	0, 8, (1<<14)		/* HID0_DCE */
+	bne	1f
+	ori	8, 8, (1<<14)|(1<<10)	/* HID0_DCE|HID0_DCFI*/
+1:
+	mtspr	0x3f0, 8	/* HID0 */
+	isync
+
+	/* initialize arguments */
+	li	3, 0
+	li	4, 0
+	li	5, 0
+
+	/* turn the MMU on */
+	bcl	20, 31, 1f
+1:
+	mflr	8
+	addi	8, 8, _mmu_on - 1b
+	mfmsr	9
+	ori	9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */
+	mtsrr0	8
+	mtsrr1	9
+	sync
+	rfi
+_mmu_on:
+	b _zimage_start_lib
+

arch/powerpc/boot/gamecube.c

+/*
+ * arch/powerpc/boot/gamecube.c
+ *
+ * Nintendo GameCube bootwrapper support
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <stddef.h>
+#include "stdio.h"
+#include "types.h"
+#include "io.h"
+#include "ops.h"
+
+#include "ugecon.h"
+
+BSS_STACK(8192);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
+{
+	u32 heapsize = 16*1024*1024 - (u32)_end;
+
+	simple_alloc_init(_end, heapsize, 32, 64);
+	fdt_init(_dtb_start);
+
+	if (ug_probe())
+		console_ops.write = ug_console_write;
+}
+

arch/powerpc/boot/ugecon.c

+/*
+ * arch/powerpc/boot/ugecon.c
+ *
+ * USB Gecko bootwrapper console.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <stddef.h>
+#include "stdio.h"
+#include "types.h"
+#include "io.h"
+#include "ops.h"
+
+
+#define EXI_CLK_32MHZ           5
+
+#define EXI_CSR                 0x00
+#define   EXI_CSR_CLKMASK       (0x7<<4)
+#define     EXI_CSR_CLK_32MHZ   (EXI_CLK_32MHZ<<4)
+#define   EXI_CSR_CSMASK        (0x7<<7)
+#define     EXI_CSR_CS_0        (0x1<<7)  /* Chip Select 001 */
+
+#define EXI_CR                  0x0c
+#define   EXI_CR_TSTART         (1<<0)
+#define   EXI_CR_WRITE		(1<<2)
+#define   EXI_CR_READ_WRITE     (2<<2)
+#define   EXI_CR_TLEN(len)      (((len)-1)<<4)
+
+#define EXI_DATA                0x10
+
+
+/* virtual address base for input/output, retrieved from device tree */
+static void *ug_io_base;
+
+
+static u32 ug_io_transaction(u32 in)
+{
+	u32 *csr_reg = ug_io_base + EXI_CSR;
+	u32 *data_reg = ug_io_base + EXI_DATA;
+	u32 *cr_reg = ug_io_base + EXI_CR;
+	u32 csr, data, cr;
+
+	/* select */
+	csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0;
+	out_be32(csr_reg, csr);
+
+	/* read/write */
+	data = in;
+	out_be32(data_reg, data);
+	cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART;
+	out_be32(cr_reg, cr);
+
+	while (in_be32(cr_reg) & EXI_CR_TSTART)
+		barrier();
+
+	/* deselect */
+	out_be32(csr_reg, 0);
+
+	data = in_be32(data_reg);
+	return data;
+}
+
+static int ug_is_txfifo_ready(void)
+{
+	return ug_io_transaction(0xc0000000) & 0x04000000;
+}
+
+static void ug_raw_putc(char ch)
+{
+	ug_io_transaction(0xb0000000 | (ch << 20));
+}
+
+static void ug_putc(char ch)
+{
+	int count = 16;
+
+	if (!ug_io_base)
+		return;
+
+	while (!ug_is_txfifo_ready() && count--)
+		barrier();
+	if (count)
+		ug_raw_putc(ch);
+}
+
+void ug_console_write(const char *buf, int len)
+{
+	char *b = (char *)buf;
+
+	while (len--) {
+		if (*b == '\n')
+			ug_putc('\r');
+		ug_putc(*b++);
+	}
+}
+
+static int ug_is_adapter_present(void)
+{
+	if (!ug_io_base)
+		return 0;
+	return ug_io_transaction(0x90000000) == 0x04700000;
+}
+
+static void *ug_grab_exi_io_base(void)
+{
+	u32 v;
+	void *devp;
+
+	devp = find_node_by_compatible(NULL, "nintendo,flipper-exi");
+	if (devp == NULL)
+		goto err_out;
+	if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
+		goto err_out;
+
+	return (void *)v;
+
+err_out:
+	return NULL;
+}
+
+void *ug_probe(void)
+{
+	void *exi_io_base;
+	int i;
+
+	exi_io_base = ug_grab_exi_io_base();
+	if (!exi_io_base)
+		return NULL;
+
+	/* look for a usbgecko on memcard slots A and B */
+	for (i = 0; i < 2; i++) {
+		ug_io_base = exi_io_base + 0x14 * i;
+		if (ug_is_adapter_present())
+			break;
+	}
+	if (i == 2)
+		ug_io_base = NULL;
+	return ug_io_base;
+}
+

arch/powerpc/boot/ugecon.h

+/*
+ * arch/powerpc/boot/ugecon.h
+ *
+ * USB Gecko early bootwrapper console.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __UGECON_H
+#define __UGECON_H
+
+extern void *ug_probe(void);
+
+extern void ug_putc(char ch);
+extern void ug_console_write(const char *buf, int len);
+
+#endif /* __UGECON_H */
+

