Merge branch 'for-linus' of git://dev.laptop.org/users/cjb/mmc

* 'for-linus' of git://dev.laptop.org/users/cjb/mmc:
  mmc: sdhci-s3c: Fix mmc card I/O problem
  mmc: sd: UHS-I bus speed should be set last in UHS initialization
  mmc: sdhi: initialise mmc_data->flags before use
  mmc: core: use non-reentrant workqueue for clock gating
  mmc: core: prevent aggressive clock gating racing with ios updates
  mmc: rename mmc_host_clk_{ungate|gate} to mmc_host_clk_{hold|release}
  mmc: sdhci-esdhc-imx: add missing inclusion of linux/module.h

drivers/mmc/core/core.c

@@ -133,7 +133,7 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 		if (mrq->done)
 			mrq->done(mrq);
 
-		mmc_host_clk_gate(host);
+		mmc_host_clk_release(host);
 	}
 }
 
@@ -192,7 +192,7 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 			mrq->stop->mrq = mrq;
 		}
 	}
-	mmc_host_clk_ungate(host);
+	mmc_host_clk_hold(host);
 	led_trigger_event(host->led, LED_FULL);
 	host->ops->request(host, mrq);
 }
@@ -728,15 +728,17 @@ static inline void mmc_set_ios(struct mmc_host *host)
  */
 void mmc_set_chip_select(struct mmc_host *host, int mode)
 {
+	mmc_host_clk_hold(host);
 	host->ios.chip_select = mode;
 	mmc_set_ios(host);
+	mmc_host_clk_release(host);
 }
 
 /*
  * Sets the host clock to the highest possible frequency that
  * is below "hz".
  */
-void mmc_set_clock(struct mmc_host *host, unsigned int hz)
+static void __mmc_set_clock(struct mmc_host *host, unsigned int hz)
 {
 	WARN_ON(hz < host->f_min);
 
@@ -747,6 +749,13 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz)
 	mmc_set_ios(host);
 }
 
+void mmc_set_clock(struct mmc_host *host, unsigned int hz)
+{
+	mmc_host_clk_hold(host);
+	__mmc_set_clock(host, hz);
+	mmc_host_clk_release(host);
+}
+
 #ifdef CONFIG_MMC_CLKGATE
 /*
  * This gates the clock by setting it to 0 Hz.
@@ -779,7 +788,7 @@ void mmc_ungate_clock(struct mmc_host *host)
 	if (host->clk_old) {
 		BUG_ON(host->ios.clock);
 		/* This call will also set host->clk_gated to false */
-		mmc_set_clock(host, host->clk_old);
+		__mmc_set_clock(host, host->clk_old);
 	}
 }
 
@@ -807,8 +816,10 @@ void mmc_set_ungated(struct mmc_host *host)
  */
 void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
 {
+	mmc_host_clk_hold(host);
 	host->ios.bus_mode = mode;
 	mmc_set_ios(host);
+	mmc_host_clk_release(host);
 }
 
 /*
@@ -816,8 +827,10 @@ void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode)
  */
 void mmc_set_bus_width(struct mmc_host *host, unsigned int width)
 {
+	mmc_host_clk_hold(host);
 	host->ios.bus_width = width;
 	mmc_set_ios(host);
+	mmc_host_clk_release(host);
 }
 
 /**
@@ -1015,8 +1028,10 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 
 		ocr &= 3 << bit;
 
+		mmc_host_clk_hold(host);
 		host->ios.vdd = bit;
 		mmc_set_ios(host);
+		mmc_host_clk_release(host);
 	} else {
 		pr_warning("%s: host doesn't support card's voltages\n",
 				mmc_hostname(host));
@@ -1063,8 +1078,10 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, bool cmd11
  */
 void mmc_set_timing(struct mmc_host *host, unsigned int timing)
 {
+	mmc_host_clk_hold(host);
 	host->ios.timing = timing;
 	mmc_set_ios(host);
+	mmc_host_clk_release(host);
 }
 
 /*
@@ -1072,8 +1089,10 @@ void mmc_set_timing(struct mmc_host *host, unsigned int timing)
  */
 void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
 {
+	mmc_host_clk_hold(host);
 	host->ios.drv_type = drv_type;
 	mmc_set_ios(host);
+	mmc_host_clk_release(host);
 }
 
 /*
@@ -1091,6 +1110,8 @@ static void mmc_power_up(struct mmc_host *host)
 {
 	int bit;
 
