提交 a5b7474a 编写于 作者: L Lennert Buytenhek 提交者: Greg Kroah-Hartman

[PATCH] USB: ohci bits for the cirrus ep93xx

This patch adds OHCI glue bits for the USB host interface in the
Cirrus ep93xx (arm920t) CPU.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Acked-by: NDavid Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 d14feb5e
......@@ -23,6 +23,7 @@ config USB_ARCH_HAS_OHCI
default y if ARCH_LH7A404
default y if ARCH_S3C2410
default y if PXA27x
default y if ARCH_EP93XX
default y if ARCH_AT91RM9200
# PPC:
default y if STB03xxx
......
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
*
* Bus Glue for ep93xx.
*
* Written by Christopher Hoover <ch@hpl.hp.com>
* Based on fragments of previous driver by Russell King et al.
*
* Modified for LH7A404 from ohci-sa1111.c
* by Durgesh Pattamatta <pattamattad@sharpsec.com>
*
* Modified for pxa27x from ohci-lh7a404.c
* by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
*
* Modified for ep93xx from ohci-pxa27x.c
* by Lennert Buytenhek <buytenh@wantstofly.org> 28-2-2006
* Based on an earlier driver by Ray Lehtiniemi
*
* This file is licenced under the GPL.
*/
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/signal.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
static struct clk *usb_host_clock;
static void ep93xx_start_hc(struct device *dev)
{
clk_enable(usb_host_clock);
}
static void ep93xx_stop_hc(struct device *dev)
{
clk_disable(usb_host_clock);
}
static int usb_hcd_ep93xx_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
int retval;
struct usb_hcd *hcd;
if (pdev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug("resource[1] is not IORESOURCE_IRQ");
return -ENOMEM;
}
hcd = usb_create_hcd(driver, &pdev->dev, "ep93xx");
if (hcd == NULL)
return -ENOMEM;
hcd->rsrc_start = pdev->resource[0].start;
hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
usb_put_hcd(hcd);
retval = -EBUSY;
goto err1;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
pr_debug("ioremap failed");
retval = -ENOMEM;
goto err2;
}
usb_host_clock = clk_get(&pdev->dev, "usb_host");
ep93xx_start_hc(&pdev->dev);
ohci_hcd_init(hcd_to_ohci(hcd));
retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
if (retval == 0)
return retval;
ep93xx_stop_hc(&pdev->dev);
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
return retval;
}
static void usb_hcd_ep93xx_remove(struct usb_hcd *hcd,
struct platform_device *pdev)
{
usb_remove_hcd(hcd);
ep93xx_stop_hc(&pdev->dev);
clk_put(usb_host_clock);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
}
static int __devinit ohci_ep93xx_start(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
if ((ret = ohci_init(ohci)) < 0)
return ret;
if ((ret = ohci_run(ohci)) < 0) {
err("can't start %s", hcd->self.bus_name);
ohci_stop(hcd);
return ret;
}
return 0;
}
static struct hc_driver ohci_ep93xx_hc_driver = {
.description = hcd_name,
.product_desc = "EP93xx OHCI",
.hcd_priv_size = sizeof(struct ohci_hcd),
.irq = ohci_irq,
.flags = HCD_USB11 | HCD_MEMORY,
.start = ohci_ep93xx_start,
.stop = ohci_stop,
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
.get_frame_number = ohci_get_frame,
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
extern int usb_disabled(void);
static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev)
{
int ret;
ret = -ENODEV;
if (!usb_disabled())
ret = usb_hcd_ep93xx_probe(&ohci_ep93xx_hc_driver, pdev);
return ret;
}
static int ohci_hcd_ep93xx_drv_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
usb_hcd_ep93xx_remove(hcd, pdev);
return 0;
}
#ifdef CONFIG_PM
static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ochi_hcd *ohci = hcd_to_ohci(hcd);
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
ep93xx_stop_hc(&pdev->dev);
hcd->state = HC_STATE_SUSPENDED;
pdev->dev.power.power_state = PMSG_SUSPEND;
return 0;
}
static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int status;
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
ep93xx_start_hc(&pdev->dev);
pdev->dev.power.power_state = PMSG_ON;
usb_hcd_resume_root_hub(hcd);
return 0;
}
#endif
static struct platform_driver ohci_hcd_ep93xx_driver = {
.probe = ohci_hcd_ep93xx_drv_probe,
.remove = ohci_hcd_ep93xx_drv_remove,
#ifdef CONFIG_PM
.suspend = ohci_hcd_ep93xx_drv_suspend,
.resume = ohci_hcd_ep93xx_drv_resume,
#endif
.driver = {
.name = "ep93xx-ohci",
},
};
static int __init ohci_hcd_ep93xx_init(void)
{
return platform_driver_register(&ohci_hcd_ep93xx_driver);
}
static void __exit ohci_hcd_ep93xx_cleanup(void)
{
platform_driver_unregister(&ohci_hcd_ep93xx_driver);
}
module_init(ohci_hcd_ep93xx_init);
module_exit(ohci_hcd_ep93xx_cleanup);
......@@ -901,6 +901,10 @@ MODULE_LICENSE ("GPL");
#include "ohci-pxa27x.c"
#endif
#ifdef CONFIG_ARCH_EP93XX
#include "ohci-ep93xx.c"
#endif
#ifdef CONFIG_SOC_AU1X00
#include "ohci-au1xxx.c"
#endif
......@@ -919,6 +923,7 @@ MODULE_LICENSE ("GPL");
|| defined(CONFIG_ARCH_OMAP) \
|| defined (CONFIG_ARCH_LH7A404) \
|| defined (CONFIG_PXA27x) \
|| defined (CONFIG_ARCH_EP93XX) \
|| defined (CONFIG_SOC_AU1X00) \
|| defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
|| defined (CONFIG_ARCH_AT91RM9200) \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册