arch/powerpc/boot/wii-head.S

+/*
+ * arch/powerpc/boot/wii-head.S
+ *
+ * Nintendo Wii bootwrapper entry.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include "ppc_asm.h"
+
+/*
+ * The entry code does no assumptions regarding:
+ * - if the data and instruction caches are enabled or not
+ * - if the MMU is enabled or not
+ * - if the high BATs are enabled or not
+ *
+ * We enable the high BATs, enable the caches if not already enabled,
+ * enable the MMU with an identity mapping scheme and jump to the start code.
+ */
+
+	.text
+
+	.globl _zimage_start
+_zimage_start:
+
+	/* turn the MMU off */
+	mfmsr	9
+	rlwinm	9, 9, 0, ~((1<<4)|(1<<5)) /* MSR_DR|MSR_IR */
+	bcl	20, 31, 1f
+1:
+	mflr	8
+	clrlwi	8, 8, 3		/* convert to a real address */
+	addi	8, 8, _mmu_off - 1b
+	mtsrr0	8
+	mtsrr1	9
+	rfi
+_mmu_off:
+	/* MMU disabled */
+
+	/* setup BATs */
+	isync
+	li      8, 0
+	mtspr	0x210, 8	/* IBAT0U */
+	mtspr	0x212, 8	/* IBAT1U */
+	mtspr	0x214, 8	/* IBAT2U */
+	mtspr	0x216, 8	/* IBAT3U */
+	mtspr	0x218, 8	/* DBAT0U */
+	mtspr	0x21a, 8	/* DBAT1U */
+	mtspr	0x21c, 8	/* DBAT2U */
+	mtspr	0x21e, 8	/* DBAT3U */
+
+	mtspr	0x230, 8	/* IBAT4U */
+	mtspr	0x232, 8	/* IBAT5U */
+	mtspr	0x234, 8	/* IBAT6U */
+	mtspr	0x236, 8	/* IBAT7U */
+	mtspr	0x238, 8	/* DBAT4U */
+	mtspr	0x23a, 8	/* DBAT5U */
+	mtspr	0x23c, 8	/* DBAT6U */
+	mtspr	0x23e, 8	/* DBAT7U */
+
+	li	8, 0x01ff	/* first 16MiB */
+	li	9, 0x0002	/* rw */
+	mtspr	0x211, 9	/* IBAT0L */
+	mtspr	0x210, 8	/* IBAT0U */
+	mtspr	0x219, 9	/* DBAT0L */
+	mtspr	0x218, 8	/* DBAT0U */
+
+	lis	8, 0x0c00	/* I/O mem */
+	ori	8, 8, 0x3ff	/* 32MiB */
+	lis	9, 0x0c00
+	ori	9, 9, 0x002a	/* uncached, guarded, rw */
+	mtspr	0x21b, 9	/* DBAT1L */
+	mtspr	0x21a, 8	/* DBAT1U */
+
+	lis	8, 0x0100	/* next 8MiB */
+	ori	8, 8, 0x00ff	/* 8MiB */
+	lis	9, 0x0100
+	ori	9, 9, 0x0002	/* rw */
+	mtspr	0x215, 9	/* IBAT2L */
+	mtspr	0x214, 8	/* IBAT2U */
+	mtspr	0x21d, 9	/* DBAT2L */
+	mtspr	0x21c, 8	/* DBAT2U */
+
+	lis	8, 0x1000	/* MEM2 */
+	ori	8, 8, 0x07ff	/* 64MiB */
+	lis	9, 0x1000
+	ori	9, 9, 0x0002	/* rw */
+	mtspr	0x216, 8	/* IBAT3U */
+	mtspr	0x217, 9	/* IBAT3L */
+	mtspr	0x21e, 8	/* DBAT3U */
+	mtspr	0x21f, 9	/* DBAT3L */
+
+	/* enable the high BATs */
+	mfspr	8, 0x3f3	/* HID4 */
+	oris	8, 8, 0x0200
+	mtspr	0x3f3, 8	/* HID4 */
+
+	/* enable and invalidate the caches if not already enabled */
+	mfspr	8, 0x3f0	/* HID0 */
+	andi.	0, 8, (1<<15)		/* HID0_ICE */
+	bne	1f
+	ori	8, 8, (1<<15)|(1<<11)	/* HID0_ICE|HID0_ICFI*/
+1:
+	andi.	0, 8, (1<<14)		/* HID0_DCE */
+	bne	1f
+	ori	8, 8, (1<<14)|(1<<10)	/* HID0_DCE|HID0_DCFI*/
+1:
+	mtspr	0x3f0, 8	/* HID0 */
+	isync
+
+	/* initialize arguments */
+	li	3, 0
+	li	4, 0
+	li	5, 0
+
+	/* turn the MMU on */
+	bcl	20, 31, 1f
+1:
+	mflr	8
+	addi	8, 8, _mmu_on - 1b
+	mfmsr	9
+	ori	9, 9, (1<<4)|(1<<5) /* MSR_DR|MSR_IR */
+	mtsrr0	8
+	mtsrr1	9
+	sync
+	rfi
+_mmu_on:
+	/* turn on the front blue led (aka: yay! we got here!) */
+	lis	8, 0x0d00
+	ori	8, 8, 0x00c0
+	lwz	9, 0(8)
+	ori	9, 9, 0x20
+	stw	9, 0(8)
+
+	b _zimage_start_lib
+

