提交 a5e11599 编写于 作者: L Linus Torvalds

Merge branch 'x86-hwmon-for-linus' of...

Merge branch 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Package Level Thermal/Power: pkgtemp documentation
  x86, hwmon: Package Level Thermal/Power: power limit
  x86, hwmon: Package Level Thermal/Power: thermal throttling handler
  x86, hwmon: Package Level Thermal/Power: pkgtemp hwmon driver
Kernel driver pkgtemp
======================
Supported chips:
* Intel family
Prefix: 'pkgtemp'
CPUID:
Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3A: System Programming Guide
Author: Fenghua Yu
Description
-----------
This driver permits reading package level temperature sensor embedded inside
Intel CPU package. The sensors can be in core, uncore, memory controller, or
other components in a package. The feature is first implemented in Intel Sandy
Bridge platform.
Temperature is measured in degrees Celsius and measurement resolution is
1 degree C. Valid temperatures are from 0 to TjMax degrees C, because the actual
value of temperature register is in fact a delta from TjMax.
Temperature known as TjMax is the maximum junction temperature of package.
We get this from MSR_IA32_TEMPERATURE_TARGET. If the MSR is not accessible,
we define TjMax as 100 degrees Celsius. At this temperature, protection
mechanism will perform actions to forcibly cool down the package. Alarm
may be raised, if the temperature grows enough (more than TjMax) to trigger
the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
temp1_input - Package temperature (in millidegrees Celsius).
temp1_max - All cooling devices should be turned on.
temp1_crit - Maximum junction temperature (in millidegrees Celsius).
temp1_crit_alarm - Set when Out-of-spec bit is set, never clears.
Correct CPU operation is no longer guaranteed.
......@@ -1471,6 +1471,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_PKGTEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
......
......@@ -1456,6 +1456,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_PKGTEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
......
......@@ -34,15 +34,25 @@
/* How long to wait between reporting thermal events */
#define CHECK_INTERVAL (300 * HZ)
#define THERMAL_THROTTLING_EVENT 0
#define POWER_LIMIT_EVENT 1
/*
* Current thermal throttling state:
* Current thermal event state:
*/
struct thermal_state {
bool is_throttled;
struct _thermal_state {
bool new_event;
int event;
u64 next_check;
unsigned long throttle_count;
unsigned long last_throttle_count;
unsigned long count;
unsigned long last_count;
};
struct thermal_state {
struct _thermal_state core_throttle;
struct _thermal_state core_power_limit;
struct _thermal_state package_throttle;
struct _thermal_state package_power_limit;
};
static DEFINE_PER_CPU(struct thermal_state, thermal_state);
......@@ -53,11 +63,13 @@ static u32 lvtthmr_init __read_mostly;
#ifdef CONFIG_SYSFS
#define define_therm_throt_sysdev_one_ro(_name) \
static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
static SYSDEV_ATTR(_name, 0444, \
therm_throt_sysdev_show_##_name, \
NULL) \
#define define_therm_throt_sysdev_show_func(name) \
#define define_therm_throt_sysdev_show_func(event, name) \
\
static ssize_t therm_throt_sysdev_show_##name( \
static ssize_t therm_throt_sysdev_show_##event##_##name( \
struct sys_device *dev, \
struct sysdev_attribute *attr, \
char *buf) \
......@@ -66,30 +78,42 @@ static ssize_t therm_throt_sysdev_show_##name( \
ssize_t ret; \
\
preempt_disable(); /* CPU hotplug */ \
if (cpu_online(cpu)) \
if (cpu_online(cpu)) { \
ret = sprintf(buf, "%lu\n", \
per_cpu(thermal_state, cpu).name); \
else \
per_cpu(thermal_state, cpu).event.name); \
} else \
ret = 0; \
preempt_enable(); \
\
return ret; \
}
define_therm_throt_sysdev_show_func(throttle_count);
define_therm_throt_sysdev_one_ro(throttle_count);
define_therm_throt_sysdev_show_func(core_throttle, count);
define_therm_throt_sysdev_one_ro(core_throttle_count);
define_therm_throt_sysdev_show_func(core_power_limit, count);
define_therm_throt_sysdev_one_ro(core_power_limit_count);
define_therm_throt_sysdev_show_func(package_throttle, count);
define_therm_throt_sysdev_one_ro(package_throttle_count);
define_therm_throt_sysdev_show_func(package_power_limit, count);
define_therm_throt_sysdev_one_ro(package_power_limit_count);
static struct attribute *thermal_throttle_attrs[] = {
&attr_throttle_count.attr,
&attr_core_throttle_count.attr,
NULL
};
static struct attribute_group thermal_throttle_attr_group = {
static struct attribute_group thermal_attr_group = {
.attrs = thermal_throttle_attrs,
.name = "thermal_throttle"
};
#endif /* CONFIG_SYSFS */
#define CORE_LEVEL 0
#define PACKAGE_LEVEL 1
/***
* therm_throt_process - Process thermal throttling event from interrupt
* @curr: Whether the condition is current or not (boolean), since the
......@@ -106,39 +130,70 @@ static struct attribute_group thermal_throttle_attr_group = {
* 1 : Event should be logged further, and a message has been
* printed to the syslog.
