提交 a63e3d2a 编写于 作者: S Sean Wang 提交者: Matthias Brugger

arm: dts: mt7623: add BTIF, HSDMA and SPI-NOR device nodes

add BTIF, HSDMA and SPI-NOR device nodes and enable it on relevant boards
Signed-off-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NMatthias Brugger <matthias.bgg@gmail.com>
上级 1c8fadd3
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017 MediaTek Inc.
* Copyright (c) 2017-2018 MediaTek Inc.
* Author: John Crispin <john@phrozen.org>
* Sean Wang <sean.wang@mediatek.com>
*
......@@ -486,6 +486,18 @@
nvmem-cell-names = "calibration-data";
};
btif: serial@1100c000 {
compatible = "mediatek,mt7623-btif",
"mediatek,mtk-btif";
reg = <0 0x1100c000 0 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_BTIF>;
clock-names = "main";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
};
nandc: nfi@1100d000 {
compatible = "mediatek,mt7623-nfc",
"mediatek,mt2701-nfc";
......@@ -511,6 +523,18 @@
status = "disabled";
};
nor_flash: spi@11014000 {
compatible = "mediatek,mt7623-nor",
"mediatek,mt8173-nor";
reg = <0 0x11014000 0 0x1000>;
clocks = <&pericfg CLK_PERI_FLASH>,
<&topckgen CLK_TOP_FLASH_SEL>;
clock-names = "spi", "sf";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@11016000 {
compatible = "mediatek,mt7623-spi",
"mediatek,mt2701-spi";
......@@ -861,6 +885,16 @@
#reset-cells = <1>;
};
hsdma: dma-controller@1b007000 {
compatible = "mediatek,mt7623-hsdma";
reg = <0 0x1b007000 0 0x1000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>;
clocks = <&ethsys CLK_ETHSYS_HSDMA>;
clock-names = "hsdma";
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
#dma-cells = <1>;
};
eth: ethernet@1b100000 {
compatible = "mediatek,mt7623-eth",
"mediatek,mt2701-eth",
......
/*
* Copyright 2017 Sean Wang <sean.wang@mediatek.com>
* Copyright 2017-2018 Sean Wang <sean.wang@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
......@@ -114,6 +114,10 @@
};
};
&btif {
status = "okay";
};
&cir {
pinctrl-names = "default";
pinctrl-0 = <&cir_pins_a>;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册