提交 a50d913f 编写于 作者: A Andrew Morton 提交者: Mauro Carvalho Chehab

V4L/DVB (4210a): git-dvb versus matroxfb

drivers/video/matrox/matroxfb_base.c: In function 'matroxfb_ioctl':
drivers/video/matrox/matroxfb_base.c:1140: error: 'VIDIOC_S_CTRL_OLD' undeclared (first use in this function)
drivers/video/matrox/matroxfb_base.c:1140: error: (Each undeclared identifier is reported only once                                                             drivers/video/matrox/matroxfb_base.c:1140: error: for each function it appears in.)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 b3bd5be8
......@@ -102,6 +102,8 @@
#include <linux/config.h>
#include <linux/version.h>
#define __OLD_VIDIOC_
#include "matroxfb_base.h"
#include "matroxfb_misc.h"
#include "matroxfb_accel.h"
......@@ -158,9 +160,9 @@ static void update_crtc2(WPMINFO unsigned int pos) {
/* Make sure that displays are compatible */
if (info && (info->fbcon.var.bits_per_pixel == ACCESS_FBINFO(fbcon).var.bits_per_pixel)
&& (info->fbcon.var.xres_virtual == ACCESS_FBINFO(fbcon).var.xres_virtual)
&& (info->fbcon.var.green.length == ACCESS_FBINFO(fbcon).var.green.length)
) {
&& (info->fbcon.var.xres_virtual == ACCESS_FBINFO(fbcon).var.xres_virtual)
&& (info->fbcon.var.green.length == ACCESS_FBINFO(fbcon).var.green.length)
) {
switch (ACCESS_FBINFO(fbcon).var.bits_per_pixel) {
case 16:
case 32:
......@@ -224,7 +226,7 @@ static irqreturn_t matrox_irq(int irq, void *dev_id, struct pt_regs *fp)
int matroxfb_enable_irq(WPMINFO int reenable) {
u_int32_t bm;
if (ACCESS_FBINFO(devflags.accelerator) == FB_ACCEL_MATROX_MGAG400)
bm = 0x220;
else
......@@ -241,7 +243,7 @@ int matroxfb_enable_irq(WPMINFO int reenable) {
mga_outl(M_IEN, mga_inl(M_IEN) | bm);
} else if (reenable) {
u_int32_t ien;
ien = mga_inl(M_IEN);
if ((ien & bm) != bm) {
printk(KERN_DEBUG "matroxfb: someone disabled IRQ [%08X]\n", ien);
......@@ -347,7 +349,7 @@ static void matrox_pan_var(WPMINFO struct fb_var_screeninfo *var) {
mga_setr(M_EXTVGA_INDEX, 0x00, p2);
}
matroxfb_DAC_unlock_irqrestore(flags);
update_crtc2(PMINFO pos);
CRITEND
......@@ -390,7 +392,7 @@ static void matroxfb_remove(WPMINFO int dummy) {
static int matroxfb_open(struct fb_info *info, int user)
{
MINFO_FROM_INFO(info);
DBG_LOOP(__FUNCTION__)
if (ACCESS_FBINFO(dead)) {
......@@ -406,7 +408,7 @@ static int matroxfb_open(struct fb_info *info, int user)
static int matroxfb_release(struct fb_info *info, int user)
{
MINFO_FROM_INFO(info);
DBG_LOOP(__FUNCTION__)
if (user) {
......@@ -854,7 +856,7 @@ static int matroxfb_get_vblank(WPMINFO struct fb_vblank *vblank)
vblank->flags |= FB_VBLANK_VBLANKING;
if (test_bit(0, &ACCESS_FBINFO(irq_flags))) {
vblank->flags |= FB_VBLANK_HAVE_COUNT;
/* Only one writer, aligned int value...