*/
static int therm_throt_process(bool is_throttled)
static int therm_throt_process(bool new_event, int event, int level)
{
struct thermal_state *state;
unsigned int this_cpu;
bool was_throttled;
struct _thermal_state *state;
unsigned int this_cpu = smp_processor_id();
bool old_event;
u64 now;
struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
this_cpu = smp_processor_id();
now = get_jiffies_64();
state = &per_cpu(thermal_state, this_cpu);
if (level == CORE_LEVEL) {
if (event == THERMAL_THROTTLING_EVENT)
state = &pstate->core_throttle;
else if (event == POWER_LIMIT_EVENT)
state = &pstate->core_power_limit;
else
return 0;
} else if (level == PACKAGE_LEVEL) {
if (event == THERMAL_THROTTLING_EVENT)
state = &pstate->package_throttle;
else if (event == POWER_LIMIT_EVENT)
state = &pstate->package_power_limit;
else
return 0;
} else
return 0;
was_throttled = state->is_throttled;
state->is_throttled = is_throttled;
old_event = state->new_event;
state->new_event = new_event;
if (is_throttled)
state->throttle_count++;
if (new_event)
state->count++;
if (time_before64(now, state->next_check) &&
state->throttle_count != state->last_throttle_count)
state->count != state->last_count)
return 0;
state->next_check = now + CHECK_INTERVAL;
state->last_throttle_count = state->throttle_count;
state->last_count = state->count;
/* if we just entered the thermal event */
if (is_throttled) {
printk(KERN_CRIT "CPU%d: Temperature above threshold, cpu clock throttled (total events = %lu)\n", this_cpu, state->throttle_count);
if (new_event) {
if (event == THERMAL_THROTTLING_EVENT)
printk(KERN_CRIT "CPU%d: %s temperature above threshold, cpu clock throttled (total events = %lu)\n",
this_cpu,
level == CORE_LEVEL ? "Core" : "Package",
state->count);
else
printk(KERN_CRIT "CPU%d: %s power limit notification (total events = %lu)\n",
this_cpu,
level == CORE_LEVEL ? "Core" : "Package",
state->count);
add_taint(TAINT_MACHINE_CHECK);
return 1;
}
if (was_throttled) {
printk(KERN_INFO "CPU%d: Temperature/speed normal\n", this_cpu);
if (old_event) {
if (event == THERMAL_THROTTLING_EVENT)
printk(KERN_INFO "CPU%d: %s temperature/speed normal\n",
this_cpu,
level == CORE_LEVEL ? "Core" : "Package");
else
printk(KERN_INFO "CPU%d: %s power limit normal\n",
this_cpu,
level == CORE_LEVEL ? "Core" : "Package");
return 1;
}
......@@ -149,13 +204,32 @@ static int therm_throt_process(bool is_throttled)
/* Add/Remove thermal_throttle interface for CPU device: */
static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev)
{
return sysfs_create_group(&sys_dev->kobj,
&thermal_throttle_attr_group);
int err;
struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
err = sysfs_create_group(&sys_dev->kobj, &thermal_attr_group);
if (err)
return err;
if (cpu_has(c, X86_FEATURE_PLN))
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_core_power_limit_count.attr,
thermal_attr_group.name);
if (cpu_has(c, X86_FEATURE_PTS))
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_package_throttle_count.attr,
thermal_attr_group.name);
if (cpu_has(c, X86_FEATURE_PLN))
err = sysfs_add_file_to_group(&sys_dev->kobj,
&attr_package_power_limit_count.attr,
thermal_attr_group.name);
return err;
}
static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev)
{
sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group);
sysfs_remove_group(&sys_dev->kobj, &thermal_attr_group);
}
/* Mutex protecting device creation against CPU hotplug: */
......@@ -226,14 +300,50 @@ device_initcall(thermal_throttle_init_device);
#endif /* CONFIG_SYSFS */
/*
* Set up the most two significant bit to notify mce log that this thermal
* event type.