arch/powerpc/boot/wii.c

+/*
+ * arch/powerpc/boot/wii.c
+ *
+ * Nintendo Wii bootwrapper support
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <stddef.h>
+#include "stdio.h"
+#include "types.h"
+#include "io.h"
+#include "ops.h"
+
+#include "ugecon.h"
+
+BSS_STACK(8192);
+
+#define HW_REG(x)		((void *)(x))
+
+#define EXI_CTRL		HW_REG(0x0d800070)
+#define EXI_CTRL_ENABLE		(1<<0)
+
+#define MEM2_TOP		(0x10000000 + 64*1024*1024)
+#define FIRMWARE_DEFAULT_SIZE	(12*1024*1024)
+
+
+struct mipc_infohdr {
+	char magic[3];
+	u8 version;
+	u32 mem2_boundary;
+	u32 ipc_in;
+	size_t ipc_in_size;
+	u32 ipc_out;
+	size_t ipc_out_size;
+};
+
+static int mipc_check_address(u32 pa)
+{
+	/* only MEM2 addresses */
+	if (pa < 0x10000000 || pa > 0x14000000)
+		return -EINVAL;
+	return 0;
+}
+
+static struct mipc_infohdr *mipc_get_infohdr(void)
+{
+	struct mipc_infohdr **hdrp, *hdr;
+
+	/* 'mini' header pointer is the last word of MEM2 memory */
+	hdrp = (struct mipc_infohdr **)0x13fffffc;
+	if (mipc_check_address((u32)hdrp)) {
+		printf("mini: invalid hdrp %08X\n", (u32)hdrp);
+		hdr = NULL;
+		goto out;
+	}
+
+	hdr = *hdrp;
+	if (mipc_check_address((u32)hdr)) {
+		printf("mini: invalid hdr %08X\n", (u32)hdr);
+		hdr = NULL;
+		goto out;
+	}
+	if (memcmp(hdr->magic, "IPC", 3)) {
+		printf("mini: invalid magic\n");
+		hdr = NULL;
+		goto out;
+	}
+
+out:
+	return hdr;
+}
+
+static int mipc_get_mem2_boundary(u32 *mem2_boundary)
+{
+	struct mipc_infohdr *hdr;
+	int error;
+
+	hdr = mipc_get_infohdr();
+	if (!hdr) {
+		error = -1;
+		goto out;
+	}
+
+	if (mipc_check_address(hdr->mem2_boundary)) {
+		printf("mini: invalid mem2_boundary %08X\n",
+		       hdr->mem2_boundary);
+		error = -EINVAL;
+		goto out;
+	}
+	*mem2_boundary = hdr->mem2_boundary;
+	error = 0;
+out:
+	return error;
+
+}
+
+static void platform_fixups(void)
+{
+	void *mem;
+	u32 reg[4];
+	u32 mem2_boundary;
+	int len;
+	int error;
+
+	mem = finddevice("/memory");
+	if (!mem)
+		fatal("Can't find memory node\n");
+
+	/* two ranges of (address, size) words */
+	len = getprop(mem, "reg", reg, sizeof(reg));
+	if (len != sizeof(reg)) {
+		/* nothing to do */
+		goto out;
+	}
+
+	/* retrieve MEM2 boundary from 'mini' */
+	error = mipc_get_mem2_boundary(&mem2_boundary);
+	if (error) {
+		/* if that fails use a sane value */
+		mem2_boundary = MEM2_TOP - FIRMWARE_DEFAULT_SIZE;
+	}
+
+	if (mem2_boundary > reg[2] && mem2_boundary < reg[2] + reg[3]) {
+		reg[3] = mem2_boundary - reg[2];
+		printf("top of MEM2 @ %08X\n", reg[2] + reg[3]);
+		setprop(mem, "reg", reg, sizeof(reg));
+	}
+
+out:
+	return;
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
+{
+	u32 heapsize = 24*1024*1024 - (u32)_end;
+
+	simple_alloc_init(_end, heapsize, 32, 64);
+	fdt_init(_dtb_start);
+
+	/*
+	 * 'mini' boots the Broadway processor with EXI disabled.
+	 * We need it enabled before probing for the USB Gecko.
+	 */
+	out_be32(EXI_CTRL, in_be32(EXI_CTRL) | EXI_CTRL_ENABLE);
+
+	if (ug_probe())
+		console_ops.write = ug_console_write;
+
+	platform_ops.fixups = platform_fixups;
+}
+

arch/powerpc/boot/wrapper

@@ -230,6 +230,10 @@ xpedite52*)
     link_address='0x1400000'
     platformo=$object/cuboot-85xx.o
     ;;
+gamecube|wii)
+    link_address='0x600000'
+    platformo="$object/$platform-head.o $object/$platform.o"
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"

arch/powerpc/include/asm/fixmap.h

@@ -44,6 +44,9 @@
  */
 enum fixed_addresses {
 	FIX_HOLE,
+	/* reserve the top 128K for early debugging purposes */
+	FIX_EARLY_DEBUG_TOP = FIX_HOLE,
+	FIX_EARLY_DEBUG_BASE = FIX_EARLY_DEBUG_TOP+((128*1024)/PAGE_SIZE)-1,
 #ifdef CONFIG_HIGHMEM
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
 	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,

arch/powerpc/include/asm/udbg.h

@@ -51,6 +51,7 @@ extern void __init udbg_init_btext(void);
 extern void __init udbg_init_44x_as1(void);
 extern void __init udbg_init_40x_realmode(void);
 extern void __init udbg_init_cpm(void);
+extern void __init udbg_init_usbgecko(void);
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_UDBG_H */

arch/powerpc/kernel/cputable.c

@@ -697,9 +697,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "ppc750",
 	},
-	{	/* 750CL */
-		.pvr_mask		= 0xfffff0f0,
-		.pvr_value		= 0x00087010,
+	{	/* 750CL (and "Broadway") */
+		.pvr_mask		= 0xfffff0e0,
+		.pvr_value		= 0x00087000,
 		.cpu_name		= "750CL",
 		.cpu_features		= CPU_FTRS_750CL,
 		.cpu_user_features	= COMMON_USER | PPC_FEATURE_PPC_LE,

arch/powerpc/kernel/head_32.S

@@ -164,6 +164,9 @@ __after_mmu_off:
 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
 	bl	setup_cpm_bat
 #endif
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+	bl	setup_usbgecko_bat
+#endif
 
 /*
  * Call setup_cpu for CPU 0 and initialize 6xx Idle
@@ -1203,6 +1206,28 @@ setup_cpm_bat:
 	blr
 #endif
 