/* Only one writer, aligned int value...
it should work without lock and without atomic_t */
vblank->count = ACCESS_FBINFO(crtc1).vsync.cnt;
}
......@@ -870,7 +872,7 @@ static int matroxfb_ioctl(struct fb_info *info,
{
void __user *argp = (void __user *)arg;
MINFO_FROM_INFO(info);
DBG(__FUNCTION__)
if (ACCESS_FBINFO(dead)) {
......@@ -1081,7 +1083,7 @@ static int matroxfb_ioctl(struct fb_info *info,
case VIDIOC_QUERYCAP:
{
struct v4l2_capability r;
memset(&r, 0, sizeof(r));
strcpy(r.driver, "matroxfb");
strcpy(r.card, "Matrox");
......@@ -1091,7 +1093,7 @@ static int matroxfb_ioctl(struct fb_info *info,
if (copy_to_user(argp, &r, sizeof(r)))
return -EFAULT;
return 0;
}
case VIDIOC_QUERYCTRL:
{
......@@ -1690,8 +1692,8 @@ static int initMatrox2(WPMINFO struct board* b){
pci_read_config_dword(ACCESS_FBINFO(pcidev), PCI_COMMAND, &cmd);
mga_option &= 0x7FFFFFFF; /* clear BIG_ENDIAN */
mga_option |= MX_OPTION_BSWAP;
/* disable palette snooping */
cmd &= ~PCI_COMMAND_VGA_PALETTE;
/* disable palette snooping */
cmd &= ~PCI_COMMAND_VGA_PALETTE;
if (pci_dev_present(intel_82437)) {
if (!(mga_option & 0x20000000) && !ACCESS_FBINFO(devflags.nopciretry)) {
printk(KERN_WARNING "matroxfb: Disabling PCI retries due to i82437 present\n");
......@@ -1809,12 +1811,12 @@ static int initMatrox2(WPMINFO struct board* b){
if (fv) {
tmp = fv * (vesafb_defined.upper_margin + vesafb_defined.yres
+ vesafb_defined.lower_margin + vesafb_defined.vsync_len);
+ vesafb_defined.lower_margin + vesafb_defined.vsync_len);
if ((tmp < fh) || (fh == 0)) fh = tmp;
}
if (fh) {
tmp = fh * (vesafb_defined.left_margin + vesafb_defined.xres
+ vesafb_defined.right_margin + vesafb_defined.hsync_len);
+ vesafb_defined.right_margin + vesafb_defined.hsync_len);
if ((tmp < maxclk) || (maxclk == 0)) maxclk = tmp;
}
tmp = (maxclk + 499) / 500;
......@@ -1890,14 +1892,14 @@ static int initMatrox2(WPMINFO struct board* b){
/* there is no console on this fb... but we have to initialize hardware
* until someone tells me what is proper thing to do */
if (!ACCESS_FBINFO(initialized)) {
printk(KERN_INFO "fb%d: initializing hardware\n",
ACCESS_FBINFO(fbcon.node));
/* We have to use FB_ACTIVATE_FORCE, as we had to put vesafb_defined to the fbcon.var
* already before, so register_framebuffer works correctly. */
vesafb_defined.activate |= FB_ACTIVATE_FORCE;
fb_set_var(&ACCESS_FBINFO(fbcon), &vesafb_defined);
}
if (!ACCESS_FBINFO(initialized)) {
printk(KERN_INFO "fb%d: initializing hardware\n",
ACCESS_FBINFO(fbcon.node));
/* We have to use FB_ACTIVATE_FORCE, as we had to put vesafb_defined to the fbcon.var
* already before, so register_framebuffer works correctly. */
vesafb_defined.activate |= FB_ACTIVATE_FORCE;
fb_set_var(&ACCESS_FBINFO(fbcon), &vesafb_defined);
}
return 0;
failVideoIO:;
......@@ -2356,7 +2358,7 @@ static int __init matroxfb_setup(char *options) {
else if (!strncmp(this_opt, "dfp:", 4)) {
dfp_type = simple_strtoul(this_opt+4, NULL, 0);
dfp = 1;
}
}
#ifdef CONFIG_PPC_PMAC
else if (!strncmp(this_opt, "vmode:", 6)) {
unsigned int vmode = simple_strtoul(this_opt+6, NULL, 0);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册