* This is a temp solution. May be changed in the future with mce log
* infrasture.
*/
#define CORE_THROTTLED (0)
#define CORE_POWER_LIMIT ((__u64)1 << 62)
#define PACKAGE_THROTTLED ((__u64)2 << 62)
#define PACKAGE_POWER_LIMIT ((__u64)3 << 62)
/* Thermal transition interrupt handler */
static void intel_thermal_interrupt(void)
{
__u64 msr_val;
struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
if (therm_throt_process((msr_val & THERM_STATUS_PROCHOT) != 0))
mce_log_therm_throt_event(msr_val);
if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT,
THERMAL_THROTTLING_EVENT,
CORE_LEVEL) != 0)
mce_log_therm_throt_event(CORE_THROTTLED | msr_val);
if (cpu_has(c, X86_FEATURE_PLN))
if (therm_throt_process(msr_val & THERM_STATUS_POWER_LIMIT,
POWER_LIMIT_EVENT,
CORE_LEVEL) != 0)
mce_log_therm_throt_event(CORE_POWER_LIMIT | msr_val);
if (cpu_has(c, X86_FEATURE_PTS)) {
rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
if (therm_throt_process(msr_val & PACKAGE_THERM_STATUS_PROCHOT,
THERMAL_THROTTLING_EVENT,
PACKAGE_LEVEL) != 0)
mce_log_therm_throt_event(PACKAGE_THROTTLED | msr_val);
if (cpu_has(c, X86_FEATURE_PLN))
if (therm_throt_process(msr_val &
PACKAGE_THERM_STATUS_POWER_LIMIT,
POWER_LIMIT_EVENT,
PACKAGE_LEVEL) != 0)
mce_log_therm_throt_event(PACKAGE_POWER_LIMIT
| msr_val);
}
}
static void unexpected_thermal_interrupt(void)
......@@ -335,8 +445,26 @@ void intel_init_thermal(struct cpuinfo_x86 *c)
apic_write(APIC_LVTTHMR, h);
rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
wrmsr(MSR_IA32_THERM_INTERRUPT,
l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
if (cpu_has(c, X86_FEATURE_PLN))
wrmsr(MSR_IA32_THERM_INTERRUPT,
l | (THERM_INT_LOW_ENABLE
| THERM_INT_HIGH_ENABLE | THERM_INT_PLN_ENABLE), h);
else
wrmsr(MSR_IA32_THERM_INTERRUPT,
l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
if (cpu_has(c, X86_FEATURE_PTS)) {
rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
if (cpu_has(c, X86_FEATURE_PLN))
wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
l | (PACKAGE_THERM_INT_LOW_ENABLE
| PACKAGE_THERM_INT_HIGH_ENABLE
| PACKAGE_THERM_INT_PLN_ENABLE), h);
else
wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
l | (PACKAGE_THERM_INT_LOW_ENABLE
| PACKAGE_THERM_INT_HIGH_ENABLE), h);
}
smp_thermal_vector = intel_thermal_interrupt;
......
......@@ -407,6 +407,13 @@ config SENSORS_CORETEMP
sensor inside your CPU. Most of the family 6 CPUs
are supported. Check documentation/driver for details.
config SENSORS_PKGTEMP
tristate "Intel processor package temperature sensor"
depends on X86 && PCI && EXPERIMENTAL
help
If you say yes here you get support for the package level temperature
sensor inside your CPU. Check documentation/driver for details.
config SENSORS_IBMAEM
tristate "IBM Active Energy Manager temperature/power sensors and control"
select IPMI_SI
......
......@@ -39,6 +39,7 @@ obj-$(CONFIG_SENSORS_AMS) += ams/
obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_PKGTEMP) += pkgtemp.o
obj-$(CONFIG_SENSORS_DME1737) += dme1737.o
obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
......
/*
* pkgtemp.c - Linux kernel module for processor package hardware monitoring
*
* Copyright (C) 2010 Fenghua Yu <fenghua.yu@intel.com>
*
* Inspired from many hwmon drivers especially coretemp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301 USA.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/hwmon.h>
#include <linux/sysfs.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
#include <linux/pci.h>
#include <asm/msr.h>
#include <asm/processor.h>
#define DRVNAME "pkgtemp"
enum { SHOW_TEMP, SHOW_TJMAX, SHOW_TTARGET, SHOW_LABEL, SHOW_NAME };
/*
* Functions declaration
*/
static struct pkgtemp_data *pkgtemp_update_device(struct device *dev);
struct pkgtemp_data {
struct device *hwmon_dev;
struct mutex update_lock;
const char *name;
u32 id;
u16 phys_proc_id;
char valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
int temp;
int tjmax;
int ttarget;
u8 alarm;
};
/*
* Sysfs stuff
*/
static ssize_t show_name(struct device *dev, struct device_attribute
*devattr, char *buf)
{
int ret;
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct pkgtemp_data *data = dev_get_drvdata(dev);
if (attr->index == SHOW_NAME)
ret = sprintf(buf, "%s\n", data->name);
else /* show label */
ret = sprintf(buf, "physical id %d\n",
data->phys_proc_id);
return ret;
}
static ssize_t show_alarm(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct pkgtemp_data *data = pkgtemp_update_device(dev);
/* read the Out-of-spec log, never clear */
return sprintf(buf, "%d\n", data->alarm);
}
static ssize_t show_temp(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct pkgtemp_data *data = pkgtemp_update_device(dev);
int err = 0;
if (attr->index == SHOW_TEMP)
err = data->valid ? sprintf(buf, "%d\n", data->temp) : -EAGAIN;
else if (attr->index == SHOW_TJMAX)
err = sprintf(buf, "%d\n", data->tjmax);
else
err = sprintf(buf, "%d\n", data->ttarget);
return err;
}
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, SHOW_TEMP);
static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp, NULL, SHOW_TJMAX);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, SHOW_TTARGET);
static DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL);
static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL);
static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME);
static struct attribute *pkgtemp_attributes[] = {
&sensor_dev_attr_name.dev_attr.attr,
&sensor_dev_attr_temp1_label.dev_attr.attr,
&dev_attr_temp1_crit_alarm.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
NULL
};
static const struct attribute_group pkgtemp_group = {
.attrs = pkgtemp_attributes,
};
static struct pkgtemp_data *pkgtemp_update_device(struct device *dev)
{
struct pkgtemp_data *data = dev_get_drvdata(dev);
unsigned int cpu;
int err;
mutex_lock(&data->update_lock);
if (!data->valid || time_after(jiffies, data->last_updated + HZ)) {
u32 eax, edx;
data->valid = 0;
cpu = data->id;
err = rdmsr_on_cpu(cpu, MSR_IA32_PACKAGE_THERM_STATUS,
&eax, &edx);
if (!err) {
data->alarm = (eax >> 5) & 1;
data->temp = data->tjmax - (((eax >> 16)
& 0x7f) * 1000);
data->valid = 1;
} else
dev_dbg(dev, "Temperature data invalid (0x%x)\n", eax);
data->last_updated = jiffies;
}
mutex_unlock(&data->update_lock);
return data;
}
static int get_tjmax(int cpu, struct device *dev)
{
int default_tjmax = 100000;
int err;
u32 eax, edx;
u32 val;
/* IA32_TEMPERATURE_TARGET contains the TjMax value */
err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
if (!err) {
val = (eax >> 16) & 0xff;
if ((val > 80) && (val < 120)) {
dev_info(dev, "TjMax is %d C.\n", val);
return val * 1000;
}
}
dev_warn(dev, "Unable to read TjMax from CPU.\n");
return default_tjmax;
}
static int __devinit pkgtemp_probe(struct platform_device *pdev)
{
struct pkgtemp_data *data;
int err;
u32 eax, edx;
#ifdef CONFIG_SMP
struct cpuinfo_x86 *c = &cpu_data(pdev->id);
#endif
data = kzalloc(sizeof(struct pkgtemp_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
dev_err(&pdev->dev, "Out of memory\n");
goto exit;
}
data->id = pdev->id;
#ifdef CONFIG_SMP
data->phys_proc_id = c->phys_proc_id;
#endif
data->name = "pkgtemp";
mutex_init(&data->update_lock);
/* test if we can access the THERM_STATUS MSR */
err = rdmsr_safe_on_cpu(data->id, MSR_IA32_PACKAGE_THERM_STATUS,
&eax, &edx);
if (err) {
dev_err(&pdev->dev,
"Unable to access THERM_STATUS MSR, giving up\n");
goto exit_free;
}
data->tjmax = get_tjmax(data->id, &pdev->dev);
platform_set_drvdata(pdev, data);
err = rdmsr_safe_on_cpu(data->id, MSR_IA32_TEMPERATURE_TARGET,
&eax, &edx);
if (err) {
dev_warn(&pdev->dev, "Unable to read"
" IA32_TEMPERATURE_TARGET MSR\n");
} else {
data->ttarget = data->tjmax - (((eax >> 8) & 0xff) * 1000);
err = device_create_file(&pdev->dev,
&sensor_dev_attr_temp1_max.dev_attr);
if (err)
goto exit_free;
}
err = sysfs_create_group(&pdev->dev.kobj, &pkgtemp_group);
if (err)
goto exit_free;
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
dev_err(&pdev->dev, "Class registration failed (%d)\n",
err);
goto exit_class;
}
return 0;
exit_class:
sysfs_remove_group(&pdev->dev.kobj, &pkgtemp_group);
exit_free:
kfree(data);
exit:
return err;
}
static int __devexit pkgtemp_remove(struct platform_device *pdev)
{
struct pkgtemp_data *data = platform_get_drvdata(pdev);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &pkgtemp_group);
platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
}
static struct platform_driver pkgtemp_driver = {
.driver = {
.owner = THIS_MODULE,
.name = DRVNAME,
},
.probe = pkgtemp_probe,
.remove = __devexit_p(pkgtemp_remove),
};
struct pdev_entry {
struct list_head list;
struct platform_device *pdev;
unsigned int cpu;
#ifdef CONFIG_SMP
u16 phys_proc_id;
#endif
};
static LIST_HEAD(pdev_list);
static DEFINE_MUTEX(pdev_list_mutex);
static int __cpuinit pkgtemp_device_add(unsigned int cpu)
{
int err;
struct platform_device *pdev;
struct pdev_entry *pdev_entry;
#ifdef CONFIG_SMP