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+setup_usbgecko_bat:
+	/* prepare a BAT for early io */
+#if defined(CONFIG_GAMECUBE)
+	lis	r8, 0x0c00
+#elif defined(CONFIG_WII)
+	lis	r8, 0x0d00
+#else
+#error Invalid platform for USB Gecko based early debugging.
+#endif
+	/*
+	 * The virtual address used must match the virtual address
+	 * associated to the fixmap entry FIX_EARLY_DEBUG_BASE.
+	 */
+	lis	r11, 0xfffe	/* top 128K */
+	ori	r8, r8, 0x002a	/* uncached, guarded ,rw */
+	ori	r11, r11, 0x2	/* 128K, Vs=1, Vp=0 */
+	mtspr	SPRN_DBAT1L, r8
+	mtspr	SPRN_DBAT1U, r11
+	blr
+#endif
+
 #ifdef CONFIG_8260
 /* Jump into the system reset for the rom.
  * We first disable the MMU, and then jump to the ROM reset address.

arch/powerpc/kernel/udbg.c

@@ -60,6 +60,8 @@ void __init udbg_early_init(void)
 	udbg_init_40x_realmode();
 #elif defined(CONFIG_PPC_EARLY_DEBUG_CPM)
 	udbg_init_cpm();
+#elif defined(CONFIG_PPC_EARLY_DEBUG_USBGECKO)
+	udbg_init_usbgecko();
 #endif
 
 #ifdef CONFIG_PPC_EARLY_DEBUG

arch/powerpc/mm/40x_mmu.c

@@ -91,7 +91,7 @@ void __init MMU_init_hw(void)
 #define LARGE_PAGE_SIZE_16M	(1<<24)
 #define LARGE_PAGE_SIZE_4M	(1<<22)
 
-unsigned long __init mmu_mapin_ram(void)
+unsigned long __init mmu_mapin_ram(unsigned long top)
 {
 	unsigned long v, s, mapped;
 	phys_addr_t p;

arch/powerpc/mm/44x_mmu.c

@@ -88,7 +88,7 @@ void __init MMU_init_hw(void)
 	flush_instruction_cache();
 }
 
-unsigned long __init mmu_mapin_ram(void)
+unsigned long __init mmu_mapin_ram(unsigned long top)
 {
 	unsigned long addr;
 

arch/powerpc/mm/fsl_booke_mmu.c

@@ -207,7 +207,7 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
 	return amount_mapped;
 }
 
-unsigned long __init mmu_mapin_ram(void)
+unsigned long __init mmu_mapin_ram(unsigned long top)
 {
 	return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1;
 }

arch/powerpc/mm/init_32.c

@@ -82,6 +82,11 @@ extern struct task_struct *current_set[NR_CPUS];
 int __map_without_bats;
 int __map_without_ltlbs;
 
+/*
+ * This tells the system to allow ioremapping memory marked as reserved.
+ */
+int __allow_ioremap_reserved;
+
 /* max amount of low RAM to map in */
 unsigned long __max_low_memory = MAX_LOW_MEM;
 
@@ -131,9 +136,13 @@ void __init MMU_init(void)
 	MMU_setup();
 
 	if (lmb.memory.cnt > 1) {
+#ifndef CONFIG_WII
 		lmb.memory.cnt = 1;
 		lmb_analyze();
 		printk(KERN_WARNING "Only using first contiguous memory region");
+#else
+		wii_memory_fixups();
+#endif
 	}
 
 	total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;

arch/powerpc/mm/mmu_decl.h

@@ -104,6 +104,7 @@ extern void setbat(int index, unsigned long virt, phys_addr_t phys,
 		   unsigned int size, int flags);
 
 extern int __map_without_bats;
+extern int __allow_ioremap_reserved;
 extern unsigned long ioremap_base;
 extern unsigned int rtas_data, rtas_size;
 
@@ -125,24 +126,32 @@ extern phys_addr_t total_lowmem;
 extern phys_addr_t memstart_addr;
 extern phys_addr_t lowmem_end_addr;
 
+#ifdef CONFIG_WII
+extern unsigned long wii_hole_start;
+extern unsigned long wii_hole_size;
+
+extern unsigned long wii_mmu_mapin_mem2(unsigned long top);
+extern void wii_memory_fixups(void);
+#endif
+
 /* ...and now those things that may be slightly different between processor
  * architectures.  -- Dan
  */
 #if defined(CONFIG_8xx)
 #define MMU_init_hw()		do { } while(0)
-#define mmu_mapin_ram()		(0UL)
+#define mmu_mapin_ram(top)	(0UL)
 
 #elif defined(CONFIG_4xx)
 extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
+extern unsigned long mmu_mapin_ram(unsigned long top);
 
 #elif defined(CONFIG_FSL_BOOKE)
 extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
+extern unsigned long mmu_mapin_ram(unsigned long top);
 extern void adjust_total_lowmem(void);
 
 #elif defined(CONFIG_PPC32)
 /* anything 32-bit except 4xx or 8xx */
 extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
+extern unsigned long mmu_mapin_ram(unsigned long top);
 #endif

arch/powerpc/mm/pgtable_32.c

@@ -26,6 +26,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
+#include <linux/lmb.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -191,7 +192,8 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags,
 	 * Don't allow anybody to remap normal RAM that we're using.
 	 * mem_init() sets high_memory so only do the check after that.
 	 */
-	if (mem_init_done && (p < virt_to_phys(high_memory))) {
+	if (mem_init_done && (p < virt_to_phys(high_memory)) &&
+	    !(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) {
 		printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
 		       (unsigned long long)p, __builtin_return_address(0));
 		return NULL;
@@ -283,18 +285,18 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
 }
 
 /*
- * Map in a big chunk of physical memory starting at PAGE_OFFSET.
+ * Map in a chunk of physical memory starting at start.
  */
-void __init mapin_ram(void)
+void __init __mapin_ram_chunk(unsigned long offset, unsigned long top)
 {
 	unsigned long v, s, f;
 	phys_addr_t p;
 	int ktext;
 
-	s = mmu_mapin_ram();
+	s = offset;
 	v = PAGE_OFFSET + s;
 	p = memstart_addr + s;
-	for (; s < total_lowmem; s += PAGE_SIZE) {
+	for (; s < top; s += PAGE_SIZE) {
 		ktext = ((char *) v >= _stext && (char *) v < etext);
 		f = ktext ? PAGE_KERNEL_TEXT : PAGE_KERNEL;
 		map_page(v, p, f);
@@ -307,6 +309,30 @@ void __init mapin_ram(void)
 	}
 }
 
+void __init mapin_ram(void)
+{
+	unsigned long s, top;
+
+#ifndef CONFIG_WII
+	top = total_lowmem;
+	s = mmu_mapin_ram(top);
+	__mapin_ram_chunk(s, top);
+#else
+	if (!wii_hole_size) {
+		s = mmu_mapin_ram(total_lowmem);
+		__mapin_ram_chunk(s, total_lowmem);
+	} else {
+		top = wii_hole_start;
+		s = mmu_mapin_ram(top);
+		__mapin_ram_chunk(s, top);
+
+		top = lmb_end_of_DRAM();
+		s = wii_mmu_mapin_mem2(top);
+		__mapin_ram_chunk(s, top);
+	}
+#endif
+}
+
 /* Scan the real Linux page tables and return a PTE pointer for
  * a virtual address in a context.
  * Returns true (1) if PTE was found, zero otherwise.  The pointer to

arch/powerpc/mm/ppc_mmu_32.c

@@ -72,7 +72,7 @@ unsigned long p_mapped_by_bats(phys_addr_t pa)
 	return 0;
 }
 
-unsigned long __init mmu_mapin_ram(void)
+unsigned long __init mmu_mapin_ram(unsigned long top)
 {
 	unsigned long tot, bl, done;
 	unsigned long max_size = (256<<20);
@@ -86,7 +86,7 @@ unsigned long __init mmu_mapin_ram(void)
 
 	/* Make sure we don't map a block larger than the
 	   smallest alignment of the physical address. */
-	tot = total_lowmem;
+	tot = top;
 	for (bl = 128<<10; bl < max_size; bl <<= 1) {
 		if (bl * 2 > tot)
 			break;

arch/powerpc/platforms/Kconfig.cputype

@@ -311,7 +311,7 @@ config NR_CPUS
 
 config NOT_COHERENT_CACHE
 	bool
-	depends on 4xx || 8xx || E200 || PPC_MPC512x
+	depends on 4xx || 8xx || E200 || PPC_MPC512x || GAMECUBE_COMMON
 	default y
 
 config CHECK_CACHE_COHERENCY

arch/powerpc/platforms/embedded6xx/Kconfig

@@ -90,3 +90,36 @@ config MPC10X_OPENPIC
 config MPC10X_STORE_GATHERING
 	bool "Enable MPC10x store gathering"
 	depends on MPC10X_BRIDGE
+
+config GAMECUBE_COMMON
+	bool
+
+config USBGECKO_UDBG
+	bool "USB Gecko udbg console for the Nintendo GameCube/Wii"
+	depends on GAMECUBE_COMMON
+	help
+	  If you say yes to this option, support will be included for the
+	  USB Gecko adapter as an udbg console.
+	  The USB Gecko is a EXI to USB Serial converter that can be plugged
+	  into a memcard slot in the Nintendo GameCube/Wii.
+
+	  This driver bypasses the EXI layer completely.
+
+	  If in doubt, say N here.
+
+config GAMECUBE
+	bool "Nintendo-GameCube"
+	depends on EMBEDDED6xx
+	select GAMECUBE_COMMON
+	help
+	  Select GAMECUBE if configuring for the Nintendo GameCube.
+	  More information at: <http://gc-linux.sourceforge.net/>
+
+config WII
+	bool "Nintendo-Wii"
+	depends on EMBEDDED6xx
+	select GAMECUBE_COMMON
+	help
+	  Select WII if configuring for the Nintendo Wii.
+	  More information at: <http://gc-linux.sourceforge.net/>
+

arch/powerpc/platforms/embedded6xx/Makefile

@@ -7,3 +7,7 @@ obj-$(CONFIG_STORCENTER)	+= storcenter.o
 obj-$(CONFIG_PPC_HOLLY)		+= holly.o
 obj-$(CONFIG_PPC_PRPMC2800)	+= prpmc2800.o
 obj-$(CONFIG_PPC_C2K)		+= c2k.o
+obj-$(CONFIG_USBGECKO_UDBG)	+= usbgecko_udbg.o
+obj-$(CONFIG_GAMECUBE_COMMON)	+= flipper-pic.o
+obj-$(CONFIG_GAMECUBE)		+= gamecube.o
+obj-$(CONFIG_WII)		+= wii.o hlwd-pic.o

arch/powerpc/platforms/embedded6xx/flipper-pic.c

+/*
+ * arch/powerpc/platforms/embedded6xx/flipper-pic.c
+ *
+ * Nintendo GameCube/Wii "Flipper" interrupt controller support.
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+#define DRV_MODULE_NAME "flipper-pic"
+#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <asm/io.h>
+
+#include "flipper-pic.h"
+
+#define FLIPPER_NR_IRQS		32
+
+/*
+ * Each interrupt has a corresponding bit in both
+ * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers.
+ *
+ * Enabling/disabling an interrupt line involves setting/clearing
+ * the corresponding bit in IMR.
+ * Except for the RSW interrupt, all interrupts get deasserted automatically
+ * when the source deasserts the interrupt.
+ */
+#define FLIPPER_ICR		0x00
+#define FLIPPER_ICR_RSS		(1<<16) /* reset switch state */
+
+#define FLIPPER_IMR		0x04
+
+#define FLIPPER_RESET		0x24
+
+
+/*
+ * IRQ chip hooks.
+ *
+ */
+
+static void flipper_pic_mask_and_ack(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void __iomem *io_base = get_irq_chip_data(virq);
+	u32 mask = 1 << irq;
+
+	clrbits32(io_base + FLIPPER_IMR, mask);
+	/* this is at least needed for RSW */
+	out_be32(io_base + FLIPPER_ICR, mask);
+}
+
+static void flipper_pic_ack(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void __iomem *io_base = get_irq_chip_data(virq);
+
+	/* this is at least needed for RSW */
+	out_be32(io_base + FLIPPER_ICR, 1 << irq);
+}
+
+static void flipper_pic_mask(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void __iomem *io_base = get_irq_chip_data(virq);
+
+	clrbits32(io_base + FLIPPER_IMR, 1 << irq);
+}
+
+static void flipper_pic_unmask(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void __iomem *io_base = get_irq_chip_data(virq);
+
+	setbits32(io_base + FLIPPER_IMR, 1 << irq);
+}
+
+
+static struct irq_chip flipper_pic = {
+	.name		= "flipper-pic",
+	.ack		= flipper_pic_ack,
+	.mask_ack	= flipper_pic_mask_and_ack,
+	.mask		= flipper_pic_mask,
+	.unmask		= flipper_pic_unmask,
+};
+
+/*
+ * IRQ host hooks.
+ *
+ */
+
+static struct irq_host *flipper_irq_host;
+
+static int flipper_pic_map(struct irq_host *h, unsigned int virq,
+			   irq_hw_number_t hwirq)
+{
+	set_irq_chip_data(virq, h->host_data);
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &flipper_pic, handle_level_irq);
+	return 0;
+}
+
+static void flipper_pic_unmap(struct irq_host *h, unsigned int irq)
+{
+	set_irq_chip_data(irq, NULL);
+	set_irq_chip(irq, NULL);
+}
+
+static int flipper_pic_match(struct irq_host *h, struct device_node *np)
+{
+	return 1;
+}
+
+
+static struct irq_host_ops flipper_irq_host_ops = {
+	.map = flipper_pic_map,
+	.unmap = flipper_pic_unmap,
+	.match = flipper_pic_match,
+};
+
+/*
+ * Platform hooks.
+ *
+ */
+
+static void __flipper_quiesce(void __iomem *io_base)
+{
+	/* mask and ack all IRQs */
+	out_be32(io_base + FLIPPER_IMR, 0x00000000);
+	out_be32(io_base + FLIPPER_ICR, 0xffffffff);
+}
+
+struct irq_host * __init flipper_pic_init(struct device_node *np)
+{
+	struct device_node *pi;
+	struct irq_host *irq_host = NULL;
+	struct resource res;
+	void __iomem *io_base;
+	int retval;
+
+	pi = of_get_parent(np);
+	if (!pi) {
+		pr_err("no parent found\n");
+		goto out;
+	}
+	if (!of_device_is_compatible(pi, "nintendo,flipper-pi")) {
+		pr_err("unexpected parent compatible\n");
+		goto out;
+	}
+
+	retval = of_address_to_resource(pi, 0, &res);
+	if (retval) {
+		pr_err("no io memory range found\n");
+		goto out;
+	}
+	io_base = ioremap(res.start, resource_size(&res));
+
+	pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
+
+	__flipper_quiesce(io_base);
+
+	irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, FLIPPER_NR_IRQS,
+				  &flipper_irq_host_ops, -1);
+	if (!irq_host) {
+		pr_err("failed to allocate irq_host\n");
+		return NULL;
+	}
+
+	irq_host->host_data = io_base;
+
+out:
+	return irq_host;
+}
+
+unsigned int flipper_pic_get_irq(void)
+{
+	void __iomem *io_base = flipper_irq_host->host_data;
+	int irq;
+	u32 irq_status;
+
+	irq_status = in_be32(io_base + FLIPPER_ICR) &
+		     in_be32(io_base + FLIPPER_IMR);
+	if (irq_status == 0)
+		return NO_IRQ;	/* no more IRQs pending */
+
+	irq = __ffs(irq_status);
+	return irq_linear_revmap(flipper_irq_host, irq);
+}
+
+/*
+ * Probe function.
+ *
+ */
+
+void __init flipper_pic_probe(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-pic");
+	BUG_ON(!np);
+
+	flipper_irq_host = flipper_pic_init(np);
+	BUG_ON(!flipper_irq_host);
+
+	irq_set_default_host(flipper_irq_host);
+
+	of_node_put(np);
+}
+
+/*
+ * Misc functions related to the flipper chipset.
+ *
+ */
+
+/**
+ * flipper_quiesce() - quiesce flipper irq controller
+ *
+ * Mask and ack all interrupt sources.
+ *
+ */
+void flipper_quiesce(void)
+{
+	void __iomem *io_base = flipper_irq_host->host_data;
+
+	__flipper_quiesce(io_base);
+}
+
+/*
+ * Resets the platform.
+ */
+void flipper_platform_reset(void)
+{
+	void __iomem *io_base;
+
+	if (flipper_irq_host && flipper_irq_host->host_data) {
+		io_base = flipper_irq_host->host_data;
+		out_8(io_base + FLIPPER_RESET, 0x00);
+	}
+}
+
+/*
+ * Returns non-zero if the reset button is pressed.
+ */
+int flipper_is_reset_button_pressed(void)
+{
+	void __iomem *io_base;
+	u32 icr;
+
+	if (flipper_irq_host && flipper_irq_host->host_data) {
+		io_base = flipper_irq_host->host_data;
+		icr = in_be32(io_base + FLIPPER_ICR);
+		return !(icr & FLIPPER_ICR_RSS);
+	}
+	return 0;
+}
+

arch/powerpc/platforms/embedded6xx/flipper-pic.h

+/*
+ * arch/powerpc/platforms/embedded6xx/flipper-pic.h
+ *
+ * Nintendo GameCube/Wii "Flipper" interrupt controller support.
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __FLIPPER_PIC_H
+#define __FLIPPER_PIC_H
+
+unsigned int flipper_pic_get_irq(void);
+void __init flipper_pic_probe(void);
+
+void flipper_quiesce(void);
+void flipper_platform_reset(void);
+int flipper_is_reset_button_pressed(void);
+
+#endif

arch/powerpc/platforms/embedded6xx/gamecube.c

+/*
+ * arch/powerpc/platforms/embedded6xx/gamecube.c
+ *
+ * Nintendo GameCube board-specific support
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kexec.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+#include "flipper-pic.h"
+#include "usbgecko_udbg.h"
+
+
+static void gamecube_spin(void)
+{
+	/* spin until power button pressed */
+	for (;;)
+		cpu_relax();
+}
+
+static void gamecube_restart(char *cmd)
+{
+	local_irq_disable();
+	flipper_platform_reset();
+	gamecube_spin();
+}
+
+static void gamecube_power_off(void)
+{
+	local_irq_disable();
+	gamecube_spin();
+}
+
+static void gamecube_halt(void)
+{
+	gamecube_restart(NULL);
+}
+
+static void __init gamecube_init_early(void)
+{
+	ug_udbg_init();
+}
+
+static int __init gamecube_probe(void)
+{
+	unsigned long dt_root;
+
+	dt_root = of_get_flat_dt_root();
+	if (!of_flat_dt_is_compatible(dt_root, "nintendo,gamecube"))
+		return 0;
+
+	return 1;
+}
+
+static void gamecube_shutdown(void)
+{
+	flipper_quiesce();
+}
+
+#ifdef CONFIG_KEXEC
+static int gamecube_kexec_prepare(struct kimage *image)
+{
+	return 0;
+}
+#endif /* CONFIG_KEXEC */
+
+
+define_machine(gamecube) {
+	.name			= "gamecube",
+	.probe			= gamecube_probe,
+	.init_early		= gamecube_init_early,
+	.restart		= gamecube_restart,
+	.power_off		= gamecube_power_off,
+	.halt			= gamecube_halt,
+	.init_IRQ		= flipper_pic_probe,
+	.get_irq		= flipper_pic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+	.machine_shutdown	= gamecube_shutdown,
+#ifdef CONFIG_KEXEC
+	.machine_kexec_prepare	= gamecube_kexec_prepare,
+#endif
+};
+
+
+static struct of_device_id gamecube_of_bus[] = {
+	{ .compatible = "nintendo,flipper", },
+	{ },
+};
+
+static int __init gamecube_device_probe(void)
+{
+	if (!machine_is(gamecube))
+		return 0;
+
+	of_platform_bus_probe(NULL, gamecube_of_bus, NULL);
+	return 0;
+}
+device_initcall(gamecube_device_probe);
+