+	mmc_host_clk_hold(host);
+
 	/* If ocr is set, we use it */
 	if (host->ocr)
 		bit = ffs(host->ocr) - 1;
@@ -1126,10 +1147,14 @@ static void mmc_power_up(struct mmc_host *host)
 	 * time required to reach a stable voltage.
 	 */
 	mmc_delay(10);
+
+	mmc_host_clk_release(host);
 }
 
 static void mmc_power_off(struct mmc_host *host)
 {
+	mmc_host_clk_hold(host);
+
 	host->ios.clock = 0;
 	host->ios.vdd = 0;
 
@@ -1147,6 +1172,8 @@ static void mmc_power_off(struct mmc_host *host)
 	host->ios.bus_width = MMC_BUS_WIDTH_1;
 	host->ios.timing = MMC_TIMING_LEGACY;
 	mmc_set_ios(host);
+
+	mmc_host_clk_release(host);
 }
 
 /*

drivers/mmc/core/host.c

@@ -119,14 +119,14 @@ static void mmc_host_clk_gate_work(struct work_struct *work)
 }
 
 /**
- *	mmc_host_clk_ungate - ungate hardware MCI clocks
+ *	mmc_host_clk_hold - ungate hardware MCI clocks
  *	@host: host to ungate.
  *
  *	Makes sure the host ios.clock is restored to a non-zero value
  *	past this call.	Increase clock reference count and ungate clock
  *	if we're the first user.
  */
-void mmc_host_clk_ungate(struct mmc_host *host)
+void mmc_host_clk_hold(struct mmc_host *host)
 {
 	unsigned long flags;
 
@@ -164,14 +164,14 @@ static bool mmc_host_may_gate_card(struct mmc_card *card)
 }
 
 /**
- *	mmc_host_clk_gate - gate off hardware MCI clocks
+ *	mmc_host_clk_release - gate off hardware MCI clocks
  *	@host: host to gate.
  *
  *	Calls the host driver with ios.clock set to zero as often as possible
  *	in order to gate off hardware MCI clocks. Decrease clock reference
  *	count and schedule disabling of clock.
  */
-void mmc_host_clk_gate(struct mmc_host *host)
+void mmc_host_clk_release(struct mmc_host *host)
 {
 	unsigned long flags;
 
@@ -179,7 +179,7 @@ void mmc_host_clk_gate(struct mmc_host *host)
 	host->clk_requests--;
 	if (mmc_host_may_gate_card(host->card) &&
 	    !host->clk_requests)
-		schedule_work(&host->clk_gate_work);
+		queue_work(system_nrt_wq, &host->clk_gate_work);
 	spin_unlock_irqrestore(&host->clk_lock, flags);
 }
 
@@ -231,7 +231,7 @@ static inline void mmc_host_clk_exit(struct mmc_host *host)
 	if (cancel_work_sync(&host->clk_gate_work))
 		mmc_host_clk_gate_delayed(host);
 	if (host->clk_gated)
-		mmc_host_clk_ungate(host);
+		mmc_host_clk_hold(host);
 	/* There should be only one user now */
 	WARN_ON(host->clk_requests > 1);
 }

drivers/mmc/core/host.h

@@ -16,16 +16,16 @@ int mmc_register_host_class(void);
 void mmc_unregister_host_class(void);
 
 #ifdef CONFIG_MMC_CLKGATE
-void mmc_host_clk_ungate(struct mmc_host *host);
-void mmc_host_clk_gate(struct mmc_host *host);
+void mmc_host_clk_hold(struct mmc_host *host);
+void mmc_host_clk_release(struct mmc_host *host);
 unsigned int mmc_host_clk_rate(struct mmc_host *host);
 
 #else
-static inline void mmc_host_clk_ungate(struct mmc_host *host)
+static inline void mmc_host_clk_hold(struct mmc_host *host)
 {
 }
 
-static inline void mmc_host_clk_gate(struct mmc_host *host)
+static inline void mmc_host_clk_release(struct mmc_host *host)
 {
 }
 

drivers/mmc/core/sd.c

@@ -469,56 +469,75 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
 	return 0;
 }
 
-static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
+static void sd_update_bus_speed_mode(struct mmc_card *card)
 {
-	unsigned int bus_speed = 0, timing = 0;
-	int err;
-
 	/*
 	 * If the host doesn't support any of the UHS-I modes, fallback on
 	 * default speed.
 	 */
 	if (!(card->host->caps & (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 |
-	    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50)))
-		return 0;
+	    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_DDR50))) {
+		card->sd_bus_speed = 0;
+		return;
+	}
 