struct cpuinfo_x86 *c = &cpu_data(cpu);
#endif
mutex_lock(&pdev_list_mutex);
#ifdef CONFIG_SMP
/* Only keep the first entry in each package */
list_for_each_entry(pdev_entry, &pdev_list, list) {
if (c->phys_proc_id == pdev_entry->phys_proc_id) {
err = 0; /* Not an error */
goto exit;
}
}
#endif
pdev = platform_device_alloc(DRVNAME, cpu);
if (!pdev) {
err = -ENOMEM;
printk(KERN_ERR DRVNAME ": Device allocation failed\n");
goto exit;
}
pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL);
if (!pdev_entry) {
err = -ENOMEM;
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
err);
goto exit_device_free;
}
#ifdef CONFIG_SMP
pdev_entry->phys_proc_id = c->phys_proc_id;
#endif
pdev_entry->pdev = pdev;
pdev_entry->cpu = cpu;
list_add_tail(&pdev_entry->list, &pdev_list);
mutex_unlock(&pdev_list_mutex);
return 0;
exit_device_free:
kfree(pdev_entry);
exit_device_put:
platform_device_put(pdev);
exit:
mutex_unlock(&pdev_list_mutex);
return err;
}
#ifdef CONFIG_HOTPLUG_CPU
static void pkgtemp_device_remove(unsigned int cpu)
{
struct pdev_entry *p, *n;
unsigned int i;
int err;
mutex_lock(&pdev_list_mutex);
list_for_each_entry_safe(p, n, &pdev_list, list) {
if (p->cpu != cpu)
continue;
platform_device_unregister(p->pdev);
list_del(&p->list);
kfree(p);
for_each_cpu(i, cpu_core_mask(cpu)) {
if (i != cpu) {
err = pkgtemp_device_add(i);
if (!err)
break;
}
}
break;
}
mutex_unlock(&pdev_list_mutex);
}
static int __cpuinit pkgtemp_cpu_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long) hcpu;
switch (action) {
case CPU_ONLINE:
case CPU_DOWN_FAILED:
pkgtemp_device_add(cpu);
break;
case CPU_DOWN_PREPARE:
pkgtemp_device_remove(cpu);
break;
}
return NOTIFY_OK;
}
static struct notifier_block pkgtemp_cpu_notifier __refdata = {
.notifier_call = pkgtemp_cpu_callback,
};
#endif /* !CONFIG_HOTPLUG_CPU */
static int __init pkgtemp_init(void)
{
int i, err = -ENODEV;
struct pdev_entry *p, *n;
/* quick check if we run Intel */
if (cpu_data(0).x86_vendor != X86_VENDOR_INTEL)
goto exit;
err = platform_driver_register(&pkgtemp_driver);
if (err)
goto exit;
for_each_online_cpu(i) {
struct cpuinfo_x86 *c = &cpu_data(i);
if (!cpu_has(c, X86_FEATURE_PTS))
continue;
err = pkgtemp_device_add(i);
if (err)
goto exit_devices_unreg;
}
if (list_empty(&pdev_list)) {
err = -ENODEV;
goto exit_driver_unreg;
}
#ifdef CONFIG_HOTPLUG_CPU
register_hotcpu_notifier(&pkgtemp_cpu_notifier);
#endif
return 0;
exit_devices_unreg:
mutex_lock(&pdev_list_mutex);
list_for_each_entry_safe(p, n, &pdev_list, list) {
platform_device_unregister(p->pdev);
list_del(&p->list);
kfree(p);
}
mutex_unlock(&pdev_list_mutex);
exit_driver_unreg:
platform_driver_unregister(&pkgtemp_driver);
exit:
return err;
}
static void __exit pkgtemp_exit(void)
{
struct pdev_entry *p, *n;
#ifdef CONFIG_HOTPLUG_CPU
unregister_hotcpu_notifier(&pkgtemp_cpu_notifier);
#endif
mutex_lock(&pdev_list_mutex);
list_for_each_entry_safe(p, n, &pdev_list, list) {
platform_device_unregister(p->pdev);
list_del(&p->list);
kfree(p);
}
mutex_unlock(&pdev_list_mutex);
platform_driver_unregister(&pkgtemp_driver);
}
MODULE_AUTHOR("Fenghua Yu <fenghua.yu@intel.com>");
MODULE_DESCRIPTION("Intel processor package temperature monitor");
MODULE_LICENSE("GPL");
module_init(pkgtemp_init)
module_exit(pkgtemp_exit)
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册