arch/powerpc/platforms/embedded6xx/hlwd-pic.c

+/*
+ * arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+ *
+ * Nintendo Wii "Hollywood" interrupt controller support.
+ * Copyright (C) 2009 The GameCube Linux Team
+ * Copyright (C) 2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+#define DRV_MODULE_NAME "hlwd-pic"
+#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <asm/io.h>
+
+#include "hlwd-pic.h"
+
+#define HLWD_NR_IRQS	32
+
+/*
+ * Each interrupt has a corresponding bit in both
+ * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers.
+ *
+ * Enabling/disabling an interrupt line involves asserting/clearing
+ * the corresponding bit in IMR. ACK'ing a request simply involves
+ * asserting the corresponding bit in ICR.
+ */
+#define HW_BROADWAY_ICR		0x00
+#define HW_BROADWAY_IMR		0x04
+
+
+/*
+ * IRQ chip hooks.
+ *
+ */
+
+static void hlwd_pic_mask_and_ack(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void __iomem *io_base = get_irq_chip_data(virq);
+	u32 mask = 1 << irq;
+
+	clrbits32(io_base + HW_BROADWAY_IMR, mask);
+	out_be32(io_base + HW_BROADWAY_ICR, mask);
+}
+
+static void hlwd_pic_ack(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void __iomem *io_base = get_irq_chip_data(virq);
+
+	out_be32(io_base + HW_BROADWAY_ICR, 1 << irq);
+}
+
+static void hlwd_pic_mask(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void __iomem *io_base = get_irq_chip_data(virq);
+
+	clrbits32(io_base + HW_BROADWAY_IMR, 1 << irq);
+}
+
+static void hlwd_pic_unmask(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void __iomem *io_base = get_irq_chip_data(virq);
+
+	setbits32(io_base + HW_BROADWAY_IMR, 1 << irq);
+}
+
+
+static struct irq_chip hlwd_pic = {
+	.name		= "hlwd-pic",
+	.ack		= hlwd_pic_ack,
+	.mask_ack	= hlwd_pic_mask_and_ack,
+	.mask		= hlwd_pic_mask,
+	.unmask		= hlwd_pic_unmask,
+};
+
+/*
+ * IRQ host hooks.
+ *
+ */
+
+static struct irq_host *hlwd_irq_host;
+
+static int hlwd_pic_map(struct irq_host *h, unsigned int virq,
+			   irq_hw_number_t hwirq)
+{
+	set_irq_chip_data(virq, h->host_data);
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &hlwd_pic, handle_level_irq);
+	return 0;
+}
+
+static void hlwd_pic_unmap(struct irq_host *h, unsigned int irq)
+{
+	set_irq_chip_data(irq, NULL);
+	set_irq_chip(irq, NULL);
+}
+
+static struct irq_host_ops hlwd_irq_host_ops = {
+	.map = hlwd_pic_map,
+	.unmap = hlwd_pic_unmap,
+};
+
+static unsigned int __hlwd_pic_get_irq(struct irq_host *h)
+{
+	void __iomem *io_base = h->host_data;
+	int irq;
+	u32 irq_status;
+
+	irq_status = in_be32(io_base + HW_BROADWAY_ICR) &
+		     in_be32(io_base + HW_BROADWAY_IMR);
+	if (irq_status == 0)
+		return NO_IRQ;	/* no more IRQs pending */
+
+	irq = __ffs(irq_status);
+	return irq_linear_revmap(h, irq);
+}
+
+static void hlwd_pic_irq_cascade(unsigned int cascade_virq,
+				      struct irq_desc *desc)
+{
+	struct irq_host *irq_host = get_irq_data(cascade_virq);
+	unsigned int virq;
+
+	spin_lock(&desc->lock);
+	desc->chip->mask(cascade_virq); /* IRQ_LEVEL */
+	spin_unlock(&desc->lock);
+
+	virq = __hlwd_pic_get_irq(irq_host);
+	if (virq != NO_IRQ)
+		generic_handle_irq(virq);
+	else
+		pr_err("spurious interrupt!\n");
+
+	spin_lock(&desc->lock);
+	desc->chip->ack(cascade_virq); /* IRQ_LEVEL */
+	if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
+		desc->chip->unmask(cascade_virq);
+	spin_unlock(&desc->lock);
+}
+
+/*
+ * Platform hooks.
+ *
+ */
+
+static void __hlwd_quiesce(void __iomem *io_base)
+{
+	/* mask and ack all IRQs */
+	out_be32(io_base + HW_BROADWAY_IMR, 0);
+	out_be32(io_base + HW_BROADWAY_ICR, 0xffffffff);
+}
+
+struct irq_host *hlwd_pic_init(struct device_node *np)
+{
+	struct irq_host *irq_host;
+	struct resource res;
+	void __iomem *io_base;
+	int retval;
+
+	retval = of_address_to_resource(np, 0, &res);
+	if (retval) {
+		pr_err("no io memory range found\n");
+		return NULL;
+	}
+	io_base = ioremap(res.start, resource_size(&res));
+	if (!io_base) {
+		pr_err("ioremap failed\n");
+		return NULL;
+	}
+
+	pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base);
+
+	__hlwd_quiesce(io_base);
+
+	irq_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, HLWD_NR_IRQS,
+				  &hlwd_irq_host_ops, -1);
+	if (!irq_host) {
+		pr_err("failed to allocate irq_host\n");
+		return NULL;
+	}
+	irq_host->host_data = io_base;
+
+	return irq_host;
+}
+
+unsigned int hlwd_pic_get_irq(void)
+{
+	return __hlwd_pic_get_irq(hlwd_irq_host);
+}
+
+/*
+ * Probe function.
+ *
+ */
+
+void hlwd_pic_probe(void)
+{
+	struct irq_host *host;
+	struct device_node *np;
+	const u32 *interrupts;
+	int cascade_virq;
+
+	for_each_compatible_node(np, NULL, "nintendo,hollywood-pic") {
+		interrupts = of_get_property(np, "interrupts", NULL);
+		if (interrupts) {
+			host = hlwd_pic_init(np);
+			BUG_ON(!host);
+			cascade_virq = irq_of_parse_and_map(np, 0);
+			set_irq_data(cascade_virq, host);
+			set_irq_chained_handler(cascade_virq,
+						hlwd_pic_irq_cascade);
+			hlwd_irq_host = host;
+			break;
+		}
+	}
+}
+
+/**
+ * hlwd_quiesce() - quiesce hollywood irq controller
+ *
+ * Mask and ack all interrupt sources.
+ *
+ */
+void hlwd_quiesce(void)
+{
+	void __iomem *io_base = hlwd_irq_host->host_data;
+
+	__hlwd_quiesce(io_base);
+}
+

arch/powerpc/platforms/embedded6xx/hlwd-pic.h

+/*
+ * arch/powerpc/platforms/embedded6xx/hlwd-pic.h
+ *
+ * Nintendo Wii "Hollywood" interrupt controller support.
+ * Copyright (C) 2009 The GameCube Linux Team
+ * Copyright (C) 2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __HLWD_PIC_H
+#define __HLWD_PIC_H
+
+extern unsigned int hlwd_pic_get_irq(void);
+extern void hlwd_pic_probe(void);
+extern void hlwd_quiesce(void);
+
+#endif

arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h

+/*
+ * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
+ *
+ * udbg serial input/output routines for the USB Gecko adapter.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __USBGECKO_UDBG_H
+#define __USBGECKO_UDBG_H
+
+#ifdef CONFIG_USBGECKO_UDBG
+
+extern void __init ug_udbg_init(void);
+
+#else
+
+static inline void __init ug_udbg_init(void)
+{
+}
+
+#endif /* CONFIG_USBGECKO_UDBG */
+
+void __init udbg_init_usbgecko(void);
+
+#endif /* __USBGECKO_UDBG_H */

include/linux/lmb.h

@@ -54,6 +54,7 @@ extern u64 __init lmb_phys_mem_size(void);
 extern u64 lmb_end_of_DRAM(void);
 extern void __init lmb_enforce_memory_limit(u64 memory_limit);
 extern int __init lmb_is_reserved(u64 addr);
+extern int lmb_is_region_reserved(u64 base, u64 size);
 extern int lmb_find(struct lmb_property *res);
 
 extern void lmb_dump_all(void);

lib/lmb.c

@@ -263,7 +263,7 @@ long __init lmb_reserve(u64 base, u64 size)
 	return lmb_add_region(_rgn, base, size);
 }
 
-long __init lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size)
+long lmb_overlaps_region(struct lmb_region *rgn, u64 base, u64 size)
 {
 	unsigned long i;
 
@@ -493,6 +493,11 @@ int __init lmb_is_reserved(u64 addr)
 	return 0;
 }
 
+int lmb_is_region_reserved(u64 base, u64 size)
+{
+	return lmb_overlaps_region(&lmb.reserved, base, size);
+}
+
 /*
  * Given a <base, len>, find which memory regions belong to this range.
  * Adjust the request and return a contiguous chunk.