 	if ((card->host->caps & MMC_CAP_UHS_SDR104) &&
 	    (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) {
-			bus_speed = UHS_SDR104_BUS_SPEED;
-			timing = MMC_TIMING_UHS_SDR104;
-			card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR104_BUS_SPEED;
 	} else if ((card->host->caps & MMC_CAP_UHS_DDR50) &&
 		   (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) {
-			bus_speed = UHS_DDR50_BUS_SPEED;
-			timing = MMC_TIMING_UHS_DDR50;
-			card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
+			card->sd_bus_speed = UHS_DDR50_BUS_SPEED;
 	} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
 		    MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode &
 		    SD_MODE_UHS_SDR50)) {
-			bus_speed = UHS_SDR50_BUS_SPEED;
-			timing = MMC_TIMING_UHS_SDR50;
-			card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR50_BUS_SPEED;
 	} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
 		    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) &&
 		   (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) {
-			bus_speed = UHS_SDR25_BUS_SPEED;
-			timing = MMC_TIMING_UHS_SDR25;
-			card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR25_BUS_SPEED;
 	} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
 		    MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 |
 		    MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode &
 		    SD_MODE_UHS_SDR12)) {
-			bus_speed = UHS_SDR12_BUS_SPEED;
-			timing = MMC_TIMING_UHS_SDR12;
-			card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
+			card->sd_bus_speed = UHS_SDR12_BUS_SPEED;
+	}
+}
+
+static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
+{
+	int err;
+	unsigned int timing = 0;
+
+	switch (card->sd_bus_speed) {
+	case UHS_SDR104_BUS_SPEED:
+		timing = MMC_TIMING_UHS_SDR104;
+		card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
+		break;
+	case UHS_DDR50_BUS_SPEED:
+		timing = MMC_TIMING_UHS_DDR50;
+		card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
+		break;
+	case UHS_SDR50_BUS_SPEED:
+		timing = MMC_TIMING_UHS_SDR50;
+		card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
+		break;
+	case UHS_SDR25_BUS_SPEED:
+		timing = MMC_TIMING_UHS_SDR25;
+		card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
+		break;
+	case UHS_SDR12_BUS_SPEED:
+		timing = MMC_TIMING_UHS_SDR12;
+		card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
+		break;
+	default:
+		return 0;
 	}
 
-	card->sd_bus_speed = bus_speed;
-	err = mmc_sd_switch(card, 1, 0, bus_speed, status);
+	err = mmc_sd_switch(card, 1, 0, card->sd_bus_speed, status);
 	if (err)
 		return err;
 
-	if ((status[16] & 0xF) != bus_speed)
+	if ((status[16] & 0xF) != card->sd_bus_speed)
 		printk(KERN_WARNING "%s: Problem setting bus speed mode!\n",
 			mmc_hostname(card->host));
 	else {
@@ -618,18 +637,24 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
 		mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
 	}
 
+	/*
+	 * Select the bus speed mode depending on host
+	 * and card capability.
+	 */
+	sd_update_bus_speed_mode(card);
+
 	/* Set the driver strength for the card */
 	err = sd_select_driver_type(card, status);
 	if (err)
 		goto out;
 
-	/* Set bus speed mode of the card */
-	err = sd_set_bus_speed_mode(card, status);
+	/* Set current limit for the card */
+	err = sd_set_current_limit(card, status);
 	if (err)
 		goto out;
 
-	/* Set current limit for the card */
-	err = sd_set_current_limit(card, status);
+	/* Set bus speed mode of the card */
+	err = sd_set_bus_speed_mode(card, status);
 	if (err)
 		goto out;
 

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>

drivers/mmc/host/sdhci-s3c.c

@@ -302,6 +302,8 @@ static int sdhci_s3c_platform_8bit_width(struct sdhci_host *host, int width)
 		ctrl &= ~SDHCI_CTRL_8BITBUS;
 		break;
 	default:
+		ctrl &= ~SDHCI_CTRL_4BITBUS;
+		ctrl &= ~SDHCI_CTRL_8BITBUS;
 		break;
 	}
 

drivers/mmc/host/sh_mobile_sdhi.c

@@ -120,11 +120,11 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev)
 	mmc_data->hclk = clk_get_rate(priv->clk);
 	mmc_data->set_pwr = sh_mobile_sdhi_set_pwr;
 	mmc_data->get_cd = sh_mobile_sdhi_get_cd;
-	if (mmc_data->flags & TMIO_MMC_HAS_IDLE_WAIT)
-		mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
 	mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED;
 	if (p) {
 		mmc_data->flags = p->tmio_flags;
+		if (mmc_data->flags & TMIO_MMC_HAS_IDLE_WAIT)
+			mmc_data->write16_hook = sh_mobile_sdhi_write16_hook;
 		mmc_data->ocr_mask = p->tmio_ocr_mask;
 		mmc_data->capabilities |= p->tmio